Mapping in TRCS 0IC_C03
Hi,
In the TRCS of 0IC_C03 not all fields are mapped, like in 2lis_03_um_tr storage location, batch, stock type, gn_vendor are not mapped. although these fields are availble in datasource .... do we required to map these fields as well.
kindly please provide input on this.
thanks
dipika
Dipika
If you are using those fileds then you need to map them obviously
Also u can check in other Datasource like 2LIS_03_BF,2LIS_40_S278 along with 2LIS_40_S278, these fields might have got mapped in other s
Regards
Similar Messages
-
All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR
I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AMHi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL -
TRCS 2LIS_02_ITM to 0PUR_C01 Mapping issue 0INV_RC_QTY/VAL
Dear All ,
I have installed the 0pur_c01 cube and its before and after objects successfully. Loaded the data into standard cube. But there is no data into the 0IV_RC_QTY / VAL ( Invoice QTY / VAL ) infoobjects.
There is no mapping from TRCS 2LIS_02_ITM to 0PUR_C01 Cube.
Can you please help me on this. What to map from source to target cube.
Your help highly appreciated.
Best Regards,
Milind.Hi Milind,
strange.
For me it looks like shown below
Could you try to reinstall this transformation from BI Content?
If still not provided there after reinstall, please let us know the BI Content Release and support package you are using.
Here is the information for the two transformation routines:
0INV_RC_QTY
Source IObj:
- 0BASE_UOM
- 0BWAPPLNM
- 0CPQUAOU
- 0DENOMINTR
- 0NUMERATOR
- 0PO_UNIT
- 0PROCESSKEY
Aggregation: Summation
Routine (unfortunately only in 3.x non ABAP-OO style, you would need to adapt it to 7.x ABAP OO):
* fill the internal table "MONITOR", to make monitor entries
IF ( COMM_STRUCTURE-PROCESSKEY = '023' or
COMM_STRUCTURE-PROCESSKEY = '003' )
AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
AND COMM_STRUCTURE-CPQUAOU <> 0.
perFORM QUANTITY_CONVERT
USING COMM_STRUCTURE-CPQUAOU
COMM_STRUCTURE-po_UNIT
COMM_STRUCTURE-base_uom
COMM_STRUCTURE-numerator
COMM_STRUCTURE-denomintr
CHANGING RESULT.
* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
else.
RETURNCODE = 4.
endif.
* if abort is not equal zero, the update process will be canceled
ABORT = 0.
0INV_RC_VAL
Source IObj:
- 0BWAPPLNM
- 0CPPVLC
- 0LOC_CURRCY
- 0PROCESSKEY
Aggregation: Summation
Routine (unfortunately only in 3.x non ABAP-OO style, you would need to adapt it to 7.x ABAP OO coding):
* fill the internal table "MONITOR", to make monitor entries
IF ( COMM_STRUCTURE-PROCESSKEY = '023' or
COMM_STRUCTURE-PROCESSKEY = '003' )
AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
AND COMM_STRUCTURE-CPPVLC <> 0.
RESULT = COMM_STRUCTURE-CPPVLC.
* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
else.
RETURNCODE = 4.
endif.
* if abort is not equal zero, the update process will be canceled
ABORT = 0.
Regards,
Andreas -
TRCS 2LIS_03_BF_TR - CUBE 0IC_C03
Hi Gurus
TI am unable to solve the routine for RCS 2LIS_03_BF_TR -> CUBE 0IC_C03. It is giving me the following error.
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
I have almost tried all options available on SDN. Any better solution.
Thanking You,
Regards
MoHi Muhammad Ali,
we are facing same issue, most of the keyfigures in transformations are not mapped from infosource to transformations.
can you please share transformations with routines.
thanks in advance
Regards
Raj. -
BI 7 Inventory Transformations 0IC_C03
Hi,
any body implemented Inventory managment in BI 7 flow.
we are implemenating Inventory managment in BI 7 flow. issue is when installling transformations most of the keyfigures are not mapped, do we have to map/ write rouitnes, content will not give rouitnes for keyfigures.
transformations for 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM.
can any one please help on this. transformations with routines are much helpful.
Regards
RajRaj,
Check note: [Note 1073268 - SAP Best Practices for BI V2.70|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1073268]
BI Scenario Inventory Analysis
Symptom:
You have activated InfoCube 0IC_C03 in dataflow before. The dataflow is available from the InfoCube downwards to the InfoSources in 7.0 technology (transformations). However there is no connection between the InfoSources and the DataSources, because all DataSources have been activated as 3.x DataSources.
