MapiExceptionJetErrorPageNotInitialized: Unable to mount database. (hr=0x80004005, ec=-1019)

Hi,
Can any one help to resolve the database dismount error fixing?
MapiExceptionJetErrorPageNotInitialized: Unable to mount database. (hr=0x80004005, ec=-1019)
Tried..rebooted server and then tried to set-adserversettings -preferredtargetserver with correct DC
But, still unable to mount database successfully. Unfortunately, we dont have backup for this mailbox database as it's more than 1 TB size database.
MD

Hi,
Here is the error event id in server:-
Log Name:      Application
Source:        ESE
Date:          7/18/2014 2:20:58 PM
Event ID:      419
Task Category: Logging/Recovery
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MB04.domain.Com
Description:
Information Store (3548) mbx-archive1: Unable to read page 36249103 of database Q:\mbx-archive1\mbx-archive1.edb. Error -1019.
Database size is 1TB, is there anyway to repair it? any idea how many days will take for repair the database through esutil tool?
Please help
MD
Most likely not.  What's done is done.  Make sure the hardware is OK or you will end up in the same boat.......
Make a copy of the DB and all the logs before doing anything. 
Then you can do the /P  - and it will take several hours.
Make another copy
Once that completes, then do a /D to remove the cut page links.  That will also take several hours.
fingers crossed....
You can also make a support case with us - if this is valuable data it's worth the cost!
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne 
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)

    We are on Exchange 2007
    We have one database that will not mount. Whenever we try to mount we get the below error
    Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
    I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
    Initiating FILE DUMP mode...
             Database: SG3-DB.edb
            File Type: Database
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,12
     Engine ulVersion: 0x620,12
    Created ulVersion: 0x620,12
         DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
             cbDbPage: 8192
               dbtime: 3942751903 (0xeb019e9f)
                State: Clean Shutdown
         Log Required: 0-0 (0x0-0x0)
        Log Committed: 0-0 (0x0-0x0)
       Streaming File: No
             Shadowed: Yes
           Last Objid: 877765
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
    Please help us on how to clear this error and mount the database.

    We are on Exchange 2007
    We have one database that will not mount. Whenever we try to mount we get the below error
    Exchange is unable to mount the database that you specified. Specified database: EXG01\SG3-DB\SG3-DB; Error code: MapiExceptionJetDatabaseCorruption: Unable to mount database. (hr=0x80004005, ec=-338)
    I ran the eseutil /mh against the DB & found the database to be in clean shutdown state. I moved all the log files and chk files to another location and tried mounting the DB but the very same error.
    Initiating FILE DUMP mode...
             Database: SG3-DB.edb
            File Type: Database
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,12
     Engine ulVersion: 0x620,12
    Created ulVersion: 0x620,12
         DB Signature: Create time:06/07/2011 00:22:54 Rand:482525 Computer:
             cbDbPage: 8192
               dbtime: 3942751903 (0xeb019e9f)
                State: Clean Shutdown
         Log Required: 0-0 (0x0-0x0)
        Log Committed: 0-0 (0x0-0x0)
       Streaming File: No
             Shadowed: Yes
           Last Objid: 877765
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
    Please help us on how to clear this error and mount the database.

  • Database can not mount in exchange server 2013 due to Unable to mount database. (hr=0x80004005, ec=-543)

    Hello All,
    Database can not mount. In this Database domain Administrator mailbox have.
    Please suggest. It's very important
    The error:
    [PS] C:\Windows\system32>Mount-Database -Identity MBX-01 -Force
    Confirm
    At least one committed transaction log file is missing. Mounting this database will result in data loss. If you can
    locate the missing log files, don't continue. Are you sure you want to continue?
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"): a
    Failed to mount database "MBX-01". Error: An Active Manager operation failed. Error: The database action failed.
    Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing: Unable to mount database.
    (hr=0x80004005, ec=-543)
    Diagnostic context:
        Lid: 65256
        Lid: 10722   StoreEc: 0xFFFFFDE1
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 45120   dwParam: 0x51FF5F0
        Lid: 57728   dwParam: 0x51FF68C
        Lid: 46144   dwParam: 0x51FF709
        Lid: 34880   dwParam: 0x51FF709
        Lid: 34760   StoreEc: 0xFFFFFDE1
        Lid: 41344   Guid: 1c2c8cab-ae3f-40c8-8024-ffc776b22360
        Lid: 35200   dwParam: 0x2EFC
        Lid: 46144   dwParam: 0x51FFA55
        Lid: 34880   dwParam: 0x51FFA55
        Lid: 56264   StoreEc: 0x1388
        Lid: 46280   StoreEc: 0xFFFFFDE1
        Lid: 1750    ---- Remote Context End ----
        Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: MBX-01, Server: EG-EXCHG-01.ABC.com]
        + CategoryInfo          : InvalidOperation: (MBX-01:ADObjectId) [Mount-Database], InvalidOperationException
        + FullyQualifiedErrorId : [Server=EG-EXCHG-01,RequestId=ca57e784-43c7-4357-9ab6-08881c87bb77,TimeStamp=9/18/2014 5
       :31:08 AM] [FailureCategory=Cmdlet-InvalidOperationException] 51350054,Microsoft.Exchange.Management.SystemConfigu
      rationTasks.MountDatabase
        + PSComputerName        : eg-exchg-01.ABC.com

