Mapping Error: Mappings are not required for this Integrator

Hi,
when I created my upload integrator with the Desktop Integrator Manager (12.1.2) I am not able to attach a mapping to it. I get the following error:
Mapping Error: Mappings are not required for this Integrator because the ability to download information has not been enabled.
Does anyone know what I've missed?
cheers
Jeroen

Hi ,
Without creating the content if you are trying to do mapping this error will come.
Solution:
Create the content and then do mapping..
Regards,
Sreekanth.S
Edited by: user12045904 on Dec 9, 2010 10:55 PM

Similar Messages

I tunes 11 will not let me sync my I pod nano... keep getting error meessage: the software required for this I pod was not installed correctly... I have tried to reinstall 6 times Dumped everything i tunes related no luck help!

I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software. I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software. I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.

Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

An accounting document is not required for this billing document

Hi,
While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
Diagnosis:
The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
But the net value is coming in the sales order and alsi into the Billing document.
gurus plz help me.
regards,
ragesh.

Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
Also please check, the posting block is activated. if it is, please remove.
Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
Please let me know, whether ur problem solved..
Reward points if useful..

Reg msg "Payment method(s) are not allowed for this program".

Hi...
I am copying a standard program RFFOES_T (Print program for bank transfer) into a custom program. When i try to execute the custom program it gives me a msg saying
"Payment method(s) are not allowed for this program".
Can you please Provide a solution for this problem.
Regards,
Indira.

Indira,
1.RFFOES_T is using Logical database PYF.Seems you have copied it as it is without changing the attributes of the program.
2.As it is using logical database PYF it needs to be tagged to the respective payment methods in FBZP settings as below
FBZP
>>Payment methods in Country
>> in the next screen click on position and give the company code and payment method
>> in the next screen select the corresponding payment method and click on the details(ctrlshiftf2) ie magnifying glass icon
>>in the next screen within Payment Medium you will get to see two radio buttons as Payment medium workbench(uses DMEE tree structure) and payment medium programs (uses the standard prog).Here in Payment medium Program either the standard prog or your zprogram should be tagged otherwise you will get the error message as you mentioned.
3.Once you tag the program in the FBZP setting to the respective payment methods,after the payment run you will be able to run the program.
4.If you don't want the program to be linked to FBZP settings then as far as my knowledge is concerned you need to avoid using logical database PYF and change the entire code using the regular database tables like reguh,regup,bkpf,bseg etc.(I think this should be the best approach)
Thanks,
K.Kiran.

Wild Cards are not allowed for this info object

Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.

Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I was trying to sync my itouch with my new mac, and some songs won't download because they are not authorized for this computer. But even after my computer was authorized they still won't sync. How do I fix this?

I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue.

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

Sharing Folio - Source .indd files are not available for this article

when sharing a folio, and opening it up in indesign 5.5 all articles say:
"Source .indd files are not available for this article"
What is the point of sharing if you can't change articles and update them?

Because you’re not sharing the InDesign files, you’re sharing the folio.
Pretty similar to sharing a PDF but not the source files.
That said, I’m working on a project with someone else and everything sits in a Dropbox folder. Only I can update the folios but my partner has access to the InDesign files.
Bob

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

IPhone 3GS won't restore (error 1600 or "not eligible for this build") no apple logo, recognised in DFU mode.

My iPhone 3GS decided to turn itself off (on 30% battery) yesterday and hasn't turned on since. After some testing (hard resets, DFU mode), tiny umbrella recognises it in DFU mode, as does Redsn0w. neither devices can successfully kick the phone out of the restore loop.
The screen stays blank throughout, no apple logo, connect to itunes logo etc. however every now and then the charging sign will appear (empty battery with a little bit filled (red)). even if i unplug it from my iMac the charging symbol stays there.
once I get the phone in DFU mode iTunes recognises that there is a phone connected that needs to be restored, it doesn't matter if I click restore or option + restore the process will fail on Error 1600 or "this device is not eligible for this build".
My iPhone is not unlocked or jailbroken. Before the incident with the coffee I managed to synchronize and update its firmware as indicated by iTunes. The latest update for my iPhone was iOS 5 firmware. My intent is not to unlock or jailbrake the device, just to make it work again.
Here are some things I've tried since:
1. Exiting recovery mode via Tinyumbrella
2. Entering DFU mode via Redsn0w
3. Shift + Restore and using firmwares from 5.0 to 5.0.1 to upgrade my iPhone.
4. Remove hosts to my Host file (in relation to the "device not eligible for this build" issue)
5. Try redsn0w and use IPSW to see if it is recognized by iTunes (iTunes recognizes the iPhone but then at the very last minute shows error 1600.
6. Save SHSH files and use Tinyumbrella to uploaded them to my iPhone.
I would really appreciate if someone can help me on this. I might be doing something wrong or maybe not even considering the right steps to solve this issue. I don't know if there are missing drivers that are preventing the device from communicating with iTunes properly. Of some tool that can be used to correct this problem. It may or may not be fixable but I think it is worth the try.
Thanks very much.

please ignore the comment about coffee. Someone posted a very similar question apart from he spilt coffee on his phone, I didn't.

Odata error: Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view

I have created scripted calculation view
I can add parameter in aforesaid calculation view
It fetches me right result
But when I am to call aforesaid calculation view from odata service I am getting following error:
ERROR      zcustsearch/services/AutoComplete.xsodata
           Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
Any solutions

Don't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object. This means no schema and use package path::view name. Like this example from the SHINE content:
service namespace "sap.hana.democontent.epmNext" {
   "sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
    as "salesYear"
keys generate local "ID"
    aggregates always
    parameters via entity "InputParams";

Need Syntax definition / explanation for pop-up blocker - apparently wildcards are not required, but this isn't specified.

http://support.mozilla.com/en-US/kb/Pop-up%20blocker/discuss/1876
This question has been asked, but was rejected unanswered.
The response states that you must add the full url. It would be more useful to state that you need the base url only, which will then take out any subdomains etc.
http://superuser.com/questions/10760/firefox-popup-blocker-filtering-exceptions
The article above explains in nicely.
I"m writing a desktop checklist for 5000 end users of an online homelessness data collection program, and I need to add our site to their exception list.
I interpreted the instructions to list the URL of every site on the domain. I thought this was unlikely, so kept searching. To the letter, the instructions suggest you enter:<br />
<br />
www.mysite.com
www.mysite.com/help
www.mysite.com/home
www.mysite.com/faq
etc etc
instead of www.mysite.com
Thanks!
Liz

You can only make an exception for a domain and a sub domain (mysite.com www.mysite.com) and not for subdirectories on a domain (www.mysite.com/help -> www.mysite.com)

One of the computers on my homesharing network is automatically downloading purchases even though settings are not checked for this to occur? What am I missing here? BTW only one of the three computers (pc) is doing this.

We have three computers (two pcs and one mac) on our home sharing network. When I buy a song on my pc it is automatically downloading it to my husband's pc - but not my daugher's mac. The settings on each library do not indicate any items should automatically download. What am I missing here? This is a relatively recent thing I just noticed. It was not always happening in this way. Help. Both pcs are on Windows 7. Thanks in advance for any help. My husband and I don't always like the same songs so I need help to get back to marital bliss....

I think I found the answer to my own problemin case anyone experienced the same thing. There is a separate spot in itunes under preferences to allow for automatic downloads from other devices. It seems unrelated to home sharing. I unchecked the boxes under the "store" section and that appears to have taken care of the issue.

Mapping Error: Mappings are not required for this Integrator

Similar Messages

Maybe you are looking for