Mapping of field from ECC to CRM - DChain-spec. status field

Hello,
In my current assignment we will be downloading all the master data from ECC to CRM. For a particular requirement, we need a field in COMMPR01 in CRM from material master MM03 in ECC.
Field Location: MM03> sales:sales org1>DChain-spec. status
Please find below technical infomation for that field ( ECC)
Field Data:
Table Name: MVKE
Table category: Transparent table
Field Name: VMSTA
Data Element: VMSTA
Field Description for Batch Input
Screen Field: MVKE-VMSTA
Program Name: SAPLMGMM
Screen Number: 4000
Please help me in locating the same field in CRM (COMMPR01)
Regards,
Vipul

Hi Vipul
Please implement note 1494159. This should doanload this field as well then.
Best regards
Christophe

Similar Messages

  • Error in BP Mapping from ECC to CRM 5.0 -Specify a card type error

    Hi gurus,
    I have taken
    *Specify a card type-Message no. R1561*
    error in case of mapping cust_main data from ECC to CRM 5.0. When I check the selection result of Bdoc messages by getting SMW01 facing with above this error.
    Could you please help me to overbeat this error in a quick way in order to map properly...
    Thanks so much
    Best regards,
    Fahrettin Kerem BOZBIYIK

    Hi Kai,
    Firstly thank you for your notes notification!
    That's right symptom is right over there but in our ECC system my related customer has no credit card type data in payment cards data tab so that why would I have taken the Bdoc validation error occasionally in case of mapping process to CRM 5.0 such as I mentioned?...
    Best Regards,
    FKB

  • Integrating Data From ECC to CRM

    Hi  Experts,
    My requirement is, After Updating the Material master data in ECC , the same updated data is integrated with the corresponding data of the Product Master in CRM.
    Problem: to map the data from ecc to CRM , I am supposed to call this  RFC Fm ( existed in CRM side) from ECC using RFC Destination.
    to map the data to this TABLE parameter , In ECC side I don't have similar strcture that was exist in the SRM side. so could any body help me how can i send the data from ecc to this fm existed in SRM.
    Thanks & Regards.
    Naga Priyanka. T
    Edited by: Priyanka Tubati on Feb 2, 2010 10:35 AM
    Edited by: Priyanka Tubati on Feb 2, 2010 10:38 AM

    Hi Kumar,
    Please select the following parameters when downloading the HR Org from CRM:
    You can do this  in the program RHALEINI (or in the transaction PFAL, which has the same function)
    Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
    Objects:
    1. Plan Version: 01
    2. Object Type:  *
    3. Object Id: Copy the Object Ids which you want to transfer from HR System
    4. Object Status: *
    Reproting Period: All
    Structure Parmaters: Blank
    Transfer Mode:
    Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
    Update: this will update the change records in CRM system
    Message Types: HRMD_ABA
    Also check SAP Note: 119780
    Hope this helps.
    Regards,
    Madde

  • How to map service contract data from ecc to crm

    Hi Experts,
    Please help me,how to map service contract data from ecc to crm system.
    is there any perticular process.please let me know.
    thanks in advance..

    Hi Srinivasulu,
    Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
    Check the Partners mapping from R/3 to CRM and that will be all.
    I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
    Good Luck.
    Sharath.

  • Replication of Material Sales status (with user values) from ECC to CRM

    Hi all,
    I 'm trying to find out how to replicate the  sales statuses of the material master data in ECC (in view "sales", field DChain spec. status, MKVE-VMSTA)  to the Material SAles statuses in CRM.
    The sales statuses in ECC have been maintained (via menu SPRO/logistics general/master data/basic settings/settings for key fields/DAta relevant to sales and distribution)) : new specific values have been added to the standard ones.
    Then, this customizing has been replicated to CRM via the DNL_CUST_PROD3 repliction object ( table TVMS).
    I have also created a user status profile with values in CRM with the same values, and assigned with the configurator the status profile to the screen, so the values are selectable in the sales status in CRM (in header).
    But, now, how can i replicate the sales statuses of the ECC materials to either :
    -the product status (header) in CRM, or
    -the sales status (distribution chain specific) in the assignment block of the Distribution-chain specific data  ?
    Is a specific development needed?
    there are some existing notes (623026, 428989, 495764), but not clear about what is possible in terms of replication of statuses
    thanks a lot

    It seems that there is no mapping between ECC and CRM sales area.
    If u want to download customer from ECC for that u have to mention the customer sales area in to the filter and then u have to start  down load from ECC.

