Mapping ACLs between Solaris10 ZFS server and Solaris 9 client ??

The NFS server is Solaris 10 with a ZFS filesystem. The client is Solaris 9. Using NFSv3 over tcp. If we go to the Sol10 box and set a simple ACL on a directory we never see any indication that an ACL is set from the Sol9 client. The "ls -l" will not show a "+" for the directory. The ACL permissions actually work from the client side, however. What we need is some method for the Sol9 users to actually see that there is an ACL set. Getfacl does not work.
Testing this arrangement with a Fedora 8 client still using NFSv3, the ls -l will show the "+" character.
thanks for your help,
Don M.

Similar Messages

Connection between oracle 9i server and oracle 9i client

hi there,
i have installed both oracle 9i server and oracle 9i client in my system.how can i connect these two to have connection between these server and client?
Because i was using only 9i server for creating database and for other purposes.i have not used 9i client yet.
Please write me the answer.
Thanks in advance.

Hi Balu,
If you have the Oracle 9i Client, you can just edit your TNSNAMES.ora file of your client to have a TNS Entry for your new Database & try connecting it. You just need to try TNSPING & ensure that you can reach the Listener.
Are you facing any specific problems ?
Regards,
Sandeep

Jndi compatibity between wls6.1 server and wls9.1 client

Hi
I have some code running as session ejbs on wls6.1.
The client was on wls8.1 and was working fine. I am trying to upgrade to 9.1 and get the following message:
javax.naming.CommunicationException [Root exception is weblogic.socket.Unrecover
ableConnectException: [Login failed: 'Incompatible version: Incompatible version
s - this server:6.1.4.0 client:9.1.0.0]]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:48)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:739)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:343)
at weblogic.jndi.Environment.getContext(Environment.java:263)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:6
67)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
DOes this mean there is compatibity problem between jndi on 6.1 server and client on 9.1 ?
Let me know if there us a solution other han migrate the older one to 9. 1 !!!
Thanks
-Nav

I believe the compatability guarantee is self - 2 releases. So 9.1 will talk to 8.x and 7.x but not 6.x.
That being said, I'd suggest confirming this with [email protected]
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

Differences between CTI OS Server and CTI Server ?

Hello community,
I've been working with CTI Desktop for a while but I'm not clear about the differences between CTI OS Server and CTI Server?
If you go to http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_8.5(x) and read note 10, they make diffrences between both products.
Thanks in advance,
Alejandro

CTI Server was the original CTI interface into ICM. It uses a network communication protocol, GED-188 I believe, for communication between the client and server. This is relatively difficult to program against. CTIOS and it's related SDKs were developed to provide an easier method of developing desktops and integrating desktop applications. CTI Server communicates with ICM, CTIOS Server communicates with CTI Server, and desktop applications using the various SDKs communicate with CTIOS Server. Cisco may be looking to get away from CTIOS Server in the future because of their decision to integrate Finesse with CTI Server rather than CTIOS Server. Hope that helps.

What is diff between oracle application server and weblogic server?

what is the exact difference between oracle application server and weblogic application server?

The difference between Oracle Application Server AND WebLogic Server has been discussed in a lot of forums dated 2008 and earlier comparing OAS10g with WebLogic10.0/WebLogic9.2
But, now since Oracle has taken over WebLogic, this is not really important.
Now, OAS has no further releases post 10g. WebLogic Server will be the Oracle's strategic application server going forward.
So, if your query is for choosing one of them for a new environment, you are better of with WebLogic Server 10.3.6 OR WebLogic Server 12g
As we will not have further releases of OAS and also OAS10g will be end of life soon, we recommend Oracle WebLogic Server.
If you still want to know the differences, here is one such old oracle documentation link that talks about it
http://docs.oracle.com/cd/B10467_16/migrate.904/b10425/asmwl02.htm
Arun

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Connection between BO Mobile Server and BOE

Hi All,
I have installed BO Mobile on the same machine which as Business Objects Enterprise.
Have the following questions
1. How the mobile server connect to the enterprise server? Let me know what are the steps needs to be done for the connection between the mobile server and enterprise.
2. How the connection between mobile server and proxy server
I gone through the installation and deployment guide of businessobjects mobile but it not clearer to me.
Kindly, help me out.
Thanks and Regards,
Yuvaraj.

