Mapping macro dynamics

Hi- I've been trying to find the mapping macro dynamics tool used by Steve Horelick in his Logic 401 Mastering Tutorial ( MacProvideo) tutorial no 24.
He uses it to map-in the dynamic shape of his song in the Arrange window ( audio track) before using automation to actually alter the dynamics - in his tutorial the frame is red, but I suspect the colour can be personally chosen.
This seems like a really neat, time-saving function but I just can't find it ............ ring any bells ?
Thanks, SeaDream

I can do a screen shot of the tutorial, I think, but not sure how to get it here. It'll be JPEG.
He doesn't say where to get it from in that tutorial, he just places the pointer in the lower half of the track and it has a circle with a cross inside and clicks, then he goes up to the top of ther track and does th same and then the red line appears.
I thought it could be the Marquee Tool so I played around with this but couldn't create the same.

Similar Messages

Oracle Audit SMF records (z/OS) / where are the mapping macros for SMAAUD?

hi all,
i'm searching unsuccessfully for the mapping macros describing the SMAAUD field content of the Oracle Audit SMF Records.
does anybody have experience with analyzing the Oracle Audit SMF records?
best regards
stephen

Art,
The external tables are tricky because if you make one trivial mistake when describing the records (such as a wrong field length or type), the end result will be that the query against the FT will return no errors, but there will be zero or some weard number of records returned. I suggest to check again the record description and to try to select from the external table (after it is deployed) from SQL plus.
Also, when configuring the flat file in OWB you can define the log file that will trace FT creation errors during deployment and a Bad file name that will direct the database to write records not fitting into the FT definition to the location specified in 'Bad file name'.
These configuration parameters can be of help when struggling with the issues mentioned above.
Regards:
Igor

LMS 3.2 on Solaris 10 - CatOS PVlan Mapping commands to MSFC not being saved by Ciscoworks

Hi All,
We are doing some troubleshooting after the recovery of a Cat6500 Hybrid switch and we've encoutered something strange. It seems that Ciscoworks does not save the pvlan mapping statements applied to the MSFC (module 15 in this case). Below I have two excerpts. The first one is from an export of the latest saved config of a similar device. The other one is from the actual same switch.
Any ideas why this is happening?
Thanks
Jose Ribeiro
-bash-3.00$ cat ctspitdcemsw303-172-raw.cfg | grep mapping
#Macro-Port mapping
#vlan mapping
set pvlan mapping 2100 2101 1/7
set pvlan mapping 2100 2103 1/7
set pvlan mapping 2100 2104 1/7
set pvlan mapping 2100 2106 1/7
set pvlan mapping 2100 2109 1/7
set pvlan mapping 2600 2603 5/11-12
set pvlan mapping 2600 2604 5/11-12
set pvlan mapping 2800 2801 5/4
set pvlan mapping 2800 2802 5/4
set pvlan mapping 2800 2803 5/4
set pvlan mapping 2800 2804 5/4
set pvlan mapping 2800 2805 5/4
set pvlan mapping 2800 2806 5/4
set pvlan mapping 2800 2807 5/4
set pvlan mapping 2800 2808 5/4
set pvlan mapping 2800 2809 5/4
set pvlan mapping 2300 2303 9/31
set pvlan mapping 2300 2304 9/31
set pvlan mapping 2600 2603 9/28
set pvlan mapping 2600 2604 9/28
-bash-3.00$
ctspitdcemsw303> (enable) sh runn | incl mapping
set pvlan mapping 2100 2101 1/7
set pvlan mapping 2100 2103 1/7
set pvlan mapping 2100 2104 1/7
set pvlan mapping 2100 2106 1/7
set pvlan mapping 2100 2109 1/7
set pvlan mapping 2600 2603 5/11-12
set pvlan mapping 2600 2604 5/11-12
set pvlan mapping 2800 2801 5/4
set pvlan mapping 2800 2802 5/4
set pvlan mapping 2800 2803 5/4
set pvlan mapping 2800 2804 5/4
set pvlan mapping 2800 2805 5/4
set pvlan mapping 2800 2806 5/4
set pvlan mapping 2800 2807 5/4
set pvlan mapping 2800 2808 5/4
set pvlan mapping 2800 2809 5/4
set pvlan mapping 2300 2303 9/31
set pvlan mapping 2300 2304 9/31
set pvlan mapping 2600 2603 9/28
set pvlan mapping 2600 2604 9/28
set pvlan mapping 2300 2303 10/35-36
set pvlan mapping 2300 2304 10/35-36
set pvlan mapping 2300 2305 10/35-36
set pvlan mapping 2300 2309 10/35-36
set pvlan mapping 2300 2303 11/34
set pvlan mapping 2300 2304 11/34
set pvlan mapping 2600 2603 11/12-13,11/38-39
set pvlan mapping 2600 2604 11/12-13,11/38-39
set pvlan mapping 2300 2303 12/45-46
set pvlan mapping 2300 2304 12/45-46
set pvlan mapping 2600 2603 12/41-44
set pvlan mapping 2600 2604 12/41-44
set pvlan mapping 2000 2001 15/1
set pvlan mapping 2000 2002 15/1
set pvlan mapping 2000 2003 15/1
set pvlan mapping 2000 2005 15/1
set pvlan mapping 2000 2009 15/1
set pvlan mapping 2200 2201 15/1
set pvlan mapping 2200 2202 15/1
set pvlan mapping 2200 2203 15/1
set pvlan mapping 2200 2208 15/1
set pvlan mapping 2300 2301 15/1
set pvlan mapping 2300 2302 15/1
set pvlan mapping 2300 2303 15/1
set pvlan mapping 2300 2304 15/1
set pvlan mapping 2300 2305 15/1
set pvlan mapping 2300 2306 15/1
set pvlan mapping 2300 2307 15/1
set pvlan mapping 2300 2309 15/1
set pvlan mapping 2300 2312 15/1
set pvlan mapping 2500 2501 15/1
set pvlan mapping 2500 2503 15/1
set pvlan mapping 2600 2602 15/1
ctspitdcemsw303> (enable)

Hi Joseph,
When I run a write term I can see the whole switch config, though in pages (I need to hit enter several time to go trhu the whole config).
ctspitdcemsw303> (enable) write terminal
This command shows non-default configurations only.
Use 'write terminal all' to show both default and non-default configurations.
begin
# ***** NON-DEFAULT CONFIGURATION *****
#time: Mon May 9 2011, 09:08:46 EDT
#version 8.5(2)
Also a View Config Raw from Device Center shows configuration up to module 10, completely missing modules 11, 12 and 15 (pvlan mappings to the MSFC).
Thanks,
Jose

