MAPI failure Word 2013 --- Outlook 2010

One of my clients upgraded from Office 2010 to Office 2013, but had to keep using Outlook 2010 because Xobni doesn't work yet with 2013. When she tries to send a Word 2013 document as an attachment from within Word 2013 through Outlook 2010 she gets the
MAPI failure error message (link broken). Same document in Word 2010 works fine. Tried loading the pst into her Outlook 2013 as a test, and it worked. Seems specific to this combination. Any workaround? Manageable, but interferes with productivity and error
prone.

I had similar issue. I finally figured it out.
Rename Msmapi32.dll located in C:\Program Files (x86)\Common Files\System\MSMAPI\1033
I spent a few hours looking and found this:
http://support.microsoft.com/kb/926196/en-us
(Similar issue on Outlook 2003-2007)
Tried this and it worked for my Windows 7 Office 2010 issues after downgrading from 2013.

Similar Messages

Exchange 2013 - Outlook 2010 - 550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address

Hello,
I have issue when sending email to some addresses. Server respond with:
Remote Server returned '550 5.1.0 RESOLVER.ADR.InvalidInSmtp; encapsulated INVALID address inside an SMTP address (IMCEAINVALID-)'
My enviroment: Exchange 2013, Outlook 2010 - no cached mode. Issue happend with two email addresses but not always.
Any suggestion, how to resolve issue?
Thx.

Hi Tomas,
Does this issue occur in OWA? How is the impact, only one user or all users?
Please try to run Outlook under safe mode to avoid add-ins and AVs.
If there is any 3rd party add-ins, please try to disable them for testing.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

Windows XP Machines Always Prompt for Credentials (Exchange 2013, Outlook 2010)

I am running Exchange 2013 on Server 2012 Datacenter (VM). Windows 7 clients with Outlook 2010 work fine. Windows XP clients with Outlook 2010 prompt for credentials (user name and password) each time Outlook is started, and checking the "Remember
my password" box does not prevent this from happening the next time. The "Always prompt for logon credentials" checkbox on the "Security" tab of the "More Settings" section of the Exchange account is not checked. I have found a myriad of posts
with similar issues, but they all seem to have to do with SBS/Exchange 2007, and I haven't come across something that works as a solution for me. One suggested certificate issues, and I was having certificate security warnings, but I got that resolved.
I am hopefuly that the fact that this only happens on Windows XP will be telling.

Proxy settings:
auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp
auth_param ntlm children 50
auth_param ntlm keep_alive on
auth_param basic program /usr/lib/squid3/squid_ldap_auth -R \
-b "DC=domain,DC=local" \
-D "CN=Squid Proxy,OU=TI,OU=Domain,DC=domain,DC=local" \
-W passldap \
-f "sAMAccountName=%s" \
-h domain.local
auth_param basic children 20
auth_param basic realm Domain Internet Proxy
auth_param basic credentialsttl 8 hours
external_acl_type ADS children=50 ipv4 ttl=60 %LOGIN /usr/lib/squid3/squid_ldap_group -S -K -b "DC=domain,DC=local" -f "(&(objectclass=person)(sAMAccountName=%v)(memberof =CN=%a,OU=Domain,DC=domain,DC=local))" -D "CN=Squid Proxy,OU=TI,OU=Domain,DC=domain,DC=local" -s sub -W ldappass domain.local
tks.

