Mapping Planning Applications to Reporting Applications
Hi
I recently upgrade to 11.1.2 and found out the feature name Mapping Planning Applications to Reporting Applications
I complete all steps and then click on push data.
when I click "push data" I receive the following error, any advice?
TRANSFORM elasped time: 15
Push Data failed. Error: The dimension -1 is invalid.
dim1 is account where on the map dimension I choose "not linked"
then on the POV I have mapped between two accounts , revenue_s to revenue.
what is worng?
Thx a lot,
Hi Dude ,
is this issue resolved for you ? I am also facing the same issue .. please reply.
Similar Messages
-
11.1.2 Planning – Mapping Reporting Application
Hi John,
I was reading one of your blog
http://john-goodwin.blogspot.com/2010/06/1112-planning-mapping-reporting.html
I want to know what is the advantage of using "Mapping Reporting Application" over replicated partioning, and also what should be the real use of "Mapping Reporting Application"
One example of why you may want to use this functionality is you say you have a reporting database such as an ASO database reporting actuals and you want to push a proportion of the forecast/budget data from the planning application into the ASO model. It could also be that you have a number of different cubes that you need to push different areas of data to from your planning application
When I first read about this new functionality I assumed it would create a replicated partition and push the data to the mapped database, I thought it would manage the partition so it wasn’t destroyed with a refresh, this is not the way it works though but more about that later.Can you please explain me in detail about the way of working of this functionality
Thanks & Regards,
Avneet Singh BhatiaI don't know if there is any advantage, it is just a different way going about it, the planning method exports and then loads the data, is that better than a replicated partition I am not sure but everybody has there own opinions.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to map reporting application to Classic Planning?
Hi,
I'm having problem with mapping reporting application this is with reference for Smartlist, Please can you guide me on the steps...Have you gone through the steps at - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/map_man.html
I also went through the steps in a post - http://john-goodwin.blogspot.com/2010/06/1112-planning-mapping-reporting.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Map Reporting Application - Push Data process creating 40 MB size files
Hi all,
We have 6 map reporting applications in our Planning app. 2 of them push data to a BSO cube, 4 of them push data to an ASO cube. For the ASO cube ones, the process creates files that are about 40 MB size in the Essbase server under C:\Windows\Temp folder. The files are encrypted. I can't tell what the content is... The only reason I think the push data process creates these files is because of the date stamp of the files. They match the push data process.
Have you seen this? Is there a way to stop it? Since we run this process every hour and the files are pretty big, we run out of disk space pretty quickly. Our work around is to purge the files or delete them, but it would be ideal if we can stop this.
Any help?
Thanks,
MehmetHi Mehmet,
Which version of planning are you using?
Cheers
John
http://john-goodwin.blogspot.com/ -
Required application context reporting is not available
I've just installed HPM 11.1.1.1 (product: ESSBASE/foundation/planning/Financial reporting) and I'm now testing Financial Reporting.
I created a financial report as indicated in http://oraclebizint.wordpress.com/2008/06/07/hyperion-financial-reporting-getting-started
I can run this report in Financial reports (PDF view)
1. But I cannot run the report in HTML (Hyperion Workspace) : error "Required application context reporting is not available"
2. Besides I notice that in Workspace -> explorer the voice File -> Import -> "Financial Reports" is missing.
Maybe something was wrong in installation, but I did it twice .... and Diagnositcs reports no errors.
So, is there some more activity to be done on Workspace/Financial reports so that integration of these two products work correctly ??
(Note: installing on Microsoft windows 2003 server - deploying on Tomcat and IIS6 web server)
Regards
MarinaThis one has frustrated me to no end as well! One would think that when you install FR/WA they would automatically register themselves with Workspace as part of their configuration process (and one would be wrong).