Probléme dll

Bonjour,
J'ai un probléme avec ma dll
// interact2.cpp //
#include "stdafx.h"
#include "interact2.h"
#include "interact2Dlg.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
extern "C" void __declspec(dllexport) InitInstance();
BOOL APIENTRY DllMain( HANDLE hModule,
                       DWORD ul_reason_for_call,
                       LPVOID lpReserved
    return TRUE;
// CInteract2App
BEGIN_MESSAGE_MAP(CInteract2App, CWinApp)
//{{AFX_MSG_MAP(CInteract2App)
  // NOTE - the ClassWizard will add and remove mapping macros here.
  //    DO NOT EDIT what you see in these blocks of generated code!
//}}AFX_MSG
ON_COMMAND(ID_HELP, CWinApp:nHelp)
END_MESSAGE_MAP()
// CInteract2App construction
CInteract2App::CInteract2App()
// TODO: add construction code here,
// Place all significant initialization in InitInstance
// The one and only CInteract2App object
CInteract2App theApp;
// CInteract2App initialization
BOOL __declspec(dllexport) CInteract2App::InitInstance()
AfxEnableControlContainer();
// Standard initialization
// If you are not using these features and wish to reduce the size
// of your final executable, you should remove from the following
// the specific initialization routines you do not need.
#ifdef _AFXDLL
Enable3dControls();   // Call this when using MFC in a shared DLL
#else
Enable3dControlsStatic(); // Call this when linking to MFC statically
#endif
CInteract2Dlg dlg;
m_pMainWnd = &dlg;
int nResponse = dlg.DoModal();
if (nResponse == IDOK)
  // TODO: Place code here to handle when the dialog is
  // dismissed with OK
else if (nResponse == IDCANCEL)
  // TODO: Place code here to handle when the dialog is
  // dismissed with Cancel
// Since the dialog has been closed, return FALSE so that we exit the
// application, rather than start the application's message pump.
return FALSE;
J'ai donc rajouté ce qui en rouge et j'ai builder en dll ce fichier.cpp
Cependant quand j'appelle cette fonction dans labview (Call librarie function node)
Pourriez vous me dire ou est mon erreur?
Merci

Salut,
J'utilise labview 8.0, je souhaite à partir d'une application Visual C++, retranscrire la plupart des fonctions pour pouvoir communiquer avec un robot.
Le code en c++ fonctionnant avec mon robot, il me semblait plus judicieux de faire des appelle de fonction du code c++ dans labview, comme
par exemple OnInit2() qui permet d'initialiser le robot.
J'envoie le code source, la dll est dans le fichier Source\Debug et se nomme interact2.dll
Je l'ai compilé avec Visual c++
Pouvez vous me dire si ma dll est bien crée? Merci
Pièces jointes :
codesource.zip ‏2552 KB

Best Quality Importing

I am a high-end audio user and would like to know which format should I use to import my high resolution CDs. I shunned MP3 players for a long time because I was told they truncate files to fit and that ultimately sounds horrible upon playback on a killer audio system such as the Levinson I use.
I read "iTunes help" but am still not sure which format (AIFF, WAV, AAC, Apple Lossless) to use for the best reproduced, uncompromised sound. I'm not concerned with disc space as I am with sound. I imported using AAC and I could hear on my car audio system that the bass was bloated and the treble dry. It sucked and that was in my truck using only its decent stock system.
Taking the advice of an Apple salesman, I re-imported a known recording using a WAV format and it was so much better but still not the same as an actual CD in depth and dynamics. (I did a comparo in my truck using the iPod and my CD player). Something is not right here.
Could it be the cable connection to my iPod as I am using the headphone jack to my car audio AUX input? Would using the iPod's docking connection on its bottom to the back of the radio clear this up? I get conflicting advice at the Apple store and a vague answer using iTunes "help."
After using MIT cable for many years, I know cables and their connections make a big difference in sound but at the iPod's level, would this matter?
I don't want to use a custom setting where the computer will add or subtract any info from the recording. I want all of what's on the disc to end up on the iPod, no more no less. I want to get this right before I import the thousand's of songs I have in my library. It would be a drag to have to do it all over again as my Powerbook is as slow as a snail and it is cranky too.

I developed an ear for sound for the years I have been listening. When I fire up my home audio system, there is nothing but smoothness, effortlessness, wide and deep soundstaging, good micro and macro dynamics etc. All combine to a relaxing and involving exerience which becomes mroe obvious after I listening to my iPod.
I have read the compelling arguments for and against certain formats and on paper it might mean they should pass the music on w/o degrading or changing it. I use my ear as a guide. The iPod sounds cupped or hollow. Years ago jitter was the big problem in audio until FIFO (First In First Out) was developed by Levinson. I found that leaving the CD as it is w/o introducing any anomaly upon playback is key. I finesse the cables and components later until it sounds "there."
A few years ago I read an article in Stereophile about a test of the iPod's settings for recording and playback, exactly what we are discussing here. Unfortunately, I cannot remember what settings they recommended but they felt the unit came close to really good sound. It's low price relative to the hideously expensive high end market, compelled the reviewer to give the iPod a higher rating and a recommendation. The reviewer largely used his acute sense of hearing for his critique and compared his results to known equipment in A/B testing. Again I cannot recall what cables and connection he chose, but the iPod has improved since then and so has iTunes software which I felt would solidify my purchase decision toward MP3s.
I went to the Alpine website and found they do not have a cable to support the data link port in the new Classic. So for now, I have to deal with the trippy sounding recordings if the cable is the culprit.
The older the CD medium gets, the more it seems to hold up to newer technologies such as what is inside an iPod. This is ironic because the CD was never originally designed to sound amazing, just to be more convenient over LP. Today, it really does sound good for its paltry 16/44. When I can get them, I purchase only labels like "Telarc" and "Chesky" etc., who are fanatical about the recording process and it really pays off with great sound. That's what I want in my iPod.
It's taken 20+ years to get the big companies to come up with a better sounding disc and I hope not another 20 to fix the iPod.

