Mapping Text To a Partial Cube

I've got a line of text that I need to map to three sides of a cube. I want the type to run from the front across the right side and end on the top.
1) Can I do this in Illustrator?
2) Can I flatten the sides so I can print each one on its own page and assemble the partial cube to show what it would look like when produced?

Perzackly :-) Trouble is that with Illy's 3D thingummy is you have to rely on the preview for accurate alignment on the cube faces.
In this respect Dimensions was a much better application for this kind of work. Not only were Symbols unnecessary (you could paste directly into the mapping window) but you could also see all faces of such a cube at once, so alignment was not the remotest problem. I do wish they would bring back Dimensions or couple it in as a part of Illy. Then we could do proper 3D work and create whole scenarios, not just single objects. I don't understand how people are expected to create scenarios accurately without very complicated geometrical calculations to find out the relative positioning of different objects. We need to be able to call up top, side and off-centre views of a set of objects together, adjust relative positioning and then do a final render. I haven't been able to find anything that comes close to Dimensions in this respect. Everything I have come across lately produces only pixel output when what we really need is vector output that can be fine tweaked in Illustrator.

Similar Messages

  • Interactive boxes (e.g. google maps text box) and drop-downs from those boxes go blank white.

    So for certain websites//boxes when I open them they are just blank white, or toolbars on websites will also randomly go between visible and completely white randomly as I scroll. So for example the facebook toolbar randomly goes white, when I try to check my messages//notifications it goes white, the google maps text box and all the drop downs are completely white, etc.

    You can try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Extracting PAGEID and Text Description from Statistics cube

    Hi SDN Community,
    Can anyone please confirm that the following approach to extract the PAGEID and its text is the only way to do so:
    As i cannot find the PAGEID field in any of the 0BW* statistics cube, we will create an infoobject and add it to one of the cubes.
    Then Map PAGEID from RSDDSTAT to Field: OBJID from Table RSZWOBJTXT
    (This mapping between the tables RSDDSTAT and  RSZWOBJTXT can then be used to retrieve the web page description from the field TXTLG)
    Thank you for your assistance.
    Simon

    The PageID is not in the statistics cube

  • Mapping for fields in Standard cube

    Hi,
    There arent any mappings for the date related fields 0RPM_MONTH,0RPM_YEAR,..etc. in the business content cube 0RPM_c02 capacity management. I could not find any relevant mappings in sap help also.Please provide any pointers as to how to update these fields as these are the main field in the standard BC reports.
    Thanks & Regards,
    Rathy

    Hi,
    Because there no data in these fields 2 of the standard reports return with no applicable data.But all other fields in the report have appropriate data.What i would like to understand is since it is being used as main field in the report and not been provided a mapping in BC based on what shall go and update it so that i can get data in the report.
    Thanks
    Rathy

  • How to map text payload (Not XML) to IDOC

    Hi All,
    In a scenario wherein I am getting a Text file as a Outbound Payload in XI (It is not a XML file - simple text Payload file which we see in SXMB_MONI) through XI Adapter and I need to map the text file to IDOC.
    I can not use here File Adapter (File Content Conversion) as Incoming file is not stored at any location and it is just pushed to PI Server.
    However I am not able to visualize how the text Payload will be read and mapped to IDOC.
    Your inputs will be highly appreciated.
    Regards,
    Nitin Patil

    I can not use here File Adapter (File Content Conversion) as Incoming file is not stored at any location
    and it is just pushed to PI Server
    Which adapter are you planning to use in this case? If not FCC then you can also opt for MessageTransformbean to do the conversion....for more information refer this blog /people/gabrielsagayaselvam.panneerselvam/blog/2009/12/07/standard-adapter-framework-modules-afmodules-in-pi-71-150part-2 (also check the embedded blog reference given by the author)
    What is the content (format) of the file....even a .txt file can have a XML message......just that we need FCC or above bean when the file is a CSV file.
    Regards,
    Abhishek.

  • How to map text(n) in access to varchar2(2n) ?

