Mapping ECC to CRM

Hi,
I am new to abap and I have this requirement to work on. I need to create some tables in ECC and then map those tables to CRM via the middleware. And data has to be passed from ECC to CRM everytime there is a change in ECC. Is there any tutorial or link that will explain to me how I can MAP ECC and CRM. Please help.
Moderator message: sorry, these forums cannot replace proper training, please search for available information.
Edited by: Thomas Zloch on Nov 29, 2011 1:03 PM

Hi Kris,
We  maintain the mapping between ECC BP Grouping to CRM BP Grouping in ECC with transaction code PIDE.
In your case do the following settings is required in PIDE -->R/3->CRM: Assign Account Grp. to BP Classification
Values are maintained in ( )
Account Group (CUBP)  
Description(Sold To party)       
Classification    (B)
BP Grouping    (Z1)       
External (Tick     )
Maintain same number range in ECC & CRM.
Best Regards,
Rajendra Sonawane

Similar Messages

  • Error in BP Mapping from ECC to CRM 5.0 -Specify a card type error

    Hi gurus,
    I have taken
    *Specify a card type-Message no. R1561*
    error in case of mapping cust_main data from ECC to CRM 5.0. When I check the selection result of Bdoc messages by getting SMW01 facing with above this error.
    Could you please help me to overbeat this error in a quick way in order to map properly...
    Thanks so much
    Best regards,
    Fahrettin Kerem BOZBIYIK

    Hi Kai,
    Firstly thank you for your notes notification!
    That's right symptom is right over there but in our ECC system my related customer has no credit card type data in payment cards data tab so that why would I have taken the Bdoc validation error occasionally in case of mapping process to CRM 5.0 such as I mentioned?...
    Best Regards,
    FKB

  • ECC to CRM Mapping Issue for vendor data

    Hi,
    I am facing an issue for replicating vendor data from ECC to CRM. One of the vendor is not confirmed at ECC side and one vendor's time zone is not maintain in the master of time zone in CRM side. This may be the issue.
    But Where exact we can see that mapping of the tables of ECC and CRM. So in future we should maintain mandatory data based on mapping to avoid BDOC failure.

    Hello Rahul ,
    The field (MARA-BISMT) is not used in CRM system. If you want this
    field to be maintained in CRM as well, and to be transferred from R/3
    to CRM you must enhance the standard by customer extensions.
    The procedure for customer enhancements for Download from R/3
    to CRM is described in the following document:
    SAPNet, alias crm,   > Media Library   > Documentation   >
    Key Capabilities   > Master Data   > CRM Product: Customer
    Enhancements for Download/Upload
    For further information about Product Master enchancements and how to
    find techncical documentation about it please refer to the attached
    Note 428989.
    Thanks & regards,
    Krishnen

  • Mapping error while downloading the condition records (ECC to CRM)

    Hello Experts,
    We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
    When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
    While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
    I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
    If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
    I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
    Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
    Error when carrying out delta download (Message class: CND_MAP)
    I am a technical guy and dont have much idea in CRM Middleware.
    I welcome your valuable thoughts and will award full points.
    Regards,
    Jeo

    Hi,
    As you mentioned i checked for the followings:
    >>In Maintain field catalog:
    I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
    >>Create condition tables:
    I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
    Please suggest me, now what i need to do?
    Regards,
    Jeo
    Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

  • How to map service contract data from ecc to crm

    Hi Experts,
    Please help me,how to map service contract data from ecc to crm system.
    is there any perticular process.please let me know.
    thanks in advance..

    Hi Srinivasulu,
    Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
    Check the Partners mapping from R/3 to CRM and that will be all.
    I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
    Good Luck.
    Sharath.

  • Mapping of field from ECC to CRM - DChain-spec. status field

    Hello,
    In my current assignment we will be downloading all the master data from ECC to CRM. For a particular requirement, we need a field in COMMPR01 in CRM from material master MM03 in ECC.
    Field Location: MM03> sales:sales org1>DChain-spec. status
    Please find below technical infomation for that field ( ECC)
    Field Data:
    Table Name: MVKE
    Table category: Transparent table
    Field Name: VMSTA
    Data Element: VMSTA
    Field Description for Batch Input
    Screen Field: MVKE-VMSTA
    Program Name: SAPLMGMM
    Screen Number: 4000
    Please help me in locating the same field in CRM (COMMPR01)
    Regards,
    Vipul

    Hi Vipul
    Please implement note 1494159. This should doanload this field as well then.
    Best regards
    Christophe

  • Contact Person - Mapping ECC-CRM

    Hello,
    Please suggest best practices of creating contact persons in CRM
    Our scenario is existing customers and contact persons would be uploaded in ECC which need to be replicated in CRM
    All new customers and contact persons would be entered in CRM only post golive.
    User have multiple contact persons with different addresses for every corporate account in CRM
    Thanks,
    Satish

