Mapping r/3 system EP60 sp4

Hello All,
I am little confused after used up to EP 50. I am trying to set up R/3 system mapping after EP 60 PDK implementation.I am trying to follow the below steps in sequence.
1. I go to System Admin -> System Configuration -> System landscape
2. In the portal content, I created my own folder and created a system with property as SAP_R3_Dedicated
3. Created a system alias
4. Went to Object -> Edit. selected the User Management and set the attributes User type -> Admin and login method -> UIDPW
5. At this time I am not sure which Property to select to set the values for Host & Protocol.
4. Now I go to User administration and mapped my user id in PDK Vs the SAP User id in the mapping.
5. Now I try to create an Iview for sap r/3 tcode and as expected it failed with message 'Please maintain the host and protocol' which i missed as part of the step 5.
Which property should i select to maintain the properties mentioned in step 5 ?
Regards
Swami Bala

hi,
to connect to a sap backend, you should have filed the following fields:
Property Category: Connector
- application host (with saprouter-string, if necessary): /H/mysaprouter.company.com/H/saphost.mycompany.com
- Gateway Host / Service (if necessary)
- Logical System Name
- SAP Client
- SAP System ID
- SAP System Number
- Server Port
Property Category: Web Application Server (WAS)
- WAS Description
- WAS Host Name
- WAS Protocol
Property Category: Internet Trabsaction Server (ITS)
- ITS Description
- ITS Host Name
- ITS Path
- ITS Protocol
kr, achim

Similar Messages

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

Error in codepage mapping for source system

Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep Sharma

Hi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa.

Error in codepage mapping for source system. Error

Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?

Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards.

Error in codepage mapping for source system. Error text:

guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AM

Hi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit

Use BDLS in BI for re-mapping of source system

Hello,
Is it possible to use tr code BDLS in BI in order to automatically change source system assignment in source system related BI objects (such as info sources, info packages..)?
We have created a new ECC QA client and would like to load data from that to BI (the same BI system as before) and wish to avoid the manual work of manually re-mapping all source system related objects.
In the thread below the conclusion was that it's possible to use BDLS, but when executing it in test mode and looking at the affected tables, only the parter profiles and EDI-related tables seems to be modified with a new LSN (logical system name). However, I could not find a change in tables containing f.ex. info sources etc.
Fresh source system clients in production BW system
Is there anyway of doing this without manually re-mapping the BI objects?
Thanks,
F C
Message was edited by:
F C

Thanks!
When running a LSN conversion in BI from source OLTP to target OLTP in test mode and then checking some BI-object tables, I see that the logical system name is changed, so it's seems to me as if the infosources are changed.. (or?)
However, perhaps a transport in "system copy" mode is preferrable (?) In step 2, do you mean that I should first collect a system copy in a transport request and then collect "everything before" in the same transport request?
Any comments on BDLS, Patrick?
Regards,
F C
Message was edited by:
F C

Source system mapping between BW systems

Hi All
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete for the 3.5 objects , we also checked the 7.0 button in the conversion and it still have missing objects

Hi... i dont understand your isse you have one source of transport and in the destination if points to two systems and this works for you....and your problem is in 3.5 objects? its a version problem?
Regards

MSS - Appraisal - No user mapping defined for system SAP_ECC_HumanResources

Hi Experts,
We are using MSS for appraisal. When we click on Maintain Performance Documents link on MSS, we gets Status Overview for employees. After that when we click on In Preparation point, it gives following error.
No user mapping defined for system SAP_ECC_HumanResources
It asks for User name and Password. When we enter user name and password, it gives following message.
Session Management will not work!
Please check the DMS log file for details.
You can turn off this alert inside"Support Destk"->'SAP Application' and after that screen gets error - Internet Explorer cannot display the webpage
Would appreciate kind guidance on this. We are on EP 7.0 and ECC 6.0. We are using single-sign on.
Thanks in advance.
Aashish

Hi Experts,
We are using MSS for appraisal. When we click on Maintain Performance Documents link on MSS, we gets Status Overview for employees. After that when we click on In Preparation point, it gives following error.
Session Management will not work!
Please check the DMS log file for details.
You can turn off this alert inside"Support Destk"->'SAP Application' and after that screen gets error - Internet Explorer cannot display the webpage
Would appreciate kind guidance on this. We are on EP 7.0 and ECC 6.0. We are using single-sign on.
Thanks in advance.
Aashish
Edited by: Aashish Brahmbhatt on Sep 8, 2008 8:51 PM