Reason:
The Business Content for the InfoCube 0IC_C03 has changed and now uses the 7.0 technology for data flow.
Solution:
1. Migrate the follwing DataSources to 7.0 DataSources:
2LIS_03_BX
2LIS_03_BF
2LIS_03_UM
In transaction RSDS enter the relevant DataSource and the source system. From the menu choose DataSource -> Migration 3.x DataSource -> DataSource.
2. Reactivate the InfoCube 0IC_C03 in dataflow before.
3. Check the transformation TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03. If it is not active, check if there is an error in the start routine. If this is the case, refer to SAPNote 1052648, section "Start Routine" for a solution.
Srini -
Hi Friends,
i am on 703 BI content, than when i activated the 0ic_c03 infocube I observed that in transformation 2lis_03_bf mapping is missing, target field should is not mapped with source field, in earlier version of bi content target fields is gettinc caluclated by some routine and secondly start routine of 2lis_03_bf have syntax error, same with 2lis_03_bx and um transformation.
so we upgraded to BI conetent 704 with patch 0001 than i reactivated the 0ic_c03 cube but though problem is same.
so, we are now planning to upgrade support patch 0003 for BI content 704, will support patch 0003 for BI content 704 solve the problem or anyother thing required to do with current status of BI conetent 704 with patch 0001 to solve this issue?
Regards,
dushyant,Hi Colin Moloney ,
we applied the 0003 support pack/patch for the BI content 704 from patch 0001 of BI content 704,
now start routine error of 2lis_03_bf is gone, transformation is comin as active verson once we do reactivation of object from BI content,
But still missing the mapping rules in transformation.
note 1179880 is saying that Import Support Package 3 into your system. is that mean patch 0003 for BI content 704?
note content - "Solution
Implement Note 1171293 in your system. The following procedure depends on the release you are using.
BI_CONT 7.04:
A Support Package that contains all transformations is available for Release BI_CONT 7.04. Import Support Package 3 into your system.
If you install Release 7.04 by upgrading from Release 7.03, only the changed objects (delta) are imported into the system. As a result, transformations may be deleted in the system, and you may only notice this when you activate the new BI Content from Release 7.04. The missing transformations are delivered completely in this Support Package"
now what to do?
regards,
dushyant. -
0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
PrabhakarHi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106 -
0IC_C03 Error in start routine when activating
Hi gurus!
I have a SAP NetWeaver BI 7.0 patch level 14 installation with business content SAPKIBIIP6 and BASIS patch level 12
When activating infocube 0IC_C03, the transformation have a start routine that throws the following error:
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
The transformation is TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03
What could be the problem?
ThanksProblem solved!!!
Verify if the type tys_SC_1_full have exactly the same fields as the type tys_SC_1; if not, copy the tys_SC_1 fields to tys_SC_1_full.
Regards!! -
MAP and Total stock in 1 report
Hi,
For one of the reporting requirement i need to show Moving average Price & Total stock in single report. MAP is saved in cube 0COPC_C04 and Stock in cube 0IC_C03.
So i created a multiprovider on them. My report layout is bel;ow
Material Plant Storage location MAP total stock
Issue is that MAP is stored only at MAterial level and Plant level but not at storage location level.
and stock is at all level.
I am getting output like this:
Material Plant Storage location MAP total stock
MAT1 PL1 # 10 -
MAT1 PL1 ST1 - 20
MAT1 PL1 ST1 - 30
User wants that MAP is same at different storage locations in a plant so MAP value should be repeated even if its same.
MAT1 PL1 # 10 -
MAT1 PL1 ST1 10 20
MAT1 PL1 ST1 10 30
How can i achieve the same....
Thanks
DipikaYou could create a characteristic hierarchy with Plant as the parent node of storage location.
Or create a structure in the query and define a cell restriction to keep the Plant MAP value against the Storage Location cells. -
Inventory 0IC_C03 Cube Transformations issue BI 7
Hi Experts,
we are Installing Inventory Cube 0IC_C03, with In dataflow options in BI 7, 2LIS_03_BF transformtions is in Active State, while 2LIS_03_BX transformtion and 2LIS_03_UM transformtions are in Active.
and for most of the Keyfields in Cube are not mapped with infosource fields.
can any body implemented Inventory in BI 7 system, any body faced this issue. can you please share how you resolved this issue.
we are on BI Content 703 11 version.
Regards,
RajRaj,
No need to check start routine code for this.