    Hi,
    This issue indicate corrupted database or corrupted logs. I suggest you to check and repair the database or check and repair the database log.
    1. Check the state of database by following command: eseutil /mh "Path of the database"
    Ps: Default path of the database is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\Mailbox Database.edb”
    Default path of the log files is “C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\Mailbox Database\E00”
    2. If the state is in clean shutdown, move all the log files from the Transaction logs folder location and then mount the database.
    3. If the state is in dirty shutdown, check if the log files that is indicated as Logs required is available or not.
    4. You can run Eseutil ml “Path of the log file\e00” to make sure that the log files is required is in a Clean state. This command will help you check the health of all the log files in the location.
    5. If the log files are healthy, then try Soft recovery with the command Eseutil /r e00 /l ”Path of log files” /p “Path of the database” 
    Note:
    Make sure you make a backup of the database before attempting any kind of repairs
    6. Once the command completes successfully, then mount the database.
    7. In case the required log files are not available in a clean state or missing, either restore from a successful back up or perform Hard repair with defragment.
    Refer to this file about hard repair:
    http://gallery.technet.microsoft.com/Step-by-Step-Exchange-2013-f8bed401
    Hope this will be helpful for you

  • MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501)

    We have sbs 2011 standard. Yesterday. exchange public folder cannot be mounted. It show error :
    An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-501).
    I run eseutil /mh. it tells me dirty shutdown. I then run eseutil /p. to change to clean shutdown. It still have same error.  I try to use asiedit to remove public folder. It doesnot have delete option.
    Please help
    gary zhou

    Hi,
    I think you could look into the Event Viewer to verify whether there are some related errors or warnings included. I think it could be checkpoint here. At the same time, you need to run the Exchange Best Practice Analyzer to have a general health check of
    your server.
    Actually, you could delete the public folder in the ADSI Edit if you like,
    Open ADSI-Edit and got to configuration
    Navigate to this path:
    CN=Configuration,DC=DOMAIN,DC=LOCAL
    CN=Services
    CN=Microsoft Exchange
    CN=EXCHANGE_ORG
    CN=Administrative Groups
    CN=Exchange Administrative Group (FYDIBOHF23SPDLT)
    CN=Databases
    CN=PUBLIC_FOLDER_DATABASE
    Just like a figure below:
    Note: You need to make sure that there is no useful information included in the public folder database.
    Regards,
    James
    James Xiong
    TechNet Community Support

  • Exchange 2010 mount database ERROR: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216)

    Microsoft Exchange 错误
    装入数据库'Mailbox Database 0742827366'失败。
    Mailbox Database 0742827366
    失败
    错误:
    无法装入指定的数据库。指定的数据库 :Mailbox Database 0742827366；错误代码: 活动管理器操作失败。错误: 数据库操作失败。错误: 操作失败，出现消息: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216)
    。 [数据库: Mailbox Database 0742827366, 服务器: EX2K7.shelleson.ad]。
    活动管理器操作失败。错误: 数据库操作失败。错误: 操作失败，出现消息: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216)
    。 [数据库: Mailbox Database 0742827366, 服务器: EX2K7.shelleson.ad]
    活动管理器操作失败。错误: 操作失败，出现消息: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216)
    。 [服务器: EX2K7.shelleson.ad]
     Unable to mount database. (hr=0x80004005, ec=-1216)
    确定
    Pls Help！ what can I do.

    Hi
       Checked the state of database using command eseutil /mh.
    http://technet.microsoft.com/en-us/library/bb331958.aspx
       You also need put your case to chinese forum.
      http://social.technet.microsoft.com/Forums/zh-CN/exchangeserverzhchs/threads
    Terence Yu
    TechNet Community Support

  • Could not mount database (hr=0x80004005,ec=1108)

