Mapping Problem in Transformation

Hi Experts,
I have couple of InfoObjects defined in an InfoCube and they are all assigned directly with the SourceFields but now the requirement is to map an InfoObject's Attribute to another InfoObjects via Routine.
Can anyone tell the steps to follow in the above case ??
I have tried to make the problem more clear with below example :
Suppose, the following SourceFields have 'Direct Assignment' with following InfoObjects like this :
Source Fields ---> InfoObjects in Cube
.........a ........ ---> ..........x
.........b ........ ---> ..........y
.........c ........ ---> ..........z
Now if 'w' is an attribute of 'x' then how can I map 'w' with 'z'.
I hope I manage to make my question clear
I will definitely assign points as a way of saying Thanks.
Regards,
Akash

Dear Akash
Follow the Steps
Select the info object "X" & Double click
In the Rule Details, Select the " + " Symbol in Source Fields of Rule.
Another one window wil get populate with all the info object lists.
Here you can Select the "w" attribute to "X".
Hope this will help you.
Please make a touch, Still you have any problems.
Regards
Saravanan.ar

Similar Messages

BPM problem: mapping in a transformation step

Hello,
In my current BPM scenario....
1)I created the interfaces below for the Receive step (receives MT_Request):
-MI_async_BPM
-MI_async_abstract
2)Then I created the interface and mapping for the transformation step:
-MI_JDBC_async_abstract
MM(MT_Request to MT_Request2)
IM(MI_async_abstract to MI_JDBC_async_abstract)
3)Then I created the interface and mapping for the Send step:
-MI_JDBC_async_in
MM(MT_Request2 to MT_DB_Insert)
IM(MI_JDBC_async_abstract to MI_JDBC_async_in)
Problem:
However, after I executed the scneario, it appeared the step 2) didn't go through correctly(error message:NO_RECEIVER_CASE_ASYNC). Did I set up the configuration wrong in Integration Process?
Also, I went back to ID to create a Receiver Determination for step 2) (thought this may clear the problem), but in the Sender tab of Integration Process object, MI_async_abstract was not in there. Please give me a hand on this problem. Thanks.
Regards,
Steve
Message was edited by: steve peng
Message was edited by: steve peng

Hi Steve,
Below is the explanation for correlation by Anand Torgal which i think will be helpful to u....
To explain you the correlation in simple terms...take a simple example of BPM with a send step(async request) and receive step(async response). I am sending a PO request using the send step and waiting for a PO response using the recieve step. Assume that i have two instances of this BPM running i.e two PO request's going simultaneously. when i get the response back for these two requests , there will be two recieve steps waiting for the response since there are two instances of BPM running. the response need to be assigned the corresponding requests. This is where correlation comes into picture. I can use PO number as my correlation field. i.e I activate my correlation in the send step and use this correlation in receive step (this is configurable in BPM).
Example: PO number needs to be part both request and the response message structure.
BPM instance1:
send step -> activate correlation -> send message with PO Number1
Receive step -> use correlation -> receive response message with PO Number 1.
BPM instance1:
send step -> activate correlation -> send message with PO Number2
Receive step -> use correlation -> receive response message with PO Number 2.
There are many different scenario's whre you can use the correlation..this is one of them...The weblog shows another way of using correlation.
Also Refer SAP help...
Correlating Messages
Use
You use a correlation to assign messages that belong together to the same process instance. A correlation joins messages that have the same value for one or more XML elements. A correlation is therefore a loose coupling of messages: at design time, it enables you to define which message a receive step must wait for, without knowing the message ID.
For example, in a process, receivestep_1receives the message purchaseorder, while receivestep_2receives the message salesorder. Receivestep_1creates a correlation that defines that the corresponding sales order must have the same purchase order number. Receivestep_2uses this correlation. This means that an instance of the process processes a purchase order and the corresponding sales order, which has the same purchase order number.
If it satisfies the relevant correlations, a message can be processed in multiple processes. However, a message is only delivered once per process.
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/content.htm
Regards,
Abhy

Problems with transformation; infoobject not updated in DSO.

