Mapping template

Hi
Has anyone got a mapping template on the idoc SHPMNT05, if so can you please share it with me. Basically i want a document which identifies the SAP fields corresponding to SHPMNT05 idoc segments and fields.
regards
Sam

Hi,
mapping tempates in XI allow you to reuse your mappings but to reuse them you must have 2 structures:
source & target. SHPMNT05 is just one end so what would you like to map ?
if you want SHPMNT05 field names go to TCODE WE60 and there you can find fields + descriptions of this idoc
or go to:
http://ifr.sap.com/catalog/query.asp?namespace=urn:sap-com:ifr:LO:470X200&type=idoc&name=SHPMNT05
Regards,
michal

Similar Messages

Mapping Templates

Hi everybody.
I´ve got a doubt about mapping templates.
I have 4 mappings that are basiclly the same. Ive created a template and I use it in the 4 mappings.
But I find this problems:
There are fields that have differents mappings in the 4 mapping so I´ve gone to the mapping and have modified the mapping for this fields.
But when a mapping for a field that is mapped the same in the 4 mappings changes If I modifiy de mapping template and reimport de template in the 4 mapping then I´d lose the especific mappings in each mapping.
Is this possible to solve anyway?
Regards

If I modifiy de mapping template and reimport de template in the 4 mapping then I´d lose the especific mappings in each mapping.
First step should be import the template and then only you should perform specific mapping. Reimporting will always remove specific mappings. You don't have any choice there.
Regards,
Prateek

Data Mapping Templates for NON-RTA Systems

Hi all,
I'm designing n extractor for my NON-SAP System.
I've been reading the Appendix B: Data Mapping Templates for Non-RTA Systems from Configuration Guide - SAP GRC AC 5.3.
I have a couple of questions regarding the size of two fields in table ACTION PERMISSION OBJECTS TEMPLATE
Is correct the size that the documents says about fields:
ACTION (document says it's 20 but in other tables is 50)
PERMISSION (document says it's 10 but in other tables is 100
ACTVT (document says it's 10but in other tables is 50)
Thank you in advanced.

Hi Luis,
Yeah i will follow the recomendations but i'm updating some files to RAR and i've seen another kind of inconsistency such as in the table User File Template. Recomendation says that both FNAME field and LNAME field are 50 size each one but in my case i can update a FNAME 51 size and a LNAME 49, i mean between FNAME and LNAME it's 100 size.
Cheers.

How to remove a Mapping Template from a mapping

Hi,
I used a mapping template to map some of my fields and since I applied it I get some strange behavior in the editor.
I try to use the "Display Queue" option on a simple one-to-one mapping and I get a blank message from the editor.
The "Processing Log" windows pops up but it is always empty. The "Display Queue" dialog also shows as empty.
I delete the mapping template but I still get the same behavior.
SAP PI 7.1 EHP1
Thanks,
Martin

Problem with empty context.

Error in Mapping Template

Hi to ALL
I have a Mapping Template that worked fine, so I changed (Writed an UDF) and actived it works correctly. But when I open it againg show me an error java.lang.NullPointerException now the mapping is empty and don't show antyhing no source and target . Only can See the description of the mapping no more else.
Can you help me?.

Hi Luis,
I also had the same problem.
You might have something wrong with your UDFs.
Unfortunatelly your mapping is lost.
Re do it again and please check that your UDFs are correct. And if you don't find anything try removing any reference to the UDFs, save and activate.
That might let you open the mapping again.
Later you can use your UDFs one by one to check which one is giving you that problem.
Hope that helps.

Mapping Template : Loosely Coupled or hard Coupled

Hi All
            I m using mapping template for graphical mappng. I have the following doubts:-
     1. Whether the mapping template is loosely coupled or tight coupled , i mean whether it picks the template at run time or the fields are filled one time only.
     2. If we use the mapping template and afterwards do some changes in the mapping template then whether the changes gets reflected in the mapping program or not?
      3. Can we change some fields of the mapping templates used in the mapping program after impoting that template? ( Here changes means changes in the mapping program )
     Regards
         Amit

hi,
>> Whether the mapping template is loosely coupled or tight coupled , i mean whether it picks the template at run time or the fields are filled one time only.
i dnt know whether this is a standard term or not but in these terms i think it is " tight" coupled.
>> If we use the mapping template and afterwards do some changes in the mapping template then whether the changes gets reflected in the mapping program or not?
No changes dont get reflected automatically if u change the template after assigning it in a mapping program.
>> Can we change some fields of the mapping templates used in the mapping program after impoting that template
It becomes a complete separate mapping program altogether even if u use a template. template is only to save ur time of designing mapping it does not contain references at run time. u can change this mapping program at anytime u want.
[reward if helpful]
regards,
latika.

