Mapping of retail scenario

Hi all,
We are trying to map functional requirement of a Retail supply chain to R/3 system .
Can any body help us on following ponits
1. Demand Plan
How is it generated in sap?
what are the configuration settings
We need to provide reports on total duration the product has been at each node of supply chain
2. How is a product placement schedule made in R/3
how the manufacturer allocates products to the retail shops , where and how the customisation is done.
3. Inventory plan
How can we track the material after it is sold to retailer at it’s various Retail stores
We need to give details like duration for which it has stayed at the retail store
Retail store’s with zero inventory versus total no of retail stores for each sku
4. Transportation Plan
How is transportation planning done for each product for a  year/month/week
Regards
Nitin Bansal

can any body reply to this

Similar Messages

  • Retail Scenario

    Hi,
    in a retail scenario the price of material changes very frequently, how do we model it?. Please brief me the important considerations on the R/3 and BW side.
    Ravi.

    Hi Priti,
    Please go through these links
    1) /people/rajesh.sarin2/blog/2008/06/06/realization-gaps-in-it-retail-scenario
    2) mapping of retail scenario
    3) Re: mapping of retail scenario
    Thanks Regards
    Santosh Deepak

  • How to map free goods scenario

    how to map free goods scenario?

    Hi
    Two types of free goods
    1.with excise free sample goods
    2.With out excise free sample goods
    with out excise free sample goods
    step1 create a purchase order and tick free goods column
    step2 GRN against free goods Po
    step3 No a/c entry Generated.
    with excise free sample goods
    step1 J1iex
    step2. Part1 created
    step3. Part11 created
    rds
    Kavi

  • How to map the permits Scenarios

    Dear Experts,
    Good Morning  to Every to Body.
    I am confusing to map the permits scenario . In my client place they raise the Work permit request to the Safety Officer for getting the approval for doing their work.
    Based on working condition safety officer checks the safety precautions , after verification he approved it and handover to the workperson. if safety officer not satisfied with safety precaustions he deny to give the approving for start the work. this is one scenario. and this work permit valid only for that approved day only. if its not complete that day , next day again workpermit was raised by work person or incharge of the work.
    2. scenario : for any corrective action on running machine or predictive maintenance time , maintenance people gets the work approval from the Relevant department or Concerned persons. Ones relevant department head gives approved , then only maintenance people will start the work.
    i am requesting you please guide me how to map in sap with out complexity. i am waiting for you people response.
    please suggest me.
    thanks & regards
    Jalu

    Hi,
    There are 2 different type of permits.
    1. Safety Permit
    2. Work Permit
    Safety permit will be approved by Safety officer. This is your first scenario. Work permit is approved by Maintenance officer, that is your second scenario.
      IWO10007 Maint.order: Customer enhancement - permits in the order
    As permits are approved in IW32, through above mentioned User Exit, you can develop some logic to restrict the authorisation between Safety officer in case of safety permits & Maintenance Manager in case of work permits.
    Regards,
    Maheswaran.

  • Mapping the PP scenario

    Dear PP Gurus,
    Please guide me to map the following scenario:
    ABC is a company dealing with Manufacturing Of Refrigerators to their customer which includes Model 1  & Model 2.
    Based on the historical data of sales to Model 1 Model 2, the ABC Production Planning team does the sales & Operations Planning (Forecasting) for next six months for Refrigerators (Which consists of Bill Of Material).
    Also there are some key materials like Coils which is imported from United States. The Coils needs to be planned separately for example Master Production Scheduling as the cost of carrying the inventory is high for such materials.
    Based on the Forecast data, the Materials are planned and the finished products are produced to be delivered to the Customers (Model 1 & Model 2).
    The Costing for an order to be demonstrated which should outline the components cost & process Cost for the finished goods.
    The Planned & actual production to be compared at the end of the day and the cost of same.
    Regards
    Raghu