    Hi
    I know this question has been asked before but my issue is different..
    Exchange 2013 SP1 on Server 2012 R2
    Was in process of migration from Exchange 2010 SP3 to Exchange 2013 SP1
    Mail DB on d:\
    Log Files on E:\
    Since Migration was going....... No backups... :(
    my Logfiles HDD crashed and not the database is not mounting... getting error
    (hr=0x80004005,ec=1108)
    Following is the output of mount database
    Mount-Database -Identity maildb2013ex01
    Failed to mount database "maildb2013ex01". Error: An Active Manager operation failed. Error: The database action
    failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005,ec=1108)
    Diagnostic context:
        Lid: 65256
        Lid: 10722   StoreEc: 0x454
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 45120   dwParam: 0x1D7050
        Lid: 57728   dwParam: 0x1D710C
        Lid: 53632   dwParam: 0x1D7244
        Lid: 61824   dwParam: 0x1D7244
        Lid: 46144   dwParam: 0x1D7244
        Lid: 34880   dwParam: 0x1D7293
        Lid: 34760   StoreEc: 0xFFFFFDDA
        Lid: 41344   Guid: 90bc4584-670e-4231-beb8-372cc68a87fa
        Lid: 35200   dwParam: 0x2388
        Lid: 46144   dwParam: 0x1D75EE
        Lid: 34880   dwParam: 0x1D75EE
        Lid: 54472   StoreEc: 0x1388
        Lid: 42184   StoreEc: 0x454
        Lid: 1750    ---- Remote Context End ----
        Lid: 1047    StoreEc: 0x454      [Database: MailDB2013EX01, Server: Exchange01.local.saisystems.com]
        + CategoryInfo          : InvalidOperation: (MailDB2013EX01:ADObjectId) [Mount-Database], InvalidOperationExcep
       tion
        + FullyQualifiedErrorId : [Server=EX01,RequestId=cf57b110-08c1-4808-b773-a7f7f50d7dbf,TimeStamp=7/6/2014 8:3
       9:29 AM] [FailureCategory=Cmdlet-InvalidOperationException] AA4B49BB,Microsoft.Exchange.Management.SystemConfigura
      tionTasks.MountDatabase
        + PSComputerName        : ex01.local.domain.com
    Following is output of essutil
    eseutil /mh "D:\MailStore\MailDB\MailDB2013EX01.edb"
    Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
    Version 15.00
    Copyright (C) Microsoft Corporation. All Rights Reserved.
    Initiating FILE DUMP mode...
             Database: D:\MailStore\MailDB\MailDB2013EX01.edb
    DATABASE HEADER:
    Checksum Information:
    Expected Checksum: 0xe52a9911
      Actual Checksum: 0xe52a9911
    Fields:
            File Type: Database
             Checksum: 0xe52a9911
       Format ulMagic: 0x89abcdef
       Engine ulMagic: 0x89abcdef
     Format ulVersion: 0x620,20
     Engine ulVersion: 0x620,20
    Created ulVersion: 0x620,20
         DB Signature: Create time:05/03/2014 14:34:31.599 Rand:3476067128 Computer:
             cbDbPage: 32768
               dbtime: 75195 (0x125bb)
                State: Dirty Shutdown
         Log Required: 370149-370261 (0x5a5e5-0x5a655)
        Log Committed: 0-370262 (0x0-0x5a656)
       Log Recovering: 370262 (0x5a656)
      GenMax Creation: 07/05/2014 20:08:06.321
             Shadowed: Yes
           Last Objid: 446
         Scrub Dbtime: 0 (0x0)
           Scrub Date: 00/00/1900 00:00:00
         Repair Count: 0
          Repair Date: 00/00/1900 00:00:00.000
     Old Repair Count: 0
      Last Consistent: (0x3D,32,2D7)  05/04/2014 03:13:28.088
          Last Attach: (0x3E,2,268)  05/04/2014 03:14:06.633
          Last Detach: (0x0,0,0)  00/00/1900 00:00:00.000
        Last ReAttach: (0x5A651,2,0)  07/05/2014 20:07:29.961
                 Dbid: 1
        Log Signature: Create time:05/03/2014 14:34:31.505 Rand:657597575 Computer:
           OS Version: (6.2.9200 SP 0 NLS ffffffff.ffffffff)
    Previous Full Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
    Previous Incremental Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
    Previous Copy Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
    Previous Differential Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
    Current Full Backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
    Current Shadow copy backup:
            Log Gen: 0-0 (0x0-0x0)
               Mark: (0x0,0,0)
               Mark: 00/00/1900 00:00:00.000
         cpgUpgrade55Format: 0
        cpgUpgradeFreePages: 0
    cpgUpgradeSpaceMapPages: 0
           ECC Fix Success Count: none
       Old ECC Fix Success Count: none
             ECC Fix Error Count: none
         Old ECC Fix Error Count: none
        Bad Checksum Error Count: none
    Old bad Checksum Error Count: none
      Last checksum finish Date: 00/00/1900 00:00:00.000
    Current checksum start Date: 00/00/1900 00:00:00.000
          Current checksum page: 0
    Operation completed successfully in 1.16 seconds.
    The DB Size id 300GB, right now copying it to separate location
    Can someone enlighten me what next is to be done or how can I mount this DB without log files...
    will it mount without Logfiles???
    Thanks
    Bikram
    bikram

    Hi,
    According to your description, your problematic database is in dirty shutdown state and your soft repair ends with errors. In this case, I'd like to say, the dirty shutdown state may be caused by that the required log files are missing. Thus, I recommend
    you try the hard recovery by using  Eseutil /p or
    Eseutil /d /r.http://support.microsoft.com/kb/259851/en-us
    Thanks,
    Angela Shi
    TechNet Community Support