Exchange Server 2013 / Outlook 2010 Auto-Complete address problems

Hi
We run an Exchange 2013 environment where end users use Outlook 2010.
For some reason several users (at least 5 so far, maybe more that haven't noticed yet) are complaining that they are now unable to add any additional address to the Auto-Complete cache. This can be resolved manually by emptying the cache from within
Outlook then disabling and re-enabling auto-complete but obviously they then have a blank slate.
My question is - is there anything that can cause this type of problem collectively? I have seen it previously, but occurrences have always been isolated to an individual user.
Thanks in advance
M

Hello,
You can try use NK2View tool to modify your Outlook Auto Complete Addresses.
With NK2View you can delete unwanted email addresses from your autocomplete file and add new addresses from your address book as well as edit current email address entries. And NK2View is a free download from NirSoft and you can get the software by going
to their website.
Besides, the auto-complete cache is a outlook feature, I recommend you post your issue to outlook forum.
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Excahgne 2013 outlook 2010 don't update folders from exchange server, from owa send and receive is ok

I have exchange 2013 server, with database for each department last week we have power problem, servers down
after servers goes on line, i have database with dirty shutdown, cant mount it, then i do eseutil/p, then i mount it, then all users access there mails from outlook 2010 they can send and receive, except one user cant receive new mail to outlook but he can
send mails from outlook (in outlook the folder last update 22april), from owa he receive anew mails and can send,
i try to delete outlook profile and create it again i get folder has not yet been updated
i try to repair exchange database again, but the same problem
i try to move it to another database or another server but move fail
if i use outlook online (remove use cached mode) its receive new mails.
Any help?
Thanks

Hi,
What’s the user impact? If the issue only occur on specific users, I suggest we firstly take the troubleshooting from the client side.
If the issue occurs to all the users, it’s seems the Outlook sync issue with the CAS server, not like a database issue. Do you configure the NLB for the CAS server?
Thanks,
Simon Wu
TechNet Community Support

Exchange 2013 + Outlook 2010, Security Alert

A small customer has Outlook 2010 connecting to Exchange Server 2013 on a Windows 2008
R2 server at a remote site. Recently, the users began receiving a security
alert ("The identity of this web site or the integrity of this connection
cannot be verified", "The name on the security certificate is invalid
or does not match the name of the site"). This occurs every time a user
opens Outlook, and when they click on "Yes" they are able to use
Outlook normally. <o:p></o:p>
This problem began not long after 1) the wildcard ssl certificate was renewed and 2)
Exchange 2013 was updated to the most recent SP and CU. It is noteworthy that
the PCs being used are not members of the domain. The users also receive this
error if they use Outlook to connect from their home PCs. <o:p></o:p>
The Exchange server passes connectivity and autodiscover tests. I have checked all the URLs
in Exchange Server. I have tried changing authentication, re-enabling the the
*.domain.ca certificate, I have not been able to reproduce the error on my own
laptop from the customer's site. <o:p></o:p>
This problem is not critical, but it is annoying for the users, and I have tried
just about everything I can find on the Internet to resolve it. <o:p></o:p>
Any suggestions? <o:p></o:p>

Hi,
Please run the following command to set the CertPrincipalName parameter which specifies the Secure Sockets Layer (SSL) certificate principal name required for connecting to Exchange from an external location to have a try:
Set-OutlookProvider EXPR -CertPrincipalName msstd:*.domain.ca
If the issue persists, please follow the steps below to check Exchange services for the problematic users :
Open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar -
Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
Please collect the information in the Log tab and Results tab.
Regards,
Winnie Liang
TechNet Community Support

Exchange 2010 - Exchange 2013 Outlook 2010 resolves wrong server

Hello,
We are upgrading from exchange 2010 to 2013.
Now I have migrated a testmailbox, but when I try to configure it in outlook it tries to connect to the Exchange 2010 server instead of the Exchange 2013 server.
I have configured outlook manually like described on the following url:
http://www.zerohoursleep.com/2013/02/manual-outlook-configuration-with-exchange-2013/
At the "Check Name" step, it will not resolve the Exchange 2013 server guid but the Exchange 2010 server... but the mailbox is migrated to Exchange 2013...
When I try to launch outlook an error occurs: Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data
file (.ost)."
Can someone help me out please?
Thx!

