Mapping Production prder

Hi.Experts
Kindly replay me how we map a production order no. from one Purchase order????
Regards
Arun

Dear Arun,
In my understanding there is no relationship between a production order and a purchase order.
A Production order can be triggered from a planned order and a purchase req,can be converted into a purchase order.
Come back with your further queries.
Regards
S Mangalraj

Similar Messages

  • How to map Product Group for the Materials in BW.

    Hi All,
    We have an requirement for one of the report called as Progress validation Report.
    We have to craete thsi repotr which would pulll out Inventory value, Production Plan value, Total Lates, Current week deliveries and WIP for a quarter.
    Cube whihc provides details about production plan has data by Material, plant and product group wise.
    But rest of the cube from which we extract the key figures does not have data by Product grop wise.
    Product group is been picked from PGMI table in R/3.
    How I can related the materials  which are in other cube to the respective Product group.
    Material and the relevant prdoct group data doesnot flows in BW.
    There is even a scenario where ahve seen a material falls under 2 product groups..
    PLease guide as how i can realted already existing materials in the Cube to the product group.
    Points will be assigned
    Thanks & Regards
    Vaishali Patil

    Hi,
    Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
    Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
    If the maintinenece in master data is nopt possible then you got to populate the same in cube.
    There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
    There is one more way to have this but which is performance intensive.
    You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
    I hope it will help.
    Thanks,
    S

  • HT6114 help! since moving to Mavericks i am unable to save *.gpx files when using online mapping - this did not occur with Mt Lion and is highly annoying - the mapping product is SATMAP which i have used on PCs for several years -

    I have used Satmap online mapping for several years on a PC
    Now moved to Mac and all was ok until i moved to Mavericks!!
    I can no longer save *.GPX files to the Mac - it appears to do everything except actually saving the file
    Any ideas before i have to buy another PC would be helpful
    This is using Safari I have also tried Firefox all software is up to date
    this is on my Imac and Macbook Pro both 2013

    I have used Satmap online mapping for several years on a PC
    Now moved to Mac and all was ok until i moved to Mavericks!!
    I can no longer save *.GPX files to the Mac - it appears to do everything except actually saving the file
    Any ideas before i have to buy another PC would be helpful
    This is using Safari I have also tried Firefox all software is up to date
    this is on my Imac and Macbook Pro both 2013

  • How to map product barcode with SAP

    HIIIIIIIIIIII
    We are going to implement SD module for stores. my client requirement is once when ever customer bring products from store to cash counter the scaner will check the bard code based on that we need to be process order to cash backgroud.
    This process need to be cover  SO, RETURNS, CREDIT MEMO, DEBIT MEMO ALSO
    Kindly guide me for acheving this requirement.
    Thanks in advance
    srinivasa

    Hi,
    A barcode is an optical machine-readable representation of data, which shows data about the object to which it attaches. In material master, in basic data 1 there is a field for EAN/UPC (Universal Product Code). In this field the bar code data are entered like 987654321098. The scanner reads this code and recognizes the code. Since UPC code is entered in Basic data of the material master, the material code given for the product in SAP is determined. This is the way bar coding is used to recognize the materials in SAP.
    Regards
    K Bharathi

  • PDF.js will not property display large maps (from ESRI mapping products).

    Test PDF at: http://www.sloplanning.org/gis/mapimagepdf/RuralCDMaps/Rural%20South%20County%20CD.pdf
    The PDF downloads VERY slowly (more than 2 minutes on a fast connection) in Firefox, but only seconds in Chrome or IE. When the PDF is rendered, most of the graphic elements within the PDF are missing; comparing the PDF image between FF and Chrome is stark. A good test is to wait through the long download in FF, then press the 'download' button and compare the resulting image displays. The 'downloaded' version has the graphics that are missing from the in-browser display.
    At the moment we're stuck telling our clientele to not use FF. :(
    In my testing, this is occurring in v27.0.1 of FF on Windows 7; I'm not certain of all the configurations for our clientele where this is also occurring.
    Thanks,
    Steve

    Hi Steve,
    I have filed a [https://bugzilla.mozilla.org/show_bug.cgi?id=986783 bug] for this issue.
    I can currently running our beta version (29) on Windows 7 and I can reproduce your issue.
    I can't think of a reason why this is happening so I filed a bug but if somebody comes along and knows why, then we can figure it out then.
    Thanks!

