Mapping information to SCOM Alert "Path" field through the connector

Hello,
We are using the Oracle Enterprise Manager connector (link to the guide: http://docs.oracle.com/cd/E11857_01/install.111/e14736/toc.htm) to send events from OEM to SCOM.
According to the Oracle connector documentation, the Target host parameter from OEM can be mapped with one of the SCOM Alert custom fields paramaters.
The issue is that we need to have this parameter mapped with the SCOM Alert Path field instead of Custom field.
Is it possible from the SCOM side to accept custom values and assign them to Alert Path field through the connectors?
Thank you a lot in advance!

Hi
Alert path is read only property for alert, you can not change this parameter. you can use custom field(1 to 9) or Ticket Id for alert.
Regards
sridhar v

Similar Messages

How to populate the Referance Field Through the Auto Invoice in credit memo

HI ,
I m populating the records in RA_INTERFACE_LINES_ALL and creates the cr Memo through the Auto Invoice ,
but i m like to populate the Referance Field which is exist in Header part of the Cr Memo (Benith the TYPE).
So plz help me,
that which column of the RA_INTERFACE_LINE_ALL populates ,that gave me a data in the Referance Field .
However this referance field is carried out from the table.Column =RA_CUSTOMER_TRX_ALL.ct_reference
Plz Help..
Regards,
DK

what you did?

Ipod touch no longer charges with USB nor does it output sound through the connector

2 problems after the latest iOS update:
(1) my 3rd generation iPod Touch no longer changes when connected to the computer through the USB connection. It says that the device is not supported for connection through USB. My computer is running Snow Leopard and all software is up to date.
(2) it also does not output sound through my clock radio nor through the built-in ipod connection in my MINI.
This all worked great until the latest iOS update. Something broke in the latest update.
anyone else seeing this issue?

You can try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If still problem then the iOS broke full compatibility. you have to then wait for either Apple to fix the problem in an iOS update or for Honda to fix it via a firmware update/
Have you contacted Honda?

How to resize the text field through the expression?

It is necessary that another layer was at 150 pixels to the right of the right side of the text field.

PACK
Syntax
PACK source TO destination.
Effect:
This statement, which is forbidden in classes, converts the content of the data object source to the data type p of length 16 without decimal places. In contrast to the conversion rules for elementary data types, a decimal separator in source is ignored. This assigns the converted content to the data object destination.
The data type of source must be character-type, flat, and its content must be interpretable as a numeric value. The data type of destination must be flat. If destination has the data type p, the interim result is assigned to it from left to right. Surplus characters are cut off on the left, and the decimal places are determined by the data type of destination. If destination does not have the data type p, the interim result is converted to the data type of destination according to the rules in the conversion table for source field type p.
Notes:
The function of the statement PACK is based on the second half-byte of the code corresponding to a character in most character representations of the BCD representation for the corresponding numeric value. This compilation is generally known as "packing".
If the source field contains a number without a decimal separator, and the target field has dobj2 of data type p with sufficient length and without decimal places, the result of the PACK statement (which is forbidden in classes) corresponds to the result of the statement MOVE.

SQL exception thrown while accessing fields through the bean

Hi All
This is the SQL Exception that i get when i try to get the data from the database ---java.sql.SQLException: ORA-01008: not all variables bound
Plz help if u have any idea.
Thanx and regards,
Akshat

It seems like you have set the number of parameters in a PreparedStatement less than the actual number of parameters. This is one possibility.
Regards,
$ Carol.

SCOM alert forwarding

HI All,
I have created custom windows group for 10 SQL server, and enabled 5 Monitors for the custom group , when i map the group in connector it is forwarding all the alerts to the connector. Is there any way i can restrict the alert forwarding with only 5 monitors.Please
help

Hi,
By default, all alerts are forwarded through the product connector. However, you can use the
Product Connector Subscription Wizard to specify which alerts you want the product connector to forward.
How to Configure a Product Connector Subscription
http://technet.microsoft.com/en-us/library/hh212758.aspx
Hope this helps.
Niki Han
TechNet Community Support

Alert Monitor Threshold and Information, Warning and Alerts

Hi,
I defined a Forecast Alert Profile that is supposed to display the MAPE Alert in the Alert Monitor when the MAPE for the said selection is > x %. This x as I understand is maintained in the Diagnosis group of the Master Forecast Profile.
I now try to make use of this Threshold Value Description "Variance is > %. and define >(x-10) % but less than x % as information, x % as warning and >(x +20) as error but I am unable to make out how the alerts are determined and whether these values are indeed read (threshold >)
Secondly my Alert may have been originally based on particular selection(s)- some in FG, some in BG. Some of these selections may not be assigned to the Alert Profile and the Planner may not remember at what level the forecast was carried out to begin with. So my query is at what level of selection is the Alert generated when there is no selection assigned to the Alert Profile ?
Thanks
Amit

