MapiSendMail doesn't work after Exporting a report in CR2008 (Outlook2003)

Hi,
This one sounds crazy but I'm hoping this might make sense to someone..
We're using CR2008 SP4. In our WinForms app, we use the MapiSendMail function to open up a new email message for the user to send.
This issue only occurs when Outlook 2003 is installed (outlook 2007 and 2010 work fine).
If, in my application, I call MapiSendMail to send an email before exporting a Crystal Report to PDF .i.e oReport:Export() then both the export and sending mail work fine as long as I'm logged into my app.
If, however, in my application, I export a Crystal Report to PDF .i.e oReport:Export() and then I try to call MapiSendMail I get a generic MAPI erorr(2). I have to log out of my app to be able to open up a new mail message.
Is there anything in the Report:Export method that some affects default MAPI behavior?
Thanks,
Fergus

Hi Don,
Many thanks for getting back to me. I've found a workaround without having fully understood the cause. I'll put it all down here in case some others have similar problems.
I was already closing and disposing the report object in my code as soon as the export completed.
The Mapi error 2 is MAPI_E_FAILURE which translates to "One or more unspecified errors occurred while sending the message. It is not known if the message was sent."
I could not find any any "Access Denied"s using ProcMon.
I used the Modules.exe to determine which dlls were loaded when the MapiSendMail worked correctly and compared that to when it didn't work. One dll that poped out was "outex.dll".
I searched for that in ProcMon and (in the case where MapiSendMail didn't work) and found that it was looking for this outex.dll but couldn't find it. It's located in C:\Program Files\Common Files\System\MSMAPI\1033 but it never looked there.
So:
Calling MapiSendMail before exporting a report - outex.dll can be found
Calling MapiSendMail after exporting a report - outex.dll can't be found
To get around this I added C:\Program Files\Common Files\System\MSMAPI\1033 to the path on the machine(s) in question and it worked every time.
Thanks again for your help.
Fergus
p.s. After finding this workaround I found an almost identical problem but with Oracle instead of Crystal (How to serach text via TREX with cryptograph attachment in SAP system?).

Similar Messages

URL button doesn't work after export into ppt/word/pdf

Hi,
I am working in Xcelsius.
Lets say I have placed a URL button in the Canvas and mapped that to a path of the file(which is not actualy an URL),but any path of the file which is present in the local system
After exporting this dashboard into ppt(or word/pdf),when i click the button,its not redirecting me to a target.
But during Preview of dashboard,it works fine.But after exporting,the URL button not redirects me to the path specified.
Rgds,
Murali

Hi
U got any solution for the above problem?
Thanks
Kothai

M3800 Developer Edition: wifi doesn't work after sleep

I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
Relevant ouput:
lsmod when problem exists:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list when problem exists:
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
3: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
May 4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
May 4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
May 4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211: DFS Master region: unset
May 4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
May 4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
May 4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
May 4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
May 4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
May 4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
May 4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
May 4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
May 4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
May 4 08:23:16 jonathan-m3800 ModemManager[852]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
lspci:
06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
After reboot:
lsmod |grep -i iwl:
iwlmvm                217725 0
mac80211              652718 1 iwlmvm
iwlwifi               179412 1 iwlmvm
cfg80211              494362 3 iwlwifi,mac80211,iwlmvm
rfkill list after reboot:
0: nfc0: NFC
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
2: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no

Wi-Fi still not reconnecting after sleep
http://forums.macrumors.com/showthread.php?t=1229591

App store doesn't work after iOS6

App Store doesn't work after ios6. Re-booting doesn't work. Suggestions please.

I have the same problem with my New iPad.
It was fine until this afternoon when I upgraded to ios6.
I don't have the wifi issues that others have reported but my AppStore doesn't work anymore.
It's just the AppStore that won't work.
Though Purchased and Updates looks OK, "Featured," "Charts" and search all return no results - just a big gray screen in the middle. I've been walked thru a Restore by Support but nothing's worked so far. I've tried logging off and logging back on.
From what I can tell, everything else (iTunes, apps, etc) look ok.
Any other suggestions?

IMac - Display doesn´t work after restart

My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
If I turn it off and wait 3 or 4 hours and then turn it back on the display works OK.
This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

Touch ID doesn't work after ios 7.1.1 update

Touch id doesn't work after ios 7.1.1 update..
Why????

After IOS update, you first have to use passcode.
Passcode is needed when
After restarting your iPhone 5s
When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
To enter the Touch ID & Passcode setting

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Keynote hyperlinks don't work after exporting to html

I'm working with Keynote in iWorks '08 on an iMac running OS 10.5.2. My hyperlinks (graphic and text) work perfectly running Keynote as a slide presentation, but not when I export it to an html format. What am I doing wrong here?
Thanks for any help you can provide.
Jeff
PS: The hyperlinks do work after exporting in flash or pdf format, but our webmaster says I can't use those formats due to compliance issues.

I noticed this as well. What I realized is that Keynote seems to just export the slide as a .jpg with a an .html file referencing the .jpg image. So in essence it is not creating an .html file of the slides contents but rather a reference to a picture of the slide. I haven't tried but maybe "send to" iweb and then "publishing to folder" will give you what you need. Not sure.

Condition doesn't work after transport to QAS system.

Hi all:
the condition doesn't work after the workflow transported to QAS system. the workflow designed has a constraint that only the creation of the document of Type M4 can trigger the workflow, but creation of Type M5 document can also trigger the workflow, could you please tell me the possible reason?
Thank you very much

Hi,
Once Try checking as pavan suggested whether the Customizing requested is transported.
To Maintain Workflow start conditions you can also maintain through SWB_COND and ensure its transported.
Regards
Narin

Sirius Internet Radio doesn't work after Snow Leopard

Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
[email protected]

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

MapiSendMail doesn't work after Exporting a report in CR2008 (Outlook2003)

Similar Messages

Maybe you are looking for