Mapping Network Drive for external user does not work

I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
I am able to map this network drive when using [email protected] as user.
However when trying to do this for the user [email protected] I am not able to map the drive.
I am testing this in order to simulate the client to map the network drive.
Logging on the beehiveonline with the user id [email protected] works fine.
Your help will be greatly appreciated.

Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
Try again and let me know how it goes.
Phil

Similar Messages

  • Network Drives for All Users

    I am looking to map a few network drives for any user that logs into our iMac.  Is there a way to do this?  I know how to do it on a per user level.  We just need a few drives to be mapped at all times. Thanks.

    Autofs: Automatically Mounting Network File Shares in Mac OS X
    Using the Mac OS X automounter

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • External editing does not work in LR4 (??)

    external editing does not work in LR4 (updated from LR3 a few days ago)
    has anyone an idea to solve this problem?
    Thank you.
    Regards
    Priska

    priskaleutenegger wrote:
    no ..
    when I send the RAW Document for external editing (Elements 10) nothing happens at all ... zero :-(
    a friend of mine has the same problem - also updated from LR3 to LR4, external editor: elements 10
    Which process version is the image you're trying to edit externally? 
    You right-click (I'm assuming PC, can't help Macs), there should be a context menu option "Edit in".  You choose that, and there's an option for Elements 10 or not? 
    If so, what happens when you select it?  Do you get any further message?
    If not, you may have to go to Edit menu, preferences, External Editing tab and create a preset for Elements.  In the "Additional External Editor" area, click "Choose" and navigate to wherever Elements is on your machine and you can create a new external editor. 

  • My iphone 4s will not connect to networks.  the button is greyed out and cannot turn o.  I have reset the network settings and it still does not work - any ideas?

    My iphone 4s will not connect to networks.  the button is greyed out and cannot turn on.  I have reset the network settings and it still does not work - any ideas?

    Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem.  I just updated to 8.1.3  - I thought the update might fix it.

  • Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?p

    can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?

    The problem is I cannot turn on wireless setting.  The "sign in to icloud  -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again.  If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work.  Vicious circle.

  • The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works.

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

  • What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
    Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
    Apple officially refurbished equipment is usually good quality.  Surprising this has happened but you need to press on with complaints and try for resolution.

  • [svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

    Revision: 7473
    Author:   [email protected]
    Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
    Log Message:
    Fix for 'ant asdoc' does not work.
    It should now work from both svn and package zip.
    Bugs: SDK-15306
    QE Notes: None.
    Doc Notes: None.
    tests: checkintests
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15306
    Modified Paths:
        flex/sdk/trunk/asdoc/build.xml
        flex/sdk/trunk/build.xml

  • Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

    Hi
    We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
    We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
    To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
    The strange thing is that:
    - It works for all other logfiles
    - If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
    Any ideas?
    Best regards
    Tom Bo

    Hi,
    Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
    In special the changes after patch collection 2007/5.
    Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
    hope this helps..
    Regards
    Rolf

  • HT3702 how do I cancel an application that I am being billed for monthly that does not work

    How do I cancel an application that I am being billed for monthly that does not work anymore?

    How to report an issue with Your iTunes Store purchase
    iTunes Store: Purchasing and managing auto-renewing subscriptions

  • U300 Touchpad Driver for Windows 8 Does Not Load Properly

    I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
    If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
    A standard mouse works just fine (albeit without any Win8 functionality).
    ***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

    Hi, 
    If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system. 
    Meanwhile please try to enable or disable Secure Boot by referring this article: 
    Secure Boot
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
    Kate Li
    TechNet Community Support

  • Windows 7 Prof. decryption on an external hard drive (WD My Passport) DOES NOT WORK

    I cannot decrypt files and subfolders of a top folder on a WD My Passport hard drive using the "advanced attributes" of folder "properties". (The "advanced attributes" of folder "properties" works
    on the internal hard drive.)
    I can decrypt a file individually on the WD My Passport hard drive using "advanced attributes" of folder "properties". However when I try to use "apply changes to this folder, subfolders and files" option, the
    decryption DOES NOT WORK on files and subfolders. (The system does not generate any error message just runs through the items and leaves files and subfolders in an encrypted state.)
    Is there another way to decrypt files and subfolders of a top folder?

    I am having this same issue... it seems all my files have been encrypted and I am the original owner of them! Have you found a solution to this problem?

  • Quicktime plugin for screen capture does not work in flash player 11.2

    Hello,
                   I have created a quicktime plugin (it is .component file) for screen sharing purpose.
    I have used quicktime framework for that. plugin is detected in flash player.
    This plugin is working perfectly for flash player 11 and below.But,
    It does not working in latest flash player 11.2.
    I have seen following error on console -
    Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
    Session received the following error while decompressing video:
    Error Domain=NSOSStatusErrorDomain Code=-8974
    "The operation couldn’t be completed. (OSStatus error -8974.)".
    Make sure that the formats of all video outputs are properly configured
    Note - Compression format used in plugin is kBMPCodecType.
    Please, help me.

    The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.

Maybe you are looking for