    Hi,
    You can use discrete manufacturing scenario as per your requirement.
    1. Based on the historical data of sales to Model 1 Model 2, the ABC Production Planning team does the sales & Operations Planning (Forecasting) for next six months for Refrigerators (Which consists of Bill Of Material)
    You can use PIR demand planning (MD61) or SOP to plan for the Model 1 and Model 2. Based on the BOM for the two models, after the MRP run system will generate the demand for Components.
    Also there are some key materials like Coils which is imported from United States. The Coils needs to be planned separately for example Master Production Scheduling as the cost of carrying the inventory is high for such materials
    You don't need to plan them seperately, since it is only a purchased parts. You can have a lead time (Planned delivery time) in the material master for Coils, based on the demand for Model 1 & 2, and based on the leadtime, system will generat Purchase requistions and through them you can import it.
    *Based on the Forecast data, the Materials are planned and the finished products are produced to be delivered to the Customers (Model 1 & Model 2).
    The Costing for an order to be demonstrated which should outline the components cost & process Cost for the finished goods.
    The Planned & actual production to be compared at the end of the day and the cost of same*
    You will have BOM with components and Routing with processing time and workcenters and you can run costing run for the Model 1 and Model 2 based on the Bom and routing the cost will be assigned the Model 1 &2.
    The cost will be showm as planned cost once you create a Production order for the Models basd on the system generate planned order based on the demand.
    You can confirm the actual component consumed and actualtime taken to manufacture the production order in the confirmation screens from which teh system will post the actual values. You can do variance and order settlement.
    Overview:
    Demand (Forecast) - MD61
    MRP run - MD02
    System will generate PR to purchase components and planned order (to manufacture Model 1 & 2)
    MD04 - Material Stock / REquriements view
    CO41- Planned order to Production order
    CO05 - Order Release
    CO15/ CO11N / CO15 -Orde rConfirmation
    KO88- Order settlement
    Pl check and revert back if you need more input.
    Thanks,
    JK

  • Handling Obsolete Materials in a Retail Scenario

    Hi,
    We have in our Retail Scenario ECC 6 where some Trading Materials have become obsolete and our requirement is to block further procurement and at the same time materials need to be sold.
    a)     For material blocking we can use field X_Site status 01 in Basic View in Material master for this purpose. If we use this indicator it is not allowing      
    to sell the goods.
    b)     A report required to indicate availability of these obsolete materials in various  sites/plants 
    Require your valuable inputs.

    It sounds like you want something like
    SQL> create table test(
      2    value number,
      3    mod_user varchar2(100)
      4  );
    Table created.
    SQL> create or replace trigger t_mod_test
      2    before update on test
      3    for each row
      4  begin
      5    if( updating( 'MOD_USER' ) )
      6    then
      7      null;
      8    else
      9      :new.mod_user := NVL( sys_context('USERENV', 'OS_USER')
    10                           ,user );
    11    end if;
    12  end;
    13  /
    Trigger created.
    SQL> ed
    Wrote file afiedt.buf
      1  create or replace trigger t_mod_test
      2    before update on test
      3    for each row
      4  begin
      5    if( not updating( 'MOD_USER' ) )
      6    then
      7      :new.mod_user := NVL( sys_context('USERENV', 'OS_USER')
      8                           ,user );
      9    end if;
    10* end;
    SQL> /
    Trigger created.
    SQL> insert into test values( 4, 'xyz' );
    1 row created.
    SQL> update test
      2     set value = 1
      3        ,mod_user = 'abc'
      4   where value = 4;
    1 row updated.
    SQL> select * from test;
         VALUE MOD_USER
             1 abc
    SQL> update test
      2     set value = 2
      3   where value = 1;
    1 row updated.
    SQL> select * from test;
         VALUE
    MOD_USER
             2
    JCAVEDDBC64\jcave
    SQL>Justin

  • How to map different Retail store business processes in SAP

    Hi
    In our stores( Retail Business) there are two sales sections, In the first section we have Point  of Sales systems, here we placed our materials in racks, after confirming and creating sales order customer collects pick list and goes to the location to pick the products. Here customer Invoice will be created before delivery.
    In second sales section normally order fulfillment will take place. Customer visit this section and select products and places an order. But the delivery will be at a later date. We receive some down payment from customer and we create sales order with scheduled delivery. while delivering the products we create delivery note and it will be sent to customer, Our driver will carry the delivery note along with products to the customer and take customer signature on the delivery note. In this second process we are creating Invoice after delivery only.
    Could any body suggest me how can we map these two processes in SAP?
    Your suggestions will be highly appreciated.
    Thanks and Regards

