Mapping table

I'm working on a XI interface scenario and it reads like following
Customers (from a File system) send a PO request (containing a Customer PO num) to XI. And, XI maps file data to a PO IDOC PORDCR1 and sends it to R/3 system. In R/3, PO is created. After the goods receipt, customer sends GR message to XI. XI calls BAPI_GOODSMVT_CREATE and created GR. When the GR is created, it has to be created against the earlier PO. For this reason, customer sends the GR message (as a file) with customer PO number. In R/3, the GR needs to be created with reference to R/3 PO number, but not with reference to the customer PO num.
Now the question is, where should the mapping between customer PO and R/3 PO be maintained? In R/3 or XI?
If it is in R/3, what is the need for XI usage? How do we make best use of XI in this scenario?
I highly appreciate a quick response or any kinda assistance.
Thanks in advance
Praveen

Hi Rob,
Thanks for ur response.
> I would say if you want to keep your SAP R/3
> interface implementation "clean", then create and
> maintain this mapping in XI.
When you say 'maitaining the mapping in XI', how do you suggest it to be maintained? Once the PO IDOC is sent to R/3 and say a Response IDOC/proxy message is sent back to XI. Where do I store the customer PO and SAP PO number? In a file/table on XI server? If not where? Please clarify.
> By doing it this way you will access the R/3 PO nr.
> via an RFC/BAPI call from XI to the R/3 system.
Do you mean to say in XI, when I receive (from file system) the GR with customer PO number, I query the R/3 system and get the corresponding R/3 PO number and fill it in the BAPI for GR and call BAPI_GOODSMVT_CREATE? Please clarify.
Thanks
Praveen

Similar Messages

Import conversion data table from SAP R/3 into value mapping table in XI

Hi:
    Somebody knows how to import a table with conversion data that are in SAP R/3 and to take it to a value mapping table in XI?
    The purpose is to use a mapping table that can change in the future. Must I use a ABAP programming that retrieve data and build the value mapping table?
    If so, how I specify in the ABAP programming the group id, the scheme, the agency and the corresponding value?
    Please, help me.
    Regards!!!

Hi David,
please refer to this section in the help: http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
There is an interface for mass replication of mapping data. The steps you need to carry out to use this are:
+Activities
To implement a value-mapping replication scenario, proceed as follows:
       1.      Register the Java (inbound) proxies.
To do so, call the following URLs in the following order in your Internet browser:
¡        http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication (for the asynchronous replication scenario)
¡ http://:/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous (for the synchronous replication scenario)
You only need to perform this step once (for each installation).
       2.      Application programming
The ABAP program must perform the following tasks:
¡        Read the value mapping data from the external table
¡        Call the outbound proxy used to transfer the data to a message, which is then sent to the Integration Server
       3.      Configuration of the replication scenario in the Integration Directory
This involves creating all the configuration objects you need to execute the scenario successfully. One special aspect of the value-mapping replication scenario is that the receiver is predefined (it must be on the Integration Server). The sender, however, is not predefined in the replication scenario and can be defined to meet your individual requirements.
For example, you can use the shipped ABAP proxies.
In the case of the receiver communication channel, choose the adapter type XI. Ensure that you configure a channel for the Java proxy receiver in this case.
Enter the path prefix /MessagingSystem/receive/JPR/XI for this purpose.
+
Regards
Christine

MDM API to read the Record Key Mapping table

Hi,
Does anybody know what class/method I can use to read the Record Key Mapping table?
For the Business Partner table the Key Mapping table has this columns:
Default / MDM Partner ID / Remote System / Key
I have everything but the Key. How can I read it?
Thanks in advance,
Diego.

GetKey Mapping is one of the available Web Services as of SP4.
Else you could use the Java API to get the Key Mapping.
CatalogData class has the following method
GetKeyMapping
public java.lang.String[][] GetKeyMapping(java.lang.String agency,
 java.lang.String table,
 int[] recordIDs,
 boolean isDefaultKeyOnly)
 throws StringExceptionRetrieves the key mapping for each record.
Parameters:
agency - the agency name.
table - the table name.
recordIDs - the list of records.
isDefaultKeyOnly - True to retrieve only the default value, False to all key values.
Returns: the key values for each record.

