Mapping execution hangs after 10.1.0.4 upgrade

Hi,
The following has been upgraded :- OWB from 10.1.0.2 to 10.1.0.4, Workflow from 2.6.2 to 2.6.4 and DB from 9.0.2 to 10.2. After all this I had problems executing process flows, I re-registered the location for these and re-deployed the pf;pws and they execute now. I cannot execute mappings directly until I re-deploy them. I have hundreds of mappings, they seem to be okay being run by pflows but I am not sure if some get run by themselves , in which case it looks like they will fail if they are not deployed. Has anyone come across this behaviour after the 10.1..0.4 upgrade, is it normal to have to re-deploy all mappings and pflows after upgrade ??
Thanks for any assistance !
Cheers,
Brandon

Thanks Borkur, I may do the same here, problem with my repository is that some mappings fail when trying to re-deploy but the current pl/sql in the target is executing fine so I will have to fix the deployment errors before I can deploy these (db links arent being added to the remote objects). Was hoping not to have to re-deploy all the mappings but I agree may be best to be safe.
Cheers,
Brandon

Similar Messages

Mapping Execution hangs...

Hi,
When I execute a single mapping (load_table_name) from the deployment manager it hangs. However, the data appears to get loaded. I try to cancel the execution window but that freezes all owb windows (deployment manager and owb projects window). Then I have to kill the owb application from the tasks manager.
I'm using owb client on windows2K to access the repositories/instances on oracle 9.2 on aix box.
Your help would be appreciated,
Bechir

Igor,
The mapping is configured as parallel. It uses APPEND PARALLEL(TARGET_TABLE_NAME, DEFAULT, DEFAULT) as a loading hint for the target table.
The mapping is used for initial load of data from source to target. It uses INSERT as the loading_type. I should add that the mapping execution does not fail, it loads the data successfully. However, the execution window doesn't close after the load is complete. It freezes all open owb windows.
Thanks,
Bechir

Load Plan parallel execution hanged after data warning

We are having 9 scenarios executing in parallel in a Load plan. Whenever we get data quality warning for certain interface, the error data get written to E$ table, and execution of this scenarios get completed with warning yellow sign. But after this scenario next scenario didn't execute and LP remain in the running mode.
But when I break the parallel steps in a group of 2 scenarios, it run fine and completed all the steps even after warnings.
Does this means it depend on Agent setting, as currently we have only one agent setup on weblogic server.
Thanks
Sanjeet Singh
Edited by: 963648 on Oct 7, 2012 2:36 AM

There was Oracle bug "Bug 13324950 : LOAD PLAN EXECUTION REMAINS IN RUNNING STAT WHEN ONE PARALLEL SCEN TRACKS ERRORS"
Patch 14550964: LOAD WHEN USING THE ODI LOAD PLAN, THE LOADING STOPS WHEN THERE IS A WARNING to fix the issue.Pls note when you search this patch in the system, it will return two patches for 11.1.1.5 and 11.1.1.6.3 receptively. Pls choose the right version.

Apache Hangs after 1.0.2.1 upgrade

I've upgraded to iAS 1.0.2.1 from 1.0.2 on NT. The apache listener comes up okay on startup. When I try to access a portal configuration though the browser just hangs until it times out. There is no error message returned to me. This behavior exists when trying to connect to a portal 3.0.7 install that worked under the old 1.0.2 install as well as a fresh 3.0.8 portal install that I created with the new Portal Configuration Wizard.
The behavior is such that when I try to access the portal page the disk drive cranks and the CPU spikes for about 5 seconds and then it just sits there. If the database is not running I get an error message so the inital call is probably making some sort of DB contact, however no Portal Homepage. Any suggestions are very welcome.null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Rinebold ([email protected]):
I just upgraded from 1.0.2.0 and have the same issue. So I uninstalled the 1.0.2.0 instance and did a fresh install and it still hangs trying to get to the public home page. All of the config pages work ok.
What is up with this?
msr<HR></BLOCKQUOTE>
I logged a tar with Oracle support and it turned out my problem was with duplicate entries in the zone.properties file. Here is the fix from Oracle Support.
I see serveral duplicate entries in the zone.properties. The following are the lines that have duplicates. Check to see if I missed any and then remove the duplicates. After that bounce the http listener.
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\Parallel.jar
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\ChartServlet.jar
repositories=D:\Oracle\iSuites\Apache\Jserv\servlets\AppLoader.jar
servlet.page.code=oracle.webdb.page.ParallelServlet
servlet.chart.code=oracle.webdb.chart.ChartServlet
servlet.apploader.code=oracle.webdb.apploader.AppLoaderServlet
servlet.ojsp.code=oracle.jsp.JspServlet
null

