Mapping for ND_FORM to ND_FORM not possible due to recursion

Hi Experts,
I am trying to define external context mapping...with the steps..say there are two components ZOMP1(in which i am using other component) and ZCOMP2(this is used in zcomp1)
1. IN the component zcomp2 I define ZCOMP1 under the used components
2.in the component controller of ZCOMP2 under properties tab I create controller usage of zcomp1 and two entries are created
3.I go to the context tab of component controller of zcomp2 and drag and drop the ND_FORM node from ZCOMP1 to context node of ZCOMP2
when I do a check I get the error
Mapping for ND_FORM to ND_FORM not possible due to recursion
Don't understand why am I getting this error though the node I am trying to map is not recursive?
This is what I see in long text of error:
Message no. SWDP_WB_TOOL263
Diagnosis
Mapping from ND_FORM to ND_FORM is not permitted, as ND_FORM has its own mapping that refers directly or indirectly to ND_FORM.
System Response
The mapping can neither be created nor used.
Procedure
If you receive this error message when you check a context or when you update the mapping to context node ND_FORM, delete the mapping to ND_FORM using the context menu function with the same name.
Please help,
Anubhav

Hi Anubhav,
following restrictions apply on recursion nodes:
1. You cannot nominate a recursive node to act as the data source in a context mapping relationship. Recursive node structures are restricted to the scope of a single controller.
2. The root node of a context cannot be used for a recursion.
Please check this...
http://help.sap.com/saphelp_nw04s/helpdata/en/47/45641e80f81962e10000000a114a6b/content.htm
Also Cehck This,..
Enhancement FPM of Trip application
Cheers,
Kris.

Similar Messages

Set Deletion Flag for Process Order is not possible due to status ORRQ

Hi Guys,
I need to mark some process orders for deletion, but the status ORRQ (order record required) is blocking me. I've read some SAP Documentations and SAP Notes and it's recommending run tcode COPA to store the order records. A
Although the Process Order is appearing there to be stored, we I execute store process it gives me a message that "Zero Orders were stored".
So, can you help me on this?
Thanks.
Pérsio Kojima

Hi Pérsio,
Check In Customizing whether the order type has been set up for storing in T code COR4 (order type-dependent parameters, Master data tab page, Order record required indicator).
IF the option is selected, the system will not delete the record directly. The order record must be archieved and then deleted.
based on this either you can de activate the option or archive before deletion.
Hope this answers your question.
regards,
Pradeep.

The first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

the first boot of iphone 5 is not possible due to lack of battery charge , it happened after charging, is there s any issue of battery life

Charge the phone for 15 minutes with the Apple charger. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears.

Purchase requisition from sales document' not possible due to a credit bloc

hi experts,
i have to confirm delivery date and quantity for some purchase order items but i'm not able because i receive following message:
Subsequent function 'Purchase requisition from sales document' not possible due to a credit block'
Purchase requisition belongs to a sales order which has customer 10000.
The customer 10000 was block from FD32 but now i have unblock the customer from FD32, i have assigned customer to a category risk which is only a warning. (in OVA8 risk category 002 static check, reaction C, status/block uncheck )
There is any possiblilities to confirm quantity ?? I mean ... i understand that sales order was created when the customer was block due to credit limit exceded ... but now the customer is not blocked.
What should i do?
Thank you.

Hi Dan
If you want to confirm the delivery date then change the static check reaction to B . in OVA8 . But if you change the static check reaction to A , you can do Delivery and billing also
Regards
Srinath

Error Message: Change of update mode not possible due to open V3 update

Hi Gurus,
I got error message when i change update mode (LBWE) from V3 to Direct or Queued delta method.
Error Message: Change of update mode not possible due to open V3 update
Long text: You are not allowed to change the update mode for application 11 from V3 to another method. This is because there are still V3 update entries for update module MCEX_UPDATE_11 that have not been processed yet.
Pls anyone give solution for this.
Thanks
Muthu

Hi Sreeni,
i did check in all the below Tcode as you adviced.
1. Clear all record at SM13, LBWQ / SMQ1, Setup tables, RSA7 for particular datsasource or application..
2. For LBWQ provide date range and delete not required records.
I did not get the 3rd point " Need to clear in CLINTS of R/3 system" of your reply.
what does that mean?
I checked all the above tcodes and got the same message as no queue or data exists".
I went SBIW tcode and activated my data source and try to change the Update mode but still it is throwing error message as "Change of update is not possible due to open V3"
Please help me out.
It will be very helpful for me if you could share steps or docs regarding this issue.
Thanks,
Shailaja

Why does siri only have business and maps for U.S and not Ausstralia?

why does siri only have business and maps for U.S and not Ausstralia?

what does this mean ?
Beta means it is unfinished, not fully featured and may have bugs.
so is it not possible for siri to tell me the weather, and maps and businesses for Australia?
That's correct. Nor will it do it for me in the UK. As it say's in the Siri FAQ I linked to:
"Maps and local search support will be available in additional countries in 2012."