  • RAC control file has correpted, unable to mount database

    hi guru's,
    Im trying to startup my rac db, but it giving following error.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 233861120 bytes
    Fixed Size 2212088 bytes
    Variable Size 176164616 bytes
    Database Buffers 50331648 bytes
    Redo Buffers 5152768 bytes
    ORA-00221: error on write to control file
    ORA-00206: error in writing (block 1, # blocks 1) of control file
    ORA-00202: control file: '+CTRL/finance/controlfile/current.256.812371485'
    ORA-15081: failed to submit an I/O operation to a disk
    ORA-15081: failed to submit an I/O operation to a disk
    alert log:
    Errors in file /oradump/oradata/finance/dump/diag/rdbms/finance/finance1/trace/finance1_ora_11821.trc:
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group 2 on disk 1 allocation unit 78
    Errors in file /oradump/oradata/finance/dump/diag/rdbms/finance/finance1/trace/finance1_ora_11821.trc:
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 2 of virtual extent 0 logical extent 1 of file 256 in group 2 on disk 2 allocation unit 76
    Errors in file /oradump/oradata/finance/dump/diag/rdbms/finance/finance1/trace/finance1_ora_11821.trc:
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 3 of virtual extent 0 logical extent 2 of file 256 in group 2 on disk 3 allocation unit 78
    Errors in file /oradump/oradata/finance/dump/diag/rdbms/finance/finance1/trace/finance1_ora_11821.trc:
    ORA-00206: error in writing (block 1, # blocks 1) of control file
    ORA-00202: control file: '+CTRL/finance/controlfile/current.256.812371485'
    ORA-15081: failed to submit an I/O operation to a disk
    ORA-15081: failed to submit an I/O operation to a disk
    ORA-221 signalled during: ALTER DATABASE MOUNT...
    trace file:
    Trace file /oradump/oradata/finance/dump/diag/rdbms/finance/finance1/trace/finance1_ora_11821.trc
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
    Data Mining and Real Application Testing options
    ORACLE_HOME = /rdbms1/app/oracle/product/11.2.0/db_home/
    System name: Linux
    Node name: RAC-NODE1.vod.com
    Release: 2.6.18-128.el5
    Version: #1 SMP Wed Dec 17 11:41:38 EST 2008
    Machine: x86_64
    Instance name: finance1
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 28
    Unix process pid: 11821, image: [email protected] (TNS V1-V3)
    *** 2013-04-27 00:02:39.859
    *** SESSION ID:(1.3) 2013-04-27 00:02:39.859
    *** CLIENT ID:() 2013-04-27 00:02:39.859
    *** SERVICE NAME:() 2013-04-27 00:02:39.859
    *** MODULE NAME:([email protected] (TNS V1-V3)) 2013-04-27 00:02:39.859
    *** ACTION NAME:() 2013-04-27 00:02:39.859
    ORA-27041: unable to open file
    WARNING: IO Failed. group:2 disk(number.incarnation):1.0xe96d8019 disk_path:/dev/sdd2
    AU:78 disk_offset(bytes):81805312 io_size:16384 operation:Write type:asynchronous
    result:I/O error process_id:11821
    subsys:System iop:0x2b1c84e57250 bufp:0x2b1c84d6ce00 osderr:0x0 osderr1:0x0
    ORA-27041: unable to open file
    WARNING: IO Failed. group:2 disk(number.incarnation):2.0xe96d801a disk_path:/dev/sdd3
    AU:76 disk_offset(bytes):79708160 io_size:16384 operation:Write type:asynchronous
    result:I/O error process_id:11821
    subsys:System iop:0x2b1c84e57128 bufp:0x2b1c84d6ce00 osderr:0x0 osderr1:0x0
    ORA-27041: unable to open file
    WARNING: IO Failed. group:2 disk(number.incarnation):3.0xe96d8018 disk_path:/dev/sdd4
    AU:78 disk_offset(bytes):81805312 io_size:16384 operation:Write type:asynchronous
    result:I/O error process_id:11821
    subsys:System iop:0x2b1c84e57000 bufp:0x2b1c84d6ce00 osderr:0x0 osderr1:0x0
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 1 of virtual extent 0 logical extent 0 of file 256 in group 2 on disk 1 allocation unit 78
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 2 of virtual extent 0 logical extent 1 of file 256 in group 2 on disk 2 allocation unit 76
    ORA-15080: synchronous I/O operation to a disk failed
    WARNING: failed to write mirror side 3 of virtual extent 0 logical extent 2 of file 256 in group 2 on disk 3 allocation unit 78
    DDE rules only execution for: ORA 202
    ----- START Event Driven Actions Dump ----
    ---- END Event Driven Actions Dump ----
    ----- START DDE Actions Dump -----
    Executing SYNC actions
    ----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
    Successfully dispatched
    ----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (SUCCESS, 0 csec) -----
    Executing ASYNC actions
    ----- END DDE Actions Dump (total 0 csec) -----
    ORA-00206: error in writing (block 1, # blocks 1) of control file
    ORA-00202: control file: '+CTRL/finance/controlfile/current.256.812371485'
    ORA-15081: failed to submit an I/O operation to a disk
    ORA-15081: failed to submit an I/O operation to a disk
    all the diskgroups are in mount state only
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    ARCLOG MOUNTED
    CTRL MOUNTED
    DBFILE MOUNTED
    FRA MOUNTED
    REDO1 MOUNTED
    REDO2 MOUNTED
    VOTE MOUNTED
    since i did not have mirror copy or backup of current control file to replace the correpted one.
    Is there any way to create new control file and transfered to ASM diskgroup and open database. or i need to drop the existing database.
    if i need to drop the db, without open the db how to drop database.
    kindly help on this.
    Thanks in advance.

