Mapping MDS Characteristics to KM Properties through DMS Connector

Does anyone who who to map individual characteristics attached to a document in DMS to properties in KM using the DMS Connector for KM?
Installing the DMS Connector for KM creates a set of DMS-specific KM propeties. There is a property named dmsrm_characteristics that contains the characteristics assigned to a document in DMS. However, it appears to concatenate all characteristics into this 1 KM property. Does anyone know if there is a way to split these charateristics into seperate KM properties?
Maximum points to the first correct answer.

Hello Zbynek,
I installed the DMS once, but my experience how to use it is poor.
In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
It is not much, but maybe it helps...
best regards
Guido

Similar Messages

Attaching Drawings/Document to equipment without going through DMS

Dear all,
Is it possible to attach Drawings/Document to equipment without going through DMS.If yes please answer fast..its urgent!!!!
Thanks,
Antara

You may carry this thro IE02 services for objects then u can attach here. but not advisable.
Better way is create CV01

Mapping information to SCOM Alert "Path" field through the connector

Hello,
We are using the Oracle Enterprise Manager connector (link to the guide: http://docs.oracle.com/cd/E11857_01/install.111/e14736/toc.htm) to send events from OEM to SCOM.
According to the Oracle connector documentation, the Target host parameter from OEM can be mapped with one of the SCOM Alert custom fields paramaters.
The issue is that we need to have this parameter mapped with the SCOM Alert Path field instead of Custom field.
Is it possible from the SCOM side to accept custom values and assign them to Alert Path field through the connectors?
Thank you a lot in advance!

Hi
Alert path is read only property for alert, you can not change this parameter. you can use custom field(1 to 9) or Ticket Id for alert.
Regards
sridhar v

Where to find the document uplaoded for HR object link through DMS?

Hi,
This is regarding HR object link (Object link PLOGI,screen 500) through DMS .
I have attached a document for a personnel number in CV01N transcation tab HR Object by specifying plan version : blank, Object type 'Person', Object ID -selected the personeel number.
I wanted to view or display this document from HR transactions,Please let me know from whic transaction and menu path I can view the uploaded document.
Regards,
khaderhussain.

Dear Khadir,
you can check service for object(attachment) in TR. code for Personnel Number.
Aby,
well said about, Archivelink is the preferred solution for maintaining HR Documents.
As Archive Link solution given so many times by many experts.
but, what about
1.TREX Search for HR documents.
2.What abt Authorisation control
3.do you think end user can upload documents easily by selecting object/doc.types in OAAD(ie.OAOH)
4.can you maintain folder structure through Archive Link?
can anybody clarify these queries as it is mandetory in most of business processes? if not what is the alternative solution.
thx. in advance..

How to set Logging properties through commandline ?

I am using the 1.4 logging framwework. The properites for logging can be specified in a file. What if, i
want to define my properties through commandline e,g
java -D java.util.loggin.fileHandler.level=SEVERE
The above doesnt work. Is there any other way ??
Any reply will be much - appreciated.

I guess nobody has started using Logging framework of
JDK 1.4.. ???

Mapped a custom user profil propertie office 365

Hi,
I created a customer user profil propertie named ="CodeUO" , Type Text.
I have ticked the index and alias box
then I created the property bag for this property.
but when I user the search
https://--------/_api/search/query?querytext='*'&sourceid='B09A7990-05EA-4AF9-81EF-EDFAB16C4E31'&selectproperties='CodeUO,AccountName'
I have this result:
-<d:element m:type="SP.KeyValue">
<d:Key>CodeUO</d:Key>
<d:Value m:null="true"/>
<d:ValueType>Null</d:ValueType>
</d:element>
Best Regards,
ND

You have to perform a new crawl of the user profiles in order to get values in the properties. So you have new user profile properties which are getting corresponding crawled properties called People:PropertyName, and you have mapped these to two managed
properties in the search schema named CodeUO and AccountName..right?
Thanks,
Mikael Svenson - Search Enthusiast
SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

BP Dms Connector no show files

HI,
We are at EP 7.0 SP 18 and ECC 6.0
I deploy the BP DMS Connector KM 1.0 ( BPDMSCONN00_0-20000787)
We assign the Role Document Explorer
We follow the instructions in the Library.
In the role we see the carpet dmsrm and below it the carpet Dynamic Carpet
But do not see any files in the folder¡¡¡¡
We think is a problem in DMS don not permit to see the files.
someone had made the procedure in DMS and KM to see the files?.
if we pretend to create a carpet, we see some data of the DMS, so, we know the communication is correct between KM and ECC.
Thanks

Tomas,
The variantprefix is very important. It is defined in the repository service as KM_. Use this to define variants in the DMS. They will then automatically appear in the /dmsrm.DynamicFolder as folders with the description name you gave the variant in DMS. To be able to edit documents and create folders, you need to ensure that you have the Document Manager role assigned to the user who will be maintaining. this role is delivered with the Business package for DMS Connector for KM. Further info can be found in the documentation "Business Package for DMS Connector for KM" that you can obtain from the following website: https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio then select the Package documentation Link.
Also, set the properties repository service in the DMSRM repository manager. This will help in indexing the documents should you have Trex installed.
Just a thought, though. Instead of using the Document Explorer, it may be better to provide your users with a KM Navigation Iview, with Breadcrumbs removed and Presenation changed. Alternatively, create a web page (or pages) to the variants in the Dynamic Folder and have a graphical user interface instaed of the explorer interface. Just a thought.
Regards,
Ed B.