    Question 1:
    Because some asian characters count 2 bytes in oracle
    while they count only 1 character in access, I want to map
    any text column with length (N) in acccess to varchar2(2N), so that there won't be any data loss.
    I tried changing it in 'data type mapping' page of capturing wizard.
    I set 'length' of text->varchar2 mapping to 2.
    I Also tried changing Options from tools menu before creating oracle model.
    But the oracle model created wasn't affected by this setting. In oracle model, the result is still varchar2(n)instead of varchar2(2n)
    any suggestion?
    Question 2:
    So I tried to change the size of columns in oracle model.
    ( eg: change varchar2(40) to varchar2(80) )
    Partly it worked.
    The columns created in destination oracle database are 80 bytes long,
    but the data migrated was cutting off at 40, the rest was gone.
    any suggestion.
    ps.
    access 2000 -> oracle 10gR1
    omwb 10.1.0.4 ( win2000 sp4 )

    Hi, turloch
    Zfan,
    -Are you getting this problem only on text to
    varchar2?as far as i know, yes. only on text -> varchar2.
    i changed the mapping of text->varchar2 in tools->option->data type mappings
    set it to 3 then recreated the oracle model as being prompted.
    but the mapping is not correctly reflected in the resulting oracle model.
    -Does setting the target for Text to varchar2(4000)
    help? [click on the field change to 4000 then click
    on another field before clicking ok]yes. i've tried. setting it to 4000 makes all the varchar2 column 4000 bytes long.
    i also tried 100, makes all the varchar2 column 100 bytes long.
    i also tried 90, no effect.
    -Is this a general problem or a specific problem?
    i.e. Does this happen on memo to clob
    conversion...(As well as local testing here in
    Dublin, Ireland, testing is done in Japan which I
    would expect to catch most multibyte character
    issues)i don't know abt. memo-> clob. never tested it.
    but for text-> varchar2, it definitely got some problem.
    >
    The columns created in destination oracle databaseare 80 bytes long,
    but the data migrated was cutting off at 40, therest was gone.
    This sounds like a bug, is this reproducable, for a
    test case, and does it occur in other conditions?
    i can provide screen shot or test case if you want.
    can upload them info oracle files so that you can download it.
    Regards,
    Turloch
    Oracle Migration Workbench Team

  • How to map text from Request Offering to custom textbox

    Hi!
    I have new custom Tab in Incident form with new textbox. I need this textbox fill with text added by user on Portal, but I can't figure out how to map user input to this text box. I can't see it in Request Offering form. Also when I create binding from this
    form to extension of Incident Class, I can't change older Request Offering mapped to Incidents.
    What can I do to make this work correctly?
    Thanks

    User's answers from Request OFfering are stored in one field called UserInput. As result:
    You can't bind control to specified answer
    You can create your own control\converter to parse UserInout field (this is XML text)
    SCSMSolutions
    email: freemanru (at) gmail (dot) com

  • Mapping text in smartforms

    How can i map the <b>header text</b> or <b>item text</b> in a smartforms .

    thanks for reply ,
    I have all ready done these things which u suggests me but still i dont get expected result.
    these r the details which i have done .
    text-include text .
    Text name : &g_tdname&
    Text Object : j1ii for out going Excise invoice
    Text id : 0001.
    language : en .
    pls suggst me the solution for this.
    Thanking you !
    Prasad.

  • Mapping text item

    hi
    i have a form component text item in oracle forms6i. so i created a <af:inputText> in my jsp page. and i gave the width and height same as the value of form's component text item in pixels.
    The problem is that even though i gave the same value for the <af:inputText> , in jdev11 it appears to be slightly greater than the appearance that is in oracle forms 6i.
    i want text box to be appear same in both environment.is there any way to change it.
    i mean
    1px in forms = "------"px in jdev11.
    so that i can get the same appearance.
    is there in pixel difference between forms and jdev???
    i dont know whether i conveyed my doubt properly.hope u understood my doubt.
    rgds

    Lets try this.  I included the line item segment (E1EDP01) and example text for each line item.  I am mapping the line item text when E1EDPT1-TDID = Z001. 
    E1EDP01
    ..POSEX (00010)
    ....E1EDPT1
    ......TDID (Z001)
    ........ E1EDPT2
    ...........TDLINE (text aaaa)
    .........E1EDPT2
    .......... TDLINE (text bbbb)
    ....E1EDPT1
    ......TDID (Z002)
    ........ E1EDPT2
    ...........TDLINE (text yyyy)
    .........E1EDPT2
    .......... TDLINE (text zzzz)
    E1EDP01
    ..POSEX (00020)
    ....E1EDPT1
    ......TDID (Z001)
    ........E1EDPT2
    ...........TDLINE (text cccc)
    ........E1EDPT2
    ...........TDLINE (text dddd)
    ....E1EDPT1
    ......TDID (Z002)
    ........ E1EDPT2
    ...........TDLINE (text wwww)
    .........E1EDPT2
    .......... TDLINE (text xxxx)