    Hello,
    Check out these links, as they would be useful:
    1. http://www.sap.com/industries/retail/businessprocesses/index.epx
    2. http://help.sap.com/bp_retailv1500/Retail_NL/documentation/RET_Solution_Scope_EN_NL.doc
    3. http://204.154.71.138/pdf/8560/Serving_the_Needs_of_Food_Retailers.pdf
    Regards,
    Gauravjit.
    reward points if the links are useful

  • Error in mapping program in scenario

    Hi all,
               here i am facing an issue which is to be fixed very urgently. please help me masters.
    here i am having a single source structure and multiple receiver structures. after confirming many sources i finally started my work with the help of this blog.
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    But now i am facing a problem that my mapping program and interface mapping are executing the file successfully when i tested in the test tab of both of them.
    When i tried to test my scenario in TOOLS-----TEST CONFIGURATION . there it is showing error in the interface determination/mapping step.
    here on the receiver side we are going to use proxies. for that we used XI adapter.
    please check the above blog and let me know  whether my total procedure is perfect or not
    THANKS in advance to all .
    HELPFUL ANSWERS WILL BE REWARDED.

    Hi Ramana !
    Could you take a screenshot of your error and put it in www.imageshack.us, then give us the link to see exactly which error are you getting. Please expand the node of the error message.
    Does the scenario works actually?? I've noticed some cases where the test tool gives errors but once the scenario is running everything works fine.
    Regards,
    Matias
    Message was edited by:
            Matias Denker

  • "MAPPING" EXCEPTION_DURING_EXECUTE in scenario RFC TO PROXY

    Hello all
    I  am facing  a problem in a RFC PROXY SCENARIO and I don´t whether I can solve it .
    System A : R3
    System B : XI
    And my scenario is RFC TO PROXY. 
    i will implement the proxy in the ABAP  XI . For now I have entered no code.
    I have mapped an rfc from r3 to my data type . My message mapping , Interface maping works very well .
    When I start the program in R3 . I got the following error in the trace of sxmb_moni
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_MAT_</SAP:P1>
      <SAP:P2>java.lang.NullPointerException</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_MM_MAT_:</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    How can make this scenario working ?

    Stan,
    Follow the steps below:
    1. Take the source XML message from SXI_MONI
    2. Save the xml message into your desktop.
    3. Log into Integration Repository and open the concerned mapping object.
    4. Go to test tab and upload this xml at the source side.
    5. see whether everything is green at source message type.
    6. execute
    7. you will find the error in the log immediately after executing
    see for the error and take appropriate action.
    Best Regards,
    Kiran Bobbala

  • No mapping program found - scenario soap to file

    Hi all,
    I'm developing a PI scenario Soap to file and I have a following problem.
    My source is a third party System and my target is a ECC 6.0.
    I have created two data type, only different in one value.
    When tried to check my scenario, I obtain this error:
    <code>ADAPTER.JAVA_EXCEPTION</code>
            <text><![CDATA[
                    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:NO_MAPPINGPROGRAM_FOUND:
                    at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1214)
                    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                    at java.lang.reflect.Method.invoke(Method.java:592)
                    </text>
    I have checked my message in the SXI_MONITOR's transaction and i see in column "Detail state", the next information:
    "Mapping: Error in Resource Resolution or Initialization"
    When i enter in my Error log, i can see the next information:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
      <SAP:P1>Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Mapping program is not available in runtime cache: Object ID 7FD3FFAD6DBD3BAC9E91883B24CAF1CA Software Component 47B2EEC1B0F111DF8A0CF473AC1D633C</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    i need some file transformation in SOAP-FILE scenario?
    It may be that have a mistake in my develop?
    Could you help me please?
    Thanks & Best Reggards.

