Mapping Templates creation and use

Hi All,
I am trying to use mapping templates.
I am trying to create mapping templates from a message mapping .
But "Create Template Based On Mapping" option is disable here.
So how can I create mapping templates?
Again how to use that template?
Any kind of suggestion will be appreciated.
Thanks
Rabi

Select source root node and target root node. Then right cliek and choose the option "Create Template based on mapping" on the target section.
Refer this link
http://wiki.sdn.sap.com/wiki/display/XI/MappingtemplatesinPI7

Similar Messages

Menu Creation and Using the SELECT soft key

Hi,
I am trying to design a menu similar to the thumbnail menus available in most phone these days.what i want is a set of icons placed in a tabular format ie rows and colums. the joystick control can be used to navigate thru the icons and using the select soft key ie the middle button of the soft keys, the next set of forms can be displayed.
so far, i have created a form, used a few image item and used the Item's layout directive to arrange the imageItem as i want on the display. I can get the joystick to navigate between the imageItems however the select button doesnt fire any event.
I have added a command to each of the items and set an ItemCommandListener.
That approach seems to be working fine but it defeats my purpose. the reason being i had problems with the mapping of the command keys. For each display i had an option of going to the main menu and to the next screen. On the emulator it maps perfectly with the left key having the main menu and the right key having the "next form" button. But while implementing on the phone, the left key has the main menu but the right key shows "more options", when u click more options you get the "next form" button. This is happening in every form on display and makes it more tideous to use.
Thats why i was hoping to get the select button working if possible. Any help would be much appreciated.

Try searching J2mepolish.org plenty of work is done
with Regards
Rizwan

Financial Report Templates - Creation and input of accounts

Hi,
At the time of creating Financial Report Templates, these templates can be very time consuming and tedious to create, as for the inputting of accounts within each account category - filling out one or more details...
It would be helpful to have some kind of tool in which we could associate like in the GL all the sub accounts withing that account.
I hope I have been clear enough,
Regards
Vivek Chand

Hi:
I'm agree with your post, all my customer are very angry with this functionality because the want use wildcards for input the account, if i input 71* the template will show all account which begin with 71.
Now when they create a new account into the financial plan of accounts they must create also into the report templates and this work is hard and spend a lost time in it.
Best Regards
Joaquin Gomez

Lookup creation and using this lookup in SQL query

I Have two tables one table called T_KEY_VALUES (KEY_ID , VALUE) and other is my transition table T_TRANSACTIONS (VERSION_ID , COL_VENDOR , COL_PREFIX, COL_RECIPTID , COL_STATE , COL_COUNTRY ..)
The data looks like below:
T_KEY_VALUES:
KEY_ID , VALUE,
10, CA
11, NY
13, NJ
20, USA
21, CANADA
101 , AMC
102, REGAL
1001, MOVIES
1002, MALLS
T_TRANSACTIONS:
VERSION_ID , COL_VENDOR , COL_PREFIX , COL_RECIPTID , COL_SATE , COL_COUNTRY
1, 101 , 1001 , 100001 , 10 , 20
2, 102 , 1002 , 100002 , 11 ,20
Generally, COL_VENDOR, COL_PREFIX , COL_STATE , COL_COUTRY field values exist in the T_KEY_VALUES table.
So How can I use T_KEY_VALUES as Lookup and write the one SQL query to get the data like below:
1, AMC , MOVIES , 100001 , CA ,USA
2, REGAL , MALLS , 100002 , NY , USA

Hi,
One way is to join t_transactions to 4 copies of t_key_values:
SELECT t.version_id
,       v.value           AS vendor
,       p.value           AS prefix
,       t.col_reciptid
,       s.value           AS state
,       c.value           AS country
FROM    t_transactions t
JOIN    t_key_values    v ON v.key_id = t.col_vendor
JOIN    t_key_values    p ON p.key_id = t.col_prefix
JOIN    t_key_values    s ON s.key_id = t.col_state     -- or col_sate
JOIN    t_key_values    c ON c.key_id = t.col_country
If you'd care to post CREATE TABLE and INSERT statements for the sample data, then I could test this.
The query above assumes all 4 coded columns in t_transactions have matching values in t_key_values, as they do in the sample data. If that assumption is wrong, then use outer joins in some (or all) of the places where I used inner joins above.
Another approach is to UNPIVOT t_transactions into 4 times as many rows, do a single join to t_key_values, and then PIVOT those results back to the original number of rows.