Goto Transformation --> Change mode --> Choose Rule Group (on top of window, middle of the screen) --> Choose 05 --> Dispay mapping --> check routines available or not.
Confirm back are you able to see filed routine or not...!!
Check doc: [Rule Groups in Transformation|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2] -
Help needed Inventory 0IC_C03
Hi guys,
I am presently working on an inventory project.
I have activated the busines content for the whole process flow i.e the cube 0IC_C03 and its respective datasources and infosources.
Now I want to understand the logic thst is being used in the start and update routines.Is there any doc that gives the logic for these routines.
For example a KF 0ISSVALSCRP which exists in the cube 0IC_C03 is mapped from its infosource using the rulename Issue Qty: Scrap - Purch.Val. from Matl Doc. on Posting Date.
The routine used is 'Perform routine_0030'.
which is
IF ( COMM_STRUCTURE-movetype EQ '551' "GI scrapping
OR COMM_STRUCTURE-movetype EQ '552' "GI scrapping
OR COMM_STRUCTURE-movetype EQ '553' "GI scrapping QI
OR COMM_STRUCTURE-movetype EQ '554' "GI scrapping QI
OR COMM_STRUCTURE-movetype EQ '555' "GI scrapping blocked
OR COMM_STRUCTURE-movetype EQ '556' ) "GI scrapping blocked
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
AND COMM_STRUCTURE-cppvlc <> 0 .
Could somebody tell me the logic implemented in this piece of code.Is there any document for the same.
Points will be assigned.
Thanks
AnkitHi guys,
I am presently working on an inventory project.
I have activated the busines content for the whole process flow i.e the cube 0IC_C03 and its respective datasources and infosources.
Now I want to understand the logic thst is being used in the start and update routines.Is there any doc that gives the logic for these routines.
For example a KF 0ISSVALSCRP which exists in the cube 0IC_C03 is mapped from its infosource using the rulename Issue Qty: Scrap - Purch.Val. from Matl Doc. on Posting Date.
The routine used is 'Perform routine_0030'.
which is
IF ( COMM_STRUCTURE-movetype EQ '551' "GI scrapping
OR COMM_STRUCTURE-movetype EQ '552' "GI scrapping
OR COMM_STRUCTURE-movetype EQ '553' "GI scrapping QI
OR COMM_STRUCTURE-movetype EQ '554' "GI scrapping QI
OR COMM_STRUCTURE-movetype EQ '555' "GI scrapping blocked
OR COMM_STRUCTURE-movetype EQ '556' ) "GI scrapping blocked
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
AND COMM_STRUCTURE-cppvlc <> 0 .
Could somebody tell me the logic implemented in this piece of code.Is there any document for the same.
Points will be assigned.
Thanks
Ankit -
Urgent: mapping between OID and iplanet ldap
I am trying to configure the mapping between my iplanet ldap server (source) and OID (destination) . My iplanet dn is uid=sharam,ou=People,dc=xsj,dc=xilinx,dc=com and my OID dn is cn=sharam,cn=users,dc=xsj,dc=xilinx,dc=com
My mapping file looks like this:
DomainRules
dc=xilinx,dc=com:cn=users,dc=xsj,dc=xilinx,dc=com:cn=%,cn=users,dc=xsj,dc=xilinx
AttributeRules
givenname
facsimiletelephonenumber
departmentnumber
mail
uid::::cn
telephonenumber
pager
employeenumber
l
sn
title
When I load this using ldapUploadAgentFile.sh, I am getting the following error in ldap/odi/log/IPlanet.trc file. Any ideas what I am doing wrong??
Trace Log Started at Mon Jul 08 11:28:47 PDT 2002
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708112903
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708112917
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708112933
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708112948
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113003
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113018
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113033
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113048
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113103
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113118
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113133
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113148
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113203
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113217
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113233
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113248
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113303
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113317
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113333
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error Encountered
IPlanetImport:Error in Mapping EngineODIException: DIP_GEN_UNKNOWN_FAILURE
ODIException: DIP_GEN_UNKNOWN_FAILURE
at oracle.ldap.odip.map.MapEngine.constructDN(MapEngine.java:258)
at oracle.ldap.odip.map.MapEngine.mapDomains(MapEngine.java:196)
at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:172)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:323)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:214)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:124)
Updated Attributes
orclodipLastExecutionTime: 20020708113348
orclOdipSynchronizationStatus: Mapping Failure;Agent Execution Not Attempted
orclOdipSynchronizationErrors: Unknown Error EncounteredStart the odisrv with the debug flag set to 16. This should give you a more detailed trace which might help you sort this.