Ovi Maps work, then hang after a period of time

Hi,
When I use Ovi maps for navigation, I am able to set up my route, but then after a period of say 10 or 15 minutes, the application hangs and the screen freezes on the last know location.
I then have to exit out of the app, either by resetting the phone or sometimes just exiting.
I am then able to set up my route, where again after 10 mins or so it freezes
I have the latest firmware that is available in the phone, 21.0.004
The version of maps I am using is V3.04
I have performed several full factory / system resets, ie where I setup the country and time
I have no third party apps installed
I do also notice that quite often the email app does not always automatically push emails to me device, so I again have to turn it off and then back on for it to pick up my emails.
So I think in summary my device keeps half hanging, if that is possible
Anyone have any ideas what I can do before taking the device to my local Nokia service centre?
Thanks.
Solved!
Go to Solution.

ok, I now have a fix,
Not that anyone was able to assist, but it may help some one in the future.
I spoke to T-mobile and explained that Ovi maps works when the phone network connection is switched off, but hangs after about 10mins, when the network connection is switched on.
The guy from T-Mobile then went on to say that there are a choice of two configurations that can be applied to my account, that control picture messaging (Yes I did say picture messaging) He went on to say that he would swap me to the alternative method for picture messaging.
I assume that picture messaging just controls the down and upload of data, so impacts the data throughput.
Anyway, he changed my setting on the account, and to my amazement when I went and tested out on the road Ovi maps no longer hung, and now works very well!
My biggest shock was that T-Mobile sorted this all out for me in 10 mins! althought it has taken me many months of testing and trying different things
Cheers

Sequence hangs after LabWindows/CVI DLL execution

Hi there, I've written a DLL in LabWindows/CVI that I loaded and executed it successfully in TestStand, with the LabWindows/CVI adapter.
The weird thing is that, when the adapter is configured to debug DLL code with an external instance of LabWindows/CVI, the sequence just hangs after the DLL finishs executing its code.
If I turn off external LabWindows/CVI debugging, in the adapter configuration, it doesn't hang but other strange errors occur, even crashing TestStand!
I reviewed my DLL source code and I didn't find anything problematic. Is it possible that the DLL is overwriting a reserved memory region, thus breaking TestStand functionality? Have you ever seen that?
Thank you very much.

Yes it's possible that the call is corrupting memory. The most likely way for that to happen is if the prototype specified in TestStand does not match what actually exists in the dll, or if you write more bytes to an array passed in from teststand than the step is specified to be passing from TestStand. Double-check that your prototypes match and that you aren't writing past the end of any buffers or accessing any pointers incorrectly.
Hope this helps,
-Doug