Dynamics AX schema TrvPBSMaindataService issue with map

I have the following schemas generated by the WSDL from a Dynamics AX web service. The node TrvPBSMaindataServiceCreateRequest is the request which contains TrvPBSMaindata. BizTalk map cannot use the reference, since TrvPBSMaindata has a child node with
the same name. I tried to create a separate schema for TrvPBSMaindata and use it without success. I noticed when you change the elementFormDefault="qualified" to unqualified, you can see the node properly, but it does not add the prefix and
fail in AIF: schema not well formatted. I tired to "inject the prefix using xsl". This is where I am now struggling...any thoughs?
TrvPBSMaindataServiceCreateRequest: PCard_schemas_microsoft_com_dynamics_2008_01_services.xsd
<?xml version="1.0"?>
<xs:schema xmlns:tns="http://schemas.microsoft.com/dynamics/2008/01/services" elementFormDefault="qualified" targetNamespace="http://schemas.microsoft.com/dynamics/2008/01/services"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import schemaLocation=".\PCard_emas_microsoft_com_dynamics_2008_01_documents_TrvPBSMaindata.xsd" namespace="http://schemas.microsoft.com/dynamics/2008/01/documents/TrvPBSMaindata"
/>
<xs:import schemaLocation=".\PCard_hemas_microsoft_com_dynamics_2006_02_documents_EntityKeyList.xsd" namespace="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKeyList"
/>
<xs:element name="TrvPBSMaindataServiceCreateRequest">
    <xs:complexType>
      <xs:sequence>
        <xs:element xmlns:q1="http://schemas.microsoft.com/dynamics/2008/01/documents/TrvPBSMaindata" minOccurs="0"
ref="q1:TrvPBSMaindata" />
      </xs:sequence>
    </xs:complexType>
</xs:element>
<xs:element name="TrvPBSMaindataServiceCreateResponse">
    <xs:complexType>
      <xs:sequence>
        <xs:element xmlns:q2="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKeyList" minOccurs="0"
ref="q2:EntityKeyList" />
      </xs:sequence>
    </xs:complexType>
</xs:element>
</xs:schema>
TrvPBSMaindata: PCard_emas_microsoft_com_dynamics_2008_01_documents_TrvPBSMaindata.xsd
<?xml version="1.0"?>
<xs:schema xmlns:tns="http://schemas.microsoft.com/dynamics/2008/01/documents/TrvPBSMaindata" xmlns:st="http://schemas.microsoft.com/dynamics/2008/01/sharedtypes"
elementFormDefault="qualified" targetNamespace="http://schemas.microsoft.com/dynamics/2008/01/documents/TrvPBSMaindata" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import schemaLocation=".\PCard_schemas_microsoft_com_dynamics_2008_01_sharedtypes.xsd" namespace="http://schemas.microsoft.com/dynamics/2008/01/sharedtypes"
/>
<xs:element name="TrvPBSMaindata" type="tns:AxdTrvPBSMaindata" />
<xs:complexType name="AxdTrvPBSMaindata">
    <xs:sequence>
      <xs:element minOccurs="0" name="ClearNilFieldsOnUpdate" nillable="true" type="st:AxdEnum_boolean" />
      <xs:element minOccurs="0" name="DocPurpose" nillable="true" type="st:AxdEnum_XMLDocPurpose" />
      <xs:element minOccurs="0" name="SenderId" nillable="true" type="st:AxdExtType_DataAreaId" />
      <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvPBSMaindata" type="tns:AxdEntity_TrvPBSMaindata" />
    </xs:sequence>
</xs:complexType>
<xs:complexType name="AxdEntity_TrvPBSMaindata">
    <xs:sequence>
      <xs:element minOccurs="0" name="_DocumentHash" nillable="true" type="xs:string" />
      <xs:element minOccurs="1" name="AmountCurr" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="AmountLocal" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="BusinessName" nillable="true" type="st:AxdExtType_TrvPBSBusinessName" />
      <xs:element minOccurs="0" name="CardNumber" nillable="true" type="st:AxdExtType_TrvCardNumber" />
      <xs:element minOccurs="0" name="CardNumberNIKS" nillable="true" type="st:AxdExtType_TrvCardNumber" />
      <xs:element minOccurs="1" name="CardType" type="st:AxdExtType_TrvCreditCardType" />
      <xs:element minOccurs="0" name="CatCode" nillable="true" type="st:AxdExtType_TrvCatCodeNoEDT" />
      <xs:element minOccurs="0" name="CatCodesDesc" nillable="true" type="st:AxdExtType_TrvCatCodeDescriptionEDT" />
      <xs:element minOccurs="0" name="CCTransUniqueId" nillable="true" type="st:AxdExtType_TrvCCTransUniqueID" />
      <xs:element minOccurs="0" name="Country" nillable="true" type="st:AxdExtType_TrvPbsCountry" />
      <xs:element minOccurs="0" name="DisputeStatus" nillable="true" type="st:AxdExtType_TrvCCDisputeStatus" />
      <xs:element minOccurs="0" name="DisputeTrackingNumber" nillable="true" type="st:AxdExtType_TrvDisputeTrackingNumber" />
      <xs:element minOccurs="1" name="ExchCode" type="st:AxdUnion_AxdExtType_CurrencyCode_AxdType_ExtCodeValue" />
      <xs:element minOccurs="0" name="ExchCodeLocal" nillable="true" type="st:AxdUnion_AxdExtType_CurrencyCode_AxdType_ExtCodeValue" />
      <xs:element minOccurs="0" name="MerchantCategoryCode" nillable="true" type="st:AxdExtType_TrvMerchantCategoryCode" />
      <xs:element minOccurs="0" name="Name" nillable="true" type="st:AxdExtType_Name" />
      <xs:element minOccurs="0" name="Paymethod" nillable="true" type="st:AxdExtType_TrvPayMethodEDT" />
      <xs:element minOccurs="0" name="Reference" nillable="true" type="st:AxdExtType_TrvPBSKey" />
      <xs:element minOccurs="0" name="Town" nillable="true" type="st:AxdExtType_TrvPBSTown" />
      <xs:element minOccurs="1" name="TransDate" type="xs:date" />
      <xs:element minOccurs="0" name="UserField1" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField2" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField3" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField4" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField5" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField6" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField7" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField8" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserField9" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserFieldLong" nillable="true" type="st:AxdExtType_trvPBSUserFieldLong" />
      <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvEnhancedData" type="tns:AxdEntity_TrvEnhancedData_TrvEnhancedData" />
      <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvEnhancedTaxInfo" type="tns:AxdEntity_TrvEnhancedTaxInfo" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedData_TrvEnhancedData">
    <xs:sequence>
      <xs:element minOccurs="0" name="InstanceRelationType" nillable="true" type="st:AxdExtType_RelationType" />
      <xs:element minOccurs="0" name="PBSRecid" nillable="true" type="st:AxdExtType_RefRecId" />
      <xs:element minOccurs="0" name="RecId" nillable="true" type="st:AxdExtType_RecId" />
      <xs:element minOccurs="0" name="RecVersion" nillable="true" type="st:AxdExtType_RecVersion" />
      <xs:element minOccurs="0" name="TransactionRecord" nillable="true" type="st:AxdExtType_RefRecId" />
      <xs:element minOccurs="0" name="UserDefinedField1" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField10" nillable="true" type="st:AxdExtType_trvPBSUserFieldLong" />
      <xs:element minOccurs="0" name="UserDefinedField2" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField3" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField4" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField5" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField6" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField7" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField8" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField9" nillable="true" type="st:AxdExtType_trvPBSUserField" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedData_TrvEnhancedHotelData">
    <xs:complexContent mixed="false">
      <xs:extension base="tns:AxdEntity_TrvEnhancedData_TrvEnhancedData">
        <xs:sequence>
          <xs:element minOccurs="0" name="CheckInDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="CheckOutDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="FolioNumber" nillable="true" type="st:AxdExtType_TrvFolioNumber" />
          <xs:element minOccurs="0" name="GuestName" nillable="true" type="st:AxdExtType_TrvGuestName" />
          <xs:element minOccurs="0" name="GuestNumber" nillable="true" type="st:AxdExtType_TrvGuestNumber" />
          <xs:element minOccurs="0" name="NoShowIndicator" nillable="true" type="st:AxdEnum_NoYes" />
          <xs:element minOccurs="0" name="TotalRoomNights" nillable="true" type="st:AxdExtType_TrvNumberOfNights" />
          <xs:element minOccurs="0" name="TotalRoomRent" nillable="true" type="st:AxdExtType_AmountCur" />
          <xs:element minOccurs="0" name="TotalTaxAmount" nillable="true" type="st:AxdExtType_TaxAmountJournal" />
          <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvHotelCharge" type="tns:AxdEntity_TrvHotelCharge" />
        </xs:sequence>
      </xs:extension>
    </xs:complexContent>
</xs:complexType>
<xs:complexType name="AxdEntity_TrvHotelCharge">
    <xs:sequence>