KM DMS Connector isuue

Hello all,
I'm working with DMS Connector but I don't know the limitation of this repository.
Is it read only ? How can I create a Document inside the Portal KM and store it under the DMS repository?
Is the a full documentation about this connector, all I can find is demo PowerPoint presentation without technical information.
Thanks
Amit

Hi Devlin,
if you are using:
"Business Package for DMS Connector for KM"
from:
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
then you will be accessing the DMS through the KM iViews.
Another Business Package you will find when searching the Content Portfolio for "PLM" is:
"Business Package for Design Collaboration"
Regards, Karsten

DMS Connector & using classification in variant

Hi-
Does anyone know if you use classification values (class and characteristics) in the definition of your KM DMS connector variant if the connector reads them?
Or is there a trick to have the connector recognize that classification values have been entered?
For our connector, it seems that the classification entries are ignored.
Thanks!
-Jenn

Hi
I've seen reference to a SAP-DMS Configuration document.
I'm looking for the implementation Guide for Document Management.
Does anyone have a link.
Please send it to [email protected]
Regards,

DMS Connector for KM : I see only one document type from the document area

Hi,
The DMS connector is installed successfully on KM.
I can display folder tree and documents but I see only one type of document.
I mean, when I use transaction OAC0, I see different content repository defined in DMS.
I wonder where is the setting that specified which content is link to the DMS connector for KM.
Thanks in advance.

Hello Zbynek,
I installed the DMS once, but my experience how to use it is poor.
In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
It is not much, but maybe it helps...
best regards
Guido

DMS Connector for KM 1.0 set DMS subfolders as root for DocumentExplorer

I have three folders under the root folder of DMS Connector:
Bills
Tickets
TechnicalData
I want an independent document explorer iView for the first two and the third one not being displayed on the EP.
So I put '/dmsrm/Bills' as root navigation folder and initial navigation folder. If I do this the Document Explorer shows an error saying the selected resource does not exist or is not available. If i set '/dmsrm' folder there is no problem but then I can't separate different subfolders in different iViews.
How can I make it for the subfolders to be the root folder of Document Explorer?
Thanks in advance and best regards,
Ibai

I have the same problem!!!!
how could you solve it??
thanks in advance!!!
Regards

API for DMS Connector(KM)

Hi,
We configured the DMS Connector for KM on our portal. The DMS Document Explored Iview has document upload and DIR creation capabilities. We are trying to upload documents for browser(WD Java application) to DMS. We wanted to use the DMS connector functionalities. Is there a DMS Connector API which we can use in our WD Java application to create the DIRs and upload documents to DMS? Any help would be greatly appreciated.
thanks,
Venkatesh.K

Hi Venkatesh,
We had the same issue and raised an OSS message, But as per SAP there is no standard DMS Connector API's for KM at this time. They have proposed this one to be a standard for future releases. But here is a note which would give you an idea of all the Standard BAPI's in DMS. Note :766277
Regards
Krishna

DMS connector

Hi,
I face some problems with the new DMS connector (ECC6):
I have assign the Document Manager role to a user (this user have full right in the ERP system), in the iview I see under the dynamic folder a KM folder (a variant system KM have been created in ERP system).
1- I see the list of the files in the KM folder, and I would like to see the FID containing these files. How to make this, if its possible?
2 If I want to create a new folder or make an upload since the document manager, I have the error message: The item could not be created because an exception occurred in the framework.
3 - If I want to copy or move a file I have the error message: Target must be a real document-based structure.
4 And to finish, I dont see the Public Documents under the Dynamic Folder, nevertheless I have created a document structure with the document number EDIPUBLICROOTFOLDER in the ERP system.
For your information, I work on E P 7.0 SP11 (Netweaver 4s)
Thanks in advance.

Hi,
I am also getting Target must be a real document-based structure. at the time of uploading of a document.
Is your problem solved? Can u please share the solution.
Thanks in Advance,
Amit

SAP PLM DMS Connector - Read Only

I've a very simple question.
Using SAP PLM DMS Connector can I upload documnents into repositories configured for DMS?
I read the documentation and it looks like a read only connector.
Thanks and Regards,
Prasanna Krishnamurthy

Hi,
It is a read only connector, confirmed by SAP.
Cheers,
Tuval

BP DMS Connector for KM 1.0 & ECC 5

Hi All,
I'm trying to configure DMS Connector on EP6 SP16
with ECC 5 as a backend system.
I imported the BP DMS Connector and created a system in the portal that connects to the ECC 5 system.
The connection is available and the backend system
contains DMS repositories and a selection variant
that displays 1000 documents, but when I enter the
Document Explorer in the portal I can only see the Dynamic Folder and it is empty.
When I use an IDES 4.7 system as the backend I can see all the folders and the documents inside.

Hi Vincent/Roey,
Could you guys help me sort a prob, am facing on DMS connector front.
We followed the documentation for dms connector and when we clicked on document explorer all i get is a system error
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class: class com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException
Exception Message: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
What might have gone wrong ? Could you please advice me on this front ?
Thanks,
Anupama

Mapping MDS Characteristics to KM Properties through DMS Connector

Similar Messages

Maybe you are looking for