Lenovo T61 (Product 6458-W2R): explorer.exe hangs after logon - WinXP SP2

+++ english below +++
[german/deutsch]
Wir setzen in unserem Unternehmen mehrere ThinkPad T61 ein. Bei einigen dieser ThinkPad T61 (und nur beim ThinkPad T61!) haben wir inzwischen ein seltsames Phänomen, welches im Laufe der letzten 1-2 Monate auftrat und noch auftritt. Dieses Phänomen trat nicht gleichzeitig auf, sondern nacheinander. Und es tritt willkürlich auf. Der jüngste Fall ist gerade 1 Tag alt. Inzwischen sind 6 ThinkPad T61 davon betroffen.
Alle ThinkPad T61 sind Mitglieder einer Domäne (Windows Server 2003) und durchlaufen ein Loginscript. Das Loginscript beinhaltet Batchbefehle, Kix32 (für das Mappen von Netzwerklaufwerken und Druckern) und Teile der Matrix42 Empirum Management Software (für Softwaredistribution und Inventarisierung). Es werden Gruppenrichtlinien angewendet. Es werden via Matrix42 Empirum automatisch die neuen Patches und Updates seitens Microsoft auf alle Computer verteilt. Alle Computer erhalten eine unbeaufsichtigte/standardisierte Installation via Matrix42 Empirum Management Software (ähnlich einem Image und der unbeaufsichtigten Windows-Installation). Auf allen Rechnern ist Windows XP mit Service Pack 2 installiert. Spezielle Software ist in der Regel nicht drauf, nur Microsoft Office 2003, der aktuelle Acrobat Reader sowie die aktuellen Standardplayer: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Ggf. noch Nero 7 Standard bzw. Platinum (Spezielle Version). Alle IBM/Lenovo ThinkPad verwenden zusätzlich die IBM/Lenovo-Utilities „ThinkVantage“. Das Phänomen tritt unabhängig davon auf, ob das ThinkPad T61 in einer Dockingstation betrieben wird oder nicht. Es ist auf jedem Computer in der Windows Registrierung eingestellt, dass der Desktop erst geladen wird, wenn das Loginscript durchgelaufen ist.
Nun zur genauen Fehlerbeschreibung:
Manchmal kann es bei einem Kaltstart vorkommen, dass nach der Anmeldung und nach dem Loginscript –während der komplette Desktop und die Startleiste bereits sichtbar sind und noch einige Dienste geladen werden– sich die explorer.exe aufhängt. Die Startleiste lässt sich nicht bedienen. Ebenfalls lassen sich dann auch auf dem Desktop keine Symbole doppelklicken.
Wir setzen auch andere Computer ein, wo dieses Phänomen nicht auftritt, u.a.:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Das Problem tritt nur auf den noch relativ neuen ThinkPad T61 auf.
Wir haben bereits einen ziemlich ähnlichen Fall unter…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html …gefunden.
[english]
Unfortunately, I’m not fluent in the english language.
We use a few ThinkPad T61’s in our company. Meanwhile, at some ThinkPad T61’s (only ThinkPad T61!) we have a strange problem. This problem appears since the last 1-2 months and it still does exist. This problem does not appear at the same time, it does appear successive. And it appears random. The last case is 1 day old. Meanwhile, 6 ThinkPad T61 are concerned.
All ThinkPad T61 are members of a domain (Windows Server 2003) and do execute a logon script. The logon script contains Batch commands, Kix32 (for mapping network drives and printers) and parts of the Matrix42 Empirum Management software (for software distribution and inventory scan). Group policies will apply. Patches and updates will install on every computer via Matrix42 Empirum automatically. All computers get a default/unattended installation via Matrix42 Empirum Management software (everywhere between an image and an unattended Windows installation). All computers have installed Windows XP with Service Pack 2. As a rule, special software isn’t installed, only Microsoft Office 2003, the actual Acrobat Reader and the actual default players: Windows Media Player, Quicktime Player, RealPlayer, VLC media player. Sometimes, there is installed the Nero 7 Standard or rather Platinum (Special Edition) yet. All IBM/Lenovo ThinkPad use IBM/Lenovo-Utilities „ThinkVantage“ additionally. The problem exists if the ThinkPad T61 is connected to a docking station and also if the ThinkPad T61 is disconnected from a docking station. On every computer exists a registry key which arranges it that the desktop only will be loaded after the logon script did run.
Now the detailed error description:
Sometimes the explorer.exe hangs after the cold start. i.e.: The desktop (with icons and task bar) appears complete. But the computer hangs if you try to click on the task bar or double click on any icons. The computer will only run if we kill the process ‘explorer.exe’ and if we restart the explorer.exe.
We use also other computers with the same installation and the same group policies where the problem does not exist, for example:
- HP-Computer (Desktops, Evo SFF Series)
- Fujitsu-Siemens-Computer (Desktops, ESPRIMO E Series)
- IBM ThinkPad T20/21
- IBM ThinkPad T40/T41/T42
- IBM/Lenovo ThinkPad T60
Only the new ThinkPad T61’s have this problem.
We have found a similar case at…
http://forums.techarena.in/showthread.php?t=694888&page=1
http://forums.techarena.in/showthread.php?t=694888&page=2
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/XP/Q_22718276.html
Vielen Dank / Many thanks!