The solution is to go back and run the configuration tool again. The only thing you have to select this time is Foundation Services... Workspace... Configure Web Server, then restart the two Workspace services. -
Give access for REPORTING application
hi gurus,
we have PLANNING, REPORTING AND RATE applications in our application set
one of my user able to access PLANNING application when he/she interface with excel
now I need to give access for REPORTING application
can anyone help what settings I have to set at SECURITY node
Thanks,
M.Munichandra babuHi,
You will have to go to the Member Access Profile that is related to that particular user and give access to the required application.
Karthik AJ -
Hi Team,
Request you to provide a document explaining all metrics available in Application Status Report.
Thanks & Regards,
Karthika RHi,
I'm not able to find a document explaining all metrics available in Application Status Report too.
You could open the report with the SQL Report Builder. In Report Builder you can find where the data from and the data structure.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
No Data to display in Application failure report for a specific Application
Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi SHi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Crystal Reports "Report Application Server"
Does anyone have any experience with Crystal Reports' Report Application Server (RAS)?
The provided documentation is very thin and support are taking an age to respond.
I want to use a Bean as a data source for a report. The blurb says you can do this, but the only documented way I can find is for the bean to return a ResultSet, completely missing the point of using a bean or EJB in the first place.
Now, Seagate's sales blurb states that Beans and EJBs can be used as data sources, but if the only way to do this is to return a common or garden ResultSet, what's the point of the bean???
So, has anyone sucessfully used a bean or EJB as a data source for report generation under RAS, or merely CR in general, without resorting to a ResultSet??Crystal Reports YUK!! especially in Java Forum!Tell me about it!!
But, like many developers, I don't get a choice. I have to use CR, and I have to integrate it into a Tomcat (4.1.24) based app. There is a Java API for RAS, but it is a pile of dung. Can you imagine publishing an API with public methods with 'do not use, for internal use only' plastered all over them!!!
But still, back to the original question, I have to find a way of doing this, but Seagate's javadocs are a mess, as are the howto docs. All of the examples, as you might expect, are childishly simple and don't give any insight into the large and hideous API :(
Here is an example of a CR howto.....
There appear to be two ways of creating a data source that isn't an existing report or a database query. This
Runtime data sources
One of the strengths of RAS over the Crystal Reports application, is that the RAS
can use data generated programatically at runtime. With a runtime data source,
you can take data from any source�such as a database, a data stream, or a flat
file�manipulate it with the programming language of your choice, and display it
with RAS.
To use a runtime data source
1 Put your manipulated data in a rowset form that can be processed by the RAS.
Consult the Rowset object and interface in the SDK JavaDocs, for details on
creating rowsets.
2 Create and fill the Dataset object with the rowset data.
3 Create a RowsetController object.
4 Add or set the data source using the RowsetController�s AddDataSource or
SetDataSource methods respectively.
The runtime data source is now available for use.
Note: If you create a report based on a data set, the data that is used is not saved
with the report. To populate the report with data the next time you open it, you
must either re-apply the data source to see current data, or access a saved version
of the data source for preview.
All well and good, but RowsetController doesn't have an AddDataSource or SetDataSource method!!!!
and this......
JavaBean custom data sources
You can use a JavaBean (or a Java class that does not extend the bean type) in order
to specify a custom data source. In order to do this, you will need to:
� Creating a Java class that specifies a custom data source
� Referencing a java class to provide data for a report
Creating a Java class that specifies a custom data source
To use a JavaBean (or a Java class that does not extend the bean type) in order to
specify a custom data source, you will need to create a class that serves as a Java
Beans Connectivity data source for creating Crystal Reports.
This class will need to conforms to the JavaBean standard by defining private
properties that are accessible only through get and set methods. In this way the
Crystal Reports designer can introspect the class as a Bean. The JavaBean
connectivity classes require the following.
� The constructor must have zero parameters.
� Methods that are used as "tables" must have a return type of ResultSet.
� Statement objects must be created using the
ResultSet.TYPE_SCROLL_SENSITIVE and ResultSet.CONCUR_READ_ONLY
arguments.