Are you sure the mailbox move completed? What happens when you log into OWA? Are you having AD replication issues in your environment?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Exchange 2013 / Outlook 2010+ Attachment size limit

I have an issue with my Exchange 2013 deployment. I am unable to send attachments over 10MB. I know, I know not another one of those threads, but I promise I have searched for a solution to my issue as best I can before posting.
So in the EMC I have set the Send/Receive connectors to unlimited, I have set the organizational limits to unlimited, I have even set both the Internal and ExternalDsnMaxMessageAttachSize
to 2047MB.
I have restarted the the Exchange Transport service, failing that I restarted the Exchange Box. I have closed and opened my Outlook Client Several times but when ever
I select an attachment over 10MB I get the message "The Attachment size exceed the allowable limit"
There must be something I am missing but I can't see it. I did also check my (and other) user accounts to confirm that no limits had somehow been set, they are all unconfigured or
blank in the EMC which my research has told means there is no limit on the account.
Now I know in in non exchange environment there are limits on the client, but attached to an exchange server these limits are supposed to be driven by exchange.
Here is the output of Get-TransportConfig
AddressBookPolicyRoutingEnabled : False
AnonymousSenderToRecipientRatePerHour : 1800
ClearCategories : True
ConvertDisclaimerWrapperToEml : False
DSNConversionMode : UseExchangeDSNs
JournalArchivingEnabled : False
ExternalDelayDsnEnabled : True
ExternalDsnDefaultLanguage :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize : 1.999 GB (2,146,435,072 bytes)
ExternalDsnReportingAuthority :
ExternalDsnSendHtml : True
ExternalPostmasterAddress :
GenerateCopyOfDSNFor : {}
HygieneSuite : Standard
InternalDelayDsnEnabled : True
InternalDsnDefaultLanguage :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize : 1.999 GB (2,146,435,072 bytes)
InternalDsnReportingAuthority :
InternalDsnSendHtml : True
InternalSMTPServers : {}
JournalingReportNdrTo : <>
LegacyJournalingMigrationEnabled : False
LegacyArchiveJournalingEnabled : False
LegacyArchiveLiveJournalingEnabled : False
RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
RedirectDLMessagesForLegacyArchiveJournaling : False
MaxDumpsterSizePerDatabase : 18 MB (18,874,368 bytes)
MaxDumpsterTime : 7.00:00:00
MaxReceiveSize : Unlimited
MaxRecipientEnvelopeLimit : 500
MaxRetriesForLocalSiteShadow : 2
MaxRetriesForRemoteSiteShadow : 4
MaxSendSize : Unlimited
MigrationEnabled : False
OpenDomainRoutingEnabled : False
RejectMessageOnShadowFailure : False
Rfc2231EncodingEnabled : False
SafetyNetHoldTime : 2.00:00:00
ShadowHeartbeatFrequency : 00:02:00
ShadowMessageAutoDiscardInterval : 2.00:00:00
ShadowMessagePreferenceSetting : PreferRemote
ShadowRedundancyEnabled : True
ShadowResubmitTimeSpan : 03:00:00
SupervisionTags : {Reject, Allow}
TLSReceiveDomainSecureList : {}
TLSSendDomainSecureList : {}
VerifySecureSubmitEnabled : False
VoicemailJournalingEnabled : True
HeaderPromotionModeSetting : NoCreate
Xexch50Enabled : True
Thanks in advance for any assistance.
Carl

