Mapping issue - transformdate mapping function - urgent

all,
payload has date as "000000000" the mapping function transformdate is changing to 0002XXXXX.
y is this so?
we are on sp 18 of xi 3.0.
Did anyone face this issue
Please respond.
reg

dont worry
it is because in the datetrans function advanced properties, you have selected the option of a Calendar is linient and in any case the result, it is a bug
When a Calendar is lenient, it accepts a wider range of field values than it produces. For example, a lenient GregorianCalendar interprets MONTH == JANUARY, DAY_OF_MONTH == 32 as February 1. A non-lenient GregorianCalendar throws an exception when given out-of-range field settings. When calendars recompute field values for return by get(), they normalize them. For example, a GregorianCalendar always produces DAY_OF_MONTH values between 1 and the length of the month.
Message was edited by:
Shabarish Vijayakumar

Similar Messages

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

ORA-06521: PL/SQL: Error mapping function

Hi folks,
I am trying to run gather_table_stats for a particular table but am getting the below error. Any ideas?
SQL> execute DBMS_STATS.gather_table_stats( ownname=>'DBO',tabname=>'CD_JOURNAL_CHANGE_REG',method_opt=>'FOR ALL INDEXED COLUMNS',cascade=>TRUE);
BEGIN DBMS_STATS.gather_table_stats( ownname=>'DBO',tabname=>'CD_JOURNAL_CHANGE_REG',method_opt=>'FOR ALL INDEXED COLUMNS',cascade=>TRUE); END;
ERROR at line 1:
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_STATS", line 10301
ORA-06512: at "SYS.DBMS_STATS", line 10315
ORA-06512: at line 1
I have runt utlrp.sql as sys but with no avail.
Kindest Regards,
Will

You did not mention if the applicable table contains an ADT columns, nested tables and so on.
You can also do a basic test to determine if the problem is potentially with the table, or with dbms_stats itself. Create a plain table, e.g.
create table foo( id number, foo_char varchar2(100), constraint pk_foo primary key( id ) using index );
Using the exact same dbms_stats parameters, do this table. If it works, it points to a potential problem with the other table - some data structure/data type issue maybe. If it does not, then you have a problem with dbms_stats itself.
You can also drop the indexes on the DBO table and try dbms_stats with different parameters. I.e. change the conditions to see if the error still occur in order to isolate the problem.
You also could log an iTar/SR for this with Oracle Support.

ORA-06521: PL/SQL: Error mapping function :ORA-06522:undefined :ODCIAggre

Hi,
I am getting the following error :
SQL> select MinDistance(TT) from egg1;
select MinDistance(TT) from egg1
ERROR at line 1:
ORA-06521: PL/SQL: Error mapping function
ORA-06522: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/custagg.so:
undefined symbol: ODCIAggregateInitialize
I am compiling my C program with OCI using the following command :
g++ -Wall -c custagg.c -o custagg.o -I$ORACLE_HOME/rdbms/public -I/usr/lib
I am linking to get a shared library custagg.so file with following command :
ld -shared -o custagg.so custagg.o $ORACLE_HOME/lib/l*.so ../../usr/lib/libstdc++.s*
I am not getting any errors during these two phases.
And when i am calling the extproc custagg(Mindistance) which i implemented using ODCI(oracle data catridge interface) ...I am getting the error undefined symbol : ODCIAggregateInitialize
So can any one please let me know what shared libraries are required to access the ODCI services and also am I compiling and linking it the right way or am I missing any libraries.
I have the oci.h & odci.h and several other header files in my :
$ORACLE_HOME/rdbms/public
And while linking i am using : $ORACLE_HOME/lib/*.so files.
So I don't know whether my directory is missing some shared files related to ODCI : can any one please let me know which files or shared libraries I am missing :
Below are list of files in my : $ORACLE_HOME/lib :
custagg123.o libclntsh.so libdbcfg10.so libjox10.so libocci.so.10.1 liborasdkbase.so libskgxpd.so libunwind.so.5
custagg.so libclntsh.so.10.1 libemmas10.so libldapjclnt10.so libocijdbc10.so liborasdkbase.so.10.2 libskgxpu.so libxdb.so
facility.lis libclsra10.so libhasgen10.so libnjni10.so libocr10.so liborasdk.so libsqlplus.so shell.so
hsdb_odbc.so libcorejava.so libheteroxa10.so libnjssl10.so libocrb10.so liborasdk.so.10.2 libsqora.so.10.1 sysliblist
hsdb_ora.so libcoresh10.so libhsbase.so libnnz10.so libocrutl10.so libqsmashr.so libsrvm10.so
lclasses12.zip libcprts.so.5 libhsnav.so libnque10.so libodm10.so libskgxn2.so libsrvmhas10.so
libagtsh.so libcxa.so.3 libimf.so libntcpaio10.so libodmd10.so libskgxns.so libsrvmocr10.so
libagtsh.so.1.0 libcxa.so.5 libirc.a libocci.so libons.so libskgxp10.so libuini10.so
Please reply to my queries.
Please let me know if you want to have a look at the symbols of my object file
Thanks & Regards,
-NN

Your issue may relate to XE and it may relate to OCI but it does not relate to SQL and PL/SQL. Consider posting your question in a forum where it will be on topic.
When you do include full version information (3 decimal places) and the code that is generating the exception.