I would run System Update and make sure I had all the updates available.
Another thing to try is:
1. Right-click on My Computer and click Properties
2. Click on the Advanced tab
3. Click on Settings under Performance
4. Click on Data Execution Prevention
5. Click on Turn on DEP for all programs and services except those I select, then check Windows Explorer
We had to do that to some machines here after a push from corporate of the new ScriptLogic.This solved the problem.
ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
Windows 7 Enterprise and Windows XP Pro

How to measure mapping execution speed

Hi,
currently i'm trying to measure performance differences between Interface Mappings which contain one single Message Mapping and Interface Mappings which contain 2 or 3 Message Mappings.
I already tried to do this with RWB and Performance-Monitoring. But Performance Monitoring shows the processing time through the whole XI, and not only Mapping execution time. So it is difficult to get a clean measuring there, without influences from queueing and so on.
Test Tab on Integration Builder has a too big step (one second). Mapping execution time is slower.
Do you have any ideas to measure this?
Or do you have experience with performance differences between those two kinds of Interface Mappings?
regards,
ms
P.S. i'm using XI 3.0

Hi, Manuel:
For the two scenarios you want to compare performance, trigger them separately.
You take following steps to take measurement for those two scenarios:
Go to SXMB_MONI, find the message, go to pipeline step after your "Request Message Mapping"
e.g. you can select "Technical Routing" step, expand it, -> SOAP Header -> Performance Header:
You will see the start time stamp for each steps executed up to current step.
Locate your mapping programs, get the begin time stamp and end time stamp, then you will know the how long the mapping program take.
For the scenario that you have several mapping programs, make sure you get begin timestamp for the first mapping program and end timestamp for last mapping program, the difference is the time for you few mapping program take.
Hope this helps.
Liang
Edited by: Liang Ji on Mar 29, 2008 5:42 AM

Test Execution hangs while executing a test from Command prompt option

I have done the following
1) Created a script Test driver
2) Added different scripts as Script->Properties->Assets to the driver script
3) Call each of this asset script from TestDriver using command getScript("<<ScrptName>>".run(1, true, true, true);
4) Now calling this TestDriver script from command prompt with command
e:\\OracleATS\\agent
runScript.bat E:\\INTEGRATION_SERVICES\\Identity_management\\Automation\\Scripts\\MasterScripts\\TestDriver
TestDriver.jwg
The script execution hangs at "Initializing VU 1 for Script TestDriver. After few mintues of seeing this message i get error "Execution Timed Out".
Do I need to keep openscript UI open for script execution from command line ?
Is there any way to increase this Execution Time out ? May be it is taking time to load the internal script assets. AS other scripts are running fine on the same machine from command prompt itself.
Complete error is as follows
C:\Documents and Settings\oracle>e:\\OracleATS\\agent\\runScript.bat E:\\INTEGRATION_SERVICES\\Identity_management\\Automation\\Scripts\\MasterScripts\\TestDriv
er\\TestDriver.jwg
Running "TestDriver" ...
Agent started. Available commands:
stop - Stop the virtual user after it finishes the current iteration.
abort - Abort the virtual user cleanly, before it finishes the current itera
tion.
exit - Terminate the process immediately
You may type the above commands at any time.
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.utilities.api.UtilitiesService"
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.browser.api.BrowserService"
12:17:53,418 INFO [1] Initialized script service "oracle.oats.scripting.modules.functionalTest.api.FunctionalTestService"
12:17:53,465 INFO [1] Initialized script service "oracle.oats.scripting.modules.webdom.api.WebDomService"
12:17:53,856 INFO [1] Initialized script service "oracle.oats.scripting.modules.datatable.api.DataTableService"
12:17:53,856 INFO [1] Initializing VU 1 for script TestDriver
Execution Timed Out.