    Hi,
    Thanks for the replay. im able to open the db.
    But can you tel me how to make my rac db to open with spfile which is on asmdiskgroup.
    SQL> select name,state from v$asm_diskgroup;
    NAME STATE
    ARCLOG MOUNTED
    CTRL MOUNTED
    DBFILE MOUNTED
    FRA MOUNTED
    REDO1 MOUNTED
    REDO2 MOUNTED
    VOTE MOUNTED
    Spfile:
    ASMCMD [+DBFILE/FINANCE/PARAMETERFILE] > pwd
    +DBFILE/FINANCE/PARAMETERFILE
    ASMCMD [+DBFILE/FINANCE/PARAMETERFILE] > ls
    spfile.262.813843989
    i shutdown the db and up the same but it can't take the spfile.
    SQL> show parameter spfile
    NAME TYPE VALUE
    spfile string
    Thanks in advance.

  • Cannot mount database after force server restart.

    The server is hung. After forced reboot all databases was successfully mounted except one public folder, that gives an error:
    MapiExceptionSearchEvaluationInProgress: Unable to mount database. (hr=0x80004005, ec=1177)
    The error ocured on Exchange Server 2010 SP3 Standard Update Rollup 5.
    Update to Rollup 7 does not solve the problem.
    Eseutil 14.03 shows no errors.

    Move all the log files include all other files to another location and try to mount it.
    Post the update
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Exchange 2010 mount database after dirty shut down

    I have exchange 2010 where is all roles located on , i have only 1 database , this database is dismounted & unable to b re-mounted again with the following error
    Microsoft Exchange Error
    Failed to mount database 'Mailbox Database 0173462073'.
    Mailbox Database 0173462073
    Failed
    Error:
    Couldn't mount the database that you specified. Specified database: Mailbox Database 0173462073; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount
    database. (hr=0x80004005, ec=-550)
     [Database: Mailbox Database 0173462073, Server: Exchange2010.Egytrav.local].
    An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-550)
     [Database: Mailbox Database 0173462073, Server: Exchange2010.Egytrav.local]
    An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-550)
     [Server: Exchange2010.Egytrav.local]
    MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-550)
    OK
    all services is started correctly , i can stop & start normally , i could create new database & mounted ok
    any help?

    You said the database is definitely NOT mounted correct?
    the -1032 means something has a lock on the EDB file which would make sense if its locked
    If its not mounted then do you have another session open somewhere trying to take action on the EDB, copy it etc?
    Sometimes backup jobs can put a hold on a file, i.e. I have seen BUE do this and its quit aggravating because the job doesn't even have to be running
    If you cant find what has a lock on the file and your are absolutely sure its not mounted then use this file unlocker utility
    http://download.cnet.com/Unlocker/3000-2248_4-10493998.html
    Troy Werelius
    http://www.lucid8.com/

  • Unable to Mount Mailbox Databases

    I migrated a hyper v exchange server to a new hyper v host.  After the migration I am unable to get the mailbox databases to mount.  The error message I receive when I try to mount is:
    Error code: An active manager operation failed.  Erorr the database action failed.  Erorr: operation failed with the message: MapiExecptionAccess unable to mount database. hr=0x8007005, ec=-2147024891
    The server is running on 2008 R2 Enterprise
    Any help would be appreciated.
    Thanks 

    Hi,
    Maybe it is related to the TEMP & TMP environment variables, please try the below article to modify the temp folder. After that, please recreate the ActiveSync virtual directory to check the result. About how to rebuild virtual directory, you can refer
    to
    this article.
    PRB: CS0013 or CS0016 Compilation Errors in ASP.NET Web Applications
    http://support.microsoft.com/kb/825791
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • ORA-01102 unable to mount the database in exclisive mode

    Hi !
    My system run on oracle 10g R2 Windows 32 bit and I have configured 2 databases in data guard on the same computer. The primary database "smartbk" start very well but the standby database is not able to mount; when I issued the startup mount command I ge he error ORA -01102 unable to mount the database in exclisive mode.
    Can someone help please!!!

    Because your database is standby database, so you can not use startup mount,
    try this
    sql>startup nomount;
    sql>alter database mount standby database;

