Mapping of status CRTD,AALK with Technical names

Hi all,
We have Client requirment in which we are preparing Customized program which will download Budget data for a particular Project.
After executing this customized z transaction, we are giving following inputs.
Proj Def.
WBS Element
Version
Scope
Scale
Level
Status
It works fine if we are giving Status as I0001,I0005,I063,I0064,I0360 which is Technical name derived for Status ( From PRPS & JEST table ).
But Client wants to put status CRTD,AALK in that.
Any idea how status CRTD,AALK,REL mapped in Technical field.
Any pointes on this issue will be highly appericated. Points will be rewarded for useful answers.
Regards
Tushar

Tushar,
The correspondance between the status "code" and "text" is in table TJ02T.
I don´t know if this will be useful to your needs.
Regards
Martina

Similar Messages

Mapping between the query/report and the role with technical names - BI Sec

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?

I looked into this quite a while ago and cannot remember the exact details, but I think there were 3 tables needed together with a structure to explore with a function module, and you need to use the program ID to think them.
If you look in SQ01 then I am sure you will find one of the tables, and then search from there onward.
Alternately, while searching you might find a nice report which does this for you.
Hope that helps and let us know whether you find it.
Cheers,
Julius

Mapping between the query/report and the role with technical names

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?
Edited by: Phoenix on Jul 26, 2008 4:15 PM

Posted in wrong forum

While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Find objects associated with Technical names of routines

Is there an easy way to find what objects, TR/UR, are associated with the cryptic technical names given in a transport list of Routines and Update Rules?
e.g.:
-Routine
   |_0BCJXNMRQHE29898UDAQN1TOY
-Update rules
   |_20ZUEIGNKD42XNU4HPWJEZ75H
Thanks!

Hi Jolene,
You can try to look up tables RSUPDROUT and RSUPDINFO.
Hope this helps...

Wich is table for match between Infoprovider and update with technical name

Thanks in advance!
Bye!
Ferdinando

Hello ,
You can check table --> RSUPDINFO table for Update rules with tech ID between Cube and InfoSources.
and other ref tables are --> RSUPDROUT / RSUPDDAT / RSUPDKEY /
--EnjoySAP
**Award credits if you are done with my answer

Technical name for formula in query designer

Hi,
We have created some formulas in Query Designer.
We tried to assign the technical names to these existing formulas, it goes away as the save button on the top of the pop up is disabled.
Is there a way to assign technical names of the formulas created in the query designer.
Regards,
Charu

Charu Pandey,
Formulas are local, means available for particular queries only. No technical name.
Create Calculated keyfigures instead of formulas..., so you can save with technical names.
To display technical name in query, give discription same as technical name.
Hope it Helps
Srini

Technical names of column shown after POWL_D01

Hi
After we have executed POWL_D01 all column for the Queries are shown with technical names.
After first load the column description comes correctly in.
Does anyone know a report or somehow we can update this before the business user takes in use?
We cannot use POWL_WLOAD because query does not exist yet after POWL_D01.
BS
Henrik

I suspect this is due to some memory residue for the metadata. I'd suggest that you try to run transaction SHMM to clear the memory area or run report /SAPSRM/PDO_META_INVALID_CONF for the same purpose. Then check to see if you can see proper column descriptions.

Map variant technical name to text name

Hello Community,
In SE38, variants for each program have text based names.
In the STEP overview of SM37, and also in table TBTCP, the variant name (or "the parameter") is a technical name. For example: &0000000065119
How does one map the technical name of a variant to the text name for that variant ?
Even better: since I already have the technical names --> in which table does SAP store the values of the variant together with this technical name ?
Ultimately, I am searching for the values, based on the tech name (e.g. &0000000065119)
Thanks!!