I have an issue with my Exchange 2013 deployment. I am unable to send attachments over 10MB. I know, I know not another one of those threads, but I promise I have searched for a solution to my issue as best I can before posting.
So in the EMC I have set the Send/Receive connectors to unlimited, I have set the organizational limits to unlimited, I have even set both the Internal and ExternalDsnMaxMessageAttachSize
to 2047MB.
I have restarted the the Exchange Transport service, failing that I restarted the Exchange Box. I have closed and opened my Outlook Client Several times but when ever
I select an attachment over 10MB I get the message "The Attachment size exceed the allowable limit"
There must be something I am missing but I can't see it. I did also check my (and other) user accounts to confirm that no limits had somehow been set, they are all unconfigured or
blank in the EMC which my research has told means there is no limit on the account.
Now I know in in non exchange environment there are limits on the client, but attached to an exchange server these limits are supposed to be driven by exchange.
Here is the output of Get-TransportConfig
AddressBookPolicyRoutingEnabled : False
AnonymousSenderToRecipientRatePerHour : 1800
ClearCategories : True
ConvertDisclaimerWrapperToEml : False
DSNConversionMode : UseExchangeDSNs
JournalArchivingEnabled : False
ExternalDelayDsnEnabled : True
ExternalDsnDefaultLanguage :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize : 1.999 GB (2,146,435,072 bytes)
ExternalDsnReportingAuthority :
ExternalDsnSendHtml : True
ExternalPostmasterAddress :
GenerateCopyOfDSNFor : {}
HygieneSuite : Standard
InternalDelayDsnEnabled : True
InternalDsnDefaultLanguage :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize : 1.999 GB (2,146,435,072 bytes)
InternalDsnReportingAuthority :
InternalDsnSendHtml : True
InternalSMTPServers : {}
JournalingReportNdrTo : <>
LegacyJournalingMigrationEnabled : False
LegacyArchiveJournalingEnabled : False
LegacyArchiveLiveJournalingEnabled : False
RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
RedirectDLMessagesForLegacyArchiveJournaling : False
MaxDumpsterSizePerDatabase : 18 MB (18,874,368 bytes)
MaxDumpsterTime : 7.00:00:00
MaxReceiveSize : Unlimited
MaxRecipientEnvelopeLimit : 500
MaxRetriesForLocalSiteShadow : 2
MaxRetriesForRemoteSiteShadow : 4
MaxSendSize : Unlimited
MigrationEnabled : False
OpenDomainRoutingEnabled : False
RejectMessageOnShadowFailure : False
Rfc2231EncodingEnabled : False
SafetyNetHoldTime : 2.00:00:00
ShadowHeartbeatFrequency : 00:02:00
ShadowMessageAutoDiscardInterval : 2.00:00:00
ShadowMessagePreferenceSetting : PreferRemote
ShadowRedundancyEnabled : True
ShadowResubmitTimeSpan : 03:00:00
SupervisionTags : {Reject, Allow}
TLSReceiveDomainSecureList : {}
TLSSendDomainSecureList : {}
VerifySecureSubmitEnabled : False
VoicemailJournalingEnabled : True
HeaderPromotionModeSetting : NoCreate
Xexch50Enabled : True
Thanks in advance for any assistance.
Carl
1. If you send a message larger than 10MB from an external client to your org, does it bounce back because its over the limit?
2. Do you see the same problem sending internally with OWA?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Is there a way to programmatically save a Word 2013 document into a Word 2010 in compatibility mode?

Hi,
I have a Word 2013 document that I want to open in Word 2010. The problem is this document has a repeating section content control and if I open it in Word 2010, the content control is removed so the data won't be seen. Is there any way programmatically
to save the document in Word 2010 compatible mode? So that I can open in both Word 2013 and 2010. By the way, I'm using C# and OpenXML for this.
Thanks.

Hi,
Based on my tested, I created a "Rich Text" content control in Word 2013, and it'll works fine in Word 2010.
As far as I know, in Word 2013, content controls provide three key improvements: improved visualization, support for XML Mapping for Rich Text content controls, and a new content control for repeating content.
Please see the article "What's new with content controls in Word 2013" it may be helpful to you.
If you have any further question about coding/programing, please post your question to MSDN forum.
http://social.msdn.microsoft.com/Forums/en-US/home?forum=worddev&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support