Note: Methods returning ResultSet can take arguments, these are treated as
Stored Procedure parameters by Crystal Reports.
Now, what the hell is the point of going to the trouble of abstracting your business data into a bean or EJB, if that bean has to return a ResultSet for Crystal Reports to use??!! -
How to create a deployment plan for an existing application?
Using WebLogic 10MP1.
I have an existing EAR deployment, and I want to create a deployment plan so I can make changes to it without changing the EAR file itself. My goal is to change the value of the "precompile" flag in all the web modules.
I've read the documentation on creating deployment plans, and it doesn't seem like it's doing anything. That is, I was able to run "weblogic.PlanGenerator" from the command line, but that's about my only success.
The doc says that if you make a change to the app config and save it, that will prompt for a place to save the deployment plan. This seems odd, as I'm pretty sure I've never seen a prompt like that before. It didn't happen for me. As a test, I tried changing the "Deployment Order" field. I activated it, and then I changed it back and activated that. No deployment plan prompt.
I then read that if there is a "plan" subdirectory off the application root containing the deployment plan, WebLogic will use that at deployment. So, I created a "plan" subdir in my EAR tree, put the generated (from "weblogic.PlanGenerator") plan there, and restarted. I didn't notice any log message about the plan, and when I logged into the console to check the "Deployment Plan" tab on the deployment ("Tuning Parameters" subtab), it says "No variables present".
I must be missing some simple detail.In case anyone else ever has this problem, I've been able to resolve this.
I used "weblogic.planGenerator" on the command line to get a deployment plan to start with. The obstacle I had was actually finding the "Update" button. For some reason I had thought this button the docs refer to was on the "Deployment Plan" tab in the configuration of the deployment. It's actually on the list of the deployments, and is active when the deployment you want to configure is checked.
Once I got there, I was able to enter the path to my deployment plan, which I edited to produce the result I wanted (turning on "precompile" on most of the modules). Once I stored all that and restarted my server, I was able to verify that the server was precompiling on deployment (although it's hard to tell if I don't have any JSP compile errors. :) ). -
Deployment of a crystal report application with visual 2005
Hello all,
I am very new at .NET, and this is my first post to this forum.
I've created a report (example.rpt) with Crystal Reports 2008. Then I've installed "Crystal Report for visual .net 2005 component".
Then I've imported it in a vb.net project using its Crystal Report Application Template, complied it and succesfully tested it on my machine.
My next objective is to manage the deployment of my report on the end-user machine. Here started my problem.....
Following suggestions I found on the net, I tried to create a Setup Project to deploy my application including Crystal Report runtime components; the report is included in the project as an embedded resource. Apparently the setup project as been correctly builded; if I run it my machine everything is ok but on end-user machine it generated this error:
EventType clr20r3, P1 reportarts.exe, P2 1.0.0.0, P3 49feecfc, P4 reportarts, P5 1.0.0.0, P6 49feecfc, P7 e, P8 c6, P9 system.invalidoperationexception, P10 NIL.
I tried on different windows SP2 - SP3 machines, with .NET Framework 2.0 alredy installed but the error is the same.
Can you Help me please???????? THANK YOU in ADVANCEHi,
I have notice that
I've created a report (example.rpt) with Crystal Reports 2008. Then I've installed "Crystal Report for visual .net 2005 component".
Is that meam you have developed the reports in CR 2008(Seperate product) and installed CR for VS2005 (CR 10.5) and using CR 2008 reports in CR 10.5 environment?
Would like to inform that CR 2008 and CR 10.5 which comes with VS2005 are completely different and if in case you are converting the CR 2008 reports to CR 10.5 then you need to be careful for deployment because the correct runtimes should be installed on the deployment system.
You can check the integrated CR with VS by opening VS environment and go to help - about - and check the CR version.