  • Unable to recover database after rman recovery and database open resetlogs

    I am running Oracle 10.2.0.5 on OpenSUSE 9. I have been trying to upgrade the database to 11g, through dbua. I was getting stuck at one point during the Oracle Server install and the upgrade failed and I was forced to restore the database to an earlier backup.
    Below is the current place that I am stuck. As you can see I opened the database multiple times and reset the logs. Now I am afraid that my controlfile and redo log backups are out of sync and i can't get them back on track. Before when I actually got the database recovered RMAN would immediately throw:
    RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
    RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
    OPA-00600: ORA-00600: internal error code, arguments: ...
    The database would open with ALTER DATABASE RESETLOGS but any query on non-system tables would fail and throw:
    ORA-04045: errors during recompilation/revalidation of LCRS_DEV1.FACILITY_REF
    ORA-00600: internal error code, arguments: [17069], [0x1158ED180], [], [], [],
    I hope I have not dug myself into too deep of a hole here.
    Here is the trace from my most recent attempt.
    RMAN> startup nomount;
    connected to target database (not started)
    Oracle instance started
    Total System Global Area 3070230528 bytes
    Fixed Size 2099424 bytes
    Variable Size 301991712 bytes
    Database Buffers 2751463424 bytes
    Redo Buffers 14675968 bytes
    RMAN> list incarnation of database;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of list command at 08/02/2011 15:49:04
    ORA-01507: database not mounted
    RMAN> restore controlfile from autobackup;
    Starting restore at 02-AUG-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    recovery area destination: /opt/oracle/flash_recovery_area
    database name (or database unique name) used for search: LCRSDEV
    channel ORA_DISK_1: autobackup found in the recovery area
    channel ORA_DISK_1: autobackup found: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
    channel ORA_DISK_1: control file restore from autobackup complete
    output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
    output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
    output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
    Finished restore at 02-AUG-11
    RMAN> alter database mount;
    database mounted
    released channel: ORA_DISK_1
    RMAN> list incarnation of database;
    List of Database Incarnations
    DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
    1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
    2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
    3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11
    4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11
    5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11
    6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11
    7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11
    8 8 LCRSDEV 756543625 CURRENT 95676701 02-AUG-11
    RMAN> restore database until scn 95676700;
    Starting restore at 02-AUG-11
    Starting implicit crosscheck backup at 02-AUG-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    Crosschecked 6 objects
    Finished implicit crosscheck backup at 02-AUG-11
    Starting implicit crosscheck copy at 02-AUG-11
    using channel ORA_DISK_1
    Finished implicit crosscheck copy at 02-AUG-11
    searching for all files in the recovery area
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 08/02/2011 15:52:04
    RMAN-20208: UNTIL CHANGE is before RESETLOGS change
    RMAN> restore database;
    Starting restore at 02-AUG-11
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile backupset restore
    channel ORA_DISK_1: specifying datafile(s) to restore from backup set
    restoring datafile 00001 to /opt/oracle/oradata/LCRSDEV/system01.dbf
    restoring datafile 00002 to /opt/oracle/oradata/LCRSDEV/undotbs01.dbf
    restoring datafile 00003 to /opt/oracle/oradata/LCRSDEV/sysaux01.dbf
    restoring datafile 00004 to /opt/oracle/oradata/LCRSDEV/users01.dbf
    restoring datafile 00005 to /opt/oracle/oradata/LCRSDEV/LCRS_TBS.dbf
    channel ORA_DISK_1: reading from backup piece /opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp
    channel ORA_DISK_1: restored backup piece 1
    piece handle=/opt/oracle/flash_recovery_area/LCRSDEV/backupset/2011_07_22/o1_mf_nnndf_TAG20110722T111922_72m8rc5x_.bkp tag=TAG20110722T111922
    channel ORA_DISK_1: restore complete, elapsed time: 00:23:36
    Finished restore at 02-AUG-11
    RMAN> recover database until scn 95676700;
    Starting recover at 02-AUG-11
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 08/02/2011 16:16:28
    RMAN-20208: UNTIL CHANGE is before RESETLOGS change
    RMAN> recover database;
    Starting recover at 02-AUG-11
    using channel ORA_DISK_1
    starting media recovery
    archive log thread 1 sequence 90 is already on disk as file /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
    archive log filename=/opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc thread=1 sequence=1
    unable to find archive log
    archive log thread=1 sequence=1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 08/02/2011 16:25:04
    RMAN-06054: media recovery requesting unknown log: thread 1 seq 1 lowscn 95676701