Mapping of Quality System (Source System) after the Transport

Hi,
We have two quality source systems like 300,400 in sync with the development ,to extract the data . I am transporting Transfer rule mapping from the development .After the transport to Quality , the changes are reflected in 300 . But I want to change it from 300 to 400 i.e.Transfer rule mapping should be reflected in 400. What is the transaction code used to change this mapping in BW System?
Thanks for your time.
Thanks & Regards,
Raja

Raja,
When you transport - you have a transport mapping in your dev system that tells BI which system connects to which system in the QA system for instance
FLAT_FILE in DEV could be Z_FLATFILE in QA - accordingly the datasources are mapped. Also the transfer rules are source system specific which means that you change the source system - the transfer rules will have to be recreated.
Instead what I am asking you is to maintain the mappings for client 400 in DEV and then maintain the mappings as 400 - 400 in the qa system and then transport the same. If your dev systems are linked to QA300 and your mapping says QA400 the same will hold good.. however if you have QA300 in dev to be sent to QA as QA300 and then change the source system .. it will not work since this will be seen as a source system change and you cannot change the same. You could try BDLS and try changing the logical client name ( I am not sure if it is BDLS ) or change the RFC connection parameters in SM59 but am not sure if it would work....

Mapping of source systems

Dear
Sirs,
The mapping of source system has to be done for myself sourc system also or its enought if we do for sap r/3 source systems is
enought,,,Need your help..
Thanks
Regards
Radha

Hi
If you want to transport objects from quality to production.
You have to map the current source system (i.e here quality SS) to production SS.
It will be available in RSA1 ---> Tools -
> Conversion of logical system names after transport
Regards
sateesh
Edited by: sateesh kumar on May 14, 2010 2:25 PM

Mapping of Source System Names

Hello,
Has some body done the mapping of Source System for "Transport" to go through which is done using the following steps:
RSA1 --> Tools --> Mapping of Source System Names(Conversion of source system name after transport)
You have to enter the source system name and target source source.
So if I have following Landscape
1) R3DEV -> R3QA --> R3QPROD --> R3Prod
2) BWDEV -> BWQA --> BWQPROD --> BWPROD.
What should be entries in the table
OrSource TargSrceSy
1) R3DEV R3QA
2) R3DEV R3QPROD
3) R3DEV R3Prod
4) BWDDEV BWQA
Thanks,
-Hari
5) BWDDEV BWQPROD
6) BWDDEV BWPROD
or
1) R3DEV R3QA
2) R3QA R3QPROD
3) R3QPROD R3Prod
4) BWDDEV BWQA
5) BWQA BWQPROD
6) BWQPROD BWPROD

Thanks A.H.P. So just a click clarification. My question is
So BWQPROD will contian
OrSource TargSrceSy
 R3DEV R3QPROD
OR
 R3QA R3QPROD.
Because my basis the transport path is as shown below.
 R3DEV --> R3QA
 R3DEV --> R3QRPOD
 R3DEV --> R3PROD
So dev will transport to QA,QPROD,PROD
Thanks,
-Hari

When i was partitioning my hard drive i ran out of power (so it closed in the middle of the process). now when i try to partition it says Couldn't modify partition map because file system verification failed.

When i was partitioning my hard drive i ran out of power (so it closed in the middle of the process). now when i try to partition it says Couldn’t modify partition map because file system verification failed.

You'll have to select the entire external hard drive by the hardware name itself and then apply a new partition table to it under the Partition tab of Disk Utility. Erase and format the drive.
GUID for OS X.

Module.map document in System/Library/Frameworks

I have an iMac operating on Mavericks 10.9.2. I just found a Module.map in my System/Library/Frameworks folder which says to
exclude Kernel
exclude System
exclude Tk
exclude Ruby.
I could not find any information about this. Should I be concerned? Is it supposed to be there?

I suggest inquiring in a Qt forum.

C7 ovi maps - check in - system error

I didn't have any problem with ovi maps but after I updated my C7 from pr 1.1 to 1.2 check in function doesn't work and it says "SYSTEM ERROR". Any solution ? Please help... I am about to blow
Solved!
Go to Solution.

pj98 wrote:
Try updating to the latest Ovi Maps 3.06 11wk10 version, it should now be available via SW Update menu, Ovi Suite or from Ovi Store.
For the benefit of Mac users or anyone else, application also available for direct download from here:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-c7-00...
Happy to have helped forum with a Support Ratio = 42.5

Mapping r/3 system EP60 sp4

Similar Messages

Maybe you are looking for