Hope this helps
Vinodh R. -
Menu path : User Administration > User Mapping > User Mapping .
Searching (blank) in Users
Clicking start
getting the following error :
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User with id USER.R3_DATASOURCE.AC010-99 not found!.
Exception id: 05:41_15/12/05_0004_3446650
See the details for the exception ID in the log file
Please help me out. cannot understand anything .Hi Alfred
In the log file I found the following information :
Date : 12/19/2005
Time : 10:52:40:250
Category : /System/Server
Message ID : 00142216317C004A0000000B0000095C0004083FBD63465C
Severity : Error
Location : com.sap.portal.portal
Source Name : com.sap.portal.portal
Thread : Thread[PRT-Async 0,5,PRT-Async]
Message : Exception ID:10:52_19/12/05_0005_3446650
[EXCEPTION]
com.sapportals.portal.prt.component.
PortalComponentException: Error in service call of Portal
Component
Component : pcd:portal_content/administrator/super_admin/
super_admin_role/com.sap.portal.user_administration/
com.sap.portal.user_mapping/
com.sap.portal.userMappingAdmin/
com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent
User : RAKTIMB
at com.sapportals.portal.prt.core.PortalRequestManager.
handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.
dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.
AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.
run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable
.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.
run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.
PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:150)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sap.security.api.NoSuchUserException: User with id USER.R3_DATASOURCE.AC010-99 not found!
at com.sap.security.core.imp.UserFactory.getReadonlyUsers(UserFactory.java:274)
at com.sap.security.core.imp.UserFactory.getUsers(UserFactory.java:288)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingTableModel.searchUsers(UserMappingTableModel.java:171)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.searchUsers(UMTableModel.java:566)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.search(UMTableModel.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:226)
... 11 more
Datasource : 3446650:D:\usr\sap\EP1\JC00\j2ee\cluster\server0\log\defaultTrace.trc
Application : sap.com/irj
Argument Objs : com.sapportals.portal.prt.component.
PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/
super_admin_role/com.sap.portal.user_administration/
com.sap.portal.user_mapping/com.sap.portal.
userMappingAdmin/com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent
User : RAKTIMB
at com.sapportals.portal.prt.core.PortalRequestManager.
handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.
dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.
AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.
AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.
ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.
run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.
PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:150)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sap.security.api.NoSuchUserException:
User with id USER.R3_DATASOURCE.AC010-99 not found!
at com.sap.security.core.imp.UserFactory.getReadonlyUsers(UserFactory.java:274)
at com.sap.security.core.imp.UserFactory.
getUsers(UserFactory.java:288)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingTableModel.searchUsers(UserMappingTableModel.java:171)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.searchUsers(UMTableModel.java:566)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.search(UMTableModel.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:226)
... 11 more
Arguments : com.sapportals.portal.prt.component.
PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/
super_admin_role/com.sap.portal.user_administration/
com.sap.portal.user_mapping/com.sap.portal.
userMappingAdmin/com.sap.portal.userMappingAdmin
Component class : com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent
User : RAKTIMB
at com.sapportals.portal.prt.core.PortalRequestManager.
handlePortalComponentException(PortalRequestManager.java:969)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.
dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.
AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.
doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.
AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.
ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.
run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.
PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doContent(UserMappingAdminComponent.java:150)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.
AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.
callPortalComponent(PortalRequestManager.java:328)
... 7 more
Caused by: com.sap.security.api.NoSuchUserException: User with id USER.R3_DATASOURCE.AC010-99 not found!
at com.sap.security.core.imp.UserFactory.getReadonlyUsers(UserFactory.java:274)
at com.sap.security.core.imp.UserFactory.getUsers(UserFactory.java:288)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingTableModel.searchUsers(UserMappingTableModel.java:171)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.searchUsers(UMTableModel.java:566)
at com.sapportals.portal.prt.component.usermanagement.
UMTableModel.search(UMTableModel.java:438)
at com.sapportals.portal.prt.component.usermanagement.