      <xs:element minOccurs="0" name="ChargeAmount" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="1" name="ChargeType" type="st:AxdEnum_TrvHotelChargeType" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedData_TrvEnhancedItineraryData">
    <xs:complexContent mixed="false">
      <xs:extension base="tns:AxdEntity_TrvEnhancedData_TrvEnhancedData">
        <xs:sequence>
          <xs:element minOccurs="0" name="DepartureDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="DomesticIndicator" nillable="true" type="st:AxdEnum_NoYes" />
          <xs:element minOccurs="0" name="ExchangeTicketNumber" nillable="true" type="st:AxdExtType_TrvTicketNumber" />
          <xs:element minOccurs="0" name="IssuingCarrier" nillable="true" type="st:AxdExtType_TrvIssuingCarrier" />
          <xs:element minOccurs="0" name="NumberOfLegs" nillable="true" type="st:AxdExtType_TrvNumberOfLegs" />
          <xs:element minOccurs="0" name="OriginalTicketNumber" nillable="true" type="st:AxdExtType_TrvTicketNumber" />
          <xs:element minOccurs="0" name="PassengerName" nillable="true" type="st:AxdExtType_TrvName" />
          <xs:element minOccurs="0" name="TicketIssueDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="TravelAgencyCode" nillable="true" type="st:AxdExtType_TrvTravelAgencyCode" />
          <xs:element minOccurs="0" name="TravelAgencyInvoiceNumber" nillable="true" type="st:AxdExtType_TrvTravelAgencyInvoiceNumber" />
          <xs:element minOccurs="0" name="TravelAgencyName" nillable="true" type="st:AxdExtType_TrvName" />
          <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvEnhancedTripLegDetail" type="tns:AxdEntity_TrvEnhancedTripLegDetail" />
          <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvItineraryCharge" type="tns:AxdEntity_TrvItineraryCharge" />
        </xs:sequence>
      </xs:extension>
    </xs:complexContent>
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedTripLegDetail">
    <xs:sequence>
      <xs:element minOccurs="0" name="ArrivalDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
      <xs:element minOccurs="0" name="CarrierCode" nillable="true" type="st:AxdExtType_TrvCarrierCode" />
      <xs:element minOccurs="0" name="CityOfOrigin" nillable="true" type="st:AxdExtType_TrvCity" />
      <xs:element minOccurs="0" name="DepartureTax" nillable="true" type="st:AxdExtType_TaxAmountJournal" />
      <xs:element minOccurs="0" name="DestinationCity" nillable="true" type="st:AxdExtType_TrvCity" />
      <xs:element minOccurs="0" name="FareAmount" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="FeeAmount" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="FlightNumber" nillable="true" type="st:AxdExtType_TrvFlightNumber" />
      <xs:element minOccurs="0" name="ServiceClass" nillable="true" type="st:AxdExtType_TrvAirlineServiceClass" />
      <xs:element minOccurs="0" name="StopOverCity" nillable="true" type="st:AxdExtType_TrvCity" />
      <xs:element minOccurs="0" name="TaxAmount" nillable="true" type="st:AxdExtType_TaxAmountJournal" />
      <xs:element minOccurs="0" name="TravelDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
      <xs:element minOccurs="0" name="TripLegNumber" nillable="true" type="st:AxdExtType_TrvTripLegNumber" />
      <xs:element minOccurs="0" name="UserDefinedField1" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField10" nillable="true" type="st:AxdExtType_trvPBSUserFieldLong" />
      <xs:element minOccurs="0" name="UserDefinedField2" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField3" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField4" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField5" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField6" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField7" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField8" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField9" nillable="true" type="st:AxdExtType_trvPBSUserField" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvItineraryCharge">
    <xs:sequence>
      <xs:element minOccurs="0" name="ChargeAmount" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="ChargeType" nillable="true" type="st:AxdEnum_TrvAirlineChargeType" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedData_TrvEnhancedCarRentalData">
    <xs:complexContent mixed="false">
      <xs:extension base="tns:AxdEntity_TrvEnhancedData_TrvEnhancedData">
        <xs:sequence>
          <xs:element minOccurs="0" name="CarRentalCheckOutDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="CheckOutLocation" nillable="true" type="st:AxdExtType_TrvRentalLocation" />
          <xs:element minOccurs="0" name="DailyRentalRate" nillable="true" type="st:AxdExtType_AmountCur" />
          <xs:element minOccurs="0" name="DaysRented" nillable="true" type="st:AxdExtType_TrvDaysRented" />
          <xs:element minOccurs="0" name="MonthlyRentalRate" nillable="true" type="st:AxdExtType_AmountCur" />
          <xs:element minOccurs="0" name="RegularMileageCharges" nillable="true" type="st:AxdExtType_AmountCur" />
          <xs:element minOccurs="0" name="RenterName" nillable="true" type="st:AxdExtType_TrvName" />
          <xs:element minOccurs="0" name="ReservationNumber" nillable="true" type="st:AxdExtType_TrvRentalReservationNumber" />
          <xs:element minOccurs="0" name="ReturnDate" nillable="true" type="st:AxdExtType_TrvTransDate" />
          <xs:element minOccurs="0" name="ReturnLocation" nillable="true" type="st:AxdExtType_TrvRentalLocation" />
          <xs:element minOccurs="0" name="TotalMiles" nillable="true" type="st:AxdExtType_TrvMileage" />
          <xs:element minOccurs="0" name="VehicleClass" nillable="true" type="st:AxdExtType_TrvCarRentalVehicleClass" />
          <xs:element minOccurs="0" name="WeeklyRentalRate" nillable="true" type="st:AxdExtType_AmountCur" />
          <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvCarRentalCharge" type="tns:AxdEntity_TrvCarRentalCharge" />
        </xs:sequence>
      </xs:extension>
    </xs:complexContent>
</xs:complexType>
<xs:complexType name="AxdEntity_TrvCarRentalCharge">
    <xs:sequence>
      <xs:element minOccurs="0" name="ChargeAmount" nillable="true" type="st:AxdExtType_AmountCur" />
      <xs:element minOccurs="0" name="ChargeType" nillable="true" type="st:AxdEnum_TrvCarRentalChargeType" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvEnhancedTaxInfo">
    <xs:sequence>
      <xs:element minOccurs="0" name="CustomerVATNumber" nillable="true" type="st:AxdExtType_TrvVATNumber" />
      <xs:element minOccurs="0" name="IsGSTHSTIncludedInAmount" nillable="true" type="st:AxdEnum_NoYes" />
      <xs:element minOccurs="0" name="IsSalesTaxIncludedInAmount" nillable="true" type="st:AxdEnum_NoYes" />
      <xs:element minOccurs="0" name="ItemSalesTaxGroup" nillable="true" type="st:AxdExtType_TrvItemSalesTaxGroup" />
      <xs:element minOccurs="0" name="SalesTaxGroup" nillable="true" type="st:AxdExtType_TrvSalesTaxGroup" />
      <xs:element minOccurs="0" name="SupplierVATNumber" nillable="true" type="st:AxdExtType_TrvVATNumber" />
      <xs:element minOccurs="0" name="TotalSalesTaxAmount" nillable="true" type="st:AxdExtType_TaxAmountJournal" />
      <xs:element minOccurs="0" name="UserDefinedField1" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField2" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField3" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField4" nillable="true" type="st:AxdExtType_trvPBSUserField" />
      <xs:element minOccurs="0" name="UserDefinedField5" nillable="true" type="st:AxdExtType_trvPBSUserFieldLong" />
      <xs:element minOccurs="0" maxOccurs="unbounded" name="TrvTaxCharge" type="tns:AxdEntity_TrvTaxCharge" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
<xs:complexType name="AxdEntity_TrvTaxCharge">
    <xs:sequence>
      <xs:element minOccurs="1" name="TaxAmount" type="st:AxdExtType_TaxAmountJournal" />
      <xs:element minOccurs="1" name="TaxType" type="st:AxdEnum_TrvTaxType" />
    </xs:sequence>
    <xs:attribute fixed="entity" name="class" use="required" />
    <xs:attribute name="action" type="st:AxdEnum_AxdEntityAction" />
</xs:complexType>
</xs:schema>
PCard_hemas_microsoft_com_dynamics_2006_02_documents_EntityKeyList.xsd
<?xml version="1.0"?>
<xsd:schema xmlns:ek="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKey" xmlns:tns="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKeyList"
elementFormDefault="qualified" targetNamespace="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKeyList" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:import schemaLocation=".\PCard_schemas_microsoft_com_dynamics_2006_02_documents_EntityKey.xsd" namespace="http://schemas.microsoft.com/dynamics/2006/02/documents/EntityKey"
/>
<xsd:element name="EntityKeyList" type="tns:EntityKeyList" />
<xsd:complexType name="EntityKeyList">
    <xsd:sequence>
      <xsd:element minOccurs="0" maxOccurs="unbounded" ref="ek:EntityKey" />
    </xsd:sequence>
</xsd:complexType>
</xsd:schema>
stm1886