Hello,
I have a similar scenario to that you have described, in order to test;
BOE and BO Mobi deployed on the same machine, no proxy. I am also using a BB simulator in order to test connecting.
I have installed the client s/w to the simulator device, but am unable to connect to BOE from the device.
Below is the info from each of the config files and device.
Can you tell me if there is a needed change?
1. VMS
$Id: server.config 28982 2008-01-03 21:52:21Z hmak $
config for VMS Server instance
VERSION = 6.0
[server]
SERVER_ID=VMS_SERVER
[comm]
BINDTO_PORT=11711
MANAGEMENT_PORT=11712
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all VMS servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
2. VAS:
$Id: server.config 27498 2007-10-01 19:12:19Z hmak $
config for Authentication Server (VAS) instance
VERSION = 6.0
[server]
SERVER_ID=AUTH_SERVER
[comm]
BINDTO_PORT = 11011
MANAGEMENT_PORT = 11012
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all auth servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
3. Handheld Connection Settings:
Mobile Server: <server IP Address>
Port Number: 11011
CMS Name: <BOE machine Name>
Auth Method: Enterprise

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

Now that I have the Media server and 3 media client boxes, all

Now that I have the Media server and 3 media client boxes, all the individual lists of schedules are gone.
Is there any way to keep the seperate lists on the client boxes?
Solved!
Go to Solution.

No because the VMS is where are all the recordings are done.
Client boxes use the tuners of the VMS.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Linux install server and solaris 10

Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.conf
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *
In /home/sunos, I have:
[root@robert sunos]# tree -L 2
|-- Solaris_10
| `-- Tools
|-- boot
| |-- hsfs.bootblock
| `-- sparc.miniroot
`-- lost+found
In /home/sunos_install, I have:
[root@robert sunos_install]# tree -L 2
|-- Solaris_10
| `-- Product
|-- jumpstart
| |-- jumpstart.conf
| `-- sysidcfg
`-- lost+found
[root@robert jumpstart]# cat jumpstart.conf
install_type initial_install
system_type server
partitioning explicit
filesys any 2000 /
filesys any 1500 swap
filesys any 1500 /var
filesys any 2000 /opt
geo N_America
cluster SUNWCreq
package SUNWgzip add
package SUNWless add
package SUNWman add
package SUNWbash add
package SUNWtcsh add
package SUNWzsh add
[root@robert jumpstart]# cat sysidcfg
system_locale=en_US
timezone=US/Pacific
terminal=xterms
name_service=NONE
timeserver=pool.ntp.org
security_policy=NONE
root_password=xxxx
network_interface=primary
{ hostname=js-test
ip_address=192.168.2.20
netmask=255.255.255.0
protocol_ipv6=yes}
Putty log file from console:
root server: 192.168.2.10 (192.168.2.10)
root directory: /home/sunos/Solaris_10/Tools/Boot
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10a096d] data at 0x1800000
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10a0970, 0x12615bf] data at 0x1867cc0
module /platform/sun4u/kernel/misc/sparcv9/platmod: text at [0x12615c0, 0x12615c7] data at 0x18bdf80
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at [0x1261600, 0x126da07] data at 0x18be680
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\|/Ethernet address = 8:0:20:c2:1b:b4
-Using default device instance data
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/mem = 1048576K (0x40000000)
avail mem = 846602240
root nexus = Netra t1 (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
ramdisk0 at root
ramdisk0 is /ramdisk-root
root on /ramdisk-root:a fstype ufs
pseudo-device: dld0
dld0 is /pseudo/dld@0
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme0 : Local Ethernet address = 8:0:20:c2:1b:b4
PCI-device: network@1,1, hme0
hme0 is /pci@1f,0/pci@1,1/network@1,1
SUNW,hme1 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme1 : Local Ethernet address = 8:0:20:c2:1b:b5
PCI-device: network@3,1, hme1
hme1 is /pci@1f,0/pci@1,1/network@3,1
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,0/pci@1,1/ebus@1
su0 at ebus0: offset 14,3803f8
su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
cpu0: UltraSPARC-IIi (portid 0 impl 0x12 ver 0x91 clock 440 MHz)
iscsi0 at root
iscsi0 is /iscsi
|pseudo-device: zfs0
zfs0 is /pseudo/zfs@0
Configuring devices.
/pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex@1
/pci@1f,0/pci@1,1/network@1,1 (hme0) online
/pci@1f,0/pci@1,1/scsi@2 (glm0):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@2, glm0
glm0 is /pci@1f,0/pci@1,1/scsi@2
PCI-device: pci@1, pci_pci0
pci_pci0 is /pci@1f,0/pci@1/pci@1
su1 at ebus0: offset 14,3602f8
su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3602f8
ecpp0 at ebus0: offset 14,340278
ecpp0 is /pci@1f,0/pci@1,1/ebus@1/ecpp@14,340278
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
sd0 at glm0: target 1 lun 0
sd0 is /pci@1f,0/pci@1,1/scsi@2/sd@1,0
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
pseudo-device: pool0
pool0 is /pseudo/pool@0
pseudo-device: mem_cache0
mem_cache0 is /pseudo/mem_cache@0
pseudo-device: fcode0
fcode0 is /pseudo/fcode@0
-\i2c0 at ebus0: offset 14,600000
i2c1 at ebus0: offset 14,100000
i2cadc0 at i2c0: reg=0x0:0x9E, name=bus,address="0,9e"
i2cadc0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/adc@0,9e
i2cgpio0 at i2c0: reg=0x0:0x70, name=bus,address="0,70"
i2cgpio0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,70
i2cgpio1 at i2c0: reg=0x0:0x72, name=bus,address="0,72"
i2cgpio1 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,72
|/-\|/-\|/-Using RPC Bootparams for network configuration information.
Attempting to configure interface hme1...
\|/-\|/-WARNING: hme1: fault detected in device; service degraded
WARNING: hme1: No response from Ethernet network : Link down -- cable problem?
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Skipped interface hme1
Attempting to configure interface hme0...
Configured interface hme0
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found