If you are using the VS 2005 CR 10.5 then click [here|http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/cr_net_2005_mergemodules_mlb_x86.zip] to install latest merge modules.
Hope this helps!!
Edited by: Amit Singh on May 5, 2009 6:07 PM -
Problem when deploying Crystal Report application on weblogic 10.3
I created a Crystal Report application, using Eclipse ,
but when i tried to run the correspondant EAR on Weblogic 10.3
i encountered this exception , i guess it is a missing JAR but i didn't know which one :
Error 500--Internal Server Error
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize class org.apache.commons.configuration.ConfigurationUtils---- Error code:-2147467259 Error code name:failed
at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:54)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.(SourceFile:703)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662)
at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504)
at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77)
at com.businessobjects.report.web.b.a.ac(SourceFile:681)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76)
at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129)
at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils
at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642)
at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222)
at org.apache.commons.configuration.XMLConfiguration.(XMLConfiguration.java:171)
at com.crystaldecisions.reports.common.engine.config.apache.CrystalConfigurationImpl.pushXmlConfiguration(Unknown Source)
at com.crystaldecisions.reports.common.engine.config.MultiThreadedConfig.pushXmlConfiguration(Unknown Source)
at com.crystaldecisions.reports.common.engine.Engine.configure(Unknown Source)
at com.crystaldecisions.reports.common.engine.Engine.getConfigurationManager(Unknown Source)
at com.businessobjects.reports.sdk.a.a(SourceFile:68)
at com.businessobjects.reports.sdk.a.do(SourceFile:106)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.n(SourceFile:2687)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.i(SourceFile:2807)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.connect(SourceFile:296)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.(SourceFile:216)
at com.businessobjects.sdk.erom.jrc.a.(SourceFile:43)
at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46)
... 27 more
***************************************************************Hi ,
I succesfully added the jar to the classpath but i got the same error ( the first one),
i wonder if it is a problem due to the connection with the remote database because of those 3 lines :
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils
at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642)
at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222)
at org.apache.commons.configuration.XMLConfiguration.(XMLConfiguration.java:171)
here is the full log :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[weblogic.servlet.internal.WebAppServletContext@1aee513 - appName: 'FinalEAREssai', name: 'EssaiEarCR', context-path: '/EssaiEarCR', spec-version: '2.5', request: weblogic.servlet.internal.ServletRequestImpl@1302951[ GET /EssaiEarCR/CrystalReport1-viewer.jsp HTTP/1.1 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; fr; rv:1.9.0.14) Gecko/2009082707 Firefox/3.0.14 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: fr Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cookie: ADMINCONSOLESESSION=MG10Kq5JT9LkDTXqKJMGRJQBJbKZ1ryfT4g5TJGGpltbST3Gjphq!40961007; JSESSIONID=Q2x0Kq6Lv5QT082psRwrmRpfNfnqPDRdF8tsMg9Czb5vQTPh9ZKH!40961007 ]] Root cause of ServletException. com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Could not initialize class org.apache.commons.configuration.ConfigurationUtils---- Error code:-2147467259 Error code name:failed at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:54) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77) at com.businessobjects.report.web.b.a.ac(SourceFile:681) at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76) at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129) at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: Could not initialize class org.apache.commons.configuration.ConfigurationUtils at org.apache.commons.configuration.AbstractFileConfiguration.setURL(AbstractFileConfiguration.java:642) at org.apache.commons.configuration.AbstractHierarchicalFileConfiguration.setURL(AbstractHierarchicalFileConfiguration.java:222) at org.apache.commons.configuration.XMLConfiguration.<init>(XMLConfiguration.java:171) at com.crystaldecisions.reports.common.engine.config.apache.CrystalConfigurationImpl.pushXmlConfiguration(Unknown Source) at com.crystaldecisions.reports.common.engine.config.MultiThreadedConfig.pushXmlConfiguration(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.configure(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.getConfigurationManager(Unknown Source) at com.businessobjects.reports.sdk.a.a(SourceFile:68) at com.businessobjects.reports.sdk.a.do(SourceFile:106) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.n(SourceFile:2687) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.i(SourceFile:2807) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.connect(SourceFile:296) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(SourceFile:216) at com.businessobjects.sdk.erom.jrc.a.