Mapping in VC Model creation

Hi GLM,
                Can you guide in VC model creation for mapping the data between SD_DOC to the SALESDOCUMENT field. Actually i am not getting  
      If not already displayed, open the Configure Element task panel and click the select line to the Inputport of Sales orderGetstatus. As you can see in the table at the bottom of the task panel, the SALESDOCUMENT field of the Salesorder Getstatus data service must receive data from the table. To map the data, assign @SD_DOC to the SALESDOCUMENT field, by clicking on the fx column and choosing it from the drop-down list (you will need to scroll down in the list).

got it.

Similar Messages

  • Anyone know anything about transistor model creation?

    Although it was rather difficult, I've managed to get what may be half decent parameters into a 2n3055 model I'm trying to build. (I can never find the famous ".cir" model for anything.)  The main place where I had zilch was input capacitance.  So, since I started with the 2n2222's numbers, I just left them there.
    I droped the "component" in a simple circuit, but clearly my pin mapping is hosed up.  Hence, this leads to my first question.
    I do not understand what "q%p %tB %tC %tE %m"  is or how it maps to my symbol (an NPN transistor).  Does anyone out there have a clue?
    And yes, before you say it to me, yes, yes, yes, I did do the tutorial that had me follow the bouncing ball and create a programmable gain amp being promoted by Texas Instruments.  But what does it do for me in trying to build a well-known transistor's model??
    Also, as I briefly mentioned before, does anyone out there know where this great repository of *.cir models is?  One would think that as common as a 2n3055 is, there most certainly is a 2n3055.cir out there somewhere, but I haven't found it.
    Incidentally, I've found these, but I haven't a clue as to how to make them work for me:
    ----- model 1 -----
    *2N3055
    *Si 115W 70V 15A 20kHz pkg:TO-3 3,2,1
    .MODEL 2N3055 NPN(IS=4.66E-12 BF=360 VAF=100 IKF=0.25 ISE=3.339E-11
    + BR=2 ISC=5E-9 RB=3 IRB=0.001 RBM=0.4 RC=0.04 CJE=5.802E-10 VJE=1.2
    + MJE=0.45 TF=8E-8 XTF=1 ITF=3 PTF=120 CJC=2.121E-10 MJC=0.4 TR=2.55E-6
    + XTB=1)
    ---- model 2 -----
    *.model MJE3055 ako:NSC_4A NPN() ; case Mot 90 (s)
    .MODEL MJE3055 NPN(Is=457.5f Xti=3 Eg=1.11 Vaf=50 Bf=156.7 Ise=1.346p Ne=1.34
    + Ikf=3.296 Nk=.5961 Xtb=2.2 Br=7.639 Isc=604.1f Nc=2.168
    + Ikr=8.131m Rc=91.29m Cjc=278.7p Mjc=.385 Vjc=.75 Fc=.5 Cje=433p
    + Mje=.5 Vje=.75 Tr=1.412u Tf=37.34n Itf=35.68 Xtf=1.163 Vtf=10
    + Rb=.1)
    And this one's a real beaut...
    *      Model Generated by MODPEX     *
    *Copyright(c) Symmetry Design Systems*
    *         All Rights Reserved        *
    *    UNPUBLISHED LICENSED SOFTWARE   *
    *   Contains Proprietary Information *
    *      Which is The Property of      *
    *     SYMMETRY OR ITS LICENSORS      *
    *    Modeling services provided by   *
    * Interface Technologies www.i-t.com *
    .MODEL Qmje3055t npn
    +IS=1.92238e-13 BF=327.43 NF=0.85 VAF=36.105
    +IKF=0.620037 ISE=1.4602e-10 NE=1.50926 BR=0.654697
    +NR=0.935367 VAR=361.05 IKR=6.20037 ISC=6.85154e-12
    +NC=2.96871 RB=16.05 IRB=0.1 RBM=0.161446
    +RE=0.000602331 RC=0.0632768 XTB=0.943656 XTI=1.12302
    +EG=1.05 CJE=9.23675e-08 VJE=0.506151 MJE=0.607139
    +TF=1e-08 XTF=1.35736 VTF=0.997047 ITF=0.999796
    +CJC=5e-10 VJC=0.400198 MJC=0.410184 XCJC=0.803125
    +FC=0.658133 CJS=0 VJS=0.75 MJS=0.5
    +TR=1e-07 PTF=0 KF=0 AF=1
    * Model generated on Jan 18, 2004
    * Model format: PSpice
    I guess what I'm asking is has anyone out there successfully taken a NON *.cir definition and created a fairly well working transistor model, and will that person please be so kind as to help me to understand how to do it for myself?
    I swear NI/Multisim are shooting themselves in the foot by not making user requested Multisim models available for a fee.  They'd make soooo much money.  Moreover, by only offering a scant few models, maybe, just maybe, their starting software price might be affordable to, oh, most people who can't access corporate funding.
    I swear I'll pay a flat fee of $20 to anyone who will sell me a working Multisim model for any discrete component when I need it.  One of the biggest hurdles of Multisim is producing functioning models.  There is a tremendous business opportunity in producing working Multisim models, and it is only a matter of time until some entrepreneur out there cashes in on it.  If NI/Multisim doesn't have the brains to figure this out, I'll bet somebody else out there does. For I have yet to have a model from a manufacturer work in Multisim, much less painlessly be transferred into it. This 2n3055/2955 modelwas tried by me nearly a year ago, but I eventually had to give up. ...and yes, I contacted technical support. Oh boy was that a bad move! ...but that's a story for another time.
    Message Edited by Euler's Identity on 10-28-2007 11:30 AM