  • Replication of Customer from ECC to CRM --- Multiple A/c Groups

    Hi Experts,
    I am trying to replicate customer master data from ECC6.0 to CRM7.0 and vice versa. Replication is up and running right now for only one Account Group (GEN-Z created for business) in ECC.This A/C Group (GEN) is mapped to BP Classification "Customer" in PIDE.
    Now, I want to replicate customers with 5 other A/c  groups to CRM as well. In PIDE, I have maintained a total of 6 entries for a/c groups to classifications (ECC to CRM). All 6 A/c groups are mapped to "Customer" classification.
    This "customer" classification generates customers in role "Sold-to-party". For STP role mandatory fields have been matched to GEN A/c Group.
    My main issue is how do I make sure there is no mismatch of customer fields in ECC and CRM as All other a/c groups that have also been mapped to the same "Customer" classification in the same way as A/c Group GEN. Problem would crop up because, there are diff set of fields kept mandatory for different a/c groups.
    From CRM to ECC, I can select the relevant a/c group from "Classification" tab in role Sold-to-party.
    But, there would be the same problem of mismatch of mandatory fields between Sold-to-party and all other a/c groups.
    Is there a solution to this problem. How can I make sure replication works for multiple A/C Groups too.
    Thanks and Regards
    Varun Taneja

    Hi Robert,
    I read that in some other post too, it worked for someone. But here it is, I would like some advice from you...
    Suppose, I have 2 A/c Groups... X and Y, both with different mandatory field settings in ECC.
    Now, In BP field grouping on CRM side, I have made field settings(mandatory etc.) according to X A/C group. So when I select, X from classification tab during BP creation, replication would be successful.
    And, if I select Y from classification tab, it would give an error "Fill in required mandatory fields" since fields have not been synchronized with Y. How can I take care of this issue.
    Also, for ECC to CRM, how do I select multiple classifications, it doesn't allow for more than one entry for one classification.
    I hope I am clear about my requirement.
    Please share your feedback.
    Thanks and Regards
    Varun Taneja

  • Replication of partner function from ECC to CRM

    Hi experts,
    We are working on CRM 5.0 with back end ECC 6.0
    In our scenario we are creating sales orders in ECC and replicating it to CRM.
    Now the problem is we have a partner function created in ECC which is entered manually ( not through partner determination procedure) . We have also created the same partner function in CRM but we are not able to populate that partner function field automatically.
    Is there any way by which we can populate this ?
    Points will be rewarded for suitable solution.
    Regards,
    Madhu

    hi
    just mainatining partner function wont be enough ,you need to do two things
    1. mapping of BP function between CRM and ECC
    2. specify the path from ECC to CRM so that they can be replicated successfully
    so,IMG: Customer Relationship Management -> Basic Functions -> Partner Processing -> Data Transfer -> Distribution of Partner Functions from SAP ECC into CRM
    this is the path where in distribution you need to specify the path
    and maintain there the mapping between the R3 and CRM
    RFC destination should be CRM and source is ECC
    best regards
    ashish

  • Customer classification data from ECC to CRM

    Dear Friends,
    We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer  classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
    Thanks,
    Rajinikanth G

    Added new fields using AET and did Middleware enhancements as per the note -  Note 736595 - Exchange of EEW fields with R/3 customer master.
    Thanks,
    Rajinikanth G

  • Problem in delta changes from ECC to CRM for Customers created in CRM systm

    Dear all,
    I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
    I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
    But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
    I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
    Your suggestions are highly appreciated.
    Best regards
    Raghu ram

    Hi Shanthala,
    Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
    and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
    As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
    Kinldy help me to resolve the issue.
    Your suggestions will be highly appreciated.
    Best regards
    Raghu ram

