Mapping behave odd after re deployment

Hi,
We have a strange situation, we are using OWB 10.2.0.3 and database Oracle 10.2.0.3.0,
We have some mapping running past 1.5 years with out any issue as part of code migration we re deployed same code then we are getting strange errors like undefined identifier (some column name) , we use replace as a mode of deployment now i am getting some error on a mapping saying uniq constarint error but the data is fine any clues on these errors i see these when we redeploy the same code
undefined identifier (some column name) gone when i delete mapping form owb and import and deploy
Suresh

Hi Suresh,
There may be multiple problems in ur case.
1) the database might not be in sync.
2) the OWB migration may have messed up some objects (this is the most common issue)
3) OWB instillation may be different than before
4) the database may be set in a different way
5) OWB metadata may have been messed up.
6) tables in OWB and/or Database are not in sync.
Please make sure all the above are set correctly.
Regards
Bharadwaj Hari

Similar Messages

Behaves odd after a row is removed

I am able to add new rows to the table and remove a row using table.getSelectedRow().
But when the next time I try to add a new row, it adds the row but the setValuesAt() doesnt seem to work. I debugged the values and they seem to be there.
Do I need to do anything else after using getSelectedRow().
Thanx for your help.

try firing an Event on the table model or table
Regards,
Bkhe

Trackpad behave odd after upgrading to Snow Leopard

I've just installed the excellent Snow Leopard and the update to 10.6.1. Without changing anything else on my much loved mac the trackpad has got a strange behavior of accepting single klick only on its own terms.
Sometimes a slight touch result in a klick and sometimes I have to klick several times before its recognized as a klick. Irritating and annoying.
Seen in other posts that the track pad seems to be somewhat difficult to master and cause several problems with Snow Leopard. Any ideas would be helpful. Maybe I'd better down grade to regular Leopard again (but no that's what the PC guys does).
BR /C

A hardy welcome to you. PC comment misleading. Only some go back and for specific reasons not inability to fix their problems. I think your problem is deeper than lack of practice with the trackpad under SL. You could try re-installing SL over SL (via simple upgrade, of course).
Message was edited by: donv (The Ghost)
Message was edited by: donv (The Ghost)

Trackpad behaves oddly when firewire is used

All of a sudden my trackpad start to behave oddly when I have a firewire device connected. Specifically a MOTU Ultralite mk3 hybrid paired with a MOTU ultralite mk3 firewire. The problem started yesterday when I launch Logic Pro X. a minutes after the trackpad starts to be unresponsive and the pointer moving in wrong direction or jumping.
I tried to reset the PRAM with no luck. Even worst, when I tried to boot the macbook pro after rebooting the system freezes on the logo screen when the firewire port is used with that device. when I disconnect the firewire port the problem totally goes away.

RE: Crash Report
http://discussions.apple.com/message.jspa?messageID=2972949#2972949
RE: Guiness (nee Harpoon) Solution
Perhaps it is now time for the Harpoon solution (aka the Guinness solution in the mid and far west)
for those not in the know:
1. turn everything off.
2. unplug firewire cables
3. unplug power cords
4. get up from well worn chair
5. walk to refrigerator
6. open refrigerator
7. remove bottle of Harpoon (Guinness, local micro brew, etc)
8. pop cap
9. pour into glass ( you AREN'T going to drink it from a bottle, are you?)
10. sip responsibly. enjoy the moment. think pure thoughts
11. return to kitchen. If less than 15 minutes has elapsed, have another. Otherwise, retrurn to edit room.
12. Plug everything back together
12. fire up external monitors, VTR, external hard drives & computer in that order.
Does it work now? If yes, congratulate your self. If not, oh well, but at least you are in a much better frame of mind to begin some serious troubleshooting.
cheerios,
x

Is your Mail behaving oddly?

Hi there,
I have a .Mac account. I have the following weird behaviours:
1) When I read something, the email is not being marked as unread.
2) Sometimes I can't delete what I have just read.
3) it exaggerates the number of emails that are supposed to be in my inbox. (e.g. at the moment I am supposed to have 13 in my inbox, but I can only count seven).
4) Now it won't show what is supposed to be in my Inbox (but is not saying that the application is not responding).
5) I also appear to have gained a new .Mac account. which I want to get rid of but don't know how.
Er, any thoughts?
All the best and thanks,
Luke
iBookG4 Mac OS X (10.4.3) Bought December 2005 London
iBookG4 Mac OS X (10.4.3) Bought December 2005 London

Mail.app is behaving oddly rather suddenly for me, too. But just like the other person I'm not having a problem similar to the one you describe. Instead the issue I have is an ability to quit the software. The only way to quit this app right now is to shutdown my computer. Otherwise, if you try quitting you get into a loop. The app appears to quit, but then after seeming to have quit for a few seconds, it opens itself again and the loop continues. No other problems have accompanied this. I've done no upgrades that might have lead to this.