    I am only going to make one comment and I will leave the rest to someone with more experience on the model creation end of things. I am interested in that as much as you are since I have tried and and just couldn't figure it out and finally gave up on it.
    My comment is about the model making business as you describe it. There are companies out there that already provide this service. I do not know what prices they charge for their services, but a Google search will pop up quite of few of them. A person would have to check on pricing and all the rest of the details concerning this, but they are out there.
    I want to add that Multisim used to have a partnership with Edaparts.com to supply model information and footprints for free. When Edaparts became a portion of Partsminer.com this freebie ended and they now charge a subscription fee for this service. That really fudged things up in my opinion. Anyway, I thought I would let you know this if you didn't already and maybe you might be interested in checking it out.
    Message Edited by lacy on 10-28-2007 12:30 PM
    Kittmaster's Component Database
    http://ni.kittmaster.com
    Have a Nice Day

  • Photoshop CS4, 3D Model Creation help

    Hello,
    I am a video editor and have the Adobe CS4 suite.
    I would like to ask the community for the best and easiest way to achieve this:
    - Create 3D text for end use in After Effects
    - Take an Illustrator file like a Logo and extrude it to make a 3D model for use in After effects
    It seems 3D programs have so many options that simple tasks are way more involved than I have time for.
    I just want to take a client supplied logo or some text, give it some depth and use it in After Effects as a 3D object.
    I have seen a plugin for Photoshop from Strata that might be a good option, but I only looked at their website.
    Thanks for your help and input.

    While I will say that what the OP wants isn't do able in Photoshop. You can
    doing it using Illustrator and Photoshop, but not Photoshop alone. However,
    Jim isn't 100% correct either. Photoshop does have some limited 3D creation
    capabilities. One of which is turning a flat photo of say the Grand Canyon
    in to a 3D plane that one can then move through in 3D space. You can also
    mape flat photos to simple 3D objects like spheres, etc.
    However, Jim is also correct that Photoshop isn't like Maya, etc. it doesn't
    create complex 3D models and things like that. It is more to complement
    applications like Maya, etc.
    BTW if you would like to see the photo to 3D plane feature in action take a
    look at:
    http://av.adobe.com/russellbrown/MeshFromGrayCanyon_SM.mov
    It is actually a pretty cool option.
    Robert

  • OWB Freezes at ORACLE Model creation.