Hi, I was hoping someone answers. It was not a profound question I believe
I am also curious to know the same with respect SDP Macro based alerts. When a Macro Alert is triggered at Cell Val > y % and it is called a "warning" per the macro definition, of what good is the information, warning and alert threshold values in the Alert Monitor ?
Does it mean the value 'Y' that I defined in macro step as 'threshold' for alert or process message can be more 'freely' defined in the alert monitor with three distinct values ? I tried testing but I am unable to conclude.
Please help me understand
Thanks
Amit

Exposing MDM vendor information through the Portal

We are looking to expose certain MDM vendor information (such as; create, modify, etc) through the Portal and allow the users to update their information via the portal.
For example, vendor X will log onto the portal, they will only see their specific vendor details and will be able to modify their address, bank details, etc... through a number of iViews.
Please assume that we will be using the latest version of MDM (5.5 SP3?) and EP6.0 SP14.
My questions are:
- is there a business package that will provide us with that specific functionality?
- if not what is the best way (if it is actually possible) of exposing this functionality through the portal (I guess we would need to create a web dynpro component)?
Many thanks

Hi James,
We have business package for MDM SP3 with some built-in iviews, which was released in Nov/Dec 2005. They also have create/modify iviews.
But they don't have iViews to add to a qualified table. In your case for Bank details I don't think you can use the existing iviews.
Thanks
Subbu

OTL - Generate Flexfield and Mapping Information

Hi All,
I am implementing OTL with payroll, i have done the required setup.
1. created element
2. created alternative name mapping the element
3. created application set ..and etc...
4. created preference attached all newly created preferences
5. assigned to all employees
But i am not able to see the elements in the list box in the timecard screen. I know there is some setup missing and need to run the "Generate Flexfield and Mapping Information" program
Can you any tell me the steps enable the elements in timecard.
Stalin G

Hi Stalin
Have you attached the Alternate name to preference "Self Service Timecard Alternate Name Set Defined for a User" ? Also please check if the employee has the correct Preference attached.
Please let me know if you find some other thing.
Thanks,
Gaurav

USEREXIT to update BSEG-BVTYP field through VF01 transaction

Hi Folks !
I have a requirement where I have to update the Partner Bank Type(BSEG-BVTYP) field through the transction VF01.
I tried with many exits like SDVFX008, RV60AFZC, RV60AFZZ and Includes like ZXVVFU01, ZXVVFU08, but unfortunately no results.
I want to know which structure is passed from SD to FI when we create a invoice in VF01.
Please help me, how could i update this field through VF01.
Thanks in advance !

Hi Sudarsan
What u r telling u tried the exit
SDVFX008 and u didnot get the solution.
This exit is for the structure sd-fi only and i have created 2 projects with this for somw enhancement and its populating with vf01.
Pls try to craete a project on this exit and write code in the functionm exit of that definitely u will get the solution.
Rajendra

Whcshdata.htm Contains No Mapping Information

I have a FM project linked to RH, but for some reason, some of the help systems I am outputting do not contain the mapping information (Topic IDs and Topic #s) in the whcshdata.htm file.
The book is a single-sourced FM project. All the FM chapters exist in one directory. But there are three FM book files used to create three different outputs. Many of the chapters are shared across books, some chapters are unique to a specific output. So, keep in mind that many of the chapters share the same topic aliases.
All of the FM books have been successfully linked in RH to create three help systems. In all three instances, when I open or export the default map file, all of the correct topic aliases are there.
However, when I compile the help systems as WebHelp output, only one of the three successfully generates the mapping informatoin in the whcshdata.htm file. In the other two systems, the whcshdata.htm file is there, but when you open it, no mapping information is contained therein.
I have followed the same procedure for all three systems/linking, so I don't have any clue why I'm not getting this data.
Can someone help? I'm on a deadline to deliver these projects and it's a big issue.
Thanks,
Douglas

Hi, sorry for the late reaction. I guess your post slipped trough.
Did you select the map file you want to use in your SSL settings?
Make sure you have selected all the map files you want to use or your output will indeed not have any CSH information.
Greet,
Willam

Search Path Field Height

We have a large LV developer user base and our users are getting confused by the limitations on the search path fields. The lowercase q really looks like a q (see below), any ideas on how to change this to make it more clear?
Thanks!
Using LabVIEW2012 32bit

Ironically, in your message both characters "lowercase g and looks like a q" they both look the same. I understand, looking at the image that you are saying lowercase G and lowercase Q look the same, apparently because the field height clips the image?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

SCOM 2012 R2 Error The connector the module is configured for no longer exists

Hi All,
The Microsoft Operations Manager Connector Framework Alert Forwarding module failed to mark an alert for forwarding because the connector the module is configured for no longer exists.
Connector Id: 57a14deb-a74b-520e-ac32-ba8d340d112d