LR 3.56 behaving strangely after update to MAC OS 10.7.2

When I go to the develop module with a previous import, and click on an image in the small row of images below the main part of the window, the large image says loading for a few seconds and then ends up black. If I then go to the slideshow or print module, the same image displays properly.

Problem resolved: I re-installed MAC OS 10.7.2 and LR3.5 started behaving just as before- works very well. I was suspicious because another image processing program started behaving oddly.

Macbook Pro (mid 2012) inbuilt Track pad behaving erratically after fresh install of Yosemite 10.10.2

I recently did a fresh install of the OS from online recovery. Mountain Lion was installed which I immediately upgraded to Yosemite 10.10.2. The trackpad started behaving erratically after two days. I seems that it started since I plugged one of my wifi router on the lan port. The trackpad is impossible to move as it seems to have a mind of its own. An external mouse connected works fine. Any help please !

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

OS 10.3.9 Running slowly and behaving oddly

My system has been behaving oddly recently. In every application and category therefof. Pages load very slowly, then normally. Sometimes they won't load at all, can't find the server, then they load immediately a few moments later. Various applications will come up very slowly, then, at other times, come up quickly. I have tried turning it off, waiting, then turning it back on. No help. Although my disc space that needs reclaiming seems to have increased exponentially since I first began using the mac two years + or - ago. I have all the updates, security and otherwise, installed. I am wondering if I am infected with avirus of some sort, spyware, whatever.
What is a good spyware, etc. anti-virus application/software for mac that doesn't completely clog it up?

Hi BHJ,
you should try some system maintenance first: MacOS X 10.3/10.4: System maintenance
If this answered your question please consider granting some stars: Why reward points?

Settings dont transfer after netinstall deployment

Hi all,
I am stumped with this one.
so I created my model image, with the client account, with all the settings as per request. I check all the setting before creating the image using SIU on os x 10.5 server. SIU creates the image successfully and I deploy the image on to a test machine via my network and all works fine. how ever when I go into the user account all the settings are gone. most of these are adobe photoshop, bridge cs3 settings. but even options like turning off blue tooth dosnt seem to work.
in this environment we dont use ldap so using workgroup manager is out of the question (although I am trying to promote its use). So I thought about changing the english.lproj file. my reasoning being that after the deployment its going back to a default setting. if I change the default setting we should be fine. so I changed the english.lproj file on my image system. tested it out by creating a new user and everything worked, I had a permissions issue (chmod 775 or 755 i cant remember now on the english.lproj file, got the permissions I needed but with a + on the end.. I have no clue what that is), I probably need help with as well, but over all it worked.
So I created the image using SIU and deployed it. but when I logged into the user account all setting were forgotten. I logged in as admin, added a new account and logged into that same thing, all the default settings were forgotten.
so at this point I am kind of stumped. is there some setting in SIU I am missing? any help greatly appreciated.. I should say that I am on a time crunch as well.
thanks
J

hey guys just an update, no progress yet as for some reason now the netinstall process doesnt want to work. I can see the images on the client when I go to choose it from the startup disk option in sys preferences. select it, it restarts and then goes to the blinking globe and hangs there for a while and then goes to the normal os bootup,
on the server, the log just says
BSDP INFORM [en0] 1,0:xx:xx:xx:x:xx NetBoot009 arch=i386 sysid=MacPro3,1
NetBoot: [1,0:xx:xx:xx:x:xx] BSDP ACK[SELECT] sent xxx.xxx.xx.xxx pktsize 391
hand no luck shutting the service down, or restarting the server.. trying it again.. going to get a cup of joe and will try again
j

Toplink broken after EAR deploy

After I deploy or re-deploy an application to OC4J 10.1.3.1, the application produces the following error:
Exception [TOPLINK-6007] (Oracle TopLink - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.QueryException Exception Description: Missing descriptor for [class com.htch.aps.tvsaudit.model.Tvsaudit]. Query: ReadAllQuery(com.htch.aps.tvsaudit.model.Tvsaudit)
Tvsaudit is a "model" class in my application.
If I then restart the Instance under which the application is deployed, Toplink works without error. (Restarting only the application does not solve the problem)
Why might Toplink be messed up after the deploy?

The issue is that your descriptors are still referencing the old undeployed classes.
You need to refresh/reload your TopLink session. If you are using the SessionManager you can call,
getSession(<name>, true /*login*/, true /*refresh*/)
to refresh the session.
Or use,
getSession(<loader>, <name>, <app-class-loader>, true /*login*/, false /*refresh*/, true /* refresh if class loader changed */)
to force a refresh on re-deploy in general.
But perhaps best store your TopLink session in a static variable in a class in your application. The first time this session is access load it from the SessionManager with the refresh option. This ensures that on re-deploy you will get the correct session.