    I am in the process of migrating an ACCESS database to ORACLE. I followed the following steps:
    1. Create a new ACCESS database and import the database that I want to migrate to the new database.
    2. Compacting the new database as per document instruction.
    3. Some columns in the database tables have binary definitions.
    4. I changed these definitions to "text". Because ACCESS has not a BLOB or RAW definition.
    5. Then I created the XML file with the migration_exporter.
    6. Then I edited the XML file changing the text definitions of these particular files to ORACLE's "RAW" definitions.
    7. Then I create the source model.
    8. Then I create the ORACLE model.
    9. During this creation the OMW get stuck at the fourth table it attempts to convert.
    Please find below an output of Oracle Migration Workbench build 20041207 log file.
    ** Active Plugin : MSAccess
    java.lang.NullPointerException at oracle.mtg.oracleModel.server.OracleModelImpl._getNativePrecisionOrLength(OracleModelImpl.java:8267) at oracle.mtg.oracleModel.server.OracleModelImpl._mapTableColumn(OracleModelImpl.java:8081) at oracle.mtg.oracleModel.server.OracleModelImpl._mapTableColumns(OracleModelImpl.java:8043) at oracle.mtg.oracleModel.server.OracleModelImpl.insertTable(OracleModelImpl.java:3831) at oracle.mtg.oracleModel.server.OracleModelImpl.insertTable(OracleModelImpl.java:3908) at oracle.mtg.msaccess.server.MSAccessSourceModelMap._mapTables(MSAccessSourceModelMap.java:874) at oracle.mtg.msaccess.server.MSAccessSourceModelMap.mapSourceModel(MSAccessSourceModelMap.java:168) at oracle.mtg.msaccess.ui.MSAccessCaptureWizard.map(MSAccessCaptureWizard.java:218) at oracle.mtg.migrationUI.ActionMenuHandler._mapSourceModel(ActionMenuHandler.java:457) at oracle.mtg.migrationUI.ActionMenuHandler.run(ActionMenuHandler.java:95) at oracle.mtg.migration.WorkerThread.run(Worker.java:268)

    Hello,
    You shouldn't be making any edits to the generated XML file, as is stated at the top of the file
    <!-- Do not modify this file as any modification will invalidate the export and subsequent migration of your MS Access database -->
    I would suggest that you attempt to migrate your database as is, without changing definitions as you specified in point 4. Once the XML file has been generated, don't edit it. Load the file into the Migration Workbench and then follow the wizard through to generate the Source Model and Oracle Model.
    I hope this helps.
    Regards,
    Jocelyn

  • NWDS ,Mobile laptop perspective ,model creation failed

    I am using NWDS 7.1 IDE  tocreate a application for mobile laptop using DOE.
    When I create a model using the DOE it says CReation of model failed. And gives the following error.
    Internal error   Plugin name: Common Model Tools Core
       Internal error  : com.sap.ide.cmi.core
    Stack trace
    ObjectRequiredException: ModelClassPropertySetting "//WebDynpro/ModelClass:model.EMP_DATA_ADDRESS/Property:SYNCKEY_MMW/Setting:backendKey", Role "SettingDefinition": A minimum of 1 object(s) is required
         at com.sap.ide.metamodel.webdynpro.implementation.ModelClassPropertySettingProxy._validate(ModelClassPropertySettingProxy.java:358)
         at com.sap.ide.metamodel.core.DevelopmentObjectProxy.validate(DevelopmentObjectProxy.java:825)
         at com.sap.tc.mobile.dt.metaimp.MBOModelImporter.doImport(MBOModelImporter.java:170)
         at com.sap.tc.mobile.dt.metaimp.ModelImportWizard.createModel(ModelImportWizard.java:200)
         at com.sap.ide.cmi.core.model.importer.CMIWizard$2.run(CMIWizard.java:197)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
    Plz help,
    Thanks in Advance,
    Renuka

    Then check your definition - it seems your mapping is not correct
    for more check this forum link
    Re: Unable to create Model from DOE Data Object
    Re: Unable to create model out of DO

