MAPPING ERROR FOR CND_M_SUP - Split of VAKEY fields failed
Hi,
in CRM our customers request some controls for products that they enter in trade promotion(CRM_MKTPL) These are related to "Listing & Exclusion" of R3 system. So we need to download R3 tables into CRM that are related to "Listing & Exclusion" from R3. We have a table named KOTG804 (Customer/Material) in R3. And in CRM we create a table named CUS804 in the Listing header with the key fields like KOTG804. Then we create download object DNL_COND_G804. And start the initial load for this object. But we have promblems. The errors in SMW01 are like that :
- Records of table CUS804, usage LI cannot be exchanged
- Split of VAKEY fields failed (Block 1; Appl. LI; Use CRM)
- Error when carrying out initial download
How can we solve this problem and take the KOTG804 records from R3 to CRM?
Thanks.
Hello
Did you find out what the problem here was? I am facing the same situation. Could you help?
Reagrds,
Sowmiya
Similar Messages
-
Mapping error for MessageSplit
Hello,
I am getting mapping error when i tried the scenario MessageSplit using BPM.Could somebody guide me in this context
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure i have followed this blog, but during mapping i have created mapping using createIF node functions when i test the mapping i am getting the below error as cannot produce target element check the source xml instance, i am newbie to this world.
RajeshHi,
Check the transformation step again and check this thread An empty container element
Also try to post one question per thread. Close the thread once you get the reply for the original one.
Thanks! -
Mapping error for file scenario.
Hi ,
I am working with the help of this scenario to pick only selected files.
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I am getting error in mapping . Everything i have checked its correct . Mapping is correct . but still its giving error . how can i solve it .
Error : RuntimeException in Message-Mapping transformatio~
Thanks ,
Syed.Dear Syed Kumar
Based on the blog you are executing the scenario I guess. The scenario is clearly focusing on the picking up the files using the mask attribute in File Access Parameters.
As you mentioned clearly, that you are getting mapping error plz concentrate on how to rectify the mapping errors.
will guide to do so.
1. Go to SXMB_MONI and in the integration server and check for the message you are trying send.( I hope you did this)
2. As it is giving you mapping error, Double click onthe message Flag showing red.
3.Plz check the Payload XML content copy that content and paste in the message mapping Test section of IR.
4. Execute the Test. If you get the message at the receiver side there shouldn't be any error.
If you still get the error let me know.
Best of Luck
Reward Points If found use ful.
Edited by: Praveen Kurni on Jun 13, 2008 7:43 AM
Do the Interface mapping test as well if you are successful in message mapping. -
Idoc error mapping error for segment "E1EDT13 006" in DESADV idoc
Hi SAP Gurus,
DESADV IDOC for few articles is not getting passed from SAP to legacy system. It is missing one segment"E1EDT13 006" for goods issue.
Why is this mapping error happening. How can this be resolved.
Regards.
SumiHi Nsangle/SAP gurus,
Thanks for that. But, I have already compared the failing idoc with the successful one. It's the segment E1EDT13 006 missing in the wrong idoc. I have already added that idoc and reprocessed it.
But, I wanted to know why such kind of idoc segment missing/ mapping error happens.
Regards.
Sumi -
Mapping error for larger messages
HI,
My senario is File to File with some conditions ( Conditions are written in UDF )
When i am executing the payload with small size mapping executes correctly .
But when i am executing with larger payload Mapping executes but not taking any conditions in UDF , It executes as one-one mapping.
thanks in advanceHI
This should not be the case... if your UDF is working fine for smaller payload then it should work for larger payload also..
- test mapping by using payload and after that in mapping use display queue wherever you have used UDF and try to to see what is input and what is the output.. and this will give you clear idea about what exactly is going on..
- I guess something wrong with logic which you have used in UDF or is input payload dependent, so try to use display queue to get clear idea about UDF working.,.
Thanks,
Bhupesh -
Error for input method in 'Work' field of Activity
Hi gurus,
I have this problem while planning an internal activity.
In the work field, i have to put a value of 1800000 (18 Million) m3,
but when I do so, I am getting an error " Input must be in the format ___,__~._
I have checked the user profile in SU3, the format is 1.234.567,89
Kindly, suggest the proper format, how can I enter the quantum of work.
Regards,
VDSThis is because the field Work 'ARBEI' is 7 units long with 1 decimal place. So max. value possible is 999999.9 (which is less than 1 million). Try distributing the work on other activities.
-
Mapping error for EDI 823 from XI to R/3
Hi All,
We are receiving an EDI 823 from XI to R/3 and the XML file looks like this as below.