Partitioned IOT of Object Type - mapping table not allowed for bitmap index

Hi,
looks like a feature available for standard Partitioned IOTs is not supported for object based tables, namely the MAPPING TABLE construct to support secondary local bitmap indexes.
Can you confirm behaviour is as expected/documented?
If so, is a fix/enhancement to support mapping table for object-based Partitioned IOTs in the pipeline?
Results for partition-wise load using pipelined table function are very good, look-ups across tens of millions of rows are excellent.
Environment = Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
OS = Oracle Enterprise Linux Server release 5.2 (Carthage) 2.6.18 92.el5 (32-bit)
Here's the potted test-case...
1) First the non object based Partitioned IOT - data is range-partitioned across the alphabet
CREATE TABLE IOT_Table (
textData VARCHAR2(10),
numberData NUMBER(10,0),
CONSTRAINT IOT_Table_PK PRIMARY KEY(textData))
ORGANIZATION INDEX MAPPING TABLE PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
SQL> table IOT_TABLE created.
2) Create the local secondary bitmap index utilising the underlying mapping table
CREATE BITMAP INDEX IOT_Table_BMI1 ON IOT_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
SQL> bitmap index IOT_TABLE_BMI1 created.
3) Quick test to confirm all ok
SQL> INSERT INTO IOT_Table VALUES ('ABC123',100);
SQL> 1 rows inserted.
SQL> SELECT * FROM IOT_Table;
TEXTDATA NUMBERDATA
ABC123     100
4) Now create a minimal object type to use as the template for object table
CREATE TYPE IOT_type AS OBJECT
textData VARCHAR2(10 CHAR),
numberData NUMBER(10,0)
) FINAL
SQL> TYPE IOT_type compiled
5) Attempt to create an object-based range partitioned IOT, including MAPPING TABLE clause as per step (1)
CREATE TABLE IOTObj_Table OF IOT_type (textData PRIMARY KEY)
OBJECT IDENTIFIER IS PRIMARY KEY ORGANIZATION INDEX
MAPPING TABLE -- we'd like to use this feature to enable use of Bitmap Indexes...
PCTFREE 0 TABLESPACE Firewire
PARTITION BY RANGE (textData)
(PARTITION Text_Part_A VALUES LESS THAN ('B') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_B VALUES LESS THAN ('C') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_C VALUES LESS THAN ('D') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_D VALUES LESS THAN ('E') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_E VALUES LESS THAN ('F') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_F VALUES LESS THAN ('G') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_G VALUES LESS THAN ('H') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_H VALUES LESS THAN ('I') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_I VALUES LESS THAN ('J') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_J VALUES LESS THAN ('K') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_K VALUES LESS THAN ('L') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_L VALUES LESS THAN ('M') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_M VALUES LESS THAN ('N') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_N VALUES LESS THAN ('O') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_O VALUES LESS THAN ('P') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_P VALUES LESS THAN ('Q') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Q VALUES LESS THAN ('R') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_R VALUES LESS THAN ('S') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_S VALUES LESS THAN ('T') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_T VALUES LESS THAN ('U') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_U VALUES LESS THAN ('V') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_V VALUES LESS THAN ('W') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_W VALUES LESS THAN ('X') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_X VALUES LESS THAN ('Y') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Y VALUES LESS THAN ('Z') PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0),
PARTITION Text_Part_Z VALUES LESS THAN (MAXVALUE) PCTFREE 0 TABLESPACE Firewire Storage (Initial 10M Next 1M PCTIncrease 0))
NOLOGGING PARALLEL -- FLASHBACK ARCHIVE IOT_Flashback_Data
This errors out with the following...
SQL Error: ORA-25182: feature not currently available for index-organized tables
25182. 00000 - "feature not currently available for index-organized tables"
*Cause:    An attempt was made to use one or more of the following feature(s) not
currently supported for index-organized tables:
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
6) Re-running the create table statement in step 5 without the MAPPING TABLE clause works fine. Not surprisingly an attempt to create a secondary local bitmap index on this table fails as there's no mapping table, like so...
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
CREATE TABLE with LOB/BFILE/VARRAY columns,
partitioning/PARALLEL/CREATE TABLE AS SELECT options,
ALTER TABLE with ADD/MODIFY column options, CREATE INDEX
*Action:   Do not use the disallowed feature(s) in this release.
CREATE BITMAP INDEX IOTObj_Table_BMI1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL
Error at Command Line:99 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
7) Creating a secondary local b-tree index is fine, like so...
SQL> CREATE INDEX IOTObj_Table_I1 ON IOTObj_Table (numberData)
LOCAL STORAGE (INITIAL 1M PCTINCREASE 0 NEXT 512K) NOLOGGING PARALLEL;
index IOTOBJ_TABLE_I1 created.
8) A quick test to ensure object table ok...
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> 1 rows inserted.
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DEF456     500