<init>(SourceFile:43) at com.businessobjects.sdk.erom.jrc.ReportAgentFactory.createAgent(SourceFile:46) at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.<init>(SourceFile:703) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:662) at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:632) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.if(SourceFile:504) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(SourceFile:669) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(SourceFile:77) at com.businessobjects.report.web.b.a.ac(SourceFile:681) at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(SourceFile:182) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(SourceFile:100) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(SourceFile:76) at jsp_servlet.__crystalreport1_45_viewer._jsp__tag0(__crystalreport1_45_viewer.java:129) at jsp_servlet.__crystalreport1_45_viewer._jspService(__crystalreport1_45_viewer.java:75) at weblogic.servlet.jsp.JspBase.service(JspBase.java:34) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3498) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
thanks Vijay for you help -
Load Report Failed - Report Application Server Failed error at runtime
Hello, I'm pretty new to Crystal Reports so please bear with me.
I just installed CR 2008 on my development box, which is running VS2005 .NET 2.0. I changed over all of my assembly references in my web.config to the new version:
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral,
PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
Also the webpage that is displaying the ReportViewer object has this reference as well:
<%@ Register Assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
Now, in my code behind I am simply trying to open a pre-built crystal report that came in the sample pack
When I try and do this in our already built website I get an error:
"Load report failed"
With the inner exception saying:
"The Report Application Server failed"
This same piece of code works perfectly if I build a new website, however when I try and impliment this into our existing code base I get the error shown above. Also the samples I've used all use .NET 3.5 and the website is in 2.0. I'm not sure if that is a factor or not but that is also another piece of information that could be useful.
Any help on this matter would be greatly appreciated. Thank you for you're time.
Chris McMahan
Edited by: Arithal on Aug 4, 2009 8:36 PMAnd finally the stack trace. Sorry for the length of these posts.
[COMException (0x800001f5): The Report Application Server failed]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +575
[CrystalReportsException: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +646
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1374
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +169
Report_Viewer_Crystal_CrystalView.ConfigureCrystalReports() in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:49
Report_Viewer_Crystal_CrystalView.Page_Init(Object sender, EventArgs e) in c:\Inetpub\wwwroot\Report Viewer\Crystal\CrystalView.aspx.cs:33
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
System.Web.UI.Control.OnInit(EventArgs e) +99
System.Web.UI.Page.OnInit(EventArgs e) +9
System.Web.UI.Control.InitRecursive(Control namingContainer) +321
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +834 -
Application Server Report Path
Dear Oracle Gurus
I am new to this area of expertise. We have a peculiar problem. Let me try to explain this
We are running Oracle Appication server in Windows based environment( windows server 2003 i presume)
we have multiple projects running in this server. Two of our projects are almost similar and identitcal. They share the same name for forms and reports but the content will be different.
The problem is when we execute a call to a report from our application, the report with the same name from other project gets executed.
I discussed this with our Hardware and network engineers. They said that the path to find the reports is specified in the windows registry file where it is specified that the folder of the other project is given first and then our project folder is specified next.
Tempororily , they put our project folder's name first.
I beileve that there should be some other better and permanant solution for this
can anyone help me out in this
with warm regards
ssrHi ssr,
the best way is to create two or more report server with different names. For each report server you can define a sourceDir and tempDir. You must enter the values of the sourceDir and tempDir in the*.conf File from the reportserver. You will find the *.conf-File in the following directory: $ORACLE_HOME\reports\conf The name of the file is <reportservername>.conf. It is a XML-File. IN Line 15 or 16 you find the Part for the sourceDir and tempDir. After that you must restart the report server.