Partner No: YRDCLNT110
Partn Type: LS
Sender Information
Port: SAPYXD
Partner No: EXTD_BALE
Partn Type: LS
Whereas there exists no partner no. in R/3 by the name EXTD_BALE. The interesting part is EXTD_BALE is a IDoc Adapter Port No in XI.
Please provide inputs on these.
Regards,
KarthikHi Karthik,
Have u configure a R/3 port in IDX1 of XI. This port has the RFC destination pointing to R/3. It will be used by XI to get into R/3.
Regards,
Akshay -
Hi,
1) Internal User expected exception:
Exception: Payments,apply credits,disputes and print are not supported when multiple customer/currency transactions are selected
2) External User is throwing below error instead of throwing above exception.
Error
You are trying to access a page that is no longer active.
The referring page may have come from a previous session. Please select Home
to proceed.
found this MACCHECK from fnd logs of external user payment.
MACCHECK: . Parameter failing validation is :mode. The parameter mode with value MultiPay could not be recognized as part of Server's response on the previous request. Incoming URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/EndecaDummyPG . Current URL is : /OA_HTML/OA.jsp?page=/oracle/apps/ar/irec/endeca/webui/OIREndecaCustHomePG&akRegionApplicationId=222&_ti=1125493452&oapc=10&retainAM=Y&addBreadCrumb=N&oas=6-LL4ndIUFLX-2zjQAQD6A.. . Referer URL is : https://<hostname>:4443/endeca/web/ar/customer?doAsUserLanguageId=en_US&languageId=en_US . HTTP Request Method is : POST
can someone please help.
Thanks,
RRSWell, I compared my classpath between my windows batch file and the
makefile (that comes with the samples installation) on Solaris and realized
that I am using different sets of jars.
So, I removed the extra jars from the makefile to narrow down the
problem. If I remove the /opt/SUNWam/lib/servlet.jar from the makefile,
I can reproduce this problem on the Solaris box as well.
When I include this servlet.jar on my windows machine the program works!
Only jars I have in my classpath are amclientsdk.jar and servlet.jar which
I have copied from my installation (/opt/SUNWam/lib) on the Solaris box.
Just the same way, by copying the am_services.jar, saaj-api.jar, and jaxm-api.jar,
from the Solarix box to the windows machine,
I am also able to pull the assertions from the Access Manager.
I installed Sun Java Enterprise System 2005Q1 on a Solaris 10 machine.
During the installation, I configured to install the Access Manager
in Sun Application Server.
Why do I need to have different set of jars on the windows machine
for the Access Manager client SDK ?
Could you please point me to a download link where I could download
the correct Windows Access Manager Client SDK for
Sun Java System Access Manager 6.0 (Sun JES 2005Q1)?
Thanks. -
Custom tool error for COMexception: The report application server failed.
hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help meHello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don -
Hi
while trying to execute CHECKDB in Db13 i was getting the following error message
My Operating system is windows 2003 database oracle 10g
already referred to notes 952080, 134592 and subsequent notes
E:\ORACLE\NPE\ORIGLOGA\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
E:\ORACLE\NPE\ORIGLOGB\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
D:\ORACLE\NPE\SAPDATA1\CNTRL\CNTRLNPE.DBF 26066944 3 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk Device Total[KB] Free[KB] Used[%] MaxNeed[KB] MaxMiss[KB]
BR0252E Function _stat() failed for 'D:\oracle\EO1\102' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for D:\oracle\EO1\102 failed
BR0806I End of BRCONNECT processing: ceadprqb.chk 2009-03-17 18.06.25
BR0280I BRCONNECT time stamp: 2009-03-17 18.06.25
BR0804I BRCONNECT terminated with errors
if any faced simlar problem, please give let me know if you have a solution.
Regards
HMHello,
this type of error happens when there are permission problems. Check permission of BRtools
Check the permission of files..Check the link below for more information :
http://www-01.ibm.com/support/docview.wss?rs=667&context=SSZHVN&dc=DB560&dc=DB520&uid=swg21327498&loc=en_US&cs=UTF-8&lang=en&rss=ct667tivoli
Thanks
Anju -
FDM Mapping SPLIT/TRIM/JOIN fields
Hi All
I am using FDM to Transform a flat file to a new data file. I am a newbie in FDM.
Can anybody tell me the syntax for trimming/splitting the source field in to the target file in FDM mapping.
For Example:
In my source, the feild 'Product' has string "uranium FGIM (10010)
But on the target file, I need only the product code '10010' How do i trim this feild to get the desired output file.
Kindly let me know the syntax of the mapping.
Thank you,
JKYou can either do this as part of the mapping process or you can use an import script to parse out the desired value during the import.