Thanks Dan,
the intention is to range partition based on the initial character, so A* -> Text_Part_A, B* -> Text_Part_B, and so on.
Here's an example, using an empty IOTObj_Table as created previously.
1) Set up & confirm some test data (two 'D's, one 'N', and two 'Z's)
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DEF456',500));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('DDD111',510));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('N3000',515));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('ZZ1212',520));
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
SQL> COMMIT;
SQL> SELECT * FROM IOTObj_Table;
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
N3000     515
Z111X     530
ZZ1212     520
2) Just to prove our IOT is enforcing the Primary Key based on the TextData attribute, try to insert a duplicate
SQL> INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530));
Error starting at line 141 in command:
INSERT INTO IOTObj_Table VALUES (IOT_Type('Z111X',530))
Error report:
SQL Error: ORA-00001: unique constraint (OCDataSystems.SYS_IOT_TOP_84235) violated
00001. 00000 - "unique constraint (%s.%s) violated"
*Cause:    An UPDATE or INSERT statement attempted to insert a duplicate key.
For Trusted Oracle configured in DBMS MAC mode, you may see
this message if a duplicate entry exists at a different level.
*Action:   Either remove the unique restriction or do not insert the key.
3) Now confirm that our data has been slotted into the range-based partition we expect using the PARTITION clause of SELECT...
- The two 'D's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_D);
TEXTDATA NUMBERDATA
DDD111     510
DEF456     500
- The single 'N'...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_N);
TEXTDATA NUMBERDATA
N3000     515
- The two 'Z's...
SQL> SELECT * FROM IOTObj_Table PARTITION (Text_Part_Z);
TEXTDATA NUMBERDATA
Z111X     530
ZZ1212     520
4) And to wrap up confirm an empty partition
SELECT * FROM IOTObj_Table PARTITION (Text_Part_W);

Message mapping: table lookup

The requirement:
Source message contains some keys and values, and target message has different keys. Values are simply mapped. no problem. but the mapping between source message keys and target message keys is a bit complicated so it is controlled in a seperate table. End users do maintainance jobs on the mapping table on a daily base.
I checked some threads in this forum and I now understand that this kind of table lookup can be done using the combination of JCo, ABAP programs and ABAP tables, but what is the common way in dealing with such kind of requirement?

You can use value mapping if you are not looking at picking up values from application system.It is just like SM30 transcation.You can get the info under SAP XI->Design and Configuration->Configuration->Value Mapping.
If you are in SP13 you can use lookup API SAP XI->Design and Configuration->Design->Mapping look ups.

Lookup value mapping table through message mapping.

Hello All,
I am working on a graphical mapping (message mapping). When trying to map the source message to the target message, I need to find out it a particular key exists in the value mapping table. Depending on the result, I need to map different source fields to the target field.
Is there any inbuilt function which will allow me to do a lookup on a value mapping table, or is it possible to lookup a value mapping table from a UDF?
Please help!
Warm Regards,
Keerti

Hi,
Please see the below links for Value mapping ..
Value mapping /people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
Value mapping in XSLT /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
Value Mapping replication - /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Also see
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards
Pradeep N

How create a Value Mapping Table in XI 3.0?