ORA-06521:PL/SQL:Error mapping function :ORA-06522:undefined :ODCIAggregate

Hi,
I am getting the following error :
SQL> select MinDistance(TT) from egg1;
select MinDistance(TT) from egg1
ERROR at line 1:
ORA-06521: PL/SQL: Error mapping function
ORA-06522: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/custagg.so:
undefined symbol: ODCIAggregateInitialize
I am compiling my C program with OCI using the following command :
g++ -Wall -c custagg.c -o custagg.o -I$ORACLE_HOME/rdbms/public -I/usr/lib
I am linking to get a shared library custagg.so file with following command :
ld -shared -o custagg.so custagg.o $ORACLE_HOME/lib/l*.so ../../usr/lib/libstdc++.s*
I am not getting any errors during these two phases.
And when i am calling the extproc custagg(Mindistance) which i implemented using ODCI(oracle data catridge interface) ...I am getting the error undefined symbol : ODCIAggregateInitialize
So can any one please let me know what shared libraries are required to access the ODCI services and also am I compiling and linking it the right way or am I missing any libraries.
I have the oci.h & odci.h and several other header files in my :
$ORACLE_HOME/rdbms/public
And while linking i am using : $ORACLE_HOME/lib/*.so files.
So I don't know whether my directory is missing some shared files related to ODCI : can any one please let me know which files or shared libraries I am missing :
Below are list of files in my : $ORACLE_HOME/lib :
custagg123.o libclntsh.so libdbcfg10.so libjox10.so libocci.so.10.1 liborasdkbase.so libskgxpd.so libunwind.so.5
custagg.so libclntsh.so.10.1 libemmas10.so libldapjclnt10.so libocijdbc10.so liborasdkbase.so.10.2 libskgxpu.so libxdb.so
facility.lis libclsra10.so libhasgen10.so libnjni10.so libocr10.so liborasdk.so libsqlplus.so shell.so
hsdb_odbc.so libcorejava.so libheteroxa10.so libnjssl10.so libocrb10.so liborasdk.so.10.2 libsqora.so.10.1 sysliblist
hsdb_ora.so libcoresh10.so libhsbase.so libnnz10.so libocrutl10.so libqsmashr.so libsrvm10.so
lclasses12.zip libcprts.so.5 libhsnav.so libnque10.so libodm10.so libskgxn2.so libsrvmhas10.so
libagtsh.so libcxa.so.3 libimf.so libntcpaio10.so libodmd10.so libskgxns.so libsrvmocr10.so
libagtsh.so.1.0 libcxa.so.5 libirc.a libocci.so libons.so libskgxp10.so libuini10.so
Please reply to my queries.
Please let me know if you want to have a look at the symbols of my object file
Thanks & Regards,
-NN

It's only a quick guess but have you checked your tnsnames.ora file to ensure you've opened the environment to find the libraries? If you set the EXTPROC_DLLS=ANY, you open the database to security issues but it should tell you if this cause because you can't access the library that contains the symbol.
SID_LIST_CALLOUT_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = <oracle_home_directory>)
(PROGRAM = extproc)
(ENV = "EXTPROC_DLLS=ONLY:
<oracle_home_directory>/customlib/writestr1.so
,LD_LIBRARY_PATH=<oracle_home_directory>/lib")
)

Performance of an UDF v/s standard graphical mapping functions

Hello Experts,
I would like to get your opinion/comments on the performance issues with respect to speed of execution when using graphical functions for doing the date conversion requirement given below:
Requirement is to convert input date u20182008-12-03u2019 from the source side to u201820081203u2019 on the target side.
We have used the standard graphical mapping functions 'substring' & 'replacestring' for doing this conversion as explained here: The u2018substringu2018 function is used to capture the part of the string from the source. A u2018constantu2019 with value u2018u2013u2018 is replaced by u2018constantu2019 (empty value) by using the standard text function u2018replaceStringu2019 in the target side.
We did the same using the following UDF too:
public String convertDate(String dateStringInOriginalFormat) {
            SimpleDateFormat originalFormatter = new SimpleDateFormat("yyyy-MM-dd");
            SimpleDateFormat newFormatter = new SimpleDateFormat("yyyyMMdd");
            ParsePosition pos = new ParsePosition(0);
            Date dateFromString = originalFormatter.parse(
                        dateStringInOriginalFormat, pos);
            String dateStringInNewFormat = newFormatter.format(dateFromString);
            return dateStringInNewFormat;
From a critical performance point of view, which approach will fare better?
Thanks in Advance,
Earnest A Thomas
Edited by: Earnest Thomas on Dec 4, 2008 6:54 AM