Good issue from delivery not possible due to credit block

Hi gurus,
Please help me on this issue.while doing PGI for the delivery i am getting the following error message."Good issue from delivery not possible due to credit block "The simple credit check is assigned for the sales document type.iam doing free of charge delivery.
What are all the possible ways to get such error
Regards
Vis

but system behavior is not set in transaction OVA8, means combination of risk categories and 03 is not set.
I think you are checking the wrong risk category, please check once again the Risk category of the payer in FD32, what is it assigned and also check OVA8 with this risk category.
If you find the above settings are correct as per your observation, try to create a fresh cycle so that you will get the correct results as per your settings in delivery.
In your case what you are saying is correct, may be the risk category is changed recently this you can check the change log of the payer customer in FD32( if any change takes place).
If possible try to past the screen shot of both.
thanks,
srinu.

Assigning a new tax key for V0 and VAT not possible

Hi Experts,
Invoice is been created successfully in SUS , XML transfered to XI which in turn created the IDOC in ECC.
I get the below error while transferring theinvoice IDOC from XI to ECC.
Assigning a new tax key for V0 and VAT not possible
Message no. FD008
Diagnosis
In Financial Accounting customizing, the tax ID transferred in the invoice is missing so that the system cannot determine a tax code. The system could not determine an entry with the value V0 nor with the value VAT .
Procedure
In Financial Accounting customizing, include the external tax ID and a corresponding internal tax code for the present partner.
Please let me know if I am missing any setup in ECC as I have already maintained the setup in OBCA, OBCD and OMRY.
Thanks,
-Devi Swain

Hi Devi,
Can you please tell me ,how you resolved this issie,I am getting same error.I I have already maintained the setup in OBCA, OBCD and OMRY.
Thanks,
-Sunil

Account determination for entry CASI DIF not possible.

Hi Friends,
While doing Invoice (MIRO) against PO, I have encountered below error.
IR Error:
Account determination for entry CASI DIF not possible.
Please help to how to resolve.
Warm regds,
Raman,

Hi,
If you click on the message you will get help, it will show you exactly which entry in the auto account assignment table is missing. Note the details (COA valuation area etc.) then at the bottom of the message is a link to take you into the transaction where you can make the appropriate settings (assuming that you have access and this is not your production live system).
CASI may well be yyour chart of accounts and DIF is the transaction event key. The system needs to know which GL to post to in this situation.
Steve B

Message no. M8147 : - Account determination for entry TLRG KDM not possible

Dear Friends,
We encounter with error message M8147:-Account determination for entry TLRG KDM not possible while posting a MIRO entry, here is the brief analysis.
       Goods receipts is posted the following entry with exchange rate 3.81650
                     RM-Paper A/c                 USD 31075.24 and ARS 118598.67
                           GR/IR Clearing           USD 31075.24 and ARS 118598.67
Now while posting MIRO exchange rate is 3.8863, as there is difference exists with GR rate system is trying to identy GL account from transaction key KDM (Materials management exch.rate diffs) but we have not mantained any account there.
Now what I want to understand is that I have seen the cases when there is a exchange rate difference it will be adjusted to Expense A/c in this case it should be RM-Paper A/c but why system is looking for an entry to KDM transaction key.
Please give us an idea why system is behaving is like this and how to achive the funtionality of adjusting the exchange rate difference to expense A/c.

hi all,
I am also facing this error
Account determination for entry ____ GBB ____ BSA 7900 not possible .
The system cannot find account for posting. OBYC i have checked but not getting any solution. Can you suggest something?
Regards,
Diptanshu gupta

Document is in transfer for purchase order.Creation not possible

Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.

Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ

Document in transfer for purchase order - creation not possible

Hi Experts,
we get this error when we do confirmation"'document in transfer for purchase order - creation not possible'"
any inputs are appreciated
Rg
sam

Hi All,
We have resolved the above problem.
When user does confirmation ,if it sucessfully created then there will be no entry in BBP_Document_tab table.If it's in error in process and next time when user tries to do GR then he will encounter a pop up message "Document in transfer for PO, creation not possible".
So we need to delete the entries from table BBP_DOCUMENT_TAB using FM BBP_DELETE_FROM_DOCUMENT_TAB.
Then check again in BBP_DOCUMENT_TAB now there will be noentry there...so now user can do the confirmation from SRM,he will not encounter this error now.
Thanks to all the ppl who has replied
sameer

