MapInfo MapX How to center the map with Geoset ?

Hello,
In CR2008, I create a report and I insert a map inside.
The map is well found (.gst file), but the map is not visible because not centered.
The little window (map browser ?) shows the map but the selection area doesn't match the part of the map in the object map.
See [Map in CR object|http://egavelle.free.fr/cr_mapx.jpg]
Top = the map just after the insert command
Buttom = after I touch the selection area in the "map browser"
How to do to show the map centered ?
I have tried to change the metadata in the geoset file (Projection, Center, ...) but this has no effect on center the map ?
Thanks

Hello, Not sure about that map tool you are using but as a reference CR uses the top left corner is location 0,0 of all our report objects.
Hope that helps
Don

Similar Messages

How to schedle the mapping in OWB?

Can any please provide me link to see the steps to schedule the OWB mapping. My version is 11.1.0.7.0. The mapping is developed
by some one. Now i need to take responsibility on this. I need to know how to schedule the mapping.I want to run this every day mighnight.
In project explorer, I went into schedules. Then i created the schedule. After that, i am not sure, how to link the mapping on this scheduler.
any help is highly appreciated.
thanks.

Hi ,
Do you have metalink or my oracle support access ?
If yes then check Note 444877.1 for OWB mapping or process flow scheduling .
1. Verify the mapping or process flow completes successfully.
2. Navigate to the Schedules node in the Design Center Console and create a new Schedules module
called MY_SCHEDULES. For the location, select your TARGET_LOCATION, as the schedule will be deployed to the database.
3. Create a new schedule, TEST_SCH, with time greater than current database machine time (server where the job executes).
4. Associate your schedule with the mapping or process flow. Right click the mapping or process flow and select the option "Configure" and "set Referred Calendar" to TEST_SCH.
5. In the Control Center Manager, navigate to your TARGET_LOCATION and note the Scheduled Job TEST_SCH_JOB under the Scheduled Jobs node. Deploy the job with action "Create".
Using SQLPlus logged into the database as the TARGET user, verify the user has a job TEST_SCH_JOB, in state DISABLED:
select job_name, state from user_scheduler_jobs;
6. Use the Schedule tab on the Control Center Jobs panel in the Control Center Manager to schedule
the job. Highlight, right click the job and from the pop-up menu select "start". Use the same query to check the current status:
select job_name, state from user_scheduler_jobs;
The above query will show whether the scheduled job is SCHEDULED, RUNNING or SUCCEEDED.
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10935/scheduling_etl.htm#CHDGEGJF
Thanks,
Sutirtha

A friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as yahoo address is no longer valid. Erasing the phone doesn't solve the issue. How to register the phone with Apple?

A computer illiterate friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as his yahoo address is no longer valid. Erasing the phone doesn't solve the issue as the Apple server identifies the hardware as registered. How to register the phone with Apple?
I helped him create a new email address and new iCloud account on my Mac but when we try to register the phone with Apple it says: Maximim accounts limit reached for this device. How can he register the phone? I read different threads and found out that only Apple care can do that. We're in Romania and don't know where to call. Any suggestions on how we fix this?

When I checked the support site for Romania, you apparently don't have an Apple Care contact center. You "may" try calling the US Apple care number to verify the account and have the password reset sent to a different email address. 800-694-7466

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to create a Mapping with Input Parameter?

Hi,
I have a target table where the primary key column should be loaded with an Input parameter value. How can we implement this? Let me know if any examples are available?
Regards
Kishan

Use a map input operator in your mapping. In the outgroup add an attribute, mapp the attribute with the column and then you can start the mapping with an extra input parameter.
Bye
Detlef

How AAE call the mapping program?

Hi Experts,
i almost have no experience on using AAE. after reading some documents i still have the below questions,
1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
3. in some documents "persistence" is discussed, can someone help me into more details?
thanks in advance. hope these could be explained.

> 1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
When you implement AAE,Adapter engine will execute your mapping program,that means AE has the capailities , they have copied moved routing ,mapping features in AE,so no need to interact with IE.
> 2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
There is no side effects at all,but there are some limitations like in PI7.1 monitoring not possible,ABAP PRoxy,look ups will not supported and only supports AE adapters communication.
PI7.1 EHP1 some enhacements happend on the same
search in sdn.
> 3. in some documents "persistence" is discussed, can someone help me into more details?
can you explain bit more..
Regards,
Raj

How to see the mapping functions assigned...