Does mapping exists without mapping templates?

I created a mapping using 4 mapping templates.
When I am deleting the mapping templates it is giving me error that it is being used in the message mapping.
After we created message mapping using mapping templates, if we want to make the mapping as independent of the templates, is it possible?
I dont want to ship too many objects to QA or other systems.
Thanks in advance,
Venkat.

>
venkat a wrote:
> When I am deleting the mapping templates it is giving me error that it is being used in the message mapping.
> After we created message mapping using mapping templates, if we want to make the mapping as independent of the templates, is it possible?
Did you get an Error or an information message?
Mapping template are independent of the mapping. You might get an information message regarding the dependency but it shouldnt be an error. You can ignore the info message.
Please confirm

Standard Mapping Templates for XML to Invoic02

Hi Experts,
I have been provided a customized XML from a partner which needs to be mapped to Invoic02 (Invoice Idoc).
I wanted to know whether there are any standard mapping templates available for standard xml to invoice mapping (Example:
XML standards are followed by xcbl).
I have not been provided with the MIG.This will be helpful to me so that i can initially take up some of the field mappings.
I have the following message which needs to be mapped to Invoic02 idoc :
<?xml version="1.0" encoding="UTF-8" ?>
<BlMessage>
<TransactionInfo AcknowledgementRequested="false">
<MessageSender>XXXX</MessageSender>
<MessageRecipient>XXXX</MessageRecipient>
<MessageID>XXX20090727_140928</MessageID>
<Created>2009-08-18T14:09:28.450-07:00</Created>
<FileName>XXX_310_20090727_140928560.xml</FileName>
</TransactionInfo>
<BL Sequence="1" Purpose="Original" BillType="SeaWaybill" CarrierScac="AAAA" ServiceType="NoCFS" MoveType="PortToPort" ShipmentId="22222" Payment="Collect" BLNumber="11111111">
<References>
<Reference referenceType="MutuallyDefined">20090406</Reference>
</References>
<Voyage>
Thanks,
Sudhansu

I had to create an customized xsd.

Using Mapping Templates

Hi all,
I have created a mapping template that I need to apply inside a message mapping some 10 times.
However, whenever I select target element and source element and I display the available templates for it, and I choose the mapping template that I created , only the header nodes seem get mapped ( I see a mapping line ) but not the sub elements !
I tried to re-activate the template and various other things but result stays the same.
Also note 901113 "Applying a Mapping-Template to a Message-Mapping does not do anything. The Message-Mapping remains unchanged and no error is displayed."
is not relevant as we are on SP15.
Any ideas ?
A related question is that in case I get it to work and you afterwards update the template and acticate, would that 'update' all the message mappings were the template was used or do you need to re-apply manually ?
rgds
Dirk

Hi Dirk,
See if this is of any help.
http://help.sap.com/saphelp_nw04/helpdata/en/79/2835b7848c458bb42cf8de0bcc1ace/content.htm
Regards
Vijaya

Mapping Templates creation and use

Hi All,
I am trying to use mapping templates.
I am trying to create mapping templates from a message mapping .
But "Create Template Based On Mapping" option is disable here.
So how can I create mapping templates?
Again how to use that template?
Any kind of suggestion will be appreciated.
Thanks
Rabi

Select source root node and target root node. Then right cliek and choose the option "Create Template based on mapping" on the target section.
Refer this link
http://wiki.sdn.sap.com/wiki/display/XI/MappingtemplatesinPI7

Could Mapping Template be used in Multi Message mapping

I had a 1:1 message mapping: MM_A
but later i foudd that the mapping should be 1:n
Multi message mapping
so firstly i created mapping template of MM_A
but the template doesn't work when i am doing the multi mapping.
Could Mapping Template be used in Multi Message mapping?
Thank you very much

Hi leo,
<i>
Could Mapping Template be used in Multi Message mapping?</i>
Yes it can be used......
Regards,
Abhy

Do we have an option to keep back up of mapping templates?