Hi:
    I wish make a single sample scenario where receiving data must be converted according to convertion table:
01 -
       Legacy A | Legacy B -
M
             Male:              01     |    M
             Female:            02     |    F
And I don´t know how build it. Must I create anything in Integration Repository? (any special message mapping or function?).
Anyone know about weblog where explain step by step for "value mapping group" and "value mapping tables" creation?
Help me please.
Regards!!
David.

Hi David,
You can create value mapping tables in Integration Directory.
First you have to create Value mapping group using menu Object>new>Value mapping Group
to Display value mapping you have to use Tools--> Value mapping.
Also refer to following link on help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
In IR Graphical mapping tool, use the standard function Conversions-->Value mapping.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju
Message was edited by: Sam Raju

How to insert bulk values in value mapping table at a time.

Hi all,
I hv one issue in value mapping i.e,
I hv some bulk data in MS- Excel, i am unable to copy all the date from ecel to value mapping table.
SO, How can i insert bulk values in my value mapping table at a time.
plz, help me in this asap.
Regards,
Mahesh

hai mahesh check the below links,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f42d490-0201-0010-6d98-b18a00b57551
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/83086a1d-0e01-0010-2797-f1ce7f8f562d
note:reward points if solution found helpfull.....
regards
chandrakanth.k

How can i access value mapping table using xslt mapping

Hi All,
I have maintained value mapping table in integration directory.I want to access the data from the value mapping table in XSLT mapping using java function.PLease suggest me to do this.
Thanks
Pullarao.

Value mapping that thread should solve your query !!!

Accessing ID Value Mapping table in XSLT

Hi Experts,
In the XSLT mapping,I would like to access my value mapping table which i defined in ID .The purpose of ID value mapping here is, the table entries will be changing in future and i don want to use fix values, XML table which is defined in runtime.
I have gone through the blog
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
which explians design value mapping table in XSLT.
Is there any way to access Configuration Value Mapping table in XSLT? If yes, can you explain how should i achieve it ?

Hi,
you can use the xivmService to call ID val map tables.
Use tha java function executeMapping, Its a standard SAP api.
Declare the Service in XSLT at start
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:vm="com.sap.aii.mapping.value.api.XIVMService" version="1.0">
Call the val mapping table using below template wherever required.
<xsl:template name="ValueMapping">
<xsl:param name="SenderParam"/>
<xsl:value-of select="vm:executeMapping( 'SenderType', 'SenderTypeSchema', $SenderParam, 'receiverType', ReceiverTypeSchema')"/>
</xsl:template>
Call template like :
<xsl:call-template name="ValueMapping">
<xsl:with-param name="SenderParam">
try it and let me know if you have any doubt.
regards
Inder
Edited by: Kulwinder Grewal on Aug 12, 2009 11:36 PM

How to put identical target value in value mapping table

Hi all ,
         I am implementing a value mapping function .Problem is occuring for repetated target value.for ex: if key is GL001 GL002 GL003 and destination value is 4 5 4 then its creating problem for identical values i.e for both GL001 & GLOO3 its not accepting 4 .Same manner for many diffrent glncode i have identical values.not understanding how to deal with these identical values please guide me as its very urgent.
Regards,
Saurabh

Hi saurabh,
you can try this out....
First you create a value mapping table in ID like:
AWSYS   GLNCODE
GLOO1     10
GLOO2     20
(without GLOO3).
now in your message mapping do the following mapping:
                          Contant[GLOO1]
                               |
                               |(then)
AWSYS-------------> equals---->if----------------->Value Mapping---->GLNCODE
                    |          |(else)
                    |          |
Constant[GLOO3]-----|        AWSYS
**Reward points if helpful...
--Sankar Choudhury

Issue with Value Mapping table

Hi
I want to upload a external value mapping table to XI.
I do not want to code for it on the SAP R/3 side. and there might be more than 2000 value mappings. so can we upload a external mapping table.
Is it possible?? if yes, then how??.
Thanks
Nikhil