  • Map text with attribute of personal number

    Hi
    I have structure , this structure is coming ( PA0002) + extra fileds like qualification..( text)
    we have written generic extraction by function module for this requirement
    my structure showing some char and text ( like char ).
    in BI system
    i created PERNR ( object) and attributes
    in attributes i created text also
    can i map source text to my attributes text?
    is it fine?
    ple let me know

    hi srinivas
    thak u very much, i posted other query,
    when i select variable at wad i am getting extra columns also which is not necessary, can u rely that ple

  • Enhancement to map texts from SRM to ECC

    HI guru's,
                        I am working on SRM. the requirement is to map SRM texts of Purchase order to ECC(R/3) purchase order.
    for this I am using a BADI bbp_longtext_badi. 
    when I create text in SRM or if I change text in SRM PO its getting reflected, but If I delete the text of PO its not getting reflected means if I delete the text in SRM in ECC also it should be deleted but this condition is not working. If any body knows plz help me its urgent.
                                                            thanks.

    Hi,
    Try with the BADI --> MRM_PAYMENT_TERMS.

  • Mapping Text-ID

    Hi,
    is it possible to map a text-id of textobjects other than kna1 from R/3 to CRM?
    Thanks in advance
    Tobias

    Hi  Experts,
    I am new to XI, so only elaborate answers would help me
    This is the specific requirement i want;
    There is a 'source text file' which is a collection of 1000+ records, I want to make a 'target file' which is a combination of 2 fields, one field will be the dynamically generated name [for the target file] and the other field will be the whole 'source file' content.
    From the last response for my question, I understand the dynamic file generation part can be done using java mapping.
    Is there anyway by which I can get in the whole content of the source file into a field in the target file?
    Thanks in Advance
    Thomas

  • AutoDesk Map text to Oracle

    Hello,
    I am student and very much a newbie. I have text data with in AutoDesk Map that I would like to write back into Oracle Spatial. I have created my connection to oracle using OO4O and have tested it. I understand the sdo_geometry creation, but I do not understand the relationship between the sdo_geometry and the actual text element. Do anyone have any ideas?
    Tammy

    I can use the GIS_ID, which is unique. I what I have are area labels for my cadastral polygons. I need to have these text entities put back into oracle as a new feature layer, so that when I read them back into AutoDesk Map they are in the right location.
    thanks,
    tammy

  • HP C6150 All-In-One Will Not Print Black Text But Does Partial Test Print

    Hi.  Thanks in advance for any help anyone can proffer.
    I've read through the forum and I think there are some similar issues, but none exactly the same as ours.
    This HP C6150 does print pictures, but suddenly stopped printing black text.
    HOWEVER, the test prints will print in black with the Windows Logo, but will not print any associated text.
    Odd.  It just suddenly stopped printing.
    Variables:
    C6150 All in One - No other problems for two years.
    Using refilled ink cartridges from outside source. (not my decision)
    Ink is full.  No other changes made in last three days.
    Troubleshooting Steps:
    Uninstalled and then re-installed software in entirety.
    Put in 'new' (refilled) cartridge for black and magenta.
    Tried (not sure if successful) soft reset.
    Tried cleaning the print cartridge with 'Q-Tip' and distilled water.
    Have not yet spent money on new OEM print cartridges.  That is next step unless other suggestions merit.
    Possibilities:
    It may be the refilled cartridges, but they've worked so well in the past.
    The cartridge prior to the recent replacement was working fine and was not yet out of ink.
    The print head might be damaged.  But this should/would affect all black printing and this is not the case.
    Were the driver corrupt, the reinstall should have fixed it ... you'd think.
    So, we're looking for some suggestions prior to going out and getting a new printer.
    Thanks again, in advance, for constructive non-judgmental suggestions.
    MackNC

    The likely cause is the black ink is not printing at all.  When printing graphics (like the Windows Test Page) black is made from mixing the color ink.  I would suggest printing an internal diagnostic test page as shown in this page.  Does the black block print?  If not then clean the printheads as described here.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Map Datasource field NUMC to Cube Key Figure

    Hi ,
    How do we go about mapping a NUMC field from the datasource to a Key figure(DEC) in an InfoCube?

    Hi Ravi,
    Thanks for your answer, first i unmapped in transfer rules as per your sugession and executed the infopackage but the data has come when i was unmapped in update rules the data has not come.
    My doubt is when i was unmapped in TR even though the data has come, so what is the use of unmapped here.
    and how to unmapped char
    please clarify my doubt
    David
    Edited by: david Rathod on Jul 22, 2010 5:40 PM

Maybe you are looking for