  • Downloading Material Master data from ECC to CRM

    Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

    Hi Rghunandan,
    To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
    First download the customizing objects using R3AS
    DNL_CUST_PROD0 u2013 Material number conversions
    DNL_CUST_PROD1 u2013 Product : Categories
    DNL_CUST_PROD3 u2013 Material : R/3 sales status
    DNL_CUST_SPROD u2013 Sales product item
    DNL_PLANT - Plant
    To download products foll the steps below
    1.Defining Product ID Settings  -COMCPRFORMAT
    Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
    This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
    The material master length is R/3 is defined in transaction code OMSL and is set to 18.  (also check note no. 545824)
    2.Make sure that CRM item categories and R/3 item categories are the same.
    In CRM, item categories and item category groups are seen via
    Customer Relationship Management  Transactions  Basic Settings
    3.Selecting specific objects for replication : R3AC1
    Use adapter object MATERIAL
    Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
    4.Replicate Materials : R3AS
    mention the adaptor object Material and execute
    Regards
    Itty

  • Replication of Plant data from ECC to CRM

    Hello Experts,
    Kindly require your assistance in the following requirement:
    I have replicated the quotes from ECC to CRM.  However, the plant information for all the materials are not getting replicated for quotes from ECC to CRM.
    I have followed the Note 493947 but in vain.
    Only respite being, when the quote moves from CRM to ECC, the plant is getting determined. But it is failing when the quotes move from ECC to CRM. There is no plant determination.
    Kindly request your guidance on this.
    Regards,
    Venkat.

    Hi Venkat,
    'Delivery Plant' field doesn't exist in CRM data model. Please refer to note  note 504169 which will give you the reason as to why some KNVV fields in R/3 system don't exist in CRM. Please read the details provided for "Field name: KNVV-VERSG, KNVV-KTGRD, ..." in the note 504169. This will tell you why 'Delivery Plant' (KNVV-VWERK)
    field doesn't exist in CRM.
    Due to different CRM and R/3 data models KNVV-VWERK field is not exchanged with CRM. Now if you want to enable this data exchange then you will have to enhance CRM data model and then with the help of user exits you can enable the data exchange. Please refer to note 513313 which will give you an idea about these data exchange user exits.
    Please be aware that note 513313 is not a direct solution to your problem but this note describes in detail how you can enable data-exchange between R/3 and CRM.
    Best regards
    Christophe

  • When transferring HR data from ECC to CRM via change pointers

    When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
    paricularly the last name and first name of BUT000
    Do you have any idea why this could be happening
    Thanks in advance

    Hi Kittu,
    Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
    use this links kittu.
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    Creating a change pointer and subsequently triggering an IDOC
    thanks
    karthik

  • Fields from ECC

    Hi,
    What would be the logic in the view if I have to fetch fields from ECC and display in the assignment block of the CRM.
    regards,
    Murali

    Hi Murali,
    You have to define an RFC Function Module in your ECC which will retrieve the data from ECC.
    Then call this RFC from your CRM view.
    You can take a look at this blog :
    http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
    although not directly related to your topic, you can use it to get an idea of the call to ERP FM.
    Hope this helps.
    Regards,
    Nisha

  • Custom data for equipment load from ECC to CRM 7.0

    Dear All,
    Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
    Thanks & Regards
    DB

    Hi,
    You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from  ECC to  CRM are downloaded.
    For more details jut go through
    http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
    Best Regards,
    Rajendra

  • Replicate sales orders from  ecc to crm

    Hi experts,
                        We are creating sales orders in ECC and want to replicate them into CRM. Can you please tell me the configuration steps required in the middleware to replicate the orders from ecc to crm.
    thanks in advance
    Andy

    Hi,
    To replicate ECC Sales Order to CRM Sales Order, you need to setup up the Data Exchange in both the systems. This means you have to configure the systems, then you need to do an initial data exchanges and then finally the delta exchange will happen in both the systems. You need to look at the configuration guides for a proper setup of the systems.
    You can search the forum for a detailed document with special focus on the integration points.
    Also have a look at the following SAP HELP link:
    http://help.sap.com/saphelp_sm40/helpdata/EN/3f/40623c046a9b67e10000000a11402f/frameset.htm
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for