Mapping an Argument Set to End Event

Hi,
I presently have a requirement where we trigger different operations based on the input arguments. We created different argument sets for each of our requirements and exposed all those argument sets as operations on the BPM WSDL using Process Execution option.
However, we couldn't map our responses for each of our operations in a similar manner. We would like to know if there is an equivalent to creating argument sets in the end event too for mapping our responses.
Any help in this regard is appreciated.
Regards,
Rudraksh

Hi,
It seems that SM is not able to execute a workflow that related to ServiceRequest
try to run the following command to find out the workflow name:
get-scsmworkflow -id <WorkflowID>
If the workflow does not exist in the SM console or if you would like to force deleting it then run:
get-scsmworkflow -id <WorkflowID> | remove-scsmworkflow
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Role mapping between Portal and Back end systems

I am new to SAP EP.
I just want to know how the mapping between portal and back end system happens.
Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.

Hi,
Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
Regards,
Samir

How to set fire action event for particular rows in a table

HI All,
I have a requirement in which I want to set fire action event for particular rows in a table based on some condition.
The table has columns like fullname,employee id etc.
So i want to set fire action event for particulars rows only which will saisfy some condition.

Atanu,
Your approach(setting fire action for few rows) seems not possible. Better to go ahead with workaround.
Do you want this functionality in processRequest(while page loading) or processFromRequest(on some event) method ? Give more explanation regd. your requirement ?
In either case loop through the rows and when your condition is met write the action to be performed in controller.
Regards,
Anand

How do I set repeating workday events in my calender? There is no option for custom.

How do I set repeating workday events in my calender? There is no option for custom.

The built in Calendar app has very limited repeat options. You might want to try an app like Week Cal which has a much more robust repeating event selection. As it pulls from the same calendar database as the built in, there's no reentering of information required.

When I try to create a calendar announcement in my iCloud calendar thru my PC / Outlook, it says 'the set of folders could not be opened. The information store could not be opened'. Can anyone help? This means I cannot set any calendar events thru my PC.

When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?

If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).

How do I set a recurring event for the last day of the month on iphone 4s calendar?

I want to set a recurring event for the last day of every month - regardless of the date/number of days in the month. I'd prefer not to have to use an app to do this.

Hi,
You can do this using the custom repeat in iCal. You'll need two events to cover the second and fourth Mondays.
Create the event on the second Monday of the month. In Repeat select Custom... > Frequency: Monthly > On the: second Monday.
Do the same for the Fourth Monday.
Best wishes
John M

Maps - how to set up more than one destination

In Mavericks 10.9.4, how do I use the system Maps application to set up more than one destination? I saw no way to add a 2nd destination to my route. I know I could set up several one-destination trips but that seems silly.

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Is there any way to set a calendar event in MS Outlook from Oracle Forms

I need to set and delete events in MS Outlook from an Oracle Form (version 10gR2).
Is there any way to accomplish this?
Thanks

You will need to use OLE on the client, which would further require the use of WebUtil. Here (below) are a couple of MS examples that you would need to convert to pl/sql. There are a variety of Oracle notes which discuss reading and writing to MS Word and Excel. These can likely be used as a starting place to talk to Outlook. There is a WebUtil demo which includes an example of how to write to MS Word. It can be found on the WebUtil home page:
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html
<li> http://support.microsoft.com/kb/160502
<li> http://support.microsoft.com/kb/170262

I want to set up an event that repeats every 3 days that is timezone independant. Is it possible?

I want to set up an event that repeats every 3 days that is timezone independant. Is it possible?

It is possible to have multiple libraries in a single account and use each one for a different iPod without affecting the other. To create or access a second (or more) library, hold down the Option key when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library but if you are only going to update your Dad's iPod periodically this shouldn't be an issue:
Using multiple iTunes libraries -Mac

How do I set up calendar events that will be for another time zone? My events shift once I travel

How do I set up calendar events that will be for another time zone? My events shift once I travel. The same is true when I am traveling and in another time zone, how do I best set up my events so they are in the correct time slot upon my return?