  • Map Scenario Goods Issue to Production without PP Module

    Hi All
    In one of our client have Implemented PS & all basic module in customer project. Now they want to map their production activity under one of the WBS but they don't implemented PP module. So how to do goods issue process for semi finish or finish material which contain BOM. Is it possible to map production scenario in PS without PP module ??
    As per my knowledge by creating internal activity we can manage cost for each operation as we maintain in routing but how to make goods issue of child material to parent material in BOM.
    Regards

    Hi Ahemad
    I already search forums before post to fulfill my requirement. Assembly items are created in network activities and are represented as reservations with negative quantities.You can assign an assembly item to an activity either manually, by entering a negative requirements quantity, or by using BOM transfer. can you focus more light on this as I tried this scenario I face the problem with negative quantity
    Regards

  • Source system in Development & Quality & Production

    Dear Experts,
    Normally we do developments in Development server,so we create source system connection to R3 Development server (say 120) and create DataSources, DTP and process chains based on the Source system 120.
    Now my Doubt is when we transport the developments to QAS, how will i get the data from R3 Quality Server 500 (because my developments -DataSources, DTP,Infopackages and process chains are connected to R3 dev 120).
    how should i do this?
    Please give me your valuable inputs.
    Regards
    BI Learner

    Hi Friend,
    In general this connections done by Basis people.
    So in your case automatically mapped quality r/3 to bw quality, but first replicate changes from r/3 quality to bw quality before moving changes from bw dev to bw quality.
    this scenerio is normal wherever you go either in production perspective also.
    SAP BW(Dev)---->SAP BW(Quality) and simaltaneously mapped SAP R/3(120)--->SAP BW(Dev),SAP R/3(500)---->SAP BW(Quality)
    llly mapped production also, this is general landscape.
    I try to give scenerio and hope it should helps out.
    Thanks-RK

  • Mapping of Multiple occurences of source field to target

    hi,
    my scenario is flat file to idoc.
    my flat file structure is as below:
    docheader
    product1
    product description1
    product2
    product description2
    in idoc,i need to map product to E1EDP01 and product description to E1EDP19 which occurs inside E1EDP01.
    now if i directly map product node to E1EDP01 node and product description to E1EDP19,
    Product                     --> E1EDP01
    Product description      --> E1EDP19
    i will get 2 E1EDP01 nodes .but each E1EDP01 node will be having two E1EDP19 nodes corresponding to incoming 2 product description.
    E1EDP01     -->  Product1
    E1EDP19     -->  Product description1
    E1EDP19     -->  Product description2
    E1EDP01     -->  Product2 
    E1EDP19     -->  Product description1
    E1EDP19     -->  Product description2
    how to do the mapping such that my first product description goes into first product target mapping and my second product description goes into second product mapping?
    E1EDP01     -->  Product1
    E1EDP19     -->  Product description1
    E1EDP01     -->  Product2
    E1EDP19     -->  Product description2
    thanks,
    Anuradha

    Could you give us more information posting the MT used for the file?
    Do you have always only 2 products in the file?
    About mapping I suggest you to see the following blogs:
    /people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
    /people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
    /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii

  • Issue in Geo map content

    Hi,
    I am facing an issue in geo map content with TM 9.1 where when I select show  map in transportation cockpit I get a dump-
    ERROR: Error in HTML_ISLAND "VISBIZ_ISLAND" of view "FPM_VISBIZ_UIBB.V_VISBIZ": To use a UI element of type HTML_ISLAND, the application must be executed in the "Standards" browser mode (termination: RABAX_STATE).
    I have already done the below enclosed config-
    a) Map product ID-HERE_NORMAL
    b) Map server- http://1.maps.nlp.nokia.com/maptile/2.1/maptile/newest/normal.day/{LOD}/{X}/{Y}/256/png?token=OvJJVLXUQZGWHmYf1HZCFg&app_id=TSCNwGZFblBU5DnJLAH8
    c) Map layer stack ID-HERE
    d) MAP product assignment- here MAP LAYER NAME-BASE and MAP PRODUCT ID-HERE_NORMAL
    e) Application-TM_TNC
    f) MAP LAYER STACK assignment- Here there are 2 values speciifed a) Default  b) HERE which is marked as default
    Aalso for point b, for MAP PRODUCT ID-HERE_NORMAL when I clicked on test server entry for the URL enclosed ,I have attached the jpg also where its showing blank.
    http://1.maps.nlp.nokia.com/maptile/2.1/maptile/newest/normal.day/{LOD}/{X}/{Y}/256/png?token=OvJJVLXUQZGWHmYf1HZCFg&app_id=TSCNwGZFblBU5DnJLAH8
    Can you tell me how to resolve the issue

    We need really be thankful for Marcus' patience. Let us hope that next question will not be: "What is a menu bar?" ;-)
    Thanks Marcus for your help all the time to any questions.
    Rajiv
    PS: 7:1 rules ;-)

