@MappedSuperclass and relations

In order to minimize work, I generate by Javaclass from the DB. But to allow custom code to be present, I make another class persistent. For example article:
@Entity
@Table(name="article")
public class Article extends nl.reinders.bm.generated.Article
... <custom code here>
@MappedSuperclass
package nl.reinders.bm.generated;
public class Address
... <generated from db code (=properties) here>
When there is a ManyToOne relationship between two classes, I generate both sides using @ManyToOne @JoinColumn(name=...) and @OneToMany(mappedBy...).
The ManyToOne works, but the OneToMany not. If the code is this:
public java.util.Collection<nl.reinders.bm.Sellorderline> iSellorderlinesWhereIAmArticle;
The following error occurs:
The attribute [iSellorderlinesWhereIAmArticle] in entity class [class nl.reinders.bm.Article] has a mappedBy value of [iArticlenr] which does not exist in its owning entity class [class nl.reinders.bm.Sellorderline]. If the owning entity class is a @MappedSuperclass, this is invalid, and your attribute should reference the correct subclass.
nl.reinders.bm.Sellorderline is not a MappedSuperclass, but does not contain the iArticlenr. However referring to nl.reinders.bm.generated.Sellorderline gives the following error:
Exception Description: [class nl.reinders.bm.Article] uses a non-entity [class nl.reinders.bm.generated.Sellorderline] as target entity in the relationship attribute [public java.util.Collection nl.reinders.bm.generated.Article.iSellorderlinesWhereIAmArticle].
What is going on?

Ah, nevermind, it turned out that I stripped the "nr" postfix from the property name. Problem solved.

Similar Messages

  • TS5376 For about 4 months now I have been getting an Apple I-Tunes update message but when I try to install it, the program stops and refuses to install it saying I need to go to tools and manually install. the support page says:1. Remove iTunes and relat

    Dear Windows support personel,
         As part of my message reads above; I keep getting an i-tunes update message and when I click on the OK to download it, I get an error message saying there was a problem and I need to go to Tools>manual download.  Well, I don't know how to do that even though I gave it my best try. I went to the support sight and it had the following message;
    1. Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or  only uninstalling some of these components, may have unintended affects.
    If you encounter an error while uninstalling, try repairing the affected component:
    I don't know if I should do that since I'm not PC savey. Could you help me by doing the work on my pc for me? I'd be most apprieciative if you'd help me in this manner.
    Sincerely,
    Christine Bocker
    <Email Edited by Host>

    Let's first try updating using an installer file downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file  on the  left side

    Is it possible to get the style, font and related info of a paragraph text  of a in design file and write  all the stuff on the same in design file  on the  left side with small fonts 
    as
    Lets  this is a text in in design file    :
    style : abc                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu
    style : xyz                      we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultur we are going to check the  condition  Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the  condition  Agence Wallonne pour la Promotion d'une Agricultu

    Hi Poojith
    Not sure if this would solve your requirment but just in case might be helpful:
    1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
    [http://www.sapdesignguild.org/resources/htmlb_guidance/]
    2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
    Thanks
    Deepak

  • How to show statistics of main item and related items with less filter?

    Hi experts,
    Have any of you come thro' similar requirements before?
    To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
    You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
    However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
    Any one of you have better idea?
    Thanks and Regards,
    Cherry

    You Should use Formatted Search in this case.
    You must create and associate a query for your field.
    click on the field you want items to be listed and press Shift + F2
    catch the keydown event of this field  and check pval.charpressed = 9 (tab key press)
    then execute
    SBO_Application.SendKeys("+")

  • Services in SAP management console and related window services and process

    hai
    can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
    thanks in advance.
    Naga Laxmi

    Hi Naga,
    Please refer to this article for the processes relevant to the Java Instance:
    http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
    Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
    You can easily find the relevant services by their SAP prefix.
    Hope this helps.
    Best Regards
    Vyara

  • My downloads of iTunes and related software onto my Windows PC fails every time with error message that the software does not have valid signature.  How to get around this problem?