Hi,
Can we keep back up of mapping templates by anyway?
can we export mappijng templates to our local machines
in xml format?
Thanks in advance,
Regards,
Ujwalkumar

Hi Ujwal,
Just like you can reuse data types in different message types, you can also save parts of message mappings as Mapping Templates and reuse them elsewhere. Once you have saved a mapping template it serves as a copy template that you can then load into other message mappings and modify to fit your requirements.
check this
http://help.sap.com/saphelp_nw04/helpdata/en/79/2835b7848c458bb42cf8de0bcc1ace/content.htm
Regards
Biplab

URL Mapping template

can anybody send me the url template fraction for user mapping, to integrate yahoomail into EP.
Message was edited by:
suresh kumar

Hi Swetha,
> have used user=<MappedUser>&password=<MappedPassword>
> for the user mapping template and URL template as
> <System.protocol>://<System.server><System.uri>?
> <Authentication>
That's the way it is meant to work...
> in the url template I am not sure, kindly help
Why don't you just read the documentation? To quote from it: "The tag <Authentication> returns the result of either the <UserMappingTemplate> or the <SSO2Template> according to the following rule ... " - just as you have done it.
> Useful answers will be rewarded
Hope it helps
Detlev

Salesforce Objects as Source in Mapping Template

I need mass generation of mappings using Salesforce Objects as a source and Oracle as a target with no transformations. I used cloud version of Mapping Architect of Vision and create a template with normal source and target and Application Source Qualifier. I also mentioned Salesforce as the database type. However, when importing into Informatica PowerCenter Designer, it shows all other sources except for Salesforce sources. What am I doing wrong?

Hi,
When Iam Trying to excute the mapping Which is having Lookup Override (dynamic cache enabled) on Teradata Target tables it causing unexpected error.in lookup i have taken care by giving alias names for all colums and used same in ports.i also maintained column count in override with port columns with same data types.i also maintained same data types for incoming ports with lookup ports.
lookup overide is
Select
CASE When INDIVIDUAL.Birth_Date IS Null Then CAST('01/01/9999' AS DATE FORMAT 'MM/DD/YYYY') Else INDIVIDUAL.Birth_Date End AS Birth_Date,
CASE When INDIVIDUAL.Gender_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Gender_Code) End AS Gender_Code,
CASE When INDIVIDUAL.Individual_Name_Prefix_Code IS NULL Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Prefix_Code) End AS Individual_Name_Prefix_Code,
CASE When INDIVIDUAL.Individual_First_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_First_Name) End AS Individual_First_Name,
CASE When INDIVIDUAL.Individual_Middle_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Middle_Name) End AS Individual_Middle_Name,
CASE When INDIVIDUAL.Individual_Last_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Last_Name) End AS Individual_Last_Name,
CASE When INDIVIDUAL.Individual_Name_Suffix_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Suffix_Code) End AS Individual_Name_Suffix_Code,
CASE When PARTY.Duns_Num IS Null Then -1 Else PARTY.Duns_Num End AS Duns_Num,
CASE When PARTY.Legal_Entity_Code IS Null Then 'NULL' Else UPPER(PARTY.Legal_Entity_Code) End AS Legal_Entity_Code,
CASE When PARTY.Party_Type IS Null Then 'NULL' Else UPPER(PARTY.Party_Type) End AS Party_Type,
CASE When PARTY.SBI_Client_ID IS Null Then -1 Else PARTY.SBI_Client_ID End AS SBI_Client_ID,
CASE When PARTY.Tax_ID IS Null Then 'NULL' Else UPPER(PARTY.Tax_ID) End AS Tax_ID,
CASE When PARTY.Tax_Identifier_Type IS Null Then 'NULL' Else UPPER(PARTY.Tax_Identifier_Type) End AS Tax_Identifier_Type
from
EDW_QI_TDV.PARTY
JOIN
EDW_QI_TDV.INDIVIDUAL
ON
EDW_QI_TDV.PARTY.Party_ID=EDW_QI_TDV.INDIVIDUAL.Party_ID
It Showing error message by giving following description
TRANSF_1_1_1> CMN_1022 Database driver error...
CMN_1022 [
FnName: Prepare -- lookup override(Teradata) problem for Date Ca[ODBC Teradata Driver][Teradata RDBMS] Syntax error, expected something like '(' between the 'FORMAT' keyword and the string 'M' keyword. ]
TRANSF_1_1_1> Mon Feb 13 08:58:37 2006
TRANSF_1_1_1> CMN_1056 Error executing sql statement to fetch lookup data
CMN_1056 [SELECT FORMAT 'MM/DD/YYYY') Else INDIVIDUAL.Birth_Date End AS Birth_Date,
CASE When INDIVIDUAL.Gender_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Gender_Code) End AS Gender_Code,
CASE When INDIVIDUAL.Individual_Name_Prefix_Code IS NULL Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Prefix_Code) End AS Individual_Name_Prefix_Code,
CASE When INDIVIDUAL.Individual_First_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_First_Name) End AS Individual_First_Name, CASE When INDIVIDUAL.Individual_Middle_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Middle_Name) End AS Individual_Middle_Name,
CASE When INDIVIDUAL.Individual_Last_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Last_Name) End AS Individual_Last_Name, CASE When INDIVIDUAL.Individual_Name_Suffix_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Suffix_Code) End AS Individual_Name_Suffix_Code,
CASE When PARTY.Duns_Num IS Null Then -1 Else PARTY.Duns_Num End AS Duns_Num, CASE When PARTY.Party_Type IS Null Then 'NULL' Else UPPER(PARTY.Party_Type) End AS Party_Type,
CASE When PARTY.Legal_Entity_Code IS Null Then 'NULL' Else UPPER(PARTY.Legal_Entity_Code) End AS Legal_Entity_Code,
CASE When PARTY.SBI_Client_ID IS Null Then -1 Else PARTY.SBI_Client_ID End AS SBI_Client_ID, CASE When PARTY.Tax_ID IS Null Then 'NULL' Else UPPER(PARTY.Tax_ID) End AS Tax_ID,
CASE When PARTY.Tax_Identifier_Type IS Null Then 'NULL' Else UPPER(PARTY.Tax_Identifier_Type) End AS Tax_Identifier_Type from EDW_QI_TDV.PARTY JOIN EDW_QI_TDV.INDIVIDUAL ON EDW_QI_TDV.PARTY.Party_ID=EDW_QI_TDV.INDIVIDUAL.Party_ID ORDER BY Birth_Date,Gender_Code,Individual_Name_Prefix_Code,Individual_First_Name,Individual_Middle_Name,Individual_Last_Name,Individual_Name_Suffix_Code,Duns_Num,Party_Type,Legal_Entity_Code,SBI_Client_ID,Tax_ID,Tax_Identifier_Type
if replace first CASE with INDIVIDUAL.Birth_Date it excutes correctly.
when i excuted above query teradata it giving correct values.
Can anybody help regarding this.