  • Making Your Own Map Component in crystal xcelsius 2008

    Post Author: sam pewgo
    CA Forum: Xcelsius and Live Office
    It was disappointing that one could not make or import users own maps into CX 4.5has this issue been resolved in CX 2008?? Thanks in advanceSam

    Post Author: sam pewgo
    CA Forum: Xcelsius and Live Office
    Thanks DHAGIts a shame that we have hundreds of our own maps that we cannot use in Xcelsius and we are reluctant to buy any more, especially when they are none proprietory types, we need to use maps such as ESRI, MAPINFO or DWG types. Business Objects already know this of course as their Crystal Reports communicates with ESRI Arcview/ArcGis mapping products.Please update this product to use these, or make piece of software that will allow us to make our own map components and import them into XcelsiusAPART from my little blast! that said its a great productSam

  • Production Planning in IS-Retail

    Hello all,
    I was wondering if it is possible to use Production Planning if IS-Retail industry Solution is activated. I know that materials are converted to articles in IS-Retail, but I don´t know if this could affect the process of production planning.
    Thanks in advance.
    Ezequiel

    Hi,
    You can use PP module in IS Retail too!!
    But, following functions not support in SAP Retail
    (a) Long-term planning: You cannot maintain specific data for long-term planning for articles.
    (b) Co-product production: You cannot create specific data for co-product production (for example, apportionment structure for costs) for articles. You can map production transactions with by-products in the bill of material, using articles with a negative quantity
    Bye,
    Muralidhara

  • Product-profit center

    Hi guys,
    Rules & any documentation to map Product categories from legacy system to Profit centers...unable to approach the issue...any help...thanks

    We created a custom infoobject for our legacy products. Inside that custom object we added profit center as an attribute.
    When loading the data from your legacy system you have the product, in the update rules map the profit center as a attribute of what ever product is in the record.
    Done.

  • Web map server - data in Oracle Spatial

    We are searching for "web map server" which take data directly from Oracle Spatial (Locator). For this project the tools like ESRI ArcSDE, ArcIMS are too expensive. What are other product on the market? It should provide basic map navigation, spatial querying (klick on the map shows atribute data of features in active layers), serching by atributes.
    Regards,
    Sašo

    Oracle's web map server product is the Application Server 10g MapViewer. See www.oracle.com/technology/products/mapviewer/index.html
    For other mapping products that work with Spatial/Locator see
    http://www.oracle.com/technology/products/spatial/spatial_partners.htm

  • Google maps or Virtual Earth

    Centigon has a nice new tool for integrating Google maps into Xcelsius - however it costs about $1K and it requires the expensive Google maps premier license.   Anyone have ideas on other ways to use Google maps or Virtual Earth for showing data within Xcelsius?   Thanks very much.   User reaction is poor to my built in continent map with little hand placed icons over the countries in which we do business - can't blame them after using Google or Microsoft mapping products.

    Are they looking for interactivity, or simply a better looking picture?
    One suggestion I could offer is to use is XComponents. They are really a great free alternative:
    http://xcomponents.blogspot.com/2008/07/xcelsius-www.html
    I hope that helps!
    Thanks,
    Brian

  • Mirror Transaction in Product type

    Hi All,
    We have been configuring Mirror Transactions for product type 62B.
    for transaction 304. (Fix to Fix).
    However we get no error message and no mirror deals are created even when the deal is created or settled.
    Maintain Relevant Product Types and Transaction Types
    1000
    62B
    304
    01
    20/30
    2000
    Map Product Types and Transaction Types
    2000
    62B
    304
    TEST
    + Incoming 01 Mirror Image
    1000
    62B
    304
    TEST
    - Outgoing
    01 Mirror Image
    Process Incoming Data
    2000
    62B
    304
    01
    20/30
    1000
    01
    01 Mirror Image
    Company codes are correctly mapped to Partners.
    Still we do not get the Mirror deal created.
    We checked the Class: CL_IM_FTR_TR_MIRROR_DEALS in which FTR_MIR_BAPI_CREATE is used to create deals.
    In the class I dont find any condition for product category 620 - SWAP.
    Your guidance is appreciated.

    Hi Subhrajit,
    mirror deals functionality is available for the following financial instruments: fixed-term deposit, deposit at notice, cash flow transaction, interest rate instrument, foreign exchange, and foreign exchange swap -> see a Section 'Features' @ Mirror Transactions - Product Types in the Transaction Manager - SAP Library, so I'm afraid 62B is simply is not within the scope of Mirroring functionality.
    hope this will help you.
    Kind regards,
    Renatas

Maybe you are looking for