XI 3.0
Hi,
first of all one helpful information:
You can see all data of the value mapping tables using the
runtime workbench: Go to the IntegrationBuilder->
Integration Monitoring->Cache Monitoring, select 'Search
for Value-Mapping' and choose your context.
The value mapping tables are located in the J2EE part of
XI. You have to send your value mapping data to an Java proxy
located in the J2EE part. First, the inbound proxies
(synchronous and asynchronous) need to be activated.
There are two urls, named in the docu, you have to call
from a web browser:
(asynchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplicationSynchronous&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplicationSynchronous&method=valueMappingReplicationSynchronous
(synchronous replication scenario)
http://<Server>:<Port>/ProxyServer/register?ns=http://sap.com/xi/XI/System&interface=ValueMappingReplication&bean=localejbs/sap.com/com.sap.xi.services/ValueMappingApplication&method=valueMappingReplication
You only need to perform this step once (for each
installation).
If you already have a sender for the mapping data, the
next step is to configure the scenario in the directory
Create a communication channel with
Adapter type: XI
Transport protocol: HTTP 1.0
Message-Protocol: XI 3.0
Adapter-Engine: Integration Server
and host name and http port of the XI J2EE Engine and Path Prefix: /MessagingSystem/receive/JPR/XI
The user XIAPPLUSER has the required permissions.
For an asynchronous communication you can use the
inbound interface ValueMappingReplication from the namespace http://sap.com/xi/XI/System.
In that namespace there are also outbound interfaces you
can use to generate a sender proxy and synchronous
interfaces for the same purpose. Set the created communication channel as the receiver channel.
You may need a mapping and so on depending on your
sender. If you use the provided outbound interfaces there
is no mapping required.
The Data:
You can create your own GUIDs using some function like GUID_CREATE in ABAP. You don't need to declare the context you use. Something like http://mycompany.com/Test should be ok.
A sample in ABAP:
CRM and R3 are the names of the business systems.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
 ls_value_mappings type svmr_value_mapping_replication,
 ls_item type svmr_value_mapping_rep_item,
 lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'CRM'. <- Business System A
ls_item-identifier-value = '2'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
Use the same guid for another value of the same group
ls_item-group_id = '315286378563858425463215845123548'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'FormOfAddress'.
ls_item-identifier-agency = 'R3'. <- Business System B
ls_item-identifier-value = '1'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
 call method lcl_value_mapping->execute_asynchronous
 exporting
 output = ls_value_mappings.
 commit work.
 catch cx_ai_system_fault into lcl_system_fault.
 write: 'Error: ', lcl_system_fault->errortext.
endtry.
See the XI documentation at SAP XI Design and Configuration Time -> Configuration -> Value Mapping -> Value mapping Replication for Mass Data.
Hope that helps.
Regards,
Christian

In the Value Mapping Table n:1 relations is not allowed???

I'm using Value Mapping but if I try to fill the Value Mapping Table with 2 different source values (e.g AA, BB) and the same one as target (e.g. ZZ) the Integration Builder does not allow it.
I receive the message:
"Rappresentation already exists.
BB | ZZ
AA | ZZ
Do you want to delete it from the existing group and assign it to the current group instead?
Any idea?
Sergio
Message was edited by: Sergio Ferrari

Hi Sergio,
I think it does allow you to have n:1 relations. The error you are getting is because the mapping already exists in another group. You can try to display it to see which group the mapping belongs to.
Nevertheless, since it exists, you do not to enter it again. You are able to use it in your mapping program anyway.
Regards,
Hart

Create multiple idoc with multiple receivers based on value mapping table

Hi,
Scenario:
Step1 : sender sends a finance doc iin the form of an idoc. This idoc will have multiple line items based on profit center. Do determine the value of receiving comp code(header field) n receiving system(logical sys name) value mapping table has to be used.
Solution so far: I can put an rfc lookup for fetching receiving comp code from mapping table with i/p paraameter as profit center . And split the incoming idoc based on comp code value by using split by value. Now I need your advise 2 take this further.
Issue 1 : say the incoming idoc has 4 line seg wid 4 diff profit center
Profit center.       Rec comp code.   Recv sys
P1.                       C1.                        R1
P2.                       C2.                        R1
PS.                       C2.                        R1
P3.                       C3.                        R2
Nw using this info, I want 3 diff idocs to be created for each unique comp code.
Idoc 1 : for C1 wid one line item + 1 for reconsilation ( to be generated additionally)
Idoc2 : for C2 wid 2 line items + 1 for reconsilation
Idoc 3: for C3 wid 1 line item + 1 for reconsilation
Idoc 1 and idoc 2 shud be sent to R1.
Idoc 3 shud be sent to R2.
Kindly advise on this

