Mapping between ICProfiles in CRM 5.0 VS Business role in CRM 7.0

We're upgrading CRM Webclient UI from CRM 5.0 to CRM 7.0. As per Upgrade Master Guide, there is listing of Migration activities. We're working on Migration Activities for IC Profiles in CRM 5.0 to Business Role in CRM 7.0.
Please advise us how to do mapping to set up Business Profiles on the basis of IC Profiles in CRM 5.0
Thanks,
Saeed

This issue has been resolved. MAy be closed.
This is manual mapping process

Similar Messages

  • Mapping Z account group in ERP to Z BP role in CRM

    Hi all,
    We have a scenario where we need to download customers created in custom account groups into CRM and map them to Business Partners in Custom BP Role. With PIDE settings, you can only map a Account Group to a CRM classification. This classification is mapped to a standard BP Role in CRM. We also tried to implement the note 914437. But the code given in this note doesn't work as desired. If anyone has implemented this scenario and/or used this SAP note, please advise me on the solution approach.
    Thanks & Regards,
    Karthik

    Hi Krishna,
    I have the same required as yours.
    I implemented the note 914437.
    I noticed two peculiar cases from the standard mapping i.e. (standard BP Role sold to party)
    1) In BP transaction, in Display in BP Role drop down list box there is no custom BP Role as shown above but if I select the detail Icon I can find it there as shown in below screen shot.
    2) I found in Tx BP there is only one BP Role as shown above but in CRM Web UI there are two BP Roles in the ROLEs assignment block.
    Could you please add your comments or solution for it.
    Thanks,
    Raja

  • Could you check your CRM system for a business role?

    Hi Forum,
    i have difficulties getting my business partner from IS-U to CRM in an initial load because a business partner role is missing in CRM. The role is 'MKK' Contract Partner
    It exists in IS-U but not in my CRM. As i cannot create that role in CRM because it is in the SAP namespace i would like to know if it exists in your CRM system. And - if you can say - how it came there. By default/installation or later by middleware processes.
    Thank you

    Please - just make a little check in your CRM system...is there a role 'MKK' contract partner or not ??
    From that depends where i can continue searching for the error
    SPRO -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Business Partner Roles -> Define BP Roles
    Thank you

  • Calling one business role from another business role on CRM web client

    Hi,
    I have a requirement where, one business role can be launched just by click a navigation link on another.,
    For eg. in a UTIL_IC role frame work , I add a link by clicking on it, I go to UITIL_SALES role.
    This is required so that person need to launch crm_ui_frame again if he wants to login for another business role assigned to him..
    Please suggest the solution if possible for this one.
    Regards,
    Pratyasha Shishodia

    Hi Kavita,
    We are facing the same problem. Did you manage to solve this and if yes how?
    Kind regards
    Lars

  • Mapping Between Business Partners and Customers in CRM and ERP

    Hi,
    I wanted to know how are the business Partners and Customers replicated from ERP to CRM systems and Vice Versa. I would also want to know how can i check this mapping in the tables.
    eg: Get a customer or BP from the ERP system, how do i find it in CRM system.
    Regards,
    Rishav

    Hi Rishav,
    Here is how it works.
    The table for customers in ERP is KNA1 and the field for customer number is KUNNR.
    In CRM the table CRMM_BUT_CUSTNO contains the mapping between customer number in ERP and the BP GUID
    in CRM. The table BUT000 in CRM contains the mapping between BP GUID in CRM and the BP Number
    Apart from that the table CRMV_BUPA_CUSTNO contains the mapping between Business Partner Number and Customer.
    Hope this clarifiies your doubt.
    Best Regards,
    Shourav.

  • Any inbuilt Function Module available in CRM to create a Business Partner

    Hi All,
    I need to create a business partner in CRM not manually through GUI. I need to develop a function module that will create a Business Partner in CRM.
    Can some one tell me if there is an in-built BAPI/Function Module availabe in CRM to create a business partner in CRM.
    When i researched i found that there is a BAPI BAPI_BUPA_FS_CREATE_FROM_DATA2 which can create a business partner in CRM.
    I dont know how to use this BAPI, can some one help me with some sample code.
    Also will the development of a function module differ in CRM when compared to ECC?

    Hello,
    Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
    p.s. If you don't see combobox mentioned above, it could be security issue.
    Kirill

  • Master Data mapping between CRM/ERP(SD)

    Hello Colleagues,
    I am having CRM system and it is connected to the ERP(SD) system.
    Now I want to replicate below Master Data from ERP to CRM. So that I should have corresponding mapping details for the same.
    1). Business Partner
    2). Sales Organization
    3). Distribution Channel
    4). Division
    Questions:
    a). In which individual table I can find corresponding mapping (crm/erp) of above master data?
    b). How will I download the data in these tables?
    Thanks and best regards,
    Pragnesh

    Hi Pragnesh,
    You can refer to scn other threads before making these posts.
    However, following are the tables.
    1). Business Partner - BUT000, BUT020, BUT050, BUT100
    2). Sales Organization - CRMM_BUT_FRG0081
    3). Distribution Channel - CRMM_BUT_FRG0081
    4). Division - CRMM_BUT_FRG0081
    Thanks,
    Faisal

  • How to find the mapping between External Object Name and Business Obj.