UserMappingAdminComponent.doHandleHTMLBEvent(UserMappingAdminComponent.java:226)
... 11 more
Dsr Component : IN45CCUSAPEP01_EP1_3446650
Dsr Transaction : 77742a80704f11da8ab400142216317c
Dsr User : Guest
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : /System/Server
Resource Bundlename :
Session : 314
Source : com.sap.portal.portal
ThreadObject : Thread[PRT-Async 0,5,PRT-Async]
Transaction :
User : RAKTIMB
Regards
Raktim -
Error in trace log - Error in Mapping EngineODIException
Hi,
in the trace log file of OID i am getting the following error:
Trace Log Started at Mon Sep 24 08:56:34 CEST 2007
c360f8d929b0427faf0c332e05e78025_85bf9c6eeeec452c8a41c3ab23d03fc6 - Error in Mapping EngineODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
ODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.ldap.odip.gsi.DBConnector.connect(DBConnector.java:134)
at oracle.ldap.odip.prov.ProvWriter.initialise(ProvWriter.java:113)
at oracle.ldap.odip.engine.ProvThread.mapInitialise(ProvThread.java:642)
at oracle.ldap.odip.engine.ProvThread.execMapping(ProvThread.java:559)
at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:543)
at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
at oracle.ldap.odip.gsi.DBConnector.end(DBConnector.java:210)
at oracle.ldap.odip.engine.ProvThread.mapEnd(ProvThread.java:718)
at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:546)
at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
Exception in Provthread
It started since I changed password of PORTAL schema.
everything works but i am wondering what's going on because trc file is now full of those messages
thanks,
BranislavHi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************ -
Interface mapping test successful, throws exception in BPM
Hi.
We are having a problem with an Interface mapping which works when
tested in Integration Builder, but throws an Exception when it is part
of the Transformation in a BPM.
The scenarion is such:
1. The sender calls the outbound interface using a web service.
2. XI uses the input and passes to the Integration Process
3. In the BPM, a LOGON message is built to call the web service as
specified by an external web service . The input and
output messages are just a single string, in which the other XML is
embedded.
4. XI receives a response from the web service call
5. XI Extracts the sessionId from the response and combines it with the
initial input (Step 1) to create the query for the query message in
the web service.
It is in Step 5 where the transformation fails, with an Exception in
the DefaultTrace.trc as
Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_LogonResponse_PropertySearchRequest_to_ExternalRequestSOAP_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:EXTERNAL/REQUEST. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
Thrown:
MESSAGE ID: com.sap.aii.ibrun.server.mapping.rb_MappingRuntimeException.EXCEPTION_DURING_EXECUTE
com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_LogonResponse_PropertySearchRequest_to_ExternalRequestSOAP_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:EXTERNAL/REQUEST. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
I have extracted the data from the initial request (step 1) and the
logon response (step 4) and using these I have tested the Interface
Mapping. There is no problem with this and the tests are successful.
From what I can see, because the Response field in the LOGONResponse
contains more XML tags, XI must be parsing it and assuming the tags are
tags in the message, and not just the string, thus it is complaining
that the XSD types do not match. This extra XML Parsing does not take
place in the Interface Mapping Test.
I have put the response into a User Defined Function which just has one
line "return new String("Hello")" and that fails. However, if this UDF
does not have the Response as the input, it does not complain.
Please advise.
--Reenalhi
You will have to use specific replacements for you xml tags if it is coming as a paramter
replace '<' with <
replace '>' with >
for eg: I want to pass <TakeIt>200</TakeIt> as value to Element <A>
Mapping won't work if it is passed like
a) <A><TakeIt>200</TakeIt></A> - Wrong
Instead the replace the angle brackets
b) <A><TakeIt>200</TakeIt></A> - Correct
While testing the mapping in IR (a) will work bcoz the test tool will convert it to (b) format. Check the xml source in test tool.
So ensure the web response is like (b)
rgds,
Arun
Maybe you are looking for
-
In design to pdf/x-1a:2001 embedded fonts
Hello Everyone, I was asked by a printed to export my cs2 indesign file as a pdf/x-1a:2001 file with embedded fonts. The document just came back stating that the font on page 27 is not embedded. The same font is used through out the document. When I
-
thanks!! Julie
-
Making 2 Raid Systems on 1 Machine
G5 Dual 2.5gig PPC This may be a little more technical then this board can handle as it was asked on different thead with plenty of looks but no suggestions, so i'll try here and hope more knowledge lives in this part of town. How to? I have a Raid 0
-
Photoshop Elements Organizer 10 backup freezes at 49%.
I have a large collection (~80,000) photos. I have been trying (unsuccessfully) for a week to back up my collection. Every time it freezes at 49%. I did all the steps here: http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-catalog-backup-c
-
Need to get a spry menu to work on every page with Server Side Includes
I've created such a menu and have pasted the code into its own PHP file and then added the include but it just comes out as a blob of code and links. Any tips on how to do this? Thanks.