Hi,
Not only in this case but in general it is always better to use the functions available in MM and only if your requirement is not satisfied with the standard mapping functions then go for UDF.
Also for your requirement no need of going for substring....you can directly use the DateTransform function available.
Source --> DateTransform --> Target
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 4, 2008 11:25 AM

Map functionality in interactive planning using PC MILER instead of IGS

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Dear Experts,
We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
The PC MILER is using the customized solution for calculating of the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
I have configured all the relevant settings that are required for using the MAP functionality in interactive planning. However the VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
Please advice if anyone came across similar integration issues, or have any insights on this issue?
Thank you,
Ramesh.

Accessing container variable of BPM in Message Mapping function

Hi,
I have a scenario in BPM where i have a container variable that is used as a loop counter.I want to access that counter defined , every time when i go around the loop and perform certain actions based on that counter. so how can i access that variable in my message Mapping function.

Hi Sudharshan,
check these links, hope they give you the required information (i think there is some problem with SDN site, check these links after a while)
Re: How to use Container Variable across Maps
Container object in Message Mapping
Copy value of container (abstract interface) to an other container
Regards
Vishnu

Writing message mapping function in Java in integration repository

Hi XI Pundits,
I am new to XI. I was working on Message mapping in intergration repository.
To map the source messages to target messages, we do graphical kind of mapping like drag and drop.
There are some functions aavilable at the bottom like concatehate, trim and etc. which we use if we need to modify the source message and map to target.
But in case we face a situation when we don't find the function which suits our requirement, I guess we need to write a new function. We can write these new function using Java only.
Can someone throw some light on this ?
What do we do to invoke java editor in integartion reposity to write mapping function in java ?
Can someone give an example of snippet of code ?
Thanks.

Hi Tushar,
Go thro this help link. You will get all info about User defined function.
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/frameset.htm
To get more understanding on mapping go thro this link(PDF File)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this helps.
regards,
P.Venkat
Message was edited by: Venkataramanan

ORA-06521: PL/SQL: Error mapping function with 10.1.0 external procedure

We have an external procedure running fine on 8.1.7 on VMS. After compiling and linking succesfully under 10.1.0, I get ORA-06521 PL/SQL: Error mapping function and ORA-06522: ERROR - vms_dlsym for file x, where x in the filename of the linked executable. Another external procedure that does not connect to the 10.1.0 database runs fine. What could be causing this error in Server 10.1.0 on VMS?
Thanks,
Dave

Here is the code to create the function:
CREATE OR REPLACE FUNCTION f1
(h_file_name IN VARCHAR2)
RETURN BINARY_INTEGER
IS EXTERNAL
LIBRARY l1
NAME "f1"
LANGUAGE C
WITH CONTEXT
PARAMETERS
(CONTEST,
h_file_name string);
Here is the beginning of the Pro*C:
int f1(epctx, h_file_name)
OCIExtProcContext *epctx;
char h_file_name[70];
char h_line_txt [251];
int lineno;
FILE *fptr;
/* register the connection context ... */
EXEC SQL REGISTER CONNECT USING :epctx;
The function loads a flat file into the database. It is probably not related but are unable to SQLPLUS/ or SQLLDR/ into the database from an OS autheniticated account (get ORA-12547: TNS:lost contact.) Thanks for taking the time to look at this. There aren't many people trying this on VMS, I'd bet.

ORA-06521: PL/SQL: Error mapping function while writting into a text file

Hi,
I'm getting an errror ORA-06521: PL/SQL: Error mapping function while trying to write data into a text file.
I'm using the following code:
--To create a new directory
create or replace directory temp as 'C:/temp';
declare
                l_str varchar2(1000);
                output_file utl_file.file_type;
                cursor test_write_cur is
                     select EMPNO,ENAME,JOB,SAL,HIREDATE
                       from EMP
                     where DEPTNO=30;
begin
           output_file := utl_file.fopen('TEMP','TESTFILE.txt','w');
           for test_write_rec IN test_write_cur
           loop
            l_str :=     test_write_rec.EMPNO||'^'||test_write_rec.ENAME||'^'||test_write_rec.JOB||'^'||
                     test_write_rec.HIREDATE||'^'||test_write_rec.SAL||chr(10);
            utl_file.put_line(output_file,l_str);
                 end loop;
           utl_file.fclose(output_file);
end;Please suggest me if i'm wrong.
Thanks & Regards,
Sanket Mishra