  • SQL*Modeler - creation of VARRAY or Collection Type of scalar type errors

    In SQl*Modeler 2.0.0 Build 584, I can create either VARRAY or Collections. These work fine for usre defined structured types but I encounter huge problems when I use a simple scalar type of number or varchar2.
    For instance I create a new collection type, give it a name, specify its a collection (or VARRAY, same problem) then click datatype. On the select Data type box I select logical type. A new window opens, I select VARCHAR from the drop down list.
    Enter the size 15, everything appears fine. I click OK, the select data type screen now shows a logical type of VARCHAR(15).
    So far I'm happy. I generate the DDL, everthing is fine, the DDL contains my collection of VARCHAR2(15).
    Now I save the model, close it and re-open the same model. My collection is now of VARCHAR so the next time I generate it will get an error because the syntax is wrong because it has no length. Same problem happens when selecting a NUMBER, looses the precision and scale but at least that command still works, just with a maximum numeric value.
    Ok, so lets try creating distinct types. Why we can't access domains when specifying types from here remains a mystery to me.
    So I create a distinct type Varchar2_15 which is of Logical type VARCHAR and give it a size. Similarly, create another distinct type of NUMERIC_22_0 precision 22 scale 0. This seems to get around the problem of losing the data but the DDL generated shows the datatype to be either VARCHAR (not VARCHAR2) and NUMERIC(22), not number(22). Now I know that VARCHAR currently maps to VARCHAR2 but isn't guaranteed to in the future (even though its been like that since V6) and NUMERIC is just an alias for NUMBER but its going to confuse a lot of java people and its totally inconsitent and just plain wrong.
    Any suggestions or workarounds will be gratefully received.
    Ian Bainbridge

    Hi Ian,
    I see a bug in save/load of collection types and as result no size or precision and scale information. It's fixed in new release.
    However I cannot reproduce the problem with distinct types - I have them generated as varchar2 and number (this is for Oracle).
    You can check:
    - database you use in DDL generation - I got varchar and numeric for MS SQL Server;
    - mapping of logical types VARCHAR and NUMERIC to native types in "Types Administration".
    Philip
    PS - I was able to reproduce it - I looked at wrong place - DDL generation for collection types is broken - it's ok for columns. I logged bug for that.
    Edited by: Philip Stoyanov on Jun 28, 2010 8:55 PM

  • Query in Distribution Model creation

    Hello All,
    we are trying to build a distribution logic based on the below criteria
    first data object has the following node structure
    DO1
      node1
        childnode1
           -field1
           -field2
        childnode2
           -field1
           -field2
    the second data object has the following structure
    DO2
      node1
         -field1
         -field2
         -field3
    from the above data object i need to send data for the second data object DO2 based on the childnode1 and childnode2 value in DO1, can any one give a solution like how to create dependencies and create a DM.
    Thanks and Regards,
    Venkatesh R

    I understand this: You have a rule on DO1 (which works fine and distributes DO1 instances correctly) and dependencieso n DO2 (which are not distributing DO2 instances for some reason).
    Now your model is something like this:
    Each of the 4 child nodes in DO1 has a partial association to the DO2s root (the missed key field is Language).
    For each of these associations, there is one dependency which will map to a list of instances of DO2 for all languages, corresponding to each DO1 instance. Now you want to prune this list and only send the instance of DO2 for the device's language.
    NOW: If you created the dependency after activating the rule on DO1 then the dependency and its rules will not work right away. You need to deactivate the rule on DO1 and activate it again.
    What you need to do:
    1. Deactivate the Rule on DO1.
    2. Activate the rule on DO1 again.
    Hopefully, that should fix it.
    By the way, the correct way to distribute language specific data for anything is not via another data object, but via a child node.
    Lets say, you have some data (which is language independent) and text corresponding to that data (which is language specific). The way you should ideally do it is:
    1. Create a node as a child to the node containing the language independent data. Put the language specific data in this node (all languages)
    2. Create an Extract association from the parent node to the child node, within the data object.
    3. Use this Extract association to create an extract rule in the Distribution Model. The DOE will then pick the correct language data for each device and send only the child instances that correspond to the language of the device.