    Hello Gurus
      Anyone who can help me? I would like to know is there any way to know Business Object is behind object associated to Context Node, it seems that for some cases is easy but for instance for object BuilHeader is not the case, at least for me.  View BP_ADDR/StandardAddress, which belongs to UI Component BP_ADDR, has context node HEADER which is associated to BuilHeader. In case to enhance that object (to add new attributes), using EEWB, I need to know what is the business object behind that external name. Somehow I cannot find the mapping between external name BuilHeader and Business Object. 
      Kind regards
    Aleksandar

    Hi Aleks,
    If you want to enhance Business Partner, the object you are looking at should be "BUPA" in EEWB. To my knowledge, there is no place where this kind of mapping is maintained.
    Note 484597 describes where to find the Cookbook  which describes the enhanceable objects and the enhancement process.
    In case your requirement is to add table attributes, you can also  take a look at the wiki link:
    http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
    Regards,
    Nisha

  • Role mapping between Portal and Back end systems

    I am new to SAP EP.
    I just want to know how the mapping between portal and back end system happens.
    Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.

    Hi,
    Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
    Regards,
    Samir

  • Mapping between the info cube fields and fields in the data source in sap r

    In Bi7.0 in which database did the mapping between the Infocube objects and the datasource object will be store Here i have used the r3 system

    Hi,
    Chk table RSOSFIELDMAP.
    Regards,
    Gunjan.

  • Password Field not mapped between Request and Provisioning Form

    Hi to all. I'm working with OIM 11g. I've faced a strange issue. I'm not sure I'm working properly, so let me explain you my case. In my installation I've got the SSH connector, which is correctly connected with the physical resources. I've loaded the resource dataset ProvisionResourceSSH User bundled with the connector. Consider now that the user "goofy", with "ALL USERS" role, tries to make a request Provision Resource SSH User (Request Based provisioning). He fills in all the field in the appropriate manner, but when OIM triggers "Create User" provisioning task, after the required approval process, the password field is always blank (although goofy filled it in!!!).
    I've thought: "ok, it seems a role trouble". And effectively, if goofy has got also the role "REQUEST ADMINISTRATORS", the provisioning form shows the password field correctly valued (as goofy stated in his request).
    Note that all the fields are correctly mapped between request dataset and the provisioning form (I'm using the original dataset and the original provisioning form installed by the connector). So all other fields filled by goofy on the request form (request based provisioning) are correctly passed to the provisioning form. All the fields, except for the password.
    Am I wrong in something? How Could I make possible to pass the data filled on the request for the password field to the provisioning form even if the requester has not the role "REQUEST ADMINISTRATORS"?
    Thank you in advance for the help.

    This sure seems goofy! ;-) ... can you try making the ALL Users have all the permissions on the Resource Object and the Process Form and test it out? Also try from the backend at the database and see if the table has NULL for the password field? ... What's the type of password field in the dataset and the process form? Encrypted/Secret at both ends or mis match? Try making them plain text both the places as well.
    -Bikash

  • HELP with mapping between event_class SLA R12 and ap_invoices_all

    Hi Gurus!!
    I have to do a query that obtain the event class (XLA_ACCOUNTING_CLASS lookup code) of an invoice that this invoice is pending to be posted. The question is how do i do a mapping between AP_INVOICES_ALL table and the EVENT_CLASS ???
    For example... i have a class named "DEBIT MEMOS" but in the AP_INVOICES_ALL the INVOICE_TYPE_LOOKUP_CODE is DEBIT...
    hope someone could help me,
    PS: Application is R12
    Thanks!!
    Pablo.-

    Hi Tarun,
    Yes I am aware of that, but I just thought someone would which fields to join between the AP and the XLA tables as I can't find anything on the eTRM. So I do know that those are the tables to link, but I'm just not sure of the fields to join.

  • Mapping between Sales Order-Schedule-Line and Delivery-item

    Hi together,
    I want to extend the Datasource 2LIS_12_VCITM (Delivery-number, -item, Order-number,-item is available) by Sales Order Schedule Line.
    Could not find any ERP table (VBEP and LIPS allow a mapping only on item level) for the mapping between Sales Order Schedule Line and Delivery item yet. The use of the extractor 2LIS_12_VCSCL for the extention (e.g. infoset) afterwards is no option.
    Thanks for your help in advance!!
    Assign full points!!
    Sven

    Hi Reddy,
    thanks for your answer.
    I know that I have to add this field.. but the problem is, how to fill this field. I don't know how to map the delivery-item with the schedule line-item.

  • Error while running code template mapping between two oracle tables

    Hello All
    Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
    java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
    c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
    ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
    ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
    ORA-06512: at line 4                                        
    Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
    ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
    ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
    ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
    ORA-06512: at line 4
    Quick help is highly appreciated.

    Dera Dallan
    its only a target user for the workspace where you are deploying the mapping from.
    I have two repositories for two different projects. each repositary has its own workspace.
    ex:-
    Project 1
    Work space bpms_rep_owner
    Repositary owner bpms_rep_owner
    Repositary user bpms_rep_user
    Project 2
    Work space dem_rep_owner
    Repositary owner dem_rep_owner
    Repositary user dem_rep_user
    Reg
    S.Gyazuddin

  • Difference between SAP Business Workflow and CRM Workflow

    Hello guys,
    Is there any difference between SAP Business Workflow and CRM Workflow?
    Are there others workflows types in SAP?
    In all SAP Workflow Courses (BIT600, BIT601, BIT603, BIT610) only was talked about SAP Business Workflow, and nothing about CRM Workflow.
    Thanks a lot!
    Kleber

    Hello Kleber,
    There is not much of the differance between CRM workflows and SAP Business  workflows..
    Workflows are esentially part of Basis (BC) components and hence its the same across all SAP products as all these products have components of Basis(BC) in them...
    To Conclude, SAP Busines workflows and CRM workflows are the same things... However when you work on CRM, the BOR objects would be belonging to CRM and not to ECC... However conceptwise , there in no change at all.. If you learn BIT100......, you can also work on CRM workflows..
    Regards,
    Anand

Maybe you are looking for