Dear Sanket,
I think you are need use TO_CHAR() function
to_char(test_write_rec.EMPNO) ,
to_char(test_write_rec.HIREDATE,'DD.MM.YYYY')
to_char(test_write_rec.SAL)

Call to ldap server fails ORA-06521: PL/SQL: Error mapping function

I am getting this error(s)
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_LDAP_API_FFI", line 0
ORA-06512: at "SYS.DBMS_LDAP", line 1338
ORA-06512: at "SYS.DBMS_LDAP", line 1273
ORA-06512: at "SYS.DBMS_LDAP", line 529
ORA-06512: at line 127
after binding and searching an ldap directory.
Line 127 is:
my_dn := DBMS_LDAP.get_dn(my_session, my_entry);
Both of the 'my_xx' parameters have been successfully set earlier in the script I believe as they produce no errors and DBMS_LDAP.count_entries(my_session, my_message) returns = 1.
I am following the example at:
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96577/smplcode.htm#636994
In fact any of the functions used in the 'while loop' in the above example give a similar error.
Apparently SYS.DBMS_LDAP_API_FFI is a call to an external C program, but this would be a standard Oracle one, not one I have written.
I am connecting to a non-Oracle ldap server, and have tried several (OpenLDAP 2.X, & Windows 2000 AD), with same results.
Any suggestions gratefully received.
Cheers
KIM

Fixed by running the catldap.sql script (ORACLE_HOME/rdbms/admin/catldap.sql) as SYS user and recreated the dbms_ldap packages. I am not sure why some of the functions worked OK and others did not.
KIM

Ldap problem, ORA-06521: PL/SQL: Error mapping function

I am getting this error(s)
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_LDAP_API_FFI", line 0
ORA-06512: at "SYS.DBMS_LDAP", line 1338
ORA-06512: at "SYS.DBMS_LDAP", line 1273
ORA-06512: at "SYS.DBMS_LDAP", line 529
ORA-06512: at line 127
after binding and searching an ldap directory.
Line 127 is:
my_dn := DBMS_LDAP.get_dn(my_session, my_entry);
Both of the 'my_xx' parameters have been successfully set earlier in the script I believe as they produce no errors and DBMS_LDAP.count_entries(my_session, my_message) returns = 1.
I am following the example at:
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96577/smplcode.htm#636994
In fact any of the functions used in the 'while loop' in the above example give a similar error.
Apparently SYS.DBMS_LDAP_API_FFI is a call to an external C program, but this would be a standard Oracle one, not one I have written.
I am connecting to a non-Oracle ldap server, and have tried several (OpenLDAP 2.X, & Windows 2000 AD), with same results.
Any suggestions gratefully received.
Cheers
KIM

Scott,
Thanks for your concern. I should have explained. I am working in HTMLdb, successfully using ldap to authenticate, but now need to get the logged-in user's name and other details. All my attemps to use the wwv_flow_ldap functions have failed, and I am no resorting to DBMS_LDAP to get what I want. I am hoping thatsome helpful person can shed some light on this problem
Cheers
KIM

How to debug mapping function module during delta extraction?

Hi experts,
Somehow our delta is not working properly, and i would like to debug our mapping function module. How can i debug it during a delta extraction?
Some info:
Our source system is CRM and our extractor is extracting one order document (contracts in this case). I know that when we modify a contract, a bdoc is generated and then passed throught the mapping function then the extracted data to the delta queue. I just need to debug when the bdoc is being mapped to see what's wrong with the extracted data.
Thanks in advance,
Van

Hi,
Since you are using a Function Module for the Extraction. Edit the Function Module and give "BREAK-POINT" before the loop command. Check and activate the Function Module.
Now Extract the datasource using RSA3. Now you can debug it. After checking remove the "BREAK-POINT" from the function module. Also Check and activate the same.
Regards
Jayaram M

Is there a way I can use the iPhoto maps function within Keynote?

Hi,
I recently brought a Macbook Pro, and am having my first go at using Keynote. Having previously played with iPhoto, there is the map function built in, and I was wondering whether there is a way to use this in Keynote?
I was hoping to avoid using a screenshot of google maps as its not interactive, and plus quite bland too.
Any way this can be done?
Thanks,

Keynote can not interact with other applications other than launch a web browser, it cant display web content within a Keynote presentation.
The only way Keynote can be used to display a "live" web content is to launch a browser at a specific webpage, Google Maps for example,
To try this place a shape on the slide, select it then:
Inspector > Hyperlink > Enable as Hyperlink > link to webpage; type in the web address in the URL box

Mapping issue - transformdate mapping function - urgent

Similar Messages

Maybe you are looking for