Basically, if your client does not have a Mac then don't use iWeb to create the site. iWeb is Mac only and if a client wishes to make alterations, then they need the domain file.
If your client needs to update on a weekly basis, then why not consider using one of the online website creation packages where you can log in from any Mac or PC. This would be simpler and there are lots out there - Microsoft Office Live or Google or something like http://www.wix.com where you can create a site and use a domain name with it.
Look at the alternatives before using iWeb.

How to set "All day event " as default in Calendar in 9630

In BB 9630 how do I set "All day event " as the default in Calendar?

Hello,
You asked the same question twice, albeit the first time in the wrong place:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8300/How-to-check-as-default-quot...
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi.. i've got problem with my iPhone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold power and home button even reset the network setting but ended with i am not able even to turn the wifi on. does any body can help me out???

hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?

See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple.

How do you set the End Action on last slide of slideshow

Encore DVD CS3.
I must be the village idiot. I have setup a slideshow with manual advance. I cannot find a way to set the end action for the last slide. When I click on the last slide in the slideshow timeline there is no option that I can find for end action. When I preview the slideshow the last slide goes to black. I set the manual advance for all slides. There is several mentions of end action but no info on how to do it.
Appreciate advice. Very frustrating.
Clif
BTW Why are there no reference books for Encore CS3? It seems very strange. It has been out for a while but NO books.

Thank you for your help. I did what you said but the last slide still goes to black. The last slide also ignores the "manual Advance" and goes to black.
I highlighted the slideshow timeline in the project window and set end action on the properties panel on the right to the slideshow itself. But the last slide quickly goes to black. Each slide except the last one has a box in the upper right corner indicating a cross dissolve transition. I set the slide duration to "manual advance" for the whole slideshow. I feel like an idiot but nothing seems to change the end action of the slideshow or the last slide. Always cuts to black and stops.
Clif

Event for task not defined as start/end event

Hi all,
We get the following error in our inbox although the event seems to work as intended
Event ZIMEC006 APPROVED_REJECTED for task TS81700130 not defined as start/end event
If I go to the task TS81700130, the event APPROVED_REJECTED is defined as a terminating event(under the tab terminating events) with objecttype BO and object ZIMEC006 and the binding is ok
What could be the problem?
Thanks for all help
Hans

Hi,
The BO your using is a custom one,
If Yes Goto the BO, Release that Event,Save and generate the BO.
other wise, if you created a Subtype of the Std. BO, check that Z-event you created is released and the BO delegated to Std. BO, save and generate the BO.
Then try now.
Regards,
Surjith

I live in Canada. Each time I travel to the US, I lose all calendar entries. I have to erase all data, then restore from an iCloud backup. Tedious. iPhone 4, iOS 7.1, sync set to all events. Any suggestions?

I live in Canada. Each time I travel to the US, I lose all calendar entries. I have to erase all data, then restore from an iCloud backup. Tedious. iPhone 4, iOS 7.1, sync set to all events. I only use the default calendar. Do I have an incorrect setting?

I did find another point worth mentioning.
I use my iPhone 4 with a corporate Exchange email account. I had deleted the account from my phone just before I did this backup/restore process...and I thought my battery drain was much, much better (if not outright fixed).
Later in the day, after seeing my battery life improve to near-new behavior, I re-added my Exchange mail account. Considering I have 1 yahoo account and 3 gmail accounts, the Exchange account adds a 5th email account.
What happened? Battery drain back to "worst case". Removing or re-adding the Exchange account is like toggling between decent and terrible drain conditions.
Bottom line is that I re-added a couple dozen applications and battery life didn't change. By far, the Exchange account drains the battery worse than any other app and setting. This account must be polling very frequently and since people tend to send very large file attachments to that account, perhaps those effect the battery drain even though I have the account set to not download attachments.
Anyone running Microsoft Exchange might be able to confirm what I see? If so I can open an enterprise ticket with Microsoft and bug them on this issue.

Mapping an Argument Set to End Event

Similar Messages

Maybe you are looking for