Hi e_raja_sekar,
You wrote:
public static void main(String args){should be
public static void main(String args[]){Granted, the below code was tested on Windows XP using J2SE SDK 1.4.1_02 (and not 1.2.2 like Sridhar is using), but when I compiled and executed this code:
public class BadMain {
public static void main(String args) {
System.out.println("Hello World");
}The output I got was:
Exception in thread "main" java.lang.NoSuchMethodError: mainSo I don't think this is Sridhar's problem (but I could be wrong) since he says that he gets no error message.
Cheers,
Avi.

Queries on oracle hang after index creation

Hi,
I have a problem where queries issued on an oracle database hang after I create indexes on some of the tables used by these queries.
I have a script where I drop indexes :
DROP INDEX EVP_PCON00_CDSITC_IX;
DROP INDEX EVP_PCS202_STIMP1_IX;
DROP INDEX EVP_PECT00_ONAECT_IX;
DROP INDEX EVP_PVAL01_ONAVAL_IX;
After this script I load data into those tables.
Then I launch another script where I recreate the indexes I just dropped :
CREATE INDEX EVP_PCON00_CDSITC_IX ON EVP_PCON00(CDSITC) TABLESPACE TS_ODS_INDEX;
COMMIT;
CREATE INDEX EVP_PCS202_STIMP1_IX ON EVP_PCS202(STIMP1) TABLESPACE TS_ODS_INDEX;
COMMIT;
CREATE INDEX EVP_PVAL01_CDORIV_IX ON EVP_PVAL01(CDORIV) TABLESPACE TS_ODS_INDEX;
COMMIT;
When the script ends, I try to execute a query using some of the tables I created indexes on :
SELECT ...
FROM ....
WHERE ....
The query never return a result set, it just hangs, I look at the session browser in toad and the scan of the first table used in the query hangs.
When I drop those indexes and re execute the query everything works fine.
Thanks
Edited by: 946359 on Jul 13, 2012 9:20 AM

This is the result I get :
Execution Plan
Plan hash value: 1198043594
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1343 | 12 (17)| 00:00:01 |
| 1 | HASH UNIQUE | | 1 | 1343 | 12 (17)| 00:00:01 |
|* 2 | HASH JOIN OUTER | | 1 | 1343 | 11 (10)| 00:00:01 |
| 3 | NESTED LOOPS OUTER | | 1 | 1257 | 9 (12)| 00:00:01 |
| 4 | NESTED LOOPS OUTER | | 1 | 1033 | 8 (13)| 00:00:01 |
| 5 | NESTED LOOPS OUTER | | 1 | 809 | 7 (15)| 00:00:01 |
|* 6 | HASH JOIN | | 1 | 585 | 6 (17)| 00:00:01 |
| 7 | NESTED LOOPS | | | | | |
| 8 | NESTED LOOPS | | 1 | 490 | 3 (0)| 00:00:01 |
| 9 | TABLE ACCESS FULL | EVP_PTIP00 | 1 | 452 | 2 (0)| 00:00:01 |
|* 10 | INDEX RANGE SCAN | EVP_PTIC00_CDROLE_IX | 1 | | 1 (0)| 00:00:01 |
|* 11 | TABLE ACCESS BY INDEX ROWID| EVP_PTIC00 | 1 | 38 | 1 (0)| 00:00:01 |
| 12 | TABLE ACCESS FULL | EVP_PTIF00 | 1 | 95 | 2 (0)| 00:00:01 |
|* 13 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 14 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | EVP_PTAB00 | 1 | 224 | 1 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | EVP_PTAB00_CLTABL_IX | 1 | | 1 (0)| 00:00:01 |
| 19 | TABLE ACCESS FULL | EVP_PRIB00 | 1 | 86 | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("EVP_PRIB00"."NOTIER"(+)="EVP_PTIP00"."NOTIER")
6 - access("EVP_PTIF00"."NOTIER"="EVP_PTIP00"."NOTIER")
10 - access("EVP_PTIC00"."CDROLE"='EMP')
11 - filter("EVP_PTIC00"."CDDDRX"='CL' AND "EVP_PTIP00"."NOTIER"="EVP_PTIC00"."NOTIER")
13 - filter("EVP_PTAB00_SITF"."CDTABL"(+)="EVP_PTIP00"."CDSITF")
14 - access("EVP_PTAB00_SITF"."CLTABL"(+)='SITF')
15 - filter("EVP_PTAB00_TITR"."CDTABL"(+)="EVP_PTIP00"."CDTITR")
16 - access("EVP_PTAB00_TITR"."CLTABL"(+)='TITR')
17 - filter("EVP_PTAB00_RMAT"."CDTABL"(+)="EVP_PTIP00"."CDRMAT")
18 - access("EVP_PTAB00_RMAT"."CLTABL"(+)='RMAT')