Passive Sentences always returns 0 in Readability Stats - Word 2013

Is there are workaround for the Passive sentences issue in Readability stats? I have seen this issue mentioned going back over several years, but no working answer. The following code always returns zero, but grammar checker does not:
Sub Stats()
Dim Stats As String
For Each rs In ActiveDocument.Content.ReadabilityStatistics
Stats = Stats + rs.Name & " - " & rs.Value & vbCr
Next rs
MsgBox Stats, vbOKOnly, "Readability Statistics"
Stats = ""
End Sub
If there is no fix in Word, does anyone know of a good third party option? We would like to have statistics in a comment on a paragraph by paragraph level.
Thanks,
Marc Wiener
Gartner, Inc.
Marc Wiener

Hi Marc,
Base on my test in word 2013 and 2010, I can reproduce that issue too, others work fine except passive sentences.
On the other hand, I don't find third party option.
I'm trying to involve some senior engineers into this issue and it will take some time. Your patience will be greatly appreciated.
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can not open Word 2010 docx in Word 2013 from Outlook 2013 mail

Hello,
I got a mail on outlook with a word 2010 attachment in docx format.
Open this attachment with double click will show only the welcome screen with the text Open in protected mode.
With process monitor I could that word 2013 in an endless loop and tries to create the registry key
"HKCU\Software\Microsoft\Office\15.0\Word\Options\Vprsu" in an loop.
The result is always ACCESS DENIED.
When I create this key manually there will be an loop to create the registry key
"HKCU\Software\Policies\Microsoft\office\15.0\word\options\Assist".
The result is always ACCESS DENIED.
When I create this key manually. Word show the attachment immediatelly.
Closing Word and open the attachment again will delete this registry key and the cycle starts again.
Is there a hotfix available that will repair this?
I think this is an error in word 2013 protected view.
Disabling the protected view will help, but is not an good solution.
Is there any other workarround?
Screenshot from process monitor:
Best Regards,
Dieter

This issue may occur if the default file associations for Word are damaged. You may repair Office 2013 to restore the file associations and check if that helps. Refer to the link below for more information. You may restart
the computer once the repair is done.
http://office.microsoft.com/en-us/project-help/repair-or-remove-office-HA010357402.aspx
Note: Close all Office applications before you perform the repair.

Word couldn't send mail because of MAPI failure, Unspecified error.

This issue is crossposted in Microsoft Answers Word and OUTLOOK. I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
I dabble with VBA and write and maintain several amateur Word Add-Ins. Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC. They get along fine. However, I am unable to "Share" or "Send" an open Word
document as an E-mail attachment in any version! In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment. I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
I have repaired all Office versions. I have removed the registry keys for all office versions and repaired all versions again. I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
to ensure that the MAPI32.DLL file is not corrupt. In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
So what is this "Unspecified error?" This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer. These "canned" solutions might have
fixed the issue at one point, but they don't work now. At least not for me.
Thanks.
Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

Hello Greg,
I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
http://support.microsoft.com/kb/291152/EN-US
KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
http://support.microsoft.com/kb/929362/EN-US
Please let me know the following:
1. What version of Outlook are you using?
2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
3. If you close/reopen Word and then try the send again, do you get the same error?
4. Are you running either Outlook or Word in an elevated mode?
5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
6. Do you get the same error when using File > Share > Email as attachment using Excel?
7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
8. Does the issue occur in selective startup mode?
Steps to setup selective startup mode:
Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
Services Tab:
- Check the option 'Hide All Microsoft Services'
- Click on button 'Disable All'
Startup Tab:
- Click the button 'Disable All'
- Go back through the list and enable any Microsoft items
Click Ok. It will say “You must restart your computer for some of the changes
made by System Configuration to take effect”. Hit the ‘Restart’ button.
When the PC reboots try to run your test again.
To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
Regards,
Dennis