>> I noticed when you change the elementFormDefault="qualified" to unqualified, you can see the node properly, but it does not add the prefix and fail in AIF: schema not well formatted. I tired to "inject the prefix using
xsl".
Can you provide any other hints for this problem?

Map F1 Key in Microsoft Dynamics NAV 2013 R2

Hello Support,How to Program/Map F1 Key in Intermec Handheld device(CK3R) in Microsoft Dynamics NAV 2013 R2. I just attached mapping file. Can you help me out. Regards, Kanthavel Ramachandran | MS Dynamics NAV Support Implementerwww.scsdynamics.com | [email protected] 330 N. Brand Blvd., Suite 870Glendale, CA 91203
Office: 310.315.9660Direct: 310.953.9179Cell: 408-431-2163

Hello RizaGrace,
Thank you for your Interest in Azure.
1. What exactly do you mean when you say 'best storage option', do you mean where will the Microsoft Dynamics NAV Server instances reside?
There are two topologies of deploying Dynamics NAV on Azure. You can refer to this article that will give you information on 'Network Topologies for Microsoft Dynamics NAV on Windows Azure':
http://msdn.microsoft.com/en-us/library/dn168979(v=nav.70).aspx
Also refer to the article that wil give you inforamtion on 'Planning and Preparing for Deploying on Windows Azure':
http://msdn.microsoft.com/en-us/library/dn168978(v=nav.70).aspx
These are the example scripts for Deploying Microsoft Dynamics NAV on Windows Azure:
http://msdn.microsoft.com/en-us/library/dn168991(v=nav.70).aspx
I hope that this information is helpful. Please feel free to get back if you have any related questions.
Thanks,
Syed Irfan Hussain

Creating a macro for export to excel using a custom map

Hi all
I've created a custom map to export a custom table to excel, which works. Then tried to create a macro to do this export for me and it was stopped on the 'File; Save As' part of the export (almost the very beginning)
Looking for suggestions for best practises or anything to watch out for when creating a macro to export (or any help in general in this area...books, etc)
Using MSP 2010 (Pro)...we have server but I was attempting this as a stand-alone project
Thanks in advance for your response
Shelleyb MCTS

Firstly make sure you have SP2 installed. Then try recording a macro of you manually saving to Excel with a pre-saved map. Compare the recorded code and your code.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Ms word Macro to extract Great Plains Dynamics CRM 2015 Data