  • Should i Map thecommon RFC Model to component contrl or custom controller?

    In my webDynpro project , I have two modules one is DirectCustomer and InDirectCustomer. so i have set of RFS's in a single RFC model. In this  RFS's some are common to both the modules. some are independent to each other. so  i have created two controller component one for each module.Then i mapped the independent RFC'c to each controller seperately. But now the RFC's which are common to both modules to map, Better, should i map to  existing Componentcontroller or should i create new customcontroller (like commoncontroller).
    which i option is better, can u suggest me. I feel that, The common RFC's will be mapped to component controller, bcz it the Base controller for the both customcontroller , indrectly to the viewcontroller.
    Can any body give me the suggestion on this

    Hi Vishal,
    As far as I know it's recommended to use a custom controller for every RFC. This makes sense because if the RFC changes some day you only have to do changes in the specific custom controller.

  • Model creation

    Hi,
    I had created an application which calls a RFC from a R/3 sever say XXX and uses WAS say YYYY. The application is working fine.
    Now i need to give which R/3 server is the application  using in the runtime. can we do this?
    For change a change in WAS in think we will have to change the jco connection and redeploy. Or is ther any other option.
    Please let me know in detail
    Thanks n Regards,
    Mahesh K.

    Mahesh,
    As Ananda says this is problematic with Adaptive RFC Model -- it is impossible to switch logical metadata system. Also you may switch logical data system you have to conform rule that both RFC destinations points to the same R/3 system!
    What I advise you is to replace Adaptive RFC Model with SAP Enterprise Connector. It generates almost the same typed Java classes for accessing remote back-end. However, it does not create any dictionary artifacts (simple types, structures etc) and hence does not require logical data system. And you free to change "messageSpecifier", type JCO.Client, to whatever destination you need.
    Note, that with SAP Enterprise Connector there is no notion of model and dictionary, so creation of context and necessary data types (along with labels, value helps, conversion exits) should be done manually
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Mapping heterogenous object models

    I have two different object models that contain similar information. My ultimate goal is to transfer the data from one into the other. Is there a utility to can facilitate this? An O/O mapping utility?
    I have some experience with O/R mapping utilities, like hibernate and castor, and I believe that the functionality that I require is something similar. Somehow a mapping file would exist that says "this goes there and that goes there" and then maybe an engine which takes care of the object instanciation and calls to the getters and setters.
    Is there some tool out there that does something like this? Any advice would be greatly appreciated. Have a good day.
    T. Urtle Hawk

    How are you 'transferring' the objects? In memory? Over a network?
    If the former, then there probably is not a generic tool. You could use reflection and a configuration file to detail the mappings. It would probably only involve a handful of classes.
    If sending over the network, serialize to XML and writer parsers on both ends (I am assuming that since the data is similar, your serialization routines will produce a common output). Or use JAXB and create a schema for each object.
    There may be a tool to handle object mappings over a network. I'd be surprised to see one deal with mappings within a JVM. But then again, I don't get out much.
    - Saish
    "My karma ran over your dogma." - Anon

  • Does adobe have a 3d model creation tool?

    Hello
    My history is that i use fireworks and dreamweaver. 
    I am messing arround in after effects.
    I would like to create similar objects like i can in fireworks only as 3d objects.
    I am talking about creating shapes, extruding them into 3d space, applying styles and textures.
    Only the result would be a 3d object that i could bring in to after effects where i can animate rotation and movement in 3d space or integrate it into an after effect project.
    I assume that in after effects, i can create shadows from light sources so basically i want extruded text and shapes, perhaps with textures on them.
    Maybe even with alpha transparency patterns painted onto their surfaces.
    What about isllustrator? i have seen many cool 3d effects such as rotation and text extrusion.
    Can these be exported as 3d objects that can be brought into after effects and placed in 3d space?
    Or even photoshop? I think in photoshop, i can only use a small number of basic shapes.
    Thanks
    Jerry

    You can import 3D models into After Effects if they are contained in a 3D object layer in a PSD file.
    You can also use a third-party plug-in like Zaxwerks Invigorator to do exrtusions and sweeps. See this overview.
    You can do some limited but very useful creation of 3D environments with Vanishing Point.