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

OWB Performance issue (mapping execution always takes min 60 sec)

Hi All,
any owb mapping we execute in one of our environment , it seems the execution hangs for some time before it build the Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL' statement. The log file shows a constant difference of 30 sec. before executing the <map>.main() function. the data extraction is very low some thing like 10-1000 records
Action taken : increase the SGA pool size to allow more resource. at the DB level
changed the -Xms64M -Xmx256M to -Xms335M -Xmx440M.
But no help
Extraction from the owb log is as follows.
2006/03/15-09:29:09-WST [1E0BF3BF] Initializing execution for auditId= 28339 parentAuditId= null topLevelAuditId=28339 taskName=XXIF_OUT_CSV_TRANS
2006/03/15-09:29:09-WST [1E0BF3BF] Attempting to create adapter 'class.RuntimePlatform.0.NativeExecution'
2006/03/15-09:29:09-WST [1E0BF3BF] Attempting to create native operator 'class.RuntimePlatform.0.NativeExecution.PLSQL'
2006/03/15-09:29:39-WST [1E0D73BF] PLSQL callspec: declare l_env wb_rt_mapaudit.wb_rt_name_values; l_IN_BATCH_ID null........
Kindly note the difference of 30 sec between create native operator to actual execution of PLSQL code.
The same set of mapping is working fine(5-15secs) in our Dev env. but is taking additional time (kind of 1-3 mins ) in Test env. and the execution of mapping does not go in parallel mode(Is this an expected behaviour ?) and if we have 10 seperate excution of the mapping , it takes 30mins to complete in TEST env. compare to 3mins in DEV env.
The noticible difference between these two env. is
These mapping been created using 10.1.0.2.0 client and deployed on 10.1.0.1.0 repository. in DEV env.
but the TEST Env. uses 10.1.0.4.0 repository.
When check the audit browser .. Can see the total elapse time is 61sec but the actual mapping exec time is only 1 sec.
Is there any configuration settings which cause this delay.
Any pointers on this will be of great help.
Regards,
njain

I am having exactly the same issue as you have described here. i.e. my mappings are taking some time to initialize before they run. Did you or anyone find a solution to this problem?