Hello,
I have a macro in MS Word that I am trying to use from a remote server (URL)
How do I reconfigure my datasource to utilize a url such as:
http://555.555.00.000/ABCCRM/main.aspx#960021546
Sub LoadOpportunityList()
' LoadOpportunityList Macro
    Set opportunityList = ActiveDocument.SelectContentControlsByTitle("OpportunityNumber").Item(1)
    Dim cnn As New ADODB.Connection
    Dim rst As New ADODB.Recordset
    cnn.Open "Provider=SQLOLEDB;" & _
"Data Source=ABCCRM\DB1;" & _
"Initial Catalog=ABC_MSCRM;" & _
"User Id=sa;" & _
"Password=abc123"
    rst.Open "SELECT DISTINCT ws_opportunitynumber FROM Opportunity WHERE ws_opportunitynumber IS NOT NULL AND StateCode = 0 AND StepName = '2 - Estimating' Order By ws_opportunitynumber;",
cnn, adOpenStatic
    rst.MoveFirst
    With ActiveDocument.SelectContentControlsByTitle("OpportunityNumber").Item(1).DropdownListEntries
.Clear
Do
.Add rst![ws_opportunitynumber]
rst.MoveNext
Loop Until rst.EOF
    End With
    rst.Close
    cnn.Close
    Set rst = Nothing
    Set cnn = Nothing
End Sub
Sub LoadOpportunityDetails()
' LoadOpportunityDetails Macro
    Set opportunityList = ActiveDocument.SelectContentControlsByTitle("OpportunityNumber").Item(1)
    Call GetOpportunityDetails(opportunityList.Range.Text)
End Sub
Private Sub GetOpportunityDetails(OpportunityName As String)
    Dim cnn As New ADODB.Connection
    Dim rst As New ADODB.Recordset
    cnn.Open "Provider=SQLOLEDB;" & _
"Data Source=Server1\DB1;" & _
"Initial Catalog=ABC_MSCRM;" & _
"User Id=sa;" & _
"Password=abc123"
     rst.Open "SELECT TOP 1 * FROM WS_PROPOSALDATA Where ws_opportunitynumber ='" & OpportunityName & "';", _
cnn, adOpenStatic
'    rst.Open "SELECT TOP 1 Address1_Street1, Address1_Street2 FROM OpportunityBase Where Name ='" & OpportunityName & "';", _
cnn, adOpenStatic
    rst.MoveFirst
    Set proposaldate = ActiveDocument.SelectContentControlsByTitle("ProposalDate").Item(1)
    Set projecttype = ActiveDocument.SelectContentControlsByTitle("ProjectType").Item(1)
    Set projectname = ActiveDocument.SelectContentControlsByTitle("ProjectName").Item(1)
    Set opportunitycontact = ActiveDocument.SelectContentControlsByTitle("OpportunityContact").Item(1)
    Set customerquoteto = ActiveDocument.SelectContentControlsByTitle("CustomerQuoteTo").Item(1)
    Set quotetoaddress1 = ActiveDocument.SelectContentControlsByTitle("QuoteToAddress1").Item(1)
    Set quotetoaddress2 = ActiveDocument.SelectContentControlsByTitle("QuoteToAddress2").Item(1)
    Set quotetocity = ActiveDocument.SelectContentControlsByTitle("QuoteToCity").Item(1)
    Set quotetostate = ActiveDocument.SelectContentControlsByTitle("QuoteToState").Item(1)
    Set quotetozip = ActiveDocument.SelectContentControlsByTitle("QuoteToZIP").Item(1)
    Set billtocustomer = ActiveDocument.SelectContentControlsByTitle("BillToCustomer").Item(1)
'   Set billtoaddress1 = ActiveDocument.SelectContentControlsByTitle("BillToAddress1").Item(1)
'   Set billtoaddress2 = ActiveDocument.SelectContentControlsByTitle("BillToAddress2").Item(1)
'   Set billtocity = ActiveDocument.SelectContentControlsByTitle("BillToCity").Item(1)
'   Set billtostate = ActiveDocument.SelectContentControlsByTitle("BillToState").Item(1)
'   Set billtozip = ActiveDocument.SelectContentControlsByTitle("BillToZIP").Item(1)
    Set locationcustomer = ActiveDocument.SelectContentControlsByTitle("LocationCustomer").Item(1)
    Set locationaddress1 = ActiveDocument.SelectContentControlsByTitle("LocationAddress1").Item(1)
    Set locationaddress2 = ActiveDocument.SelectContentControlsByTitle("LocationAddress2").Item(1)
    Set locationcity = ActiveDocument.SelectContentControlsByTitle("LocationCity").Item(1)
    Set locationstate = ActiveDocument.SelectContentControlsByTitle("LocationState").Item(1)
   Set locationzip = ActiveDocument.SelectContentControlsByTitle("LocationZIP").Item(1)
    Set contactname = ActiveDocument.SelectContentControlsByTitle("ContactName").Item(1)
    Set contactemail = ActiveDocument.SelectContentControlsByTitle("ContactEmail").Item(1)
    Set contactphone = ActiveDocument.SelectContentControlsByTitle("ContactPhone").Item(1)
    Set servicemgrname = ActiveDocument.SelectContentControlsByTitle("ServiceMgrName").Item(1)
    Set servicemgremail = ActiveDocument.SelectContentControlsByTitle("ServiceMgrEmail").Item(1)
    Set servicemgrphone = ActiveDocument.SelectContentControlsByTitle("ServiceMgrPhone").Item(1)
    Set customerservicename = ActiveDocument.SelectContentControlsByTitle("CustomerServiceName").Item(1)
    Set customerserviceemail = ActiveDocument.SelectContentControlsByTitle("CustomerServiceEmail").Item(1)
    Set customerservicephone = ActiveDocument.SelectContentControlsByTitle("CustomerServicePhone").Item(1)
    Set technicianname = ActiveDocument.SelectContentControlsByTitle("TechnicianName").Item(1)
    Set technicianemail = ActiveDocument.SelectContentControlsByTitle("TechnicianEmail").Item(1)
    Set technicianphone = ActiveDocument.SelectContentControlsByTitle("TechnicianPhone").Item(1)
    Set Location = ActiveDocument.SelectContentControlsByTitle("Location").Item(1)
    Set ProposalNumber = ActiveDocument.SelectContentControlsByTitle("ProposalNumber").Item(1)
    proposaldate.Range.Text = rst![ws_proposaldate]
    projecttype.Range.Text = rst![ws_bidtype]
    projectname.Range.Text = rst![Name]
    opportunitycontact.Range.Text = rst![ws_endcustomercontactidname]
    customerquoteto.Range.Text = rst![QuotedToName]
    quotetoaddress1.Range.Text = rst![QuotedToaddress1_line1]
    quotetoaddress2.Range.Text = rst![QuotedToaddress1_line2]
    quotetocity.Range.Text = rst![QuotedToaddress1_city]
    quotetostate.Range.Text = rst![QuotedToaddress1_stateorprovince]
    quotetozip.Range.Text = rst![QuotedToaddress1_postalcode]
    billtocustomer.Range.Text = rst![BillToName]
'   billtoaddress1.Range.Text = rst![BillToaddress1_line1]
'   billtoaddress2.Range.Text = rst![BillToaddress1_line2]
'   billtocity.Range.Text = rst![BillToaddress1_city]
'   billtostate.Range.Text = rst![BillToaddress1_stateorprovince]
'   billtozip.Range.Text = rst![BillToaddress1_postalcode]
    locationcustomer.Range.Text = rst![Location]
    locationaddress1.Range.Text = rst![ws_Address1]
    locationaddress2.Range.Text = rst![ws_Address2]
    locationcity.Range.Text = rst![ws_Addresscity]
    locationstate.Range.Text = rst![ws_Addressstate]
    locationzip.Range.Text = rst![ws_AddressZip]
    contactname.Range.Text = rst![MaintenanceSalesRepfullname]
    contactemail.Range.Text = rst![MaintenanceSalesRepemailaddress1]
    contactphone.Range.Text = rst![MaintenanceSalesReptelephone1]
    servicemgrname.Range.Text = rst![AreaServiceManagerfullname]
    servicemgremail.Range.Text = rst![AreaServiceManageremailaddress1]
    servicemgrphone.Range.Text = rst![AreaServiceManagertelephone1]
    customerservicename.Range.Text = rst![CustomerServiceRepfullname]
    customerserviceemail.Range.Text = rst![CustomerServiceRepemailaddress1]
    customerservicephone.Range.Text = rst![CustomerServiceReptelephone1]
    technicianname.Range.Text = rst![Technicianfullname]
    technicianemail.Range.Text = rst![Technicianemailaddress1]
    technicianphone.Range.Text = rst![Techniciantelephone1]
    Location.Range.Text = rst![Location]
    ProposalNumber.Range.Text = rst![ProposalNumber]
'    Set street1 = ActiveDocument.SelectContentControlsByTitle("Address1").Item(1)
'    Set street2 = ActiveDocument.SelectContentControlsByTitle("Address2").Item(1)
'    street1.Range.Text = rst![Address1_Street1]
'    street2.Range.Text = rst![Address1_Street2]
    rst.Close
    cnn.Close
    Set rst = Nothing
    Set cnn = Nothing
End Sub
John

Hi,
    Use the config file in your project as explained below.
https://msdn.microsoft.com/en-us/library/16e74h9c.aspx?f=255&MSPPError=-2147217396
Hope this helps.
Minal Dahiya
blog : http://minaldahiya.blogspot.com.au/
If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

How does the .h file macro map to CVICALLBACK control parameter?