If you do it in the mapping simply use your original full product string as the source and set the trimmed value as the target i.e. using explicit maps
In the import script use logic similar to your example to parse out the portion of the original product string you wish to pass as the source value. However you must ensure this logic is generic and will work consistently over all product strings.
From your criteria I imagine the mapping approach would be the simplest and easiest to manage solution -
GLT0004 - Document splitting causes causes field overflow for currency type
Hi,
Has anyone faced this error while performing MIGO?
Error " GLT0004 - Document splitting causes causes field overflow for currency type 10 in row 002)
am refering to note 1072850, but cannot find any relevant information.
Would appreciate any replies on this.
Thanks in advance,
JHi,
I have resolved the problem ,
Business transaction for document type WE changed to 0600 from 0000.
J -
Mapping Error- In IDoc to File scenario
Hi Experts,
Got the Mapping error for one interface (IDoc to file). After comparing with successful message found that the field value (TDLINE) is not availbale in first segment (E1EDT10) in idoc for this failed one.
Mapping is :
TDLINE -- Exists --- Creatif --- Receiver field(in the file)
But here due to the the empty value in first segment the message is failed in XI system, next segment values is not trasmitted to the recever end(maping is the same above). To overcome this issue please suggest the suitable mapping design in IR.
Regards
MaheshHi,
After your CreateIf, use a "IfWithoutElse" by selecting the properties "Keep SUPPRESS Values". To do that, do a right click on IfWithoutElse, choose "Properties".
With this option, you will keep the fact that you have nothing in the source, and so the target context will have a "SUPPRESS" line. I have not THE solution, so do your own test.
If it's not enough, see also about the "mapWithDefault" (but that depends of your real rule).
Regards.
Mickael -
Multiple Errors for one record in RFC
Hi,
Iam creating RFC.In RFC i have defined output structure in tables.In that structure one field ZMSG and its length is 500.so want to display mutliple errors for one record in ZMSG field output.
Using concantenation...but How to do that?send me Example code...
Regards,
Raj.clear v_error.
loop on return where type = 'E'.
concatenate v_error return-ZMSG into v_error saperated by spaces respecting blanks.
endloop.
Edited by: Pranu Pranu on May 21, 2010 9:31 AM -
Exception: non-read-only mapping defined for the primary key field
Hello.
I'm new to Oracle and I created Java EE Web Project.
And I created entities from tableA, tableB, tableC from my database.
tableA has foreign key to tableB and has unidirectional Many-to-One relationship. tableC has two primary keys and one of these is foreign key to primary key in tableA. tableC also has unidirection Many-to-One relationship to tableA.
Then I created session bean and data control from it, in design window, created read-only table from tableA.
And I selected columns in tableA and also in tableB.
I ran the application and saw the following exception in log window.
Local Exception Stack:
Exception [EclipseLink-46] (Eclipse Persistence Services - 2.1.3.v20110304-r9073): org.eclipse.persistence.exceptions.DescriptorException
Exception Description: There should be one non-read-only mapping defined for the primary key field [tableC.tableA_ID].
Descriptor: RelationalDescriptor(mypack.tableC --> [DatabaseTable(tableC)])
tableA_ID is a primary key in tableA.
How can I solve this error?
Please help me.
Edited by: 900471 on 2011. 12. 3 오전 5:32
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:33
Edited by: 900471 on 2011. 12. 3 오전 5:34There are not enough details to be sure since you have not provided the mappings. From just the error, it looks like you are using the tableC.tableA_ID field as the foreign key in the ManyToOne relationship to A, but have marked it as insertable=false, writeable=false, meaning that it cannot be updated or used for inserts.
Either make it writable (set the settings to true), or add another basic mapping/attribute in the entity for TableC that maps to the field which you can use to set when you insert a new tableC entity. A simple example is available at
http://wiki.eclipse.org/EclipseLink/Examples/JPA/2.0/DerivedIdentifiers
Best Regards,
Chris
Maybe you are looking for
-
Nano shows in "My computer" but not in Itunes
I've done everything I can find on the website, but still can't get Itunes to see the ipod. The computer can see it and it charges, but I can't do the last step in the "5 R's" on the site since I can't restore factory settings without I-tunes seeing
-
I am trying to print a document from my win 8.1 computer via my home network thru my win 7 computer which has the Deskjet 3054A All-in-one printer connected to it. I can see the printer from my win 8.1 computer and when I send a print command I see
-
How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.
-
I cannot save events in my calendar once I updated to iOS7?
I click on the "+" sign and create the event, but it won't save it!
-
Any way to stop battery charging at under 100%?
Research has shown that a battery kept at 40% charge will retain 96% of capacity after 1 year (at 25 degrees C), while a battery kept at 100% charge will retain only 80% of capacity after the same period of time. Is there any way to control the maxim