Microsoft Outlook 2010 & 2013 cannot set automatic reply settings

Hello,
We cannot seem to set automatic reply's within outlook 2010 & 2013. We have an exchange server 2010. We
can setup automatic reply through OWA absolutely fine. The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.
However we can setup out of office on any other office version below 2010 fine. We have run through
a number of tests and have come to the conclusion that the auto discover service is not configured correctly. I have been told to run through the following
"We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
name:
Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
POP,IMAP,SMTP,IIS
Then restart IIS service
to apply the changes.
If the user is connect
to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
to make your autodiscover succeed in last steps of Srv Record lookup method".
So I followed this and opened Exchange Managemnet Shell and ran the following.....
'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
The following output was displayed:
"VERBOSE: Connecting to SERVER2011.EXCHANGE.local
VERBOSE: Connected to SERVER2011.EXCHANGE.local.
[PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
MAP,SMTP,IIS
WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
following receive/send connectors match that FQDN: Default SERVER2011.
WARNING: This certificate will not be used for external TLS connections with an FQDN of
'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
'67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
Windows SBS Internet Receive SERVER2011, Fax/Printer.
Confirm
Overwrite the existing default SMTP certificate?
Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):"
I opened up 'Internet Information
Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
I opened up the Exchange Management
Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
I need to know if it is okay to proceed in replacing the certificate and running this
command.
Thank you

Hi,
We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
Hope this helps.

How can i use MS Word 2013 Templete in MS office 2010

I have a situation where I have to able to give the Word templete to the customer who is using MS Office 2010 as well as 2013.
Now i have created a word templete (added schema reference from xml Mapping menu) using MS office 2013.When i try to do changes on word document in MS 2010.It is not finding the schema reference.
Note :
Just downgraded our Office suite from 2013 to 2010 on our terminal server to find out that I cannot make changes to the default templates in the 2010 version because it’s an older word doc and it wont save the
content controls, when I make a change and save it. It wants to upgrade to a .docx each time and this app doesn’t seem to look for the .docx
Can any one suggestion me why word templete not having schema reference if I open the doc in Ms office 2010.
And How can i make it work with both in Ms office 2010 & 2013.
Thanks,
kavitha

To get the best answer to your question, I recommend you follow Ms. Meister's advice and post your question(s) on this in the
Word Answers forum. More people will see it. If you do this, please put a link in this thread to the new question.
Word 2013 documents work fine in Word 2010, 2007, and 2003, for that matter. Word 2013-specific features do not work in those earlier versions.
You may find the tools provided by Graham Mayor and Greg Maxey helpful. They provide for linked content controls that work in Word 2007-2013.
Content Control/Variable/Bookmark and Document Property Tools
There is a version especially for Word 2013 but I don't think it's documents will be backward-compatible either.
Add, Map and Employ Repeating Section Content Controls in Word 2013
Charles Kenyon Madison, WI

HTML Form Not Displaying Correctly in Outlook 2010 (Exchange 2013)

Hello,
I have recently migrated to Exchange 2013. Clients are still using Outlook 2010. There is an application that automatically sends an HTML form by email for the users to fill in. The form consists of radio buttons, text areas and drop down list. However,
in Outlook 2010, the form is not rendered properly.
When I clicked the "If there are problems with how this message is displayed, click here to view it in a web browser" link, the email is opened in
IE and the form is displayed correctly.
I also tried opening the same email in other clients, such as Thunderbird, Apple Mail Client and in mobile phones - the form is displayed correctly. I wonder
why it fails to do so in Outlook 2010. The user mentioned that this does not happen in Outlook 2003 and prior to migration (I used Exchange 2010 previously). I have also tried using OWA, but the form does not display correctly
Any help?
Note: I can't attach any images or links as it is mentioned that my account is not verified yet. I will post some screenshots when it is possible to do so

Hi
Outlook 2007 or newer use Microsoft Word for their HTML engine.
You can refer this page http://www.campaignmonitor.com/css/ shows
many things that do not work in different clients.I think Someone needs to re-code
the HTML form to make it work in the current versions of Outlook. You can try formatting with text and HTML and see the results.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

MAPI failure Word 2013 --- Outlook 2010

Similar Messages

Maybe you are looking for