Consider someone has done the mapping with some userdefined functions and some node functions,etc...
now...i want to see the mapping used...i mean what is the userdefined function used ..or what is the node function used.....how to check that....I even cheked the depencies option..but it shows only arrowmark to the target field...
Can someone help me in that.....

Hi, First of all, you should get the name of function used in Message Mapping.
If the function name is among the standard function (you can check all the catagory of the standard function by choose value from drop down list of bottom of the data flow editor)
then your function used is standard function, eg. node funtions include "exist" "RemoveContext" etc...
Otherwise the function used must be user define function, from the same drop down list I mentioned above, you can choose "User Defined Function", then you will see the user defined functions used by current message mapping.
Hope this clear your doubt.
Liang

How to connect google maps with oracle

Hello people ,
i read an artical there is a way to connect google maps with oracle .
can anyone give us lesson or more information to do that ?
regards .

I guess, using Google for the same should be the best way to find the solution for it,
http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=How+to+connect+google+maps+with+oracle
HTH
Aman....

How to do the lsmw with bapi?

hi
while upload the vendor master data using (xk01) from nonsap to sap
how to do the lsmw with bapi? pls could u give the steps with scren shot to me.
regards
eswar.

Hi
BAPI - BAPIs (Business Application Programming Interfaces) are the standard SAP interfaces. They play an important role in the technical integration and in the exchange of business data between SAP components, and between SAP and non-SAP components. BAPIs enable you to integrate these components and are therefore an important part of developing integration scenarios where multiple components are connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the technical level. This provides for greater stability of the linkage and independence from the underlying communication technology.
LSMW- No ABAP effort are required for the SAP data migration. However, effort are required to map the data into the structure according to the pre-determined format as specified by the pre-written ABAP upload program of the LSMW.
The Legacy System Migration Workbench (LSMW) is a tool recommended by SAP that you can use to transfer data once only or periodically from legacy systems into an R/3 System.
More and more medium-sized firms are implementing SAP solutions, and many of them have their legacy data in desktop programs. In this case, the data is exported in a format that can be read by PC spreadsheet systems. As a result, the data transfer is mere child's play: Simply enter the field names in the first line of the table, and the LSM Workbench's import routine automatically generates the input file for your conversion program.
The LSM Workbench lets you check the data for migration against the current settings of your customizing. The check is performed after the data migration, but before the update in your database.
So although it was designed for uploading of legacy data it is not restricted to this use.
We use it for mass changes, i.e. uploading new/replacement data and it is great, but there are limits on its functionality, depending on the complexity of the transaction you are trying to replicate.
The SAP transaction code is 'LSMW' for SAP version 4.6x.
Check your procedure using this Links.
BAPI with LSMW
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI
For document on using BAPI with LSMW, I suggest you to visit:
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
<b>Reward points for useful Answers</b>
Regards
Anji

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How to use the namespace with a parser?

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

How to center the text displayed in a JList

Hi,
The width of the JList display area is wider than the text displayed. I tried to center the text displayed to make it look nicer. I had tried using "setAlignmentX(Component.CENTER_ALIGNMENT)" in my own ListCellRenderer class but did not work. Any idea how to center the text?
Fai.

Yes, I am using JLabels in my renderer and the following is the code:
public class MyCellRenderer extends JLabel implements ListCellRenderer {
     private static final Color HIGHLIGHT_COLOR = new Color(0, 0, 128);
     public MyCellRenderer() {
          setOpaque(true);
          setIconTextGap(12);
     public Component getListCellRendererComponent(
          JList list,
          Object value,
          int index,
          boolean isSelected,
          boolean cellHasFocus)
          String entry = (String)value;
          setText(entry);
          setFont(new Font("Ariel", Font.BOLD, 18));
          setAlignmentX(Component.CENTER_ALIGNMENT);
          if(isSelected) {
               setBackground(HIGHLIGHT_COLOR);
               setForeground(Color.white);
          } else {
               setBackground(Color.white);
               setForeground(Color.black);
          return this;
Can you point out where to implement the centering logic?
Thanks,
Fai.

How to download the application with my apple ID

how to download the application with my apple ID

What have you tried or are you asking how to do it from scratch?
https://itunes.apple.com/us/app/apple-store/id375380948?mt=8

MapInfo MapX How to center the map with Geoset ?

Similar Messages

Maybe you are looking for