Mapping lookups need to be done for sender or for reciever?

Hi All,
i have a small doubt do we need to perform mapping lookups for sender or reciever? if Reciever then why?
Regards
Sami

Hi,
1)what is lookups
Lookups are used to identify / request the data from mapping , i mean interupting the process and looking for data which was stored in some where and get that data and comback to process and continue with that data.
2.why we can use for lookups.
We will use these type of lookups in Message mapping for refering DB Lookup for data base which is not SAP, RFC lookups for SAP data
How we have to create the lookups?
Check this weblogs with some screenshots on how to achieve this:
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
/people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
Satya

Similar Messages

Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight

macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight?

What is it you need - Windows installer disc or something else? Your question is unclear. Could you be more specific?

Process for sending equipment for Repair to the vendor

Hi,
My scenario is as below:
1) Equipment is created without Material / Serial no.
2) Equipment has to be sent for repair to the same vendor from whom it has been procured.
Please let me know the standard process followed in this case. Need process for both indegeneous material and Imported material.
Please check and suggest.
Regards,
Deepa

deepa the process for sending equipment (material) to vendor in foreign country
follow the below step
Refurbishment order (standard order type PM04) and process it as an external service using Operations control key PM02. Here is the process
1. Create Refurbishment order for the material
2. Create operations (PM02) for external processing. PReq will be generated once the order is released
3. Send out the material to vendor for repair
4. GR/IR upon receipt of the material from vendor
5. Receive material back to storeroom (IW8W)
6. Order settlement to material

Solaris don't send message for domain on localmachine

Hi,
I have the following problem in my solaris box.
When I try send a message for any user in domain pointed to my server messages don't arrives. But if I try send for other server/location the messages are sent and user receive that.
Any help is appreciate.
I will use sendmail and all default configurations are in place. If any help or information please talk me.

I don't believe you understand. Maybe I didn't describe the problem correctly. If I go into my photos, select a photo then click on the icon to forward the picture... I then select "message" add a recipient, then click send. The screen disappears as to indicate the picture was sent. The recipient does not receive the picture. If I then go into messages, it does not show the picture as a sent message... It is not being sent. It only will send a picture if I am already I'm the messaging app and either take a new picture, or select existing. My daughter updated to 7.1 today on her 4S and does not have this problem.

Eem applet or script for sending email for syslog denies

I am wanting to have my isr's send an email when a certain number of deny's occur on an ace. So if i have a particular ace set up to log when tcp 3389 denied. Then the eem applet or script would track when that deny entry happens. When the deny hits on that entry reach three times, it will send an email alert. The thing i am wondering about is how to set a variable within an event syslog pattern statement. For instance, how do i say express a variable for the source ip/port in the below
config-applet)# event syslog pattern "SEC-6-IPACCESSLOGP: list 198 denied tcp 201.198.71.51(38531) -> 212.184.81.52(3389)" occurs 3
The source ip and port could rotate or change so i'd need to express that with some kind of variable. How could that be done?(or is there a better approach altogether).

I put the below script in and it takes fine but does not send email alert. Is there something more to do for configuring email sending?
event manager applet Intrusion-Tracking
event syslog pattern "SEC-6-IPACCESSLOGP:.*-> 208.195.174.115\(3389\)" occurs 3
action 1.0 mail server "173.16.7.2" to ".[email protected]" from ".eem@company1." subject ".intrusion_alert_from_c2900isr." body "Intrustion alert c2800isr"

Senario maping for sending goods for replacement

Hi All,
We have a senario to be mapped in SAP MM. We are into aircraft maintenence business.
All our air craft are insured from tip to tail. If any of the part the aircraft shows any problem then it will be send to the OEM and shall be replaced by them free of cost.
Only we have to pay the customs duty and the freight amount. How to map the complete tracking of sending the material to vendor and getting the replaced material and booking the custom value for that material.
Regards,
Mohar

You can create purchase order(161 movement) with returns tick to return defective part.
Do goods receipt(MIGO,161 movement).
Create import & freight condition types(M/06) & link it in pricing procedure (M/08).
Configure for purchasing & vendor schema settings.
Add another line item in same p.o for material replaced in same p.o with negligible price to enable
maintaining customs & freight values in respective condition type.
When BOE arrives maintain customs rate in condition types of purchase order.
Do custom invoice by capturing customs rates.
Do goods receipt based on custom MIRO.

JDBC Adapter can be used for sender / receiver for MS Access ?