rmcnaught48 wrote:
Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).You can install using the keyboard with jumpstart. Without jumpstart you'd need local media (you can't enter the OS via the keyboard).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not foundHmm. That looks like the image file is corrupt. Can you pull the image from media again? Can you see if there's a /sbin/install-discovery file in the image (usually under Tools/Boot/root). I recall there used to be a problem with that file.
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.confIf you just want an interactive install (prompt for configuration/settings), you don't need sysid_config or install_config. Those are for automated installations.
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *That looks pretty good.
You do have the option of running VMware on linux, and putting a Solaris 10 image on it, then using that VM as your boot server. But the problem you're displaying doesn't appear to be related to the linux server.
Darren

Double-byte Chinese characters between Flash Media Server and WebLogic 9.2

i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>x8054x901Ax6027x6D4Bx8BD5</test>
</reports>
</response>
</root>
the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
<test>测试联通性</test>
Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>测试联通性</test>
</reports>
</response>
</root>
then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

i have installed a FMS (Flash Media Server 4.0 developer edition) and a weblogic server on linux. The two servers communicate with each other via WebService (Axis2 on Weblogic 9.2). i can send some XML message from FMS to the Weblogic server and receive message. but the returned message from the Weblogic server is as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>x8054x901Ax6027x6D4Bx8BD5</test>
</reports>
</response>
</root>
the returned messages between the <test> and </test> tag can be decoded to "测试联通性" in Chinese via utf-8. why not the returned messages just show the result as :
<test>测试联通性</test>
Later i made another test: copy the war file in weblogic server to a apache-tomcat server, then the FMS send XML message to apache-tomcat and got the correct message as follows:
<?xml version="1.0" encoding="utf-8"?>
<root>
<response>
<result>1</result>
<reports >
<test>测试联通性</test>
</reports>
</response>
</root>
then what is the problem with my weblogic? what shall i do to solve the problem? thank you for anyone who gives me some advice.

What attributes are shared between a Radius Server and a WLC?

I have a customer who is trying to setup a Radius server to authenticate Management users for the controller,
she is using a Microsoft NPS R2 server. All good at this point.
She needs to know what attributes are shared between the server and the WLC to complete the authentication
because she is being successfully authenticated, but still unable to access the WLC.
Someone knows what those attributes are?
The only information at the moment that I found, was on a document that said that different management
users can receive different Vendor-specific Attributes. That means that the returned attributes to the WLC
will depend of what radius server model or platform you are using.

Robin,
For using Microsoft radius to authenticate management users, you can reference this document, which shows you the steps involved.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/91392-airespace-vsa-msias-config.html
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Mapping ACLs between Solaris10 ZFS server and Solaris 9 client ??

Similar Messages

Maybe you are looking for