I created 8 command buttons and created same callback for all the buttons. Also have a 2x4 array initialized to value of 1. When user clicks any button the 2x4 array value should change to 0 (as command button does not change value to 1 when selected). In order to fill the array I thought of using control from CVICALLBACK.
int ctr_btns[2][4] = {{1,1,1,1},
{1,1,1,1}};
int CVICALLBACK Button_cb (int panel, int control, int event,
void *callbackData, int eventData1, int eventData2)
int row = -1;
int val = 1;
switch (event)
case EVENT_COMMIT:
GetCtrlVal (panelHandle, control, &val);
if(control >= 2 && control <= 5)
row = 0;
else if(control >= 6 && control <= 9)
row = 1;
else if(control >= 10 && control <= 13)
row = 2;
else
row = 3;
ctr_btns[row][control] = val;
break;
The issue is that even after I changed the #define value of the control in .h file, it does not uses the defined value. Where is the control parameter value coming from?
TIA.
CLD,CTD
Solved!
Go to Solution.

Hi, this is a common isue that has been discussed several times on the forums and does not have a fast response.
First of all, you should not modify the include file associated to the UIR file, as stated on top of it, since the system automatically regenerates it every time it saves the UIR. Additionally, the ID assigned to the controls depends on the tab order you define on the panel, so it is subject to change. FYI, this is a discussion on this subject that you may want to read: as you can see, it originates from a question very similar to yours.
Despite what I have said, control IDs actually can be used to discriminate between controls, so in your situation, and provided the buttons are assigned a progressive ID with the tab editor (Ctrl+T on the panel and assign the IDs clicking on the controls), your code could be rewritten this way:
if(control >= PANEL_BUTTON1 && control <= PANEL_BUTTON4)
row = 0;
else if(control >= PANEL_BUTTON5 && control <= PANEL_BUTTON8)
row = 1;
else if(control >= PANEL_BUTTON9 && control <= PANEL_BUTTON12)
row = 2;
else
row = 3;
For the same reason, you cannot use 'control' as an index on the array, as you have no possibility to foreseen the ID value. That is, even if rewritten the way I told you, that code is not likely to work...
In my opinion the correct way of discriminating between controls is to add a switch inside the callback:
switch (control) {
case PANEL_BUTTON1: ctr_btns[0][0] = 1; break;
case PANEL_BUTTON2: ctr_btns[0][1] = 1; break;
case PANEL_BUTTON5: ctr_btns[1][0] = 1; break;
( but you should create a 4x4 array of values).
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Is it possible to define macros for Safari 6?

I'd like to define a macro that will do the following in Safari 6 (1) remove all cookies, (2) delete the history and (3) empty the cache. I'd like to run this macro at any time when Safari is open. Is it possible to automate this?

Where is the value of that variable coming from?
The simplest way to implement a global variable in a database is to create a table that stores the value and have all the code reference that value.
INSERT INTO tab2( x1, x2, x3, y )
SELECT tab1.x1, tab1.x2, tab1.x3, global_variable_table.VARIABLE
    FROM tab1, global_variable_table
WHERE <<some condition>>
You can also create session-level variables using either package variables or session contexts, though that may cause a few problems for three tier applications that don't cleanly map user sessions to database sessions.
INSERT INTO tab2( x1, x2, x3, y )
SELECT tab1.x1, tab1.x2, tab1.x3, SYS_CONTEXT( 'MY_CONTEXT', 'MY_VARIABLE' )
    FROM tab1
WHERE <<some condition>>or
INSERT INTO tab2( x1, x2, x3, y )
SELECT tab1.x1, tab1.x2, tab1.x3, pkg_variables.get_variable_y()
    FROM tab1
WHERE <<some condition>>Justin

MS dynamics crm 2011 edit xml of chart to get count of Won vs ALL opportunities

Dear Support Team,
We are currently working on a dashboard for our on-premise CRM dynamics 2011 instance. What we need is to display Won VS ALL opportunities of a certain account manager. I have tried exporting one of the default chart in CRM which is the Won Deals VS Lost
Deals. I have modified the XML to get the COUNT of opportunity number for WON and LOST deals instead of the SUM of revenue. Now, i have imported the modified xml content and was able to import it successfully. Upon checking the chart data, it shows the
same count for WON and LOST records which is incorrect. How do i able to correct this. Please refer below to the xml codes i have imported. Looking forward to any help. Thank you.
<visualization>
<visualizationid>{7842C8AF-0FD2-E411-9758-F5ACB647B220}</visualizationid>
<name>Test Chart For Comparison</name>
<description>Shows the amount of revenue for won deals versus lost deals.</description>
<primaryentitytypecode>opportunity</primaryentitytypecode>
<datadescription>
<datadefinition>
<fetchcollection>
<fetch mapping="logical" aggregate="true">
<entity name="opportunity">
<link-entity name="opportunity" from="opportunityid" to="opportunityid" link-type="outer">
<attribute alias="sum_lost" name="opportunityid" aggregate="count" />
<filter>
<condition attribute="statecode" operator="eq" value="0" />
</filter>
</link-entity>
<link-entity name="opportunity" from="opportunityid" to="opportunityid" link-type="outer">
<attribute alias="sum_won" name="opportunityid" aggregate="count" />
<filter>
<condition attribute="statecode" operator="eq" value="1" />
</filter>
</link-entity>
<attribute groupby="true" alias="groupby_column" name="nexus_accountmanager_lookup" />
</entity>
</fetch>
</fetchcollection>
<categorycollection>
<category>
<measurecollection>
<measure alias="sum_won" />
</measurecollection>
<measurecollection>
<measure alias="sum_lost" />
</measurecollection>
</category>
</categorycollection>
</datadefinition>
</datadescription>
<presentationdescription>
<Chart Palette="None" PaletteCustomColors="97,142,206; 168,203,104; 209,98,96; 142,116,178; 93,186,215; 255,155,83; 148,172,215; 217,148,147; 189,213,151; 173,158,196; 145,201,221; 255,180,138">
<Series>
<Series Name="opportunity_statecode,1" Color="149, 189, 66" IsValueShownAsLabel="False" BackGradientStyle="TopBottom" BackSecondaryColor="112, 142, 50" Font="{0}, 9.5px"
LabelForeColor="59, 59, 59">
<SmartLabelStyle Enabled="True" />
</Series>
<Series Name="opportunity_statecode,2" Color="255,124,31" IsValueShownAsLabel="False" BackGradientStyle="TopBottom" BackSecondaryColor="235,98,0" Font="{0}, 9.5px" LabelForeColor="59,
59, 59">
<SmartLabelStyle Enabled="True" />
</Series>
</Series>
<ChartAreas>
<ChartArea BorderColor="White" BorderDashStyle="Solid">
<AxisY LabelAutoFitMinFontSize="8" TitleForeColor="59, 59, 59" TitleFont="{0}, 10.5px" LineColor="165, 172, 181">
<MajorGrid LineColor="239, 242, 246" />
<MajorTickMark LineColor="165, 172, 181" />
<LabelStyle Font="{0}, 10.5px" ForeColor="59, 59, 59" />
</AxisY>
<AxisX LabelAutoFitMinFontSize="8" TitleForeColor="59, 59, 59" TitleFont="{0}, 10.5px" LineColor="165, 172, 181">
<MajorGrid Enabled="False" />
<MajorTickMark Enabled="False" />
<LabelStyle Font="{0}, 10.5px" ForeColor="59, 59, 59" />
</AxisX>
</ChartArea>
</ChartAreas>
<Titles>
<Title Alignment="TopLeft" DockingOffset="-3" Font="{0}, 13px" ForeColor="0, 0, 0" />
</Titles>
<Legends>
<Legend Alignment="Center" LegendStyle="Table" Docking="Bottom" Font="{0}, 11px" ForeColor="59, 59, 59" />
</Legends>
</Chart>
</presentationdescription>
<isdefault>false</isdefault>
</visualization>
Best regards,
Honey Dulatre