Hi all,
We are having some problems with one of our transformations between PSA and DSO.
Suddenly some of the fields are not filled in the DSO. The mapping for field Sales order number worked fine, and then I added an infoObject in the DSO to hold the info for Sales order item. I also replaced the infoobject that was supposed to hold the sales order number. After this, none of the two fields has any data in DSO. I checked the PSA, and the data is available here. I tested the rule in Rule details and for sales order number it gives the correct result, but for sales order item it gives a runtime error; assertion failed. I checked on SAP Notes, and found 929934. But the corrections are already added in our system.
Has anyone got any ideas on what to do?
BR,
Linda

Hi,
There are a number of problems in Transformation when either a source field or target field is changed.
This can lead to inconsistent transformation.
You can raise a message to SAP or best thing is if possible delete the Transformation and create a new one.
Regards,
Nitin

Problem in Transformation rule in BW due to change in Table FieldName

Hi Everyone,
we already have a DSO, IC & MP in BW..
now we want to add a new field in R3 & same has to be replicated in BW as well. we have added it successfully.
but my problem is in Table we have changed the field name of one of the object(from ZGROUP to ZMARKET) which we already had one-one mapping in the transformation rules from DS to DSO.
now when i replicate my datasource & try to edit the transformation(to map the IO in DSO to changed field name of DS), it is giving a message "Field ZGROUP used in a rule does not exist in the source".
Do we have any other option other than changing the filed name back to ZGROUP in table & do the mapping successfully & activating the transformation rules?
Regards,
Pavan

HI Rahul,
This is the what i get when i click on that message:
Field ZGROUP used in a rule does not exist in the source
Message no. RSTRAN750
Diagnosis
Field ZGROUP used in a rule no longer exists in the source, but it existed when the transformation was created.
System Response
The rule is marked as invalid and is deleted.
Procedure
If you need the rule, add the missing field to the source before saving.
Regards,
Pavan

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping problem - Shaded areas in the wrong place

Hey experts,
I`ve already contacted you on this issue a few days ago. I created a query, which executes a few key figures mapped to the postalcode.
I tried to let me display this query on the web, using the WAD. The shapefiles were uploaded correctly, for the contours of the country and the postalcode areas are displayed accurately.
At the first sight, I thought a performance problem could be the challenge. But I did not find any information on that. On my last post, i received one answer, that I had to adjust the sort order. But that did not bring any results either!
At the moment, it looks more like a mapping problem in the dBase File to me. How can a proper mapping be achieved? I tried to just add a SAPBWKEY column, like it is proposed here: http://help.sap.com/saphelp_nw04/helpdata/en/3b/7c92ec1bed374ee0000800091c1b0e/content.htm.
An extract of my dBase-File schematically looks like this:
0country, 0Postalcod, SAPBWKEY
DE 48900 DE/48900 (for it is a composite attribute)
The mapping seems to work in a rather random way, because the shaded areas are at least displayed somewhere on the map, but not where they supposed to be, e. g. one district of south Germany in the far north and so on.
Did you have any similar issues in the past or any tips for a solution?
Thanks&regards
Marcus

Sorry, I guess this is just a bug in some programs including firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=314279

Mapping Problem ORDERS Idoc to Edifact

Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
Dominic

Dear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1 E1EDK14-QUALF = '014'
 E1EDK14-ORGID = 'YP01' <= purchase organization
2 E1EDK14-QUALF = '009'
 E1EDK14-ORGID = '001' <= purchase group
3 E1EDK14-QUALF = '013'
 E1EDK14-ORGID = 'NB' <= document type
4 E1EDK14-QUALF = '011'
 E1EDK14-ORGID = 'C999' <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF --------
Constant(009) ---------------- EqualsS ---------------
 And(Boolean Function) ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID ------- E1EDK14-ORGID ----------------
Constant(001) -------------- EqualsS ------------------
Regards,
P.Venkat