Call from Forms:
Wenn you call the application you use a "?config=..." part in the formsweb.cfg. Then you must use two diferent *.env-Files. In each *.env-File you add a new environment parameter. Excample REPORTSERVERNAME=.... In your Forms application you can read this parameter with TOOL_ENV.getvar('REPORTSERVERNAME', l_name); And than you can controll wich application use wich reportserver. In our enviroment it works fine.
I hope that helps a little bit.
- Sven -
Getting "The Report Application Server failed" when trying to view a report
I'm getting an error pop up:
Crystal Report Windows Forms Viewer
The Report Application Server failed
OK
When trying to display a report using the Crystal Reports viewer (as shipped with VS2008)
The stack trace implies it's having problems rendering the first page of the report:
System.Windows.Forms.dll!System.Windows.Forms.MessageBox.ShowCore(System.Windows.Forms.IWin32Window owner = null, string text, string caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Windows.Forms.MessageBoxDefaultButton defaultButton, System.Windows.Forms.MessageBoxOptions options, bool showHelp) + 0x220 bytes
System.Windows.Forms.dll!System.Windows.Forms.MessageBox.Show(string text, string caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) + 0x18 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.MainReportDocument.GetPage(CrystalDecisions.Shared.PageRequestContext context = {CrystalDecisions.Shared.PageRequestContext}) + 0x6a9 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.ReportDocumentBase.GetPage(int pageN = 1) + 0x1a3 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.DocumentControl.ShowNthPage(int PageNumber = 1) + 0x79 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.DocumentControl.ShowFirstPage() + 0x48 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.PageView.ShowFirstPageEx() + 0x1ec bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowReport() + 0xea bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.CrystalReportViewer.OnPaint(System.Windows.Forms.PaintEventArgs evtArgs = {ClipRectangle = {System.Drawing.Rectangle}}) + 0x182 bytes
System.Windows.Forms.dll!System.Windows.Forms.Control.PaintTransparentBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle, System.Drawing.Region transparentRegion = {System.Drawing.Region}) + 0x16c bytes
Any ideas how to fix this?There is a good process for getting bugs fixed. However, you will have to provide a reliable way of reproducing the issue. E.g.; I can not go to R&D and ask that they fix a bug with a report that sometimes works and sometimes does not work.
I suspect the best way to approach this, will be to actually see the report and try to determine what part of the report may be the issue. To be able to share the report, you will have to create a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
and discuss this at length with a support engineer.
Ludek
Maybe you are looking for
-
Adding More Than One Movie to a DVD
I am making iDVDs that are just about 15 minutes long. Since the dvd I am using holds up to 4.7 gigabytes, I would like to add more than one movie to a dvd project. How do I do that?
-
Cannot cutomize ALL of JFileChooser - what are the property names?
Setting the UIManager property JFileChooser.homeFolderToolTipText to some value seems to have no effect on my machine running jdk 1.4.1. I am able to customize most of the JFileChooser, for instance changing this property does work JFileChooser.lookI
-
Can I view a TV show from my PC iTunes to MacBook with sharing via iTunes?
The TV show shows up in the shared library file on my MacBook. Seems I am having trouble with this; will not load the TV show via my shared library in my MacBook. I am coming to the conclusion that you cannot watch a TV show in my MacBook iTunes from
-
When using an external hard drive RAID which connection will provide the best performance for VIDEO EDITING? I know USB 3 has up to 5Gbits/s but is it the best option when editing video?
-
OCS 2007 R2 Patching problem - Microsoft Office Communicator 2007 R2 Hotfix KB 2755391
Hi, Unable to patch Hotfix KB 2755391 in Microsoft Office Communicator 2007 R2. The following error occurred when started the installation of communicator.msp package file "Windows Installer: The upgrade patch cannot be installed by the windows insta