Need to reconfigure the VM after vm deployment

Hi All,
I am having a script to deploy a VM from an CSV file . I need to change the vm ( CPU & Memory) configuration after vm deployment. where the name of the vm should be taken from csv.So any help is much appreciated.
Attaching the script used . ( downloaded and works fine)
$vms = Import-CSV D:\vm-deploy\vm-deploy.csv
foreach ($vm in $vms){
      $Template = Get-Template $vm.template
      $VMHost = Get-VMHost $vm.host
      $Datastore = Get-Datastore $vm.datastore
      $OSCustomization = Get-OSCustomizationSpec $vm.customization
      New-VM -Name $vm.name -OSCustomizationSpec $OSCustomization -Template $Template -VMHost $VMHost -Datastore $Datastore -RunAsync
## This cmd need to execute after the vm deployment completed. The VM name should come from the 1 colum of CSV file
Set-VM $vmname -NumCpu 2 -MemoryGB 5 -Confirm:$false
Write-Host "All vms deployed, " -ForegroundColor Green
Disconnect-VIServer -Confirm:$false
CSV file looks like this
Name,Template,host,datastore,customization
Test-VM,vm-dep-test,ESX02,P5-vm-stage,vm-deploy
Thanks in advance.....

A simpler, but not optimal, solution is to use the Wait-Task cmdlet.
Something like this
$vms = Import-CSV D:\vm-deploy\vm-deploy.csv
$tasks = @()
foreach ($vm in $vms){
      $Template = Get-Template $vm.template
      $VMHost = Get-VMHost $vm.host
      $Datastore = Get-Datastore $vm.datastore
      $OSCustomization = Get-OSCustomizationSpec $vm.customization
      $tasks += New-VM -Name $vm.name -OSCustomizationSpec $OSCustomization -Template $Template -VMHost $VMHost `
          -Datastore $Datastore -RunAsync
Wait-Task -Task $tasks
foreach($vm in $vms){
Set-VM $vm.name -NumCpu 2 -MemoryGB 5 -Confirm:$false

Problem "A serious error..." after msi deployment (8.0 on Vista)

Environment is Windows Vista Business with UAC enabled in a Win2003 policy controlled network.
Files used:
acropro.msi provided on the Adobe Acrobat 8 Professional volume licence CD.
acropro.mst created with Adobe Customization Wizard 8.
Command executed:
msiexec /i \\mynetwork\...\acropro.msi transforms=\\mynetwork\...\acropro.mst
Situation:
After successful deployment of Adobe Acrobat 8 Professional, when Adobe Acrobat 8 Professional is run, after about 5 seconds I get the message saying: "A serious error has been detected and Adobe Acrobat 8 Professional cannot continue. Please reinstall the application and try again".
After searching google, this seems related to the activation service unable to contact a licence server.
Our volume licence CD is supposed to be pre activated. In fact, after manually running setup.exe on the same CD, everything works. And no activation is necessary. But not so using the msi.
My question:
I want to deploy Adobe Acrobat 8 Pro using only the msi. Anyone has a idea?

Our problem was partly solved by ordering another CD with ALM (Auto License Management) disabled from Adobe. See the reference.
http://www.adobe.com/elicensing/licensemanagement/alm/
Then Acrobat 8.0 installs Ok under an Admin account. The Acrobat 8.1 patch renders the software useable with non admin credentials.
Regards,
Michel

Cannot download 3.06 ovi maps for 5800XM after har...

Cannot download 3.06 ovi maps for 5800XM after hard reset. Any clue what's going on?

Similar problem on my E71 phone after upgrading the firmware to 300.21.012
I.e., when I start the application - it closes in a half way. Uninstalling is impossible.
When I start Nokia Maps updater - it says:
"Error. Cannot update licenses. Missing phone info: IMSI or IMEI cannot be obtained (20)."
Possible reason:
I've used Nokia Maps - Ovi beta before updating firmware to 300.21.012. After firmware update, I've updated Nokia Maps successfully with Nokia Maps Loader from the computer under Windows XP. But later I've restored phone info from backup, from another computer which is runing on Windows Vista. After restoring backup - I see my messages, etc., but Maps don't work at all (as written above).
Connecting through another computer (which runs under Windows Vista) - it says: "There are no new updates for your phone! Manage your maps and voices with Map Loader". But when I start Map loader - it looks as previous version loader; and allows only load voices, not maps. And still I can not start Maps in my E71 phone.
So how can I start using Nokia Maps again?

Maps not responding after ios6 upadation on ipad2

Maps not responding after ios6 upadation on ipad2

Close the Map app on the Task Bar and re-launch.
1. Double-click the Home button to reveal Task Bar
2. Hold Map app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen

HERE maps not working after update

I have a Lumia 822, and after installing the updates yesterday, HERE maps (formerly Nokia Maps) crashes immediately after finding my location. I literally can't do anything with the app.
This doesn't seem to be an isolated problem (Several users at WPCentral commented on it), but I haven't seen anything in the Nokia Support discussions yet, so figured I'd open up the floor.
Anyone else experiencing issues?

Do you have any suspicions as to what may have started it working again? Did you restart or reboot the phone or anyting like that?

Mapping behave odd after re deployment

Similar Messages

Maybe you are looking for