    I have trouble downloading iTunes software and related software like the new ios8 on both my desktop--Windows 7, and my laptop--Windows Vista, because I keep getting error messages saying the software has been deleted because invalid signature.   I have tried download and install and I have tried just download, but neither method works.   So I am stuck with the older software and my new iPad 2 Air isn't connecting because I need ios8 apparently.
    I have an iPhone 5 and a new iPad 2 Air.
    How to get around the Windows problem, please?
    Thank you!

    bump

  • A simple question about Drag and Relate navigation

    Dear experts
    I have found SAP help or related manuals only good at talking difficult things such as how to customise the drag and relate targets, etc.  However, after I followed exactly and then how to test.
    Then I just see pieces of information, very unstructured.  Spending me a whole day, even I can't get a good simple example on how to really perform a drag and relate at least for the proof of concept at EP 6.0.   It spent a lot of time in describing what the navgiation panels about, what drag and relate targets.  Then how to do it in once transversal.  That is, with all customisation, how to drag and relate an object.
    My step is with iview A, shows a purchase order details showing a drag and relate enabled object like vendor no.
    Then I try to drag this vendor no. to a display vendor iview, iview B.
    I have known I have to put iview A and iview B to a Drag-and-relate targets.  I am sure I have done this.  Does it mean opening the portal, I will see both iview A and iview B appearing at the same time in the drag-and-relate target area?  However, in my case, it is not, iview A only appears in that area when I load it once, same to view B.  When I load iview B, iview A links from D&R target will be wiped off.  Then how I can drag an item from iview A to B while each one of them can only appear at any time.
    Can anyone give me a simple guide (don't give me an internet link from help.com) I have been tired of this.
    First, I would to make sure if my so called self-learnt drag-and-relate simple action is correct in the steps or really I have made something wrong in the customisation or even a bug there.
    Can anyone on the planet have this experience, pls. act as my teacher in this area?
    Rgds
    Stephen

    Thanks
    I have tried the 1st way already.  But I can see both iviews existing in the D & R targets.  Now I try to drag an item with business object BUS2002 from iview A to relate to LFA1 of iview B of the same back end system.
    But iview B shown up with that data of LFA1 shown up (in my case the vendor no.)
    I have used autocomplete relationship and I have checked it has been well-defined already.  Also check from metadata at backend they are both active.
    Do you have any clues to the pitfall in my case?
    Rgds

  • Report to List Incoming Payments and related Invoices

    Hi Experts,
    I would like a query which lists Incoming Payments and also the related Invoices which were paid.
    Is there a table which links together the ORCT and OINV tables?
    Thanks
    Greig

    Hi Greig,
    Link to ORCT - OINV( SELECT * FROM ORCT T0  INNER JOIN OINV T1 ON T0.DocEntry = T1.ReceiptNum )
    Link to ORCT -RCT1 - OINV( SELECT * FROM ORCT T0  INNER JOIN RCT1 T1 ON T0.DocNum = T1.DocNum
    NNER JOIN OINV T2 ON T0.DocEntry = T2.ReceiptNum)
    Try this,
    Lists of Incoming Payments and related Invoices.
    SELECT T0.DocNum,
    COUNT(T0.DocEntry) 'No of Invoice'
    FROM RCT2 T0
    INNER JOIN OINV T1 ON T0.DocEntry = T1.DocEntry
    GROUP BY T0.DocNum
    Regards,
    Madhan.
    Edited by: Madhan Babu C on Aug 28, 2009 9:23 AM

  • How to import custom report to drag and relate menu ?

    Hi Professionals .
    Kindly advice me how to add or import custom report at drag & relate menu
    Any help please ?

