Mapping source system in different Systems.

Hi experts,
I want to define different source systems for different development, quality and Production systems.
I have defined it on "TOOLS/ Conversion of logical system names"
I want to have directly the new assignements when transporting.
I have the source systems defined in each system.
Do I nedd to define it anywhere else?
Thanks!
Artur.

Hi Artur,
This can be done in transaction RSLGMP in destination system.
So thats the same thing, you have done as well. so nothing else required, provide we have the RFC connections set right.
Naveen.A

Similar Messages

Can i integrate the test scripts existing in different systems?

Hi Experts,
I have a script in ERP and another script in SCM system(two different systems). Now in my master script, i want to integrate both and run as a single script. Can i do that?
Many Thanks..
Regards,
Naresh

Hi Christoph, ALL,
I was not clear with your explanation. let me tell you what i did and what i intend to do.
1) I have created the sales order creation script in ERP system. Script name: zsalesXXXX.
2) I have created the second script to run the planning profile in other system ( SCM system). script name: zplanningXXXX.
Then i hv created the SDC with RFC destination and target system name as ERP system name for this script.
3) I want to run both the systems in ERP system using a single script. so, I have created a master script in ERP system. Script name: zintegrateXXXX to run both the scripts i.e zsalesXXXX (created in ERP) and zplanningXXXX (created in SCM).
4) In the master script, zintegrateXXXX I could include the first script zsalesXXXX using the REF command.
5) The problem arises here when i'm trying to add/include the other script zplanningXXXX(created in SCM system) using REF command. It throws an error 'Test script 'XXXXXX' cannot be found in the local system.'
I did all the recordings using TCD Record.
Please advice me, Is there any other command which i should have used instead REF?
or Anything went wrong in the steps i followed?
Kindly advice. It would be very helpful for me.
Regards,
Naresh

N:1 replication from multiple ERP source systems on different EHP levels

Hello,
The situation is that the customer has multiple ERP systems on different EHP levels. Therefore, in newer EHP systems, some tables will have different structure (additional columns). The intention is to setup N:1 replication into one target DB schema
Would this be possible to support/setup in SLT ? How would the different table structure be handled?
Thanks and best regards,
Cosmin

Hi Cosmin,
I think this can be achieved. First of all you have to investigate which structures are available for the different releases. At the and the target structure has to consist of all available fields with the same name.
Before oyu start with the replication you have to specify the same target structure for all configuration.
What SLT is doing during the mapping from the source structure to the target structure is a "move-corresponding" command. So it is important that the names of the fields are the same. At the end you will have sometimes fields filled, sometimes not (depending if this field is in the source filled).
Let me know if you need further input.
Best,
Tobias

How to design EDW for source systems from different Time-Zones

How to design EDW for source systems from different Time-Zones?
Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
Abhijit

How to split a single file and then route it to different systems

Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.

Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth.

Report which reads data from two different systems

Hi experts!
By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
Kind regards.

Good afternoon Raul,
It should be possible to create a multiprovider on the two different cubes from the two sources
systems and report on this.
Best Regards,
Des

Replication of a data source from multiple logical systems

Hi experts,
In our ERP wie run many different clients with correspondong logical systems. When I'm changing a data source in ERP, then I have to replicate this datasource for each single logical system.
My question :
Is there a way to replicate a data source for all logical systems belonging to an infos source at once ?
We are on BW 3.5 SP19.
Thanks in advance
Joe

just another attempt

Running queries coming from different systems

Hello All
I have a scenario,
We are using BI version 7.0,
The requirement is to run queries in BEX analyzer coming from 2 different SaPBW systems.
For example :
We have two BW systems A and B,
In the First tab we have query running based on the BW system A and in the second tab query running on Bw system B.
When we try to run the second query in the second tab the first query vanishes,
Can anybody help me, is it possible to run the 2 different queries from different systems???
Regards,
Ravi

Hi Ravi,
Even using RRI you will not be able to combine reports from different systems in single workbook. RRI is generally used for Summery to detail level reporting. In such scenarios from first report you click on particular characteristic and other details related to this characteristics are shown in different report coming from any other source.
If you want this kind of report to run then either you will have to build a Virtual provider in one of the BI system making source as another system and then create a query and use it in same workbook.
In this way your report might take some time to execute but you don't need to load all your data from one system to other.
Regards,
Durgesh.

How to map IntegrationProcress to ALE Logical System Name

Hy,
i'm triying to send an Idoc from my IntegrationProcess MY_IP
to out Backend SAP System XX1.
Konfiguration has been done with an valid ReceiverAgreement.
But neverless i got the following error:
"Sender Service MY_IP cannot be mapped to an ALE Logical System"
1. Where do i specify this Mapping? (I tried Header Mapping ReceiverAgreement
without success)
2. In my message mapping EDI_DC40 has mandatory fields like RCVPRN.
But hardcoding the Receiver here cannot be the solution. Do the value
i map there do have any effect at all?
Thanks in advance.
Gunnar

Hello Nilesh,
you're right - now it works. I just defined any LS and SID. No the IDoc runs into the system, but cannot be processed since the originator is unknown. But this can be solved now with SALE and we20.
To be honest: there are so many blogs concernig this case. But i didn't find any which explains why the behavior is different when you send an IDoc from an Integration Process and what happens behind the scene. In the documentation
i didn't find anything at all...
Thank you very much.
Gunnar

Business Package, Alias and different systems....