    Hi Monica,,
    The issue might be related to cache, please run the full cache refresh. also check the sap note1312182.
    regards,
    Harish

  • Issue in mapping Operation subcontracting scenario

    Hi all,
    I will explain my scenario of subcontracting, i am getting issue when mapping the scenario in SAP.
    Scenario: For manufasturing 1 SF my client require 4 operations. All the raw materials required will be issued in the first operation. After first operation he will send the product manufactured to outside vendor and again he receives it after some value additiion. He continues the next two steps and finally manufactures SF which inturn will be used to manufacture his FG.
    Configuration: I have assigned a purchase info record in the operation detail. I have not given any WC to that operation because the cost should be captured only from the purchase order during the GR from vendor. After the confirmation of the first operation i am getting a purchase requisition for operation without a material.
    Issue: I am not able to show the material which he is sending to the vendor as my purchase requisition doesnot contain any materials.
    Please suggest me any possible solution to outcome this scenario.
    Thanx in advance
    Regards,
    Krishna Chandra

    Hi all,
    i got my the answer for my scenario by this link
    http://forums.sdn.sap.com/thread.jspa?threadID=1805266
    Regards,
    Krishna Chandra

  • Multimapping n:1 (XML to IDOC) Issue - Cannot use map in the scenario

    Hi! I have created a multimapping in the directory. Source message is 0...unbounded and destination message is 1. The intention is to bring a single file into XI that contains mutliple XML messages. I then need to map this into a single IDOC. I have the mapping working. However, when I try and bring this into my integration scenario, XI cannot find the message interface.
    I am not 100% convinced that this will all hang together =) But Cannot even prove that 'cos I cannot set this up in the scenario.
    Any ideas would be greatly appreciate and rewarded.
    Thx
    Duncan

    Apologies for getting all my terminology screwed up. Here is what I have:
    <u>Integration Repository</u>
    Imported Objects - Target IDOC
    Interface Objects : External Definitions - XML schema of source message
    Interface Objects : Message Interface - For source XML; Outbound + Asynch
    Message Objects : Message Mapping - XML (0..unbounded) to IDOC (1) map
    Message Objects : Interface Mapping - XML message interface (0..unbounded) -> XML to IDOC mapping -> IDOC (1)
    <u>Integration Directory</u>
    Interface Determination...
    I select Type of Interface Determination = Extended but when I pull down the dropdown I do not see the multimap.
    I have this working OK for one IDOC to multiple XML messages, doing the same as above. I have checked SCV, namespace etc... and they are correct. I am sure I am missing something very simple.
    Again, any ideas appreciated.
    Thx
    Duncan

  • Inventory Management in Retail Scenario

    Hello Gurus,
                     We are implementing BI7 and SAP IS retail. I have tried using 0IC_C03 cube but it is not giving correctresults. Can anyone suggest for implementing inventory management in retauk scenario.
    Regards,
    Baljit Singh

    Hello OJ,
               Thanks for your reply/ I have also tried 0RT_C36 cube. Values are still coming negative. I have used 2LIS_03_BX instead of 2LIS_40_S278.I have also choosen industry sector as retail. I have also checked BW in tcode BF11. There is no data as of now in 2LIS_40_REVAL. But still the values are negative and not matching with stock in ISR systems.I have also done compression and marker updates the way we do for 0IC_C03.
    Can you please advise. Is there any special config for ISR scenario.
    Regards
    Baljit Singh

  • Mapping of scrap scenario

    Hello Experts,
                          I have a scenario were I need to map scenario for scrap, while producing finished product.
    Example: Finished product --A
                   Semi-finished product--B
                   Raw material product--c
    While producing product A, some of B material gets as scrap for me, but if send it to a process industry(sub-contracting to vendor) i can get it back as my raw material C.
    please suggest me how can I map my scenario.
    Thanks
    Satya

    Hi,
    If you always send it for sub contracting then
    Make finished Product as A
    Semifinished Product as B
    Semi finished product as C (in you case RM)
    Bi product as D (Which you termed as scrap)
    Now make a BOM of C in which D will be component.
    send material D for sub contracting and recieve material C from vendor.
    Regards,
    Vishal

  • How to Fill Setup tables for MAP (IS- Retail)

    Hello,
    I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
    2LIS_40_REVAL
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208
    Your reply is highly appreciated.
    Regards,
    Naresh

    Hi Naresh,
    We cannot fill setup tables for each data source.
    ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
    If you want setup tables names of your data sources please check below.
    2LIS_40_REVAL      ---   MC40RP0REVSETUP.
    Comes to your second post.
    2LIS_40_S202
    2LIS_40_S207
    2LIS_40_S208   these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
    If you are using LO data sources then no need to use LIS data sources.
    Regards,
    Venkatesh

Maybe you are looking for