VARIANT - CREATION AND USE

Dear Guru's
Can you tell me what is use of variant and what are steps to create variant
Thanks
Bhaskar

Dear,
Better way to understand variant is like a saved document where specific settings have been made and whenever you want to see that you open that document.
Let's take a scenario. There is a requirement that in FBL3N screen default items are required like G/L account - 450000 to 480000, company code 1000 and open item date to be 01.04.2009 to 30.04.2009. How will it be done.
Answer is to create variant.
Use transaction FBL3N, insert the above mentioned information into respective fields then click on save icon which will direct you to create variant screen. Here give the name of variant and maintain status of the fields that you must be aware of and save it. Result is you have create variant.
Use Next time whenever you execute FBL3N and want above data to be filled then don't fill them but click on get variant.... icon beside the clock and enter variant you had created. So, all the value saved in the variant will be defaulted.
Variant saves your time from doing the repetitive tasks every time.
Regards,
Chintan Joshi.

Passphrase creation and use

Cant I make a passphrase with my wrk54g wireless router for security? I tried it and it wont work, I still have to put in the whole wep key when I log on from my laptop the first time instead of just typing in my passphrase. Help please?

Don't use WEP. Use WPA or WPA2 with a preshared key (PSK or sometimes called "Personal").
For WEP there is no real standardized algorithm how to derive the wep keys from the passphrase. Therefore it often depends on the software you use. Windows Zero Configuration does not support the passphrase for wep keys for this very reason. If you use WZC (i.e. Windows configures the wireless connection) you must enter the wep keys and not the passphrase. If you use some other software you may be able to enter the passphrase. However, the generated keys may be different if it is not a Linksys adapter.
Use WPA or WPA2 instead. The passphrase algorithm is defined for WPA and WPA2 thus you always enter the passphrase even with WZC.

Account creation and use...

I created a skype account from Arizona, US for my mother that lives in San Diego, US... The account has been created correctly, I can login from my computer...
But, my mother cannot login from her computer in another state...
Should this be happeneing? or is my mom inputing the wrong name and pass?
Thanks in advance,
Kyle

The problem is at your mother's end, either with your computer or how she's trying to login. There's no restriction anywhere in the world to where you can signon to aSkype account, with the possible exception of a few countries where the government blocks Skype access.
Are you sure that your mom has the Skype program installed on her PC, and that she's not trying to logon through the Skype website?
Please note: I do not respond to requests for help via Private Message.

How to use XDOXSLT in rtf template layout for etext template creation

<DEFINE CONCATENATION>     BookDetails
<BASE LEVEL>     Category
<ELEMENT> Name || '/' || Price
<DELIMITER>      '/'
<END DEFINE CONCATENATION>     BookDetails
With EFTProcessor the above details are created in xsl file as follows
<xsl:template name="CONCAT_BookDetails">
*I need to declare one more variable here
EG: <xsl:value-of select="xdoxslt:set_variable($mycount, count(.//Category))"/>
--and use this variable for any dyanamic process inside this template. How to achieve this in rtf template by declaring a xdoxslt function. How to declare this
syntax in rtf layout so that it creates a varibale in xsl template using the EFTProcessor. Please help me out. The main point here is to include xslt functions in
rtf template layout for etext template creation.*
<xsl:for-each select=".//Category">
<xsl:call-template name="CONCAT_BookDetails_V"/>
</xsl:for-each>
</xsl:template>

in the next time use BI Publisher forum - BI Publisher
<?format-number(ENTERED_CR,'##,##0.00')?>it's works for me
output:
444    -> 444.00
444.55 -> 444.55

[svn:osmf:] 13042: Fix for FM-287, reinstating the main sample ( that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash .

Revision: 13042
Revision: 13042
Author:   [email protected]
Date:     2009-12-17 03:45:27 -0800 (Thu, 17 Dec 2009)
Log Message:
Fix for FM-287, reinstating the main sample (that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-287
Modified Paths:
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/HTMLGatewaySample.as
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
    osmf/trunk/framework/MediaFramework/org/osmf/external/HTMLElement.as
    osmf/trunk/framework/MediaFramework/org/osmf/gateways/HTMLGateway.as

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

Using Mapping Templates

Hi all,
I have created a mapping template that I need to apply inside a message mapping some 10 times.
However, whenever I select target element and source element and I display the available templates for it, and I choose the mapping template that I created , only the header nodes seem get mapped ( I see a mapping line ) but not the sub elements !
I tried to re-activate the template and various other things but result stays the same.
Also note 901113 "Applying a Mapping-Template to a Message-Mapping does not do anything. The Message-Mapping remains unchanged and no error is displayed."
is not relevant as we are on SP15.
Any ideas ?
A related question is that in case I get it to work and you afterwards update the template and acticate, would that 'update' all the message mappings were the template was used or do you need to re-apply manually ?
rgds
Dirk

Hi Dirk,
See if this is of any help.
http://help.sap.com/saphelp_nw04/helpdata/en/79/2835b7848c458bb42cf8de0bcc1ace/content.htm
Regards
Vijaya

Idm-Vaau Rbac role creations and mapping

Hi All,
I'm working on the integration between Idm and Vaau's Rbacx (role based access control) tool for role creation and provisioning...I've imported the spml.xml and SPMLGetObjectsform.xml into Idm for the SPML calls between Rbacx and Idm.
The challenge I'm facing is mapping the attributes of Rbacx roles to enable the attributes to be populated in Idm...I'm able to export roles into Idm, but they are not populating with any attributes eg. resource type, resource attribute etc. I'm uncertain as to where I have to map these properties and do any customization for this to work. I would appreciate if anyone who has worked on this or know how to do this, to pls give me some pointers/share your experience. I don't have any documentation to refer to and am doing everything on trial and error basis.
Any help is greatly appreciated!
Thank you.

Hi newbie,
Were you able to solve this issue? I am facing the same problem while assigning resource attributes for a created role using a custom workflow.
This is where I set the resource attributes in my workflow:
<Action id='1'>
<expression>
     <block trace='true'>
     <set><ref>role</ref><s>assignedResources[AD].attributes[AD Groups].valueType</s><ref>ADGroupsValueType</ref></set>
     <set><ref>role</ref><s>assignedResources[AD].attributes[AD Groups].requirement</s><ref>ADGroupsRequirement</ref></set>
     <append><ref>role</ref><s>assignedResources[AD].attributes[AD Groups].value</s><ref>ADGroupsValue</ref></append>
     </block>
</expression>
</Action>
where <ref>ADGroupsValue</ref> contains the attribute value.
thanks,
Lokesh

Automate DBAdapter creation and testing using ANT

I am using SOA suite 10.1.3.1.
I would like to automate creation and testing of DBAdapter and I know that we have some ANT task to create and test connection pool and datasource like
createJDBCConnectionPool
createManagedDataSource
testConnectionPool
testDataSource
etc...
but I fail to found ANT task for DBAdapter.
It would be grateful if someone can tell if it exists or not.