    Hi Mohamed,
    Please check below link.
    What is Drag and Relate in SAP Business One - YouTube
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/100314cf465d7ae10000000a11466f/content.htm
    https://help.sap.com/saphelp_sbo882/helpdata/en/45/10ff71cf465d7be10000000a11466f/content.htm
    SAP - SAP Business One: Your Solution for Generating Custom Reports
    Hope this helps
    Regards::::
    Atul Chakraborty

  • An anyone help me to find the difference and relation between the following

    Hi,
    can anyone help me to find the difference and relation between the following methods of Swing :
    a) validate()
    b) invalidate()
    c) revalidate()
    d) repaint()

    You'd be far ahead by opening up the API and Java turorial and your course book and learning for yourself, rather than, asking other to do your homework for you.
    But if you have andwers already to go, then post them and ask if you have drawn appropriate conclusions.

  • Engineer between Logical Model and Relational Model

    I am trying to update changes from one model to the other but there are dublicate entries generated instead of updates.
    The Logical Model was imported from Oracle Designer, the Relational Model was imported from data dictionary.
    Our rule is, that the name of Entities/Tables and Attribute/Columns are identical.
    So I changed the Naming Standard of the Logical Model in Preferences
    from Separator = Space to Separator = Character with char = Underline.
    If the entity is not existing, it is created with the correct name.
    If the entity exists, a new entity is created with Namev1.
    The same happens when I try to update changes in the other direction.
    How can I achieve that the existing entity (or table) is updated and not a new one is created?
    Or in other words, is there a way to link entities to corresponding tables?
    Walter

    Hi Walter,
    The Logical Model was imported from Oracle Designer, the Relational Model was imported from data dictionaryit's good to import entities and related tables from Designer repository together. Data Modeler will import the link between them and use that link in synchronization between logical and relational model. After that you can import details for physical model from database.
    If you don't have tables in Designer repository and keep the same names for entities, attributes, tables and columns then you can engineer logical model to relational and import details from database.
    Philip

  • DM3.0 EA2: Filter engineering changes between logical and relational model

    Hi,
    when I am engineering changes between logial and relational model there are some issues at filter handling for me:
    - When the filter "Show Modified Objects" is activated, the filter works only on the first level, e.g. on Entity level. On attribute level all attributes are displayed, not only the attributes which have really been modified. It is possible, to show on every level only the really modified objects?
    - I think, selecting a Filter condition is circuitous. All filter conditions except "Show All Objects" keeps activated when I choose another condition. So I have to deactivate "Show Deleted Objects" when I want to see only the modified objects. It is possible to choose another control element for filtering, e.g. disjunctive radio buttons?
    I am running Data Modeler on Windows XP with german localization and the JDK 1.6.0_11 from Oracle SQL Developer.

    I logged bug for that.
    Philip

  • Link between Komv structure and related table

    hai,
    I have one problem in CIN.
    In Purchase Order for
    ED - JM01 or JEXC
    CESS -ZECS or JEC1
    CSTLST - JIP1 or JIP2
    stored in KOMV Structure,
    other than KOMV  TABLE where this values are stored..
    (In KONV no values found for that one)
    pLEASE, tell me Table name .....in which i get above condition value
    thank you
    Manoj..

    Hi,
    1)GOTO>SE11>Open the table.
    2)Just beside the CONTENTS & DISPLAY BUTTON-->Click on Graphics Button
    3)New Graphics window ill popup.
    4)check for the forign key and check table button.
    you will find all the related tables,and Relations.
    This will be very helpful for future reference also.
    Hope it resolves the query.
    Regards,
    Gurpreet

  • Add new Item to Drag and Relate Menu

    Hi Dear;
    1- how can i add a new item to drag and relate menu?
    2- how can i link it to an sql statement?
    exp: user table (OUSR)
    best regards;

    Dany,
    Currently that functionality is not available using the SDK.  Apologies.
    Eddy

  • How can I delete the existing objects and Relation ships in OM?

    Hi One and All,
    Hope all of you doin well,
    I want to delete the all existing objects in OM, like Org units, positions, jobs and etc... and also relationships.
    Please guide me.
    Thanks,
    Potru.

    all Objects are stored in table HRP1000 and relations in HRP1001, related to HRP1001 there are HRPADxx tables depending on the relationship.
    You will have to write your own program.
    If you have Clone&Test you could use /BKC/SOL21_PDPDEL to delete complete (sub-)structures.

Maybe you are looking for