Hi Mark,
You can try the following steps,
This is because we have deleted a connector that still had a live subscription associated with it. We need to go and delete that subscription to clean this up. The problem is – the connector is gone, so the subscription is no longer available
in the UI.
Therefore – we will have to delete it manually. This subscription (as all subscriptions) is kept in the “Notifications Internal Library” MP. You need to export that MP to XML. FIRST MAKE A BACKUP COPY OF THIS FILE IN CASE YOU MESS UP, then
open it for editing in Notepad, or your XML editor of choice.
All subscriptions in this MP are kept in the <Monitoring> <Rules> section. To identify which connector subscription RULE is causing the problem – you can search for the connector ID, from the event 11502 above. In my example – my connector
ID from this event is: b7a64deb-f7ff-440e-bc30-d08d340dfe8d.
So – I search the XML for that string – and find b7a64deb-f7ff-440e-bc30-d08d340dfe8d in the <WriteActions> section of a specific <Rule>:
<WriteActions>
<WriteAction ID="WA" TypeID="SystemCenter!Microsoft.SystemCenter.ConnectorFrameworkAlertWriteAction">
<ConnectorId>{b7a64deb-f7ff-440e-bc30-d08d340dfe8d}</ConnectorId>
</WriteAction>
</WriteActions>
Good – I have identified the problem. Now – I need to do two things:
Find the rule ID – to identify the display string associated with it… then delete that display string.
Delete the orphaned subscription rule.
So – I move up in the XML section of this rule – and I find my Rule ID. (here is mine:)
<Rule ID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb"
I then search for the part above which I bolded in blue (yours will be different – search for your string)
What this finds – is the display string section of the XML – which maps this GUID ID to the common name that you gave the subscription. (here is mine:)
<DisplayString ElementID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb">
<Name>Process All New Alerts</Name>
</DisplayString>
So – I need to DELETE this section from the XML…. just the section above, from my very specific <DisplayString ElementID="ProductConnectorSubscription2850f8e3<GUID> line, to the very next </DisplayString>.
Next – I need to delete the entire <rule> which contains the subscription we want to remove. Mine will be from:
<Rule ID="ProductConnectorSubscription<GUID> line to the very next </Rule>
When you are happy – you can import this XML MP back into the management group. It should import with no errors. If you get an error – you made a mistake when editing the XML. You can look on the RMS event log for the specific problem – there
will be a critical event there if it fails to import.
second part for this link
http://blogs.technet.com/b/kevinholman/archive/2009/09/10/removing-an-old-product-connector.aspx
Regards, Ibrahim Hamdy

How do I create a cut-path ONLY on the outer edge of my vector image?

Okay, I have a dilemma. This could be one of those things that is so simple when explained, but at this moment in time it has me scratching my head.
Here I have a vector image. The pink stroke is a cut path that the software I use at work recognises and cuts. (Used for vinyl decals/stickers etc). All the lines highlighted in pink is useless to me, as it would cut out each individual line.
All I need is the outer edge of the entire graphic.
Note my crudely drawn red lines that border the image, that is exactly what I need. As you can see, the paths run through the image. BUT...When I try to erase the paths using add anchor point then cut path at selected anchor points so I can remove that particular segment, the colour essentially "leaks" as it isn't a closed area anymore. Rasterizing the image destroys the quality and I would like to be able to perform this task without loss of quality.
If anybody could help, I'd be eternally grateful!
Thanks,
Ben

Ben,
As far as I can see there are three sets of pink strokes, and I guess you wish to use the outermost one and have it form one continuous path round everything and in the hole between the letters.
Presuming you have the other strokes under control, you may be able to copy everything to the top of the stacking order and then, with all the copies selected, Pathfinder>Unite to get that compound path with pink stroke and no fill, which you may then split into one path for the outside and one path for the hole if needed.

The New Field in the FBL5N/FBL1N doesn't appear

Hi guys,
I created an APPEND STRUCTURE with the NAME1 field in the table RFPOS and through the transaction FIBF an Event that calls a Function and move the Name of Customer or Supplier according to the transactions FBL5N or FBL1N.
This field, NAME1, should appear in these transactions when the user choices the hidden fields through the Change Layout button. But this field doesn't appear...
I debbuged the Function Module and the data have been moved. (It works...)
Please, someone did it before and could help me to solve it?
Why doesn't the Field NAME1 appear? What could I do??
Thanks a lot!
Regards,
Marcos Fernando Dotta

Hi
The new fields have to be appended in the structure RFPOSX too, and then you need to run the program RFPOSXEXTEND in order to add the new fields in layout structure RFPOSXEXT
Max

Mapping information to SCOM Alert "Path" field through the connector

Similar Messages

Maybe you are looking for