    Thanks for the reply Hemant. I have reset the database for the controlfile that I am using as backup and now I am not able to recover until the correct SCN. I am thinking that my recovery catalog is bad. If I mount with the current controlfile I have this list of incarnations:
    List of Database Incarnations
    DB Key  Inc Key DB Name  DB ID            STATUS  Reset SCN  Reset Time
    *1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05*
    *2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11*
    *3 3 LCRSDEV 756543625 PARENT 92348137 18-JUL-11*
    *4 4 LCRSDEV 756543625 PARENT 95654931 01-AUG-11*
    *5 5 LCRSDEV 756543625 PARENT 95675699 01-AUG-11*
    *6 6 LCRSDEV 756543625 PARENT 95676699 02-AUG-11*
    *7 7 LCRSDEV 756543625 PARENT 95676700 02-AUG-11*
    *8 8 LCRSDEV 756543625 PARENT 95676701 02-AUG-11*
    *9 9 LCRSDEV 756543625 CURRENT 95676702 02-AUG-11*
    However if I restore the controlfile to the earlier version I am getting the following output from the process:
    RMAN> startup nomount;
    connected to target database (not started)
    Oracle instance started
    Total System Global Area 3070230528 bytes
    Fixed Size 2099424 bytes
    Variable Size 301991712 bytes
    Database Buffers 2751463424 bytes
    Redo Buffers 14675968 bytes
    RMAN> restore controlfile from '/opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp';
    Starting restore at 03-AUG-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    channel ORA_DISK_1: restoring control file
    channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
    output filename=/opt/oracle/oradata/LCRSDEV/control01.ctl
    output filename=/opt/oracle/oradata/LCRSDEV/control02.ctl
    output filename=/opt/oracle/oradata/LCRSDEV/control03.ctl
    Finished restore at 03-AUG-11
    RMAN> alter database mount;
    database mounted
    released channel: ORA_DISK_1
    RMAN> list incarnation of database;
    List of Database Incarnations
    DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
    1 1 LCRSDEV 756543625 PARENT 1 22-OCT-05
    2 2 LCRSDEV 756543625 PARENT 525876 20-JAN-11
    3 3 LCRSDEV 756543625 CURRENT 92348137 18-JUL-11
    RMAN> restore database until scn 92348137;
    Starting restore at 03-AUG-11
    Starting implicit crosscheck backup at 03-AUG-11
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=156 devtype=DISK
    Crosschecked 1 objects
    Finished implicit crosscheck backup at 03-AUG-11
    Starting implicit crosscheck copy at 03-AUG-11
    using channel ORA_DISK_1
    Finished implicit crosscheck copy at 03-AUG-11
    searching for all files in the recovery area
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g3hn6o_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_2_73g3hnxq_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_01/o1_mf_1_1_73g0rts6_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_134_72v9gv4s_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_138_72v9p4b4_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_120_72v8wwg0_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_121_72v8x5ty_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_131_72v9cnrv_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_139_72v9q5ok_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_137_72v9n4t5_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_136_72v9l88q_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_123_72v8ytm8_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_132_72v9dcxd_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_124_72v8zkg0_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_128_72v96qm1_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_135_72v9jqmx_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_129_72v98q3r_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_125_72v91g3b_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_118_72v8v8r4_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_127_72v9626w_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_130_72v9bqtb_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_141_72vncy6g_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_122_72v8ycd4_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_126_72v94cns_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_133_72v9fb17_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_140_72vn6wgo_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_25/o1_mf_1_119_72v8v9hf_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j3wo01_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73josgf1_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jr20qc_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_2_73jh223h_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73josflf_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73jvqdqs_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_3_73josh91_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_08_02/o1_mf_1_1_73j91rh9_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_91_72mqlnx9_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_111_72mrdr5m_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_96_72mqx958_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_114_72mrgsf9_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_94_72mqs6gj_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_102_72mr3893_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_99_72mr2h6c_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_104_72mr5hfm_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_109_72mrc83z_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_98_72mr080w_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_93_72mqq36m_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_97_72mqz0mm_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_116_72mrk268_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_101_72mr31yv_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_110_72mrddhg_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_95_72mqv3hp_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_105_72mr5vq4_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_115_72mrjd2s_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_106_72mr7hnt_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_100_72mr2qfc_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_112_72mrfc5j_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_107_72mr909t_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_103_72mr4pol_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_113_72mrfsb9_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_117_72mrl5mf_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_108_72mrb13l_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_90_72ml85v3_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_22/o1_mf_1_92_72mqnxz1_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_143_72y6ww71_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_144_72ybybps_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_142_72xt10j7_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/archivelog/2011_07_26/o1_mf_1_145_72yccy5z_.arc
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758043324_73g3jfxx_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_01/o1_mf_s_758035850_73fw6vrc_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758133684_73jvr5px_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758127608_73jot9x0_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758109276_73j3xfom_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_08_02/o1_mf_s_758129928_73jr2s7p_.bkp
    File Name: /opt/oracle/flash_recovery_area/LCRSDEV/autobackup/2011_07_22/o1_mf_s_757164997_72m9rqw3_.bkp
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 08/03/2011 12:53:19
    RMAN-20208: UNTIL CHANGE is before RESETLOGS change
    Edited by: K Doyle on Aug 3, 2011 10:22 AM

  • ORA-011-2 cannot mount database in Exclusive mode

    This is brand new both Oracle 10g and SUSE 9.3 install. The installation went fine, no errors. At the end I tried to verify the installation:
    sqlplus /nolog
    SQL>connect / as sysdba
    Connected to an idle instance
    SQL>startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/opt/oracle/product/10g/dbs/initmydb.ora'
    SQL>
    So, I figured the missing initmydb file must be in different directory so I looked for it, started new shell session and entered this:
    ln -s @ORACLE_BASE/admin/orcl/pfile/initmydb.ora
    $ORACLE_HOME/dbs/initmydb.ora
    Now I get the following error:
    SQL>startup
    ORA-011-2 cannot mount database in Exclusive mode
    This is third time that I am triyng to install both SUSE and Oracle from scratch and I always run in the same problem, so you can only imagine how I feel.