sure, it's my pleasure.
Before running the code, please read the following document first. They talked about how to use JMX to control the AS. Basically, you will need the admin client library to do the job as Oracle don't use JRMP, so you need the library to provide the underlaying protocol(i.e. ORMI).
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/adminclient.htm#CHDGIAEI
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28952/mbeans.htm#CIHCCAFJ
here comes the sample code
String url = "service:jmx:ormi:///opmn://<host>:<opmn reuqest port>/<OC4J instance for BPEL>";
String login = "<username>";
String pass = "<password>";
String mbeanName = "oc4j:j2eeType=JCAConnectionDefinition,name=javax.resource.cci.ConnectionFactory,ResourceAdapter=Database Adapter,ResourceAdapterModule=DbAdapter,J2EEApplication=default,J2EEServer=standalone";
String opName = "addConnectionFactory";
// connection setup
JMXServiceURL serviceURL = new JMXServiceURL(url);
Hashtable credentials = new Hashtable();
credentials.put("login", login);
credentials.put("password", pass);
Hashtable env = new Hashtable();
env.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "oracle.oc4j.admin.jmx.remote");
env.put(JMXConnector.CREDENTIALS, credentials);
JMXConnector jmxCon = JMXConnectorFactory.newJMXConnector(serviceURL, env);
jmxCon.connect();
MBeanServerConnection mbServer = jmxCon.getMBeanServerConnection();
// prepare parameters for the invocation
Object[] param = new Object[4];
param[0] = "<JNDI name of the DbAdapter>";
Map temp;
param[1] = temp = new HashMap();
temp.put("defaultNChar", Boolean.FALSE);
temp.put("platformClassName", "oracle.toplink.platform.database.Oracle9Platform");
temp.put("sequencePreallocationSize", new Integer(50));
temp.put("usesBatchWriting", Boolean.TRUE);
temp.put("usesNativeSequencing", Boolean.TRUE);
temp.put("xADataSourceName", "<dataSource name>"); // assume that the dataSource is created somewhere else
param[2] = new Integer(1); // 1 for private connection pool
param[3] = ""; // connection pool name, not useful for private pool
// prepare signature of the operation which we would like to invoke
String[] signature = new String[4];
signature[0] = "java.lang.String";
signature[1] = "java.util.Map";
signature[2] = "java.lang.Integer";
signature[3] = "java.lang.String";
ObjectName beanName = new ObjectName(mbeanName);
mbServer.invoke(beanName, opName, param, signature);

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

How to store the value of request message and use it in Response mapping

Hi All,
We have an requirement where we need to store the data coming in Request Mapping and use the stored value in Response Mapping. Can anybody help us in how to proceed?
Thanks
Sujata

Hi!
In Mapping you may use the RFC Lookup function to store values in database table during request mapping and to read values from database table during response mapping.
You can also use an ABAP or Java Mapping "in front of your" message mapping to store/read the values.
You can also use an Adapter Module (if applicable for the adapter type you use) and/or a UDF to store the data e.g. in Dynmaic Configuration Header of Request Message and to read these data from Dynamic Configuration Header of Response Message. But this works only for synchronous scenarios (and it means overhead in your message traffic).
Hope these thinkings help you o find the most suitable way for your concrete scenario!
Regards,
Volker
Note:
These techniques help you to avoid using BPM.
Edited by: Volker Kolberg on Aug 27, 2009 11:18 AM

How can i store and use maps in 5800

I was stunned when my new nokia 5800 hanged when receiving a operator status message after call which shows call duration, so i had to update my phone firmware using nokia pc suite.
Now all of sudden the nokia maps icon seems to have disappeared, am trying to find out how i can download the maps to my memory card and access it for directions and not able to find a way to do the same.
This link says
To update the maps on your device:
Select Options > Tools > Settings.
Select Map > Options > Check for map updates.
whereas the second option is completely different for me, when i select map and options i do not have "Check for map updates" option
And the Nokia map loader in my pc suite dosent seem toopen the maps suite, nothing happens when i click the icon
Are these because of my updation ? If so can i revert it back to my old one ? please help as am completely finding it different from the old one
Message Edited by solofight on 27-Nov-2009 03:04 PM
Solved!
Go to Solution.

here is a fundamental difference between the way every other sat nav manufacturers charges compared to the Nokia charging concept.
Nokia requires you to renew your subscription but they throw in all the software and map upgrades for free.
The rest of the world charges you for a sat nav unit, software and a set of maps which you can theoratically use forevermore but in practice you will get increasingly more frustrated as your maps slowly but surely go obsolete. When you finally get too frustrated you will be told that a new set of maps will cost almost as much as the cost of the sat nav.
As maps are generally updated quarterly, you almost have the latest maps with Nokia Maps whereas map updates for other systems generally cost aroung €80 a pop. Do your sums and you will see it it isn't bad value at all.
I have been using sat navs since 2004 and personally I think there is nothing more frustrating than a sat nav that is contantly leading you the wrong way around one way streets due to obsolete maps.

Mapping Templates creation and use

Similar Messages

Maybe you are looking for