Hello everybody,
I have got some questions concerning the mentioned topics.
I have a business package (Internal Sales Repr.) and it is already installed.
1. On each iView in the business package there is set an ID for a SAP System, for example a BW. Is this the SID or is it the ALIAS I defined for a system to access the BW?
2. There is a machine with enterprise portal, R/3 and BW running under the same SID. They all have different clients. (thank god it is a test system and not productive)
Do I need to create different systems in the portal to access to BW and R/3 because of the different clients?
Is it generally possible to implement SSO form the portal to the Backend, if they have the same SID?
3. The ID from 1. is not set as a deltalink. Is it defined by default or it is set when I install the business package?
Wow, a lot of stuff. But I hope you can help me
thanks
christian

Hi Christian,
Two different system has to be created in portal. In the system object you have to set the connector properties, user admin, user mapping and the WAS for BW and ITS for R/3 properties.
You have to create the system alias and the test the connection.
For import and export of the certificates. you have to use Strustsso2 transaction.
Regards
Arun

Creating multiple source systems one logical system

Hi,
The requirement is to create two source systems using same logical name and different RFC connections to ECC?
We wanted to do some regular activities using one source system and some drill down activities using different source system.
I am getting error when I try to create second source system "source system already exist"
Please advice.
Thanks.

Hi,
I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
Hope this helps.....
Regards,
Suman

Provisioning different User Type to different systems

Dear Experts,
Is there a way by which we can provision different user types to defferent systems via CUP?
We have the following requirement:
1. User created in ECC should be dialog user
2. User created in BW should be service user
3. User always selects ECC and BW at the same time in one request
Thanks for your attention.

Hi Tang,
You can try this with creating 2 different custom field or 2 unused field in end user form like employee type and some other field. Then you need to define provisioning field mapping for both of these system differently.
Like you created 2 fields EEC_USER_TYPE & BW_User_TYPE then while making provisioning field mapping you need to create 2 different group. EEC_Mapping and BW MApping and map the respective custom field with Provisioning field mapping group.
I hope this will help you.
Regards.
Hemant

Source System of Dev System is not active QAS System.

Hi
I am trying to transport my SAP-BI flow from Dev System to the Quality System.
but I am getting an error "Source System of Dev system is not active in QualIty System.
I have checked RFC Connection ,everything is fine.Please help.
Thanks and Regards,
Asim

Have you checked the mapping of the source systems in the conversion table (RSLOGSYSMAP)?
Usually, DEV source systems are not available in QA, so when you transport to DEV, the source system assignment has to be changed to a QA source system.
For example, source system CRDCLNT100 (CRM DEV system) is connected to BWDCLNT100 (BW Dev)
and CRTCLNT100 is connect to BWTCLNT100.
Objects in BWD which are assigned to CRD, have to be re-assigned to the CRT source system when transporting them from BWD to BWT.
The mapping table is maintained in RSA1, menu option tools > 'mapping of the source system names'.
Jan.

Single BPEL process to server different system?

Hi All,
I have one source system and have three target system.
Source System - S1 (Oracle System)
Target System - T1, T2, T3 (oracle System)
I need to pass supplier data from S1 to T1, T2, T3.
I need to create only one single BPEL process to acheive this.
Current design is to transfer data from S1 to T1, T2, T3 using database adapter (Having three db adpater and passing same payload to three).
I am not happy with the design to have three adpater (say if we have 10 different system then we may need 10 adapter). Can anybody please suggest any other way around using BPEL or ESB.
Thanks and Regards,
Sreejit

Example Assignment
<assign name="Init_InsertStagingData">
<copy>
<from expression="/eis/DB/TEST_UK"/>
<to variable="endpointReference"
query="/ns3:EndpointReference/ns3:Address"/>
</copy>
<copy>
<from variable="endpointReference"/>
<to partnerLink="InsertStagingData"/>
</copy>
</assign>
Endpoint Reference Schema
<element name="EndpointReference">
<complexType>
<sequence>
<element name="Address" type="string" minOccurs="0" nillable="true" />
</sequence>
</complexType>
</element>
--Prasanna

Want to compare same object in different systems

hi all,
i want to compare same object in different systems
example:
same transfer rule in BID to be compared with the one in BIT/BIP
in these kind of cases, pls help me on how to do the comparison.
as i have to do some enhancement in BID and release that changes to BIT/P. but while manually checking i might also miss out any important changes which might create issues.
pls suggest.

Could you please use the below table for comparision.
Cubes      RSDCUBE
DSO's (to identify DSOu2019s based on time stamp field)     RSODSO
Multiproviders     RSDCUBEMULTI
Infosets     RSQISET
Trasnformations      RSTRAN
DTP's     RSBKDTP, RSBKDTPSTAT
Trasnfer strcuture     RSTS
Infopackages     RSLDPIO
Update Rules     RSUPDINFO
Aggregates     RSDAGGDIR/RSDAGGDIR
Process Chians     RSPCCHAIN
OHD's
data sources status      ROOSOURCE,RSDS
Regards,
Saveen Kumar

Mapping source system in different Systems.

Similar Messages

Maybe you are looking for