[SOLVED]wlan0 up - Operation not possible due to RF-kill

Hello everyone.
I've encountered trouble trying to activate my wlan0 interface and I was wishing that someone here might be able to help me.
$ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether
My attempt at trying to activate wlan0 renders the following;
$sudo ip link set wlan0 up
RTNETLINK answers: Operation not possible due to RF-kill
Unblocking everything with RF-Kill does not seem to change much in particular:
$rfkill list all
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: yes
$sudo rfkill unblock all
$rfkill list all
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
Enabling/Disabling the wifi-button on my keyboard only changes the Hard Blocked-parameter of hp-wifi. The Soft block remains unchanged regardless of me trying to unblock all with rfkill.
The following is the output of dmesg | grep phy0
$ dmesg | grep phy0
[ 7.460715] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 7.465387] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[ 7.500363] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
dmesg | grep hp-wifi renders nothing.
Additional Information:
$uname -r
3.12.2-1-ARCH
Entire output of lsmod
Module Size Used by
hid_generic 1161 0
usbhid 40577 0
hid 90678 2 hid_generic,usbhid
arc4 2008 2
rt2800pci 11055 0
rt2800lib 74595 1 rt2800pci
rt2x00pci 2664 1 rt2800pci
rt2x00mmio 2945 1 rt2800pci
rt2x00lib 37807 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio
joydev 9671 0
eeprom_93cx6 2193 1 rt2800pci
mac80211 466554 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 412854 2 mac80211,rt2x00lib
uvcvideo 72900 0
kvm_amd 52575 0
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 28027 1 uvcvideo
kvm 389125 1 kvm_amd
videodev 111140 2 uvcvideo,videobuf2_core
hp_wmi 7627 0
media 11751 2 uvcvideo,videodev
radeon 1284675 6
sparse_keymap 3154 1 hp_wmi
crc_ccitt 1371 1 rt2800lib
rfkill 15651 2 cfg80211,hp_wmi
r8169 58399 0
microcode 15216 0
evdev 10989 13
mii 4035 1 r8169
pcspkr 2035 0
k10temp 3058 0
psmouse 85428 0
ttm 63411 1 radeon
serio_raw 5049 0
rtsx_pci_ms 7266 0
drm_kms_helper 36286 1 radeon
memstick 7472 1 rtsx_pci_ms
drm 238206 8 ttm,drm_kms_helper,radeon
sp5100_tco 5824 0
thermal 8532 0
battery 6837 0
wmi 8419 1 hp_wmi
i2c_piix4 10592 0
snd_hda_codec_realtek 40772 1
i2c_algo_bit 5399 1 radeon
i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
ac 3332 0
acpi_cpufreq 10779 0
video 11228 0
snd_hda_intel 36904 0
shpchp 25465 0
button 4677 0
snd_hda_codec 149633 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
processor 24935 3 acpi_cpufreq
ext4 474187 4
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83504 1 ext4
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30789 6
rtsx_pci_sdmmc 14332 0
mmc_core 95691 1 rtsx_pci_sdmmc
ahci 22896 5
libahci 21401 1 ahci
rtsx_pci 32049 2 rtsx_pci_ms,rtsx_pci_sdmmc
libata 170792 2 ahci,libahci
ehci_pci 4000 0
ohci_pci 4072 0
ohci_hcd 23937 1 ohci_pci
ehci_hcd 59220 1 ehci_pci
usbcore 180136 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
scsi_mod 130669 3 libata,sd_mod,sr_mod
usb_common 1656 1 usbcore
Entire output of lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
It is worth mentioning that this problem has remained persistent throughout multiple linux distributions that I've tried on my laptop. The Wifi works fine in Windows 7 but as soon as I switch to any linux distro it stops working.
I intend to put your advice to good use so any help would be very appreciated.
Last edited by FunkDojo (2013-12-05 13:02:45)

As I can see you have two wireless interaces, when i see only phy0 with rfkill, it's maybe your hp-wifi that force to disable phy0 interace. I think if you blacklist the driver it might allow phy0 to be enabled.
Please download and install lshw available in the community repo and enter in a terminal :
$ lshw -c network
Last edited by maxarsys (2013-12-05 06:26:05)

Add Interface mapping to Receiver Determination is not possible

Hello,
I create some scenarios from R\3 to BW and R\3 to File.
When I want to add Interface mapping to Receiver Determination is not possible.
Not to choose from list and not with copy and paste.
Any ideas?
Regards
Elad

Hi Elad,
Just check whether ur interface mapping that u defined in IR is activated properly or not.It will be present in the hit list as soon as u click the help button of the interface mapping of the interface determination in the ID.
Regards,
Prasanthi.

Issue:Structure explosion for item 000020 is not possible...

Hello all,
i am getting this error when i am creating the sales order.so where i have to do the setting for resolving this issue.
Structure explosion for item 000020 is not possible
Message no. V1578
Diagnosis
You have tried to carry out a structure explosion within an exploded structure, but this is not possible.
For example, the system finds one component and one item category within an exploded BOM that leads to another BOM explosion in document processing. This is not possible because you can only explode a multi- level BOM and the explosion can only start with a document item that has not been generated by the previous explosion.
Similar problems occur when combining BoM explosion and product selection.
System Response
The system does not carry out the lower-level explosion.
Procedure
Configure the settings in Customizing, so that sub-items do not lead to another explosion. It might be that the wrong item category was determined for the sub-item.
Regards
Subrat

Dear G. Lakshmipathi,
my requirement is very simple
i have two levels one is header level material and another is child level material.
the stocks will be at child level
pricing will be at header level
so what will be will be the item catagory group and item catagory for header level item and for the child level item.
please help
Regards
Subrat

Mapping for ND_FORM to ND_FORM not possible due to recursion

Similar Messages

Maybe you are looking for