    Now after reading many documents I am even more confused. The thing is, now I can connect to EM and manage database, create tables, etc, which means the database is up, right? However, I am unable to verify the database existance in sqlplus.
    First after I connect as sysdba in sqlplus, the console says "Connected to an idle instance". When I enter show sga sqlplus, the sqlplus displays 0. Startup comand will display error in the above post.
    So, the bottom line is, according to the EM the database is up and running (I can use isqlplus too) but not according to sqlplus on the server itself. What'sgoing on here? I've been reading every single paper on Oracle's and Novell SUSE web sites and couldn't find anything about it.

  • Mailbox migration failed: MapiExceptionJetErrorPageNotInitialized: Unable to find table row

    Hi Everyone,
    I'm trying to migrate mailboxes from 2010 -> 2013 and I've com across an odd error.
    I've put my skip limit to 5(for bad files), however this error seems to appear regardless. I'm not a Jets DB expert, but not being able to find a row seems quite serious. Any ideas?
    Data migrated: 1004 MB (1,052,931,906 bytes) 
    Migration rate: 0 B (0 bytes) 
    Error: MigrationPermanentException: Error: MapiExceptionJetErrorPageNotInitialized: Unable to find table row. (hr=0x80004005, ec=-1019) Diagnostic context: ...... Lid: 52176 ClientVersion: 15.0.516.30 Lid: 50032 ServerVersion: 14.3.123.2 Lid: 23226 --- ROP
    Parse Start --- Lid: 27962 ROP: ropGetContentsTable [5] Lid: 27962 ROP: ropSetColumns [18] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 27489 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 1238 Remote
    Context Overflow Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 6995 StoreEc: 0xFFFFFC05 PropTag: 0x67B50102 Lid: 4819 StoreEc: 0xFFFFFC05 Lid: 17692 Lid: 5587 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 13300
    StoreEc: 0xFFFFFC05 Lid: 21097 Lid: 39027 dwParam: 0x6BD Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 5459 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 6483 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 59073
    StoreEc: 0xFFFFFC05 Lid: 28220 Lid: 52321 StoreEc: 0xFFFFFC05 Lid: 46177 dwParam: 0xBFE629 Lid: 35937 StoreEc: 0xFFFFFC05 Lid: 44129 dwParam: 0x1183C6F Lid: 60513 StoreEc: 0xFFFFFC05 Lid: 48225 Lid: 9253 StoreEc: 0xFFFFFC05 Lid: 28104 Lid: 13861 StoreEc: 0xFFFFFC05
    Lid: 27265 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 27962 ROP: ropFindRow [79] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 23649 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
    26426 ROP: ropFindRow [79] Lid: 40685 StoreEc: 0xFFFFFC05 Lid: 28720 Lid: 11621 StoreEc: 0xFFFFFC05 Lid: 56781 StoreEc: 0xFFFFFC05 Lid: 21484 Lid: 23788 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0xFFFFFC05
    Lid: 29726 Lid: 18462 StoreEc: 0xFFFFFC05 

    Hi,
    From your description, if you specify a larger value for the bad items limit, this error will disappear. Then the issue should be related to the corrupt mailbox, such as the subfolder property and so on, you can use MFCMAPI to check them and then remove
    problematic folders.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Unable to Retrieve Database Settings in MDM 7.1 Console

    Hi,
    I have installed MDM7.1 on AIX and on DB2 successfully.
    Installed MDM Console 7.1 on my desktop and as part of Post steps I am able to mount the DB but while I am setting Database settings getting the error "unable to Retrieve Database settings" in MDM7.1.
    Can any one please suggest on the same
    Regards,
    Srinivas

    Hi Saini,
    Thank you for your reply, I have gone through that thread. I have done all the settings required for MDM and DB2.
    Only thing I havn't done is DB2 Client was not installed. Because our DB2 expert is saying that he has installed full DB2 installation and since DB2 and MDM are on the same box,
    client software is not necessery. Is this correct..please advice.
    Regards,
    Srinivas

Maybe you are looking for

  • My iPhone4 wont synch with itunes after upgrading to IOS5

    Hi I've updated to IOS5 on my iPhone but all my music and apps have been wiped, they are still on my itunes but when I try to synch my iPhone it says synching (steps 1,2,3) but nothing happens! Can anyone help please?

  • Revenue recognition at the time of Delivery - COPA

    Dear Gurus, Our sales cycles are bit different than the standard sales process. In one of the sales cycle the business does the Billing first and delivery later and the revenue recognition should happen at the time of delivery not billing. How do I a

  • Shortdump while cancelling downpayment billing "FAZ"

    Can anyone advise what's the root cause of the shortdump when cancelling a downpayment request in VF11?  The error message is : "The OPEN_DI of BTE 00001170 could not determine any function modules" Thanks Peter

  • Error in ADF-BC Database view instead of insert trigger

    I received the following errors when trying to insert. Any help or hint will be greatly appreciated. JBO-26041: Failed to post data to database during "Insert": SQL Statement "BEGIN INSERT INTO DEV_EQMT_HISTORY_BY_CODE(ID,D_E_ID,STATUS_KEY) VALUES (?

  • Backup few partitions from a database and restore them on different server

    I have a Database called Datamart. Datamart database has multiple partitioned tables and the database has different filegroups and partitions. I would split the database on to three servers with one-third of the database on each. If the database has