    Hello ,
    PIDE settings in ECC:
    CRM--> ECC : B(Classification) - Z001 Ext Account Group of ECC
    ECC-->CRM : 0001 Account Group - B(Classification) - 0001 - Ext No Range (ECC)
                          Z001 Account Group - B(Classification) -0002 - Int No Range (CRM)
    Please suggest how to maintain Account group and number ranges for contact persons in ECC and CRM and PIDE settings for the contact person.
    which classification need to be used in PIDE
    Thanks,
    Satish

  • Replication of Customer from ECC to CRM --- Multiple A/c Groups

    Hi Experts,
    I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
    Now, I want to replicate customers with 5 other A/c  groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
    This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
    My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
    From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
    But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
    Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
    Thanks and Regards
    Varun Taneja

    Hi Robert,
    I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
    Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
    Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
    And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
    Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
    I hope I am clear about my requirement.
    Please share your feedback.
    Thanks and Regards
    Varun Taneja

  • Replication of Material Sales status (with user values) from ECC to CRM

    Hi all,
    I 'm trying to find out how to replicate the  sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA)  to the Material SAles statuses in CRM.
    The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
    Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
    I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
    But, now, how can i replicate the sales statuses of the ECC materials to either :
    -the product status (header) in CRM, or
    -the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data  ?
    Is a specific development needed?
    there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
    thanks a lot

    It seems that there is no mapping between ECC and CRM sales area.
    If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start  down load from ECC.

  • Replication of partner function from ECC to CRM

    Hi experts,
    We are working on CRM 5.0 with back end ECC 6.0
    In our scenario we are creating sales orders in ECC and replicating it to CRM.
    Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
    Is there any way by which we can populate this ?
    Points will be rewarded for suitable solution.
    Regards,
    Madhu

    hi
    just mainatining partner function wont be enough ,you need to do two things
    1. mapping of BP function between CRM and ECC
    2. specify the path from ECC to CRM so that they can be replicated successfully
    so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
    this is the path where in distribution you need to specify the path
    and maintain there the mapping between the R3 and CRM
    RFC destination should be CRM and source is ECC
    best regards
    ashish

  • Customer classification data from ECC to CRM

    Dear Friends,
    We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer  classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
    Thanks,
    Rajinikanth G

    Added new fields using AET and did Middleware enhancements as per the note -  Note 736595 - Exchange of EEW fields with R/3 customer master.
    Thanks,
    Rajinikanth G

  • Integrating Data From ECC to CRM

    Hi  Experts,
    My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
    Problem: to map the data from ecc to CRM , I am supposed to call this  RFC Fm ( existed in CRM side) from ECC using RFC Destination.
    to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
    Thanks & Regards.
    Naga Priyanka. T
    Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
    Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

    Hi Kumar,
    Please select the following parameters when downloading the HR Org from CRM:
    You can do this  in the program RHALEINI (or in the transaction PFAL, which has the same function)
    Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
    Objects:
    1. Plan Version: 01
    2. Object Type:  *
    3. Object Id: Copy the Object Ids which you want to transfer from HR System
    4. Object Status: *
    Reproting Period: All
    Structure Parmaters: Blank
    Transfer Mode:
    Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
    Update: this will update the change records in CRM system
    Message Types: HRMD_ABA
    Also check SAP Note: 119780
    Hope this helps.
    Regards,
    Madde

  • Sales area missing after Product download --ECC to CRM

    Dear SDN team,
    Im facing a issue after downloading few products from ECC to CRM using Middleware .
    The Products have been download successfully , but the Sales area for Product is missing in CRM system .
    I have correctly mapped the ECC sales area to CRM in txn PPOMA_CRM and also enabled the u201CObj permitted for distributionu201D for the Sale Org in CRM
    I have also downloaded all customizing settings related to Products and Sales areas.
    Can someone please help me here ? Is there any customizing settings I need to make in CRM or change the Products in ECC??
    Please help here
    Regards,
    Dinesh Rao

    Hi Shalini,
    Thansk again , but the problem is not resolved yet .
    I creating a dummy product in ECC with correct Sales area details ( as mainatianed in CRM as well) and downloaded this product from ECC to CRM.
    But still the sales area is missing for the Product !!
    I checked the BDocs as well and there are no errors here as well
    What could be the problem ??
    Please help
    Regards
    Dinesh

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

  • Communication between ECC and CRM

    Hello,
    I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
    I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
       I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
    Probably communication between SD module of ECC with CRM.
    Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
    Any help is really appreciated.
    Thanks
    -Vishal

    Hi Glenn,
          I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
    Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
    My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
    Thanks
    -Vishal

Maybe you are looking for