  • Putting a texture map on a model

    hello;
    I have a model, created in Lightwave; in Dir. I have applied
    meshdeform modifier;
    I have a jpg in the cast; the jpg is the texture map produced
    in LW as per a UV map in LW;
    now I want to get the jpg onto the model;
    I have a book, Director 8.5 Shockwave Studio for 3D, that
    suggests that this is possible, but it does not elaborate;
    I suppose that I will need vertexlist and
    texturecoordinatelist and somehow tell director to take the
    (Uth,Vth) pixel of the texture map jpg and place it at the
    (Xth,Yth,Zth) position?
    any thoughts, books, tutorials, phone call?
    thanks
    dsdsdsdsd
    Chicago

    Hi
    I’m a Lightwave-Director 2004 user and swapping the
    image texture on the shader works well for me. You can try add the
    meshDeform Modifier to the model and check & save as a text
    file the textureCoordinateList of the meshes before and after
    swapping the texture`s image in the model, if both list
    aren’t equal there’s some problem with the texture
    coordinates on memory and could be resolved copying the texCoords
    before swapping and pasted again after that. I remember some issue
    about changing images on textures from imported W3D files on Dir 9,
    it doesn’t happens on runtime created geometry or Director
    2004.
    Have a nice coding!!!

  • Prob. connecting to the R/3 thru NDS's SAP Logon Info. while Model Creation

    Hi,
    I'm trying to create an RFC model in webdynpro. In the SAP Logon information screen, I entered all the neccessary information on the Single Server Tab (host name, Sys. No., client, username, pwd., lang.). When I click on Next it throws an error message saying that the user name is not authorized. But I am able to login to the system through SAPGUI though with the same information. I'm unsure what the problem is. Could it be a firewall issue, service issue, any configuration I'm missing??? Please help me out!
    Thank You in advance,
    Ashwin

    hey Rich,
            Thank you for the help. I know that was a very wierd problem. It's fixed now. What happened was that, we are running 2004s and I wasn't aware of the fact that you need NWDS 7.0 to support that. I was running 2.0.9. I just now installed 7.0.7 and the connection to the backened was established as smooth as a cheese cake. Neways, I just lost a fistful of hair in last couple of days. Hope this info helps somebody who encounters the same problem. Points are assigned to you for your effort though...
    Thank you again!!!
    Ashwin

  • Error in New Models Creation  - Loadbalancing /Single Server locally

    Is there any possibility of below error when Creating New Models with Single Server and but NOT Working with Load balancing Option.
    The same code worked when connecting to Single Server locally but doesn't work when New models were created  by selection of loadbalancing Option on Remote Server..during development on source from DTR Server(SLD)..
    I get below error when New Model created with loadbalancing option
    Error - com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error connecting using JCO.Client: null
    Edited by: Raghu v on Jan 26, 2008 1:27 PM

    Hi,
    In EAS, I am getting some for Planning Outline(Essbase outline is working fine), While starting the Planning service through start menu, it throwing error as
    Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
    java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
         at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
         at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
         at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
         at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
         at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
         at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
         at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
         at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
         at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
         at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source)
    Error encountered with Database connection, recreating connections.
    Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
    Thanks,
    CP

  • Mapping with attachments, DataType creation

    Hi all,
    Have to solve two problems:
    1. How to map attachment? - I'm getting message with an attachment on XI, then I need to extract it and convert to base64 string(guess it will be done with java mapping, but I don't know how at all).
    2. I'm trying to create my own DataType. Among others, it will contain an element, witch I have to import from xsd schema. The xsd definition contains global references to other namespaces, e.g.  http://ns.hr-xml.org/2007-04-15:StructuredXMLResume and others.
    Please assist!

    Hi Dmitriy,
    Ad 1.
    Please use adapter module to switch attachment to main message and later map it using java mapping.
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
    Ad 2.
    You need to download all definitions and link them in integration repository.
    Best regards,
    Wojciech

Maybe you are looking for