Deployment hangs after importing metadata OWB 10gR2

Hi folks,
in development I created a new mapping with I exported/imported into test enviroment.
I did this using "import all objects, update metadata, match by UID".
When I try to deploy the imported mapping ControlCenter hangs showing the green arrow.
In the DOS box where I started the client it says:
</OBJECT>
</OBJECT>
</OBJECT>
</NAMESPACE>
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] DeploymentUtils.isAda
pterFCO(WBGeneratedObject): Not found objectTypeName CMPMap defaulting to FCO
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] DeploymentSpecificati
onImpl.addToUnitSpecificationImplArrayList: created UnitSpecification for Deploy
mentAdapterName DDLDeployment StoreUOID= 9B7415EC7AB94F54824DF5F57D502828 Action
= 1 FCO list= M_FUNDSTRUCT_DWH,
Runtime Parameters for : M_FUNDSTRUCT_DWH
SYSTEM: DEFAULT_OPERATING_MODE: SET_BASED_FAIL_OVER_TO_ROW_BASED
SYSTEM: DEFAULT_AUDIT_LEVEL: ERROR_DETAILS
SYSTEM: MAXIMUM_NUMBER_OF_ERRORS: 50
SYSTEM: COMMIT_FREQUENCY: 1000
SYSTEM: BULK_SIZE: 1000
SYSTEM: DEFAULT_PURGE_GROUP: WB
SYSTEM: ANALYZE_TABLE_SAMPLE_PERCENTAGE: 5
RUNTIME_SERVICES_DEBUG [WhValidationGenerationTransaction] ExecutionUtils.decode
SystemParameter: Unexpected parameter ANALYZE_TABLE_SAMPLE_PERCENTAGE
Notification (Unit): start VEVA_LOCATION (Erstellen) - 0 (Adapter=DDLDeployment
Location=VEVA_LOCATION)
MEM:GenerationValidationService:internalCompile:after transaction:U: 65237816%IN
CR:2538296:INCREASE
What is the problem?
Michael

The error is due to the corrupted MDL file. MDL is getting corrupted because there is not enough memory for java VM. To fix the MDL corruption increase memory parameters.
1. On client PC: XXXX\owb\bin\win32\owbclient.bat change
java -Xms64M -Xmx768M -Dlimit=768M -XX:MaxPermSize=256M
to
java -Xms64M -Xmx1024M -Dlimit=1024M -XX:MaxPermSize=512M
Restart client session.
It did fix the problem in my case.
Oracle also recommends changing memory parameters on the server side (UNIX in my case)
2.On server side XXXX/owb/bin/unix/run_service.sh
$JAVAPATH/bin/java -Xmx768M
to
$JAVAPATH/bin/java -Xmx1024M

How to get last date of mapping execution?

Hi all,
Anybody knows how to get the last run date mapping? I try to develop incremental load, but i don´t know get the last date of mapping execution ok.
anybody can help me, thanks in advanced

Hi,
In our project we also use last_run_date to detect the delta for incremental loading.
We created a table which holds the run date and time for each mapping. When a mapping is new (initial load) the run date is set to 01/01/1900.
In each mapping we added a post-mapping process that inserts a record in the process table with the mapping name and last run date.
We also added a Constant operator to all mappings, calling a procedure to get the last_run_date out of our own process table.
The constant attribute is then used in a FILTER operator to compare the dates and select only dates after the last run date.
==============================
An other option is to use the get this information out of the runtime audit tables.
ALL_RT_AUDIT_EXECUTIONS which reside in the runtime owner schema.
Regards,
Ilona

W520 - BIOS update (8buj19uc.iso) hangs after PXE booting

After PXE booting the latest 1.40 BIOS bootable CD,
the system hangs after pressing "2. Update system program"
Here my setup:
LABEL w520bios
MENU LABEL ^w. BIOS V1.40 W520 - 32bit - Normal    - ISO - (EN)
TEXT HELP
* Boot the W520 BIOS ISO image over PXE
ENDTEXT
LINUX memdisk
INITRD ../isos/bios/w520/8buj19uc.iso
APPEND iso raw
I need this feature, because we have several thinkpads to update!
Any help regard this topic is greatly appreciated

I had no clue what PXE is, so I looked it up:
The Preboot eXecution Environment (PXE, also known as Pre-Execution Environment; sometimes pronounced "pixie") is an environment to bootcomputers using a network interface independently of data storage devices (like hard disks) or installed operating systems.
http://en.wikipedia.org/wiki/Preboot_Execution_Environment
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

Mapping execution hangs after 10.1.0.4 upgrade

Similar Messages

Maybe you are looking for