Message Data Type mapping

Hello there,
My scenario is SOAP-XI-SOAP. After doing configuration, I was alble to send the message to server. However, I was not able retrieve data at return.
The following are two xml message that I got from server response and from XI.
1. From SERVER response message.
<ns1:doSpellingSuggestionResponse xmlns:ns1='urn:GoogleSearch' xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/' SOAP:actor='http://schemas.xmlsoap.org/soap/encoding/' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'><return xsi:type='xsd:string'>Yahoo!!!</return></ns1:doSpellingSuggestionResponse>
2. From XI
<ns:doSpellingSuggestionResponse xmlns:ns="http://xi.com/googlesearch"></ns:doSpellingSuggestionResponse>
I believe there is something wrong with my data type definition at XI design. I followed the example "How To Use the XI 3.0 SOAP Adapter".
Would anyone please tell me how to define Data Type at XI for data response? Besides, does it have anything to do with Mapping Template.
Please advise.
Thank you very much.
trith.

Satish,
I agree with you. I saw the difference between the response message at the Message Mapping and Message response :
At Message Mapping, the xml message is displayed as :
<ns0:return xmlns:ns0="urn:GoogleSearch"/>
At runtime, the message response is:
<ns1:doSpellingSuggestionResponse xmlns:ns1='urn:GoogleSearch' xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/' SOAP:actor='http://schemas.xmlsoap.org/soap/encoding/' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'><return xsi:type='xsd:string'>Yahoo!!!</return></ns1:doSpellingSuggestionResponse>
The wsdl external definition which I got from :
http://api.google.com/GoogleSearch.wsdl
If you said there is some problem with xsd, how I am supposed to fix that? Would you please give me more hints?
Thank you very much.
trith.

Mapping template

Similar Messages

Maybe you are looking for