Hi Experts
   I want to communicate with MS Access by using JDBC sender and receiver
   adapter ? How to set up ?
   Links/screen shots/etc..........
Adv thanx
regards
rakesh

Hi Rakesh ,
>>>> Why the driver is : jdbc:odbc:Driver={Microsoft Access Driver
(*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb ?
if your test data base file is TestDB.mdb you need to give the absolute path of the file to get access to JDBC adapter set so you can replace the file path with the corresponding path on your test system .
Please place the data base file in a directory where the XI system has share access.
Regards,
Nanda

1300 AP times 2? one for send one for receive?

Hello,
i was hoping to increase the speed of the network.
im using a simple setup to bridge two buildiings (see config below).
is it possible to config two AP's on each side to be dedicated - one to send and one to receive?
(with similar setup on the other end).
currently when i send a 100MB file it takes 60 seconds which is poretty crappy for a 54mbps hardware.
the distance is only 600ft between.
using 1310G with build in antennas - would the model with the external antennas give better reception?
thanks!
Building configuration...
Current configuration : 1090 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
hostname 1
no aaa new-model
dot11 ssid abc
authentication open
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid abc
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root bridge
bridge-group 1
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
interface BVI1
ip address 172.16.3.120 255.255.248.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 priority 9000
bridge 1 protocol ieee
bridge 1 route ip
line con 0
login
line vty 0 4
login local
end

Your transfer time doesn't look crappy to me at all.
54Mbps data rate gives 20Mbps real throughput at the very best. 20Mbps means you will transfer 2 to 3 MB in a second, so 100MB will take 50 seconds ... Expected
If you are thinking about buying a second bridge, you're maybe better using 11n bridges. A 1260 could do the job. Put your bridge on the 5ghz and bond channels to 40Mhz, you then have double the throughput and no interference from 802.11b/g. You'll see speeds of over 100 (real) Mbps.
Some people already did 2 bridges side by side on different channels and configuring them in etherchannel but that's a bit funky.
One bridge that would receive and one that would transmit is a concept against the standard itself, you have to receive the ACK to the frame you just sent, you can't rely on another device receiving that.
Nicolas

Setup for sending Receipt for message on opening

When I open an Email message on my computer I wish to send automatically a return message to sender saying your message has been read, how do I do that??

Firefox does not do email, it's a browser only.
What eMail server are you using? If you are using Thunderbird, you can post your question here:
http://support.mozillamessaging.com/en-US/home

Ironport don´t send request to Active Directory

Hi,
We need to configure an exception to allow the network 10.0.53.0/24 not require validation in Ironport WSA. however users of this network must pass through all content filters appropriate according to their AD group.
NOTE: I need that Ironport don´t send request to Active Directory, when users to network 10.0.53.0/24 need go to internet.
regards,
Yerko.

That is correct. This is not possible.
Correct me if I am wrong. It sounds like you do not want Authentication, but still would like to control them using the AD group.
You might want to look into using the Context Directory Agent. With a Context Directory Agent, the agent will scan the Active Directory security logs for logon events. It will build a User-to-IP mapping table. When the users in the 10.0.53.0/24 network access the internet, they will not need to authenticate. The WSA will query the Context Directory Agent and see who is on the IP address. If there is a user, then AD groups can be used. If there is no user, then the user will be a Guest.
The Context Directory Agent runs on CentOS. It will need to be hosted on a dedicated machine, or a virtual machine. The required disk space is 120gb.
-Vance

Maximum retries for sending mail ( java mail api )

Hi,
How can I set the property "maximum retries for sending mail" for my smtp through java mail api ?
Is there any property that I need to set in the Javamail session or any other way out ?
Thanks.

That's a server property. You would set that in your server configuration. JavaMail is for sending and receiving mail, not for controlling mail servers.

Sub: How to send idoc for IW31.

Dear All,
Content: My requirement is to send the idoc for maintanance order- IW31. I found the message type as IORDER. I am not able to use change pointer IORDER is not matching, as i am not able to find the message type, when executing BD21 (for change pointer).
Please let me know the procedure for sending idoc for IW31.

This is what it worked for me, to create an INBOUND IDOC to transaction IW31:
I converted BAPI_ALM_ORDER_MAINTAIN to an IDOC
1) In transaction SWO1 copy model BUS2007A to ZBUS2007A (make sure set the status to implemented Edit->Change Release Status->Object type -> to implemented.
2)In transaction BDBG, check Object type, Object ZBUS2007A, Method ORDERMAINTAIN
you can check
http://help.sap.com/saphelp_nw04/helpdata/en/78/21740f51ce11d189570000e829fbbd/content.htm
I Put in Message type ZORDERMAIN
IDoc Type ZORDERMAIN01
the function name will be: ZIDOC_INPUT_ZORDERMAIN
3) configure transaction BD51
4) Configure transaction WE57
5) Configure transaction WE42
6) and Finally Transaction WE20
In my case it worked, still I modified function ZIDOC_INPUT_ZORDERMAIN, and in the call function to BAPI_ALM_ORDER_MAINTAIN I commented the releationship tables.(They were giving me some errors)
Hope this info will help someone.
Regards

Illustrator keeps quitting-notice others have had similar issues, not resolved-so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help-come on-someon

Illustrator keeps quitting…notice others have had similar issues…so what it the reason for "sending a report" to Adobe if nothing can be done with it????? paying for a product that I can't use when I need to use it and no help…come on…someone has to have an answer…HELP Pleeeeease

<moved from Adobe Creative Cloud to Illustrator>
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50) I tried to do the update but I got an error - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".

I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
== This happened ==
Every time Firefox opened
== When I try to do the update

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

Mapping lookups need to be done for sender or for reciever?

Similar Messages

Maybe you are looking for