Does this do what you want?
thisComp.name
Dan

Two Technical Names with same Description in BW

Hi Experts,
Currently I am facing Problem in SAP BPC NW 7.5 one of Applications ( Profit And Loss Appl)
At Backend ( BW) I could observe that for P&L application 2 diff technical names with same description "PROFIT AND LOSS". We were not sure who created the other one. Prior to that there was no problem while fetching the data.
Before creation of 2nd Info Cube in BW, I was able to retrieve the values ( Transfer values from Fixed Cost & Revenue Forecast). However, after cretion of 2nd cube unable to see my data in PL reports.
Before deleting 2nd Cube in BW, I could see the data in backend in old Cube, but unable to retrieve data in BPC excel report.
Once I deleted the new PL infocube in BW where there was no data in that cube, still I was not able to retrieve the data in my old cube.
Request you to help me....
Thanks & Regards,
Hari

Hi Sanjeev,
If Appset transport happend twice, all applications should have come in BW. But in this case only PROFIT AND LOSS has got 2 diff tech names.
Hi Nilanjan.
Yes, both the cubes in Infoarea ( QA system) and we have not faced earlier this problem either in any other environments ( DEV or PROD).
Will DEV system appset transport will help to resolve this issue in QA since DEV & QA has same structure?
Regards,
Hari

Error status code 400 with the description Message mapping failed

Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashit

hi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal

Technical name of status

Hi ,
can any one tell me where to get the technical name of production order status for example VCAL is I0056.
I want to get this for all status starting from production order rel.
Thanks and regards
Thamizhchelvan G

Hi,
pls find
Goto SE16 - enter table name
TJ02T - System status texts
Regards,
Sankaran

Copying an existing Variable with change of technical name in Qery designer

Hi All,
Is it possible to copy a variable and save it with diffrent technical name on same IO.
I understand before BW 3.0 there was RSZV (Maintain Variable) but what is the alternative for the same in BI 7.0.
Thanks in Advance
NooN

Hi,
Check the below thread might help you,
[http://sap.ittoolbox.com/groups/technical-functional/sap-bw/copy-of-variable-1063532]
Regards,
Durgesh.

Multiple Infoobject with same technical name

Hi All,
I have a very basic question which confuses me a lot.
I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area - ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0customer( master data attr) is linked as a dimension. I created a copy of 0SD_C03 and the new Infocube name is ZSD_C03_T. It also has the same 0customer master data attr as a dimension(obviously!).
Now both the infocubes have different technical name(0SD_C03 and ZSD_C03_T) since they will be storing different sets of data(lets say). but the technical name of the master data (0CUSTOMER) is the same for both cubes.
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
If I search the Info provider section for "0CUSTOMER", i get two entries: One within my info area and another within another info area. And also i can keep doing (Right click Info area--> Insert Characteristic as Infoprovider) on every other info area and insert 0CUSTOMER in every other info area.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
Sorry if i am too elaborate, I hope i have made my questions clear.

Hi,
ques 1: Is it since its a master data and contains the same set of master data for both the cubes, it has the same technical name?
A. same 0CUSTMER you can use the different places it holds same data.
source is the 0CUST_ATTR -> target is 0CUSTOMER.
ques 2: does all the 0CUSTOMER in different info areas, actually contain the same set of data?
A. it will contain the same set of data.
it has the overwrite function.
ques 3: if i search for 0CUSTOMER in InfoObjects section, i get 5 entries in different infoareas. How can there be diffferent Infoobject with same technical name be present in different info areas?
A. you triggered the 5 times for specif DTP means you will 5 entries for different info areas.
finally i will say you use the 0CUSTOMER no of places where you required and no need to create the ZCUSTOMER.
Thanks,
Phani.

APD - error when activating, problem: 7.0 variable with long technical name

Hello everybody!
I have got the following problem:
I created an APD, with one filter on 0calday using a variable. This variable was created on our own and works without any problems. It's a 7.0 variable with a long description "W_E_M_0CALDAY_WDLAS"
If I try to activate the APD I get an error message "Analysis Process Has Errors, Activation Is Not Possible" and "Variable W_E_M_0CALDAY_WDLAS does not exist actively". But this variable is active!
My colleague told me, that there seems to be a problem with long technical names of variables in APD. I tried to find a SAP note to this topic, but I didn't.
Had anyone else this problem? How was it solved? Or are there any SAP notes I didn't find?
Thanks for your help!
Bettina

In the meantime I copied the variable to a shorter name, but it still doesn't work. I tried it with a 3.x variable and a 7.0 variable. In the exit I first added an OR condition to the when-case, but this didn't also help. Afterwards I copied the whole coding in a separate when-clause.
Stil not successful. Factory calender is OK. The variables also work in a normal query but not in the APD - the result of the last workday is always '00000000'.
Any ideas?
Kind regards,
Bettina

Mapping of status CRTD,AALK with Technical names

Similar Messages

Maybe you are looking for