Weird dreamweaver keyboard mapping problem

weird dreamweaver keyboard mapping problem:
Hope this solution helps someone out. If you have q's, ask
and I will try to help.
I was having a weird problem in dreamweaver... Whenever I was
in code view and typed "shift+i" to make a capital "I", instead it
would paste from the clipboard.
I finally figured out what was happening. I compared the
menu.xml in my app support folder in the user library to the
original menu.xml file that was in the application folder. I went
through until I came across the diff:
menu.xml in my library/app support folder:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
orig menu.xml file:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
There was a diff in the "platform=" tags. The orig stated
[platform="win"], my config stated [platform=""] (nothing in
between the ""'s). So, I reset the platform tag to be
[platform="win"] in my settings and then relaunched dreamweaver. It
fixed the problem.
Not sure how this occurred, but it works now.

JDBC- XI- File Mapping Problem

Hi everyone,
I have the mapping problem. atried a lot of possibilities, but unfortunately nothing helps... JDBC adapter returns (in my case - I'm just selecting SYSDATE from dual) this structure
<resultset>
<row>
<SYSDATE>....</SYSDATE>
</row>
</resultset>
I'm using 2 datatypes:
a, row (it is called so) which is complextype and consists of subelement SYSDATE, which is string
Exastly: row->SYSDATE
b, resultset (it is called so) is complex type which consists of subelement of type row(type a - see above) (and this subelement is also called row) ...and it has of course subelement SYSDATE, which is String (see the data type a above)
Exactly: resultset->row->SYSDATE
The data type b is used for the outbound interface in the message coming from the JDBC Adapter, the type a is used for message type sent into the File Adapter
(exactly: Message1String is the ResutSet Type(b), Message1String2 is the Row(a) type)
Can somebody help me, what is wrong? I do always get mapping error... :O(
Thanx, Peter

So your message type has a different name?
Take the name of your message type and link this to "document name" of your JDBC adapter configuration.
Compare the xml output of the JDBC adapter (take this from the SXMB_MONI payload) with the default structure of the mapping (go to the mapping tool, test mode, create a new test and view the xml structure)
Regards
Stefan

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Mapping problems

Hi,
I posted this thread in Designer section but I think this place is more appropriate.
I have a mapping problem. In my process I have two forms with the same xml schema binding to this forms.
The first form is prefill with his informations (name, division, email etc ...), his superior informations and he can choose and fill a new superior.
Once the form is fill and send, the new superior received the form with the completed informations.
I use a setValue to extract the name of the superior and to associate it with an Assign Task and map the data of the first form into the second form and it works.
After the second form is approved, I need to exctract some other informations but whatever I can do, all the values are null. However when I extract data from the form with the function xfa.host.exportData(); the data xml is fill with the correct information.
In my first setValues I map the field login of my form with this xpath :
location expression
/process_data/@nplusun /process_data/FormInit/object/data/xdp/datasets/data/FormulaireA/Nouveau/login
and the data
/process_data/FormEtape2/object/data/xdp/datasets/data /process_data/FormInit/object/data/xdp/datasets/data
It works.
In my second setValues I do :
location
/process_data/@name /process_data/FormEtape2/object/data/xdp/datasets/data/FormulaireA/Ancien/NomPrenom
I try with serializable, with an xml variable associated to the same schema than my form.
Thank You for helping me

Ok I find the answer to my problem. It seems that I need to map the field one by one because if I map like this /process_data/FormInit/object/data/xdp/datasets/data to /process_data/Form2/object/data/xdp/datasets/data when I export data from the form2 I have this : /><FSFORMQUERY_ >/Jeudi26/Formulaires/FAWSv2.pdf</FSFORMQUERY_ (form A) and this /><FSFORMQUERY_ >/Jeudi26/Formulaires/FAWSv2Etape2.pdf</FSFORMQUERY_ (form B) I don't understand why. Mapping field one by one works. If someone can explain it to me, I thank you.

Mapping Problem in Transformation

Similar Messages

Maybe you are looking for