You'll need to create a filter for each of your two series in the xml.
This blog post describes the process
for filtering invididual series within the chart xml.
Ulrik,
Blog: http://crmchartguy.wordpress.com - Exclusively for MS CRM Charts
Twitter: crmchartguy

Read Filename form Adapter-Specific Message Attributes in Java Mapping

Hi,
I have scenario File to Mail adapter. How can i read filename from Adapter-Specific Message Attributes
in java mapping.
Thank you and Best regards
Fernand

Hello Fernand,
Are u using DOM or SAX parser?
In any case just put the Dynamic config code in the execute function or the other option is to define it as a private functionand call it in the execute,My personal advice would be the former.
Just put this code in ur java mapping
As fellow sdn ers have mentioned there is no need of the container method,just initialise the set param method and use it in the dynamice config code as follows
public class YourClass implements StreamTransformation
     private Map map;
public void setParameter(Map param)
     map = param;
public void execute(InputStream in, OutputStream out) throws StreamTransformationException
               DynamicConfiguration conf =(DynamicConfiguration) map.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey KEY_FILENAME =DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// read value
File = conf.get(KEY_FILENAME);
Now just call File in the mapping program,
Should help u out
Regards,
Tauseef

Bing "Map It" not showing up in any window accept when imputing a contact for the first time

Bing's "Map It" function that is supposed to be present in office 2013 through emails is not... ive tried many different tests trying to input the addresses in different formats and there is no ability to get a map to the location. Maybe i am
just missing something? Also i was wondering if there is a way to get the "map it" function to work through the calender? It would be ideal if i could pull maps up when looking at an event that i have scheduled (all my events include the address
of each job as they are scheduled jobs for my employees).

bing maps link only displays in Outlook 2013 (or OWA) if an address is detected in the message. This only works if you have an Exchange 2013 email account.
Map it button is in contacts and works with all accounts.
If you want to have a map link in the calendar, you need to use VBA. I have a sample macro at
http://www.slipstick.com/developer/use-vba-to-map-a-contacts-address/ that maps contacts using different services. It could easily be changed to map appointments (which i think
i will do next).
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Trouble sending messages to Dynamics AX: Element is not declared.

I'm having problems getting Dynamics AX to accept a message from BizTalk.
Here's my setup:
AX 2012:
A table, BTAIF_test, with two fields ("Name" and "Phone").
A query, BTAIFQuery, with BTAIF_test as datasource.
A service, BTAIFQueryService, autogenerated by the AX AIF Wizard, registered and deployed on
An inbound port, BTAIF, using net.tcp.
BizTalk:
An incoming schema, generated from a simple XML file containing a name and a phone number.
An outgoing schema, generated by the Consume WCF Service wizard.
A map, mapping the two value fields from the incoming to the outgoing schema.
A receive port, using a receive location with FILE transport to pick up the incoming message, and using XMLReceive pipeline
A send port, using the previously mentioned map, and WCF-NetTcp configured with my AX service address and a simple soap header pointing at the create method of the service. It uses the XMLTransmit pipeline.
When I drop a message in the receive location I get the following message in the Exception log of AX:
"Invalid document schema. The following error was returned:
The 'http://schemas.microsoft.com/dynamics/2008/01/documents/BTAIFQuery:BTAIFtest_1' element is not declared."
The send port has a backup FILE transport, and this is what the message looks like when it dumps it there:
<?xml version="1.0" encoding="utf-8"?>
<ns0:BTAIFQuery xmlns:ns0="http://schemas.microsoft.com/dynamics/2008/01/documents/BTAIFQuery"
xmlns:st="http://schemas.microsoft.com/dynamics/2008/01/sharedtypes">
<ns0:BTAIFtest_1 class="entity">
<ns0:Name>John Hancock</ns0:Name>
<ns0:Phone>555-123-4567</ns0:Phone>
</ns0:BTAIFtest_1>
</ns0:BTAIFQuery>
Any pointers as to what I'm doing wrong here? I've been searching for information on the net and either nobody's doing this or it's so easy nobody cares to write about it. I'm hoping it's the latter and I'm just making some stupid mistake.

From the above output I think the AxdExtType_Name, AxdExtType_Phone and AxdEnum_AxdEntityAction are defined as simple type in BTAIF_schemas_microsoft_com_dynamics_2008_01_sharedtypes.xsd, so the above output is correct as per this schema. Recheck if the
format of schema is correct so that AX can accept it.
Yes, they're defined as simple types, here's the relevant definitions from sharedtypes.xsd:
<xs:simpleType name="AxdExtType_Name">
<xs:annotation>
<xs:documentation xml:lang="EN-US">Name:Name.</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:minLength value="0" />
<xs:maxLength value="60" />
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="AxdExtType_Phone">
<xs:annotation>
<xs:documentation xml:lang="EN-US">Telephone:Telephone number.</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:minLength value="0" />
<xs:maxLength value="20" />
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="AxdEnum_AxdEntityAction">
<xs:annotation>
<xs:documentation xml:lang="EN-US">AxdEntityAction:AxdEntityAction</xs:documentation>
</xs:annotation>
<xs:restriction base="xs:string">
<xs:enumeration value="create" />
<xs:enumeration value="update" />
<xs:enumeration value="replace" />
<xs:enumeration value="delete" />
</xs:restriction>
</xs:simpleType>
This schema and the destination schemas are auto-generated by BizTalk's Consume WCF Service
wizard.

Mapping macro dynamics

Similar Messages

Maybe you are looking for