Hi experts,
U all r pretty close, but let me put this more clearly.
Step1: create multiple idocs based on unique comp code - I'm able to do this using rfc lookup n split by value. So I get 3 idocs each for c1, c2 n c3.
Nw as per the values from value mapping table.
Idoc for c1 contains 1 line seg.
Idoc for c2 contains 2 line segs.
N idoc for c3 contains 1 line seg.
steps2 n 3, where I do not have a confirmed solution yet n need ur advise.
Step 2 : for each idoc generated I need 2 create n additional segment, mapping 4 which will be based on the values in the original segments for that idoc.
In d above scenario, idoc for c1 contains 1 line seg, nw I want 2 add one more seg to it. The amount and pisting key values in this segment wud be calculated based on the values of the amount and posting key belonging to the original segment in this idoc.
Similarly for idoc for c2 there are 2 segs, nw I need one more, means 3 in allm
Hence for idoc for c3, 1 orig already present + 1 more. = total 2.
Nw I need ur advise on how 2 generate this additional seg in each idocm
Step 3: when all dese 3 idocs are generated, ( in this case itz 3, in real time it can be n), I need to find their respective receivers using rfc lookup n then based on the receiver send 2 resp recvng systm
Nw how do I do this?
Please explain with examples if possible 4 bettr understanding.
u2020ђąu03B7kўu03C3u03C5 in advance.

Equivalent of a prepared stmt (with mapping table to a java class) ?

Hi,
We can fire raw-sql using SQLCall(). Do we have something similar to make and use prep stmts ?
If we have mapped tables to some java classes, this cud be done with the use of toplink 'Query' classes.
But if I dont have anything mapped and want to use the raw-sql kinda method, is it possible to make and use a prep stmt in toplink ?
Thanks,
Krishna

Hi Donald, You are right...I was actually looking for something to use JDBC code directly for these parts. So is there a way to get a java.sql.Connection out of the TopLink session and then fire prepared statements (JDBC code) using that connection ?
Can we do something like this... (do let me know if this is not the right way to do it at all...or if it is not possible at all)
ConnectionPool oCP = RuntimeServices.getConnectionPools().elementAt(0); // plz ignore that i assumed pools are returned as Vector
java.sql.Connection oCon = oCP.getDatabaseLogin().connect(prop); // is it necessary to give prop (since I got it from existing conn pools that are already setup in the server session)
Thanks,
Krishna

Columns in table OCRD and mapping table

Hey,
I want to recreate the form settings form or the query generator form.
That means I need all columns in this table including the translations.
The background is that I select the column address and property 1 and contact person and my program creates automatically the corresponding select clause.
SELECT Address, Property1, contctprsn
FROM OCRD
For this I need the mapping table:
CntctPrsn = Contact Person
a.s.o
Where ist this saved?
Regards Chris

Hi Janos,
thanks a lot for your fast replies.
I think I still explained it wrong.
I will try it again.
My requirement from my customer is to write a tool which gives out all selected columns. I am using a list box where I can set check boxes. The list box includes for example DocNum, Sales Employee, Owner, Posting Date, Delivery Date and all other columns sometimes more than 60 depending on the table.
The customer selects now Sales Employee, Owner, Delivery Date. Now I create the select query.
SELECT SlpCode, Owner Code, DocDueDate
FROM OINV
If you open now the query generator and load the table ORDR you will get the Name and Description of every column.
I only need the information where this mapping is saved in B1.
What I want to do is to give out all Descriptions of the columns and to create to sql query with all Names, which you can see in the query generator.
This meta data is somewhere saved in SAP but I did not found the table yet.
Sorry for my complicated issue description.
Regards Chris

Mapping table

Similar Messages

Maybe you are looking for