Mapping validates and generates ok but get pl/sql warn in deploy

Hi there
Can validate and generate mapping ok but when deploy get various pl/sql error messages such as error ... coulmn ignored
Anybody seen this sort of thing?
I'm new to OWB but would have hoped the validate stuff would pick up any bugs
otherwise not very useful since now have to go back to mapping and rip bits out and use deployemnt as a validation check.
Any Ideas?
Many Thanks

The validation are only relevant with the design repository. It only validates with whatever is there in the design repository matches with the mapping that you have created. It does not tell you if any column in a table is missing in the database.
Secondly some expression are not validated at times and gives warnings/errors only at deploy time. Probably this is what has heppened with you. Check your expressions, if they are syntactically correct or not and then try deployign again.
HTH
-AP

Similar Messages

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?

The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.

Cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

cd drive on my laptop not seen as a device. Can refresh itunes and device appears but get unknown sync error 13019 when transferring cd's to my nano. The cd's appear on the nano when it's connected to itunes but aren't there when I disconnect?

Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike

Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

Sulapeace,
for how long has your MacBook Pro been recharging? Has the light on your MagSafe connector changed color since you’d started recharging it? What do your battery level indicator lights show when you press the button next to them?

HT2188 Received error message, suggested uninstall and re-install but get message I don't have priveges to install i-tunes.

Received error message, suggested uninstall and re-install but get message I don't have priveges to install i-tunes.

Hello murray103
Check out he article below to troubleshoot your install issues with iTunes. You may need to right click on the install file and click Run as Administrator.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Regards,
-Norm G.

SB live! external. logitech-z680.Spdif output and Optical output , but get only 2

Hi there,
I buy now a SB li've external.i use? Spdif output and Optical output .But i get only 2. voice
i dont get 5+ voice with Spdif output and Optical output .
I wait your help.

But to use the receiver's DAC's you'd have to lose the accuracy advantage of real digital (i.e. the "better" sound). When you convert non-AC3/DTS sound to AC3/DTS, the conversion involves "perceptual coding," which means they throw away stuff they don't think you can really hear so that the signal can be fit in the same space as a stereo digital signal.
It's also a relati'vely compute-intensi've conversion, and not a simple process.
Now, are you sure really want to do that?
-Dave
?[email protected]
P.S. What make/model receiver do you have?

Where and how do I get the SQL Query used by the Microsoft Generic Report Library - Alerts?

Background:
I'm tasked with the following: I need to create a new Report and the SQL
The two canned reports that I can pattern after are: Microsoft Generic Report Library
- Alerts (there is also an alert detail report that can be chosen within the alert report that we may want to use instead)
- Most Common Alerts
I'm trying to do this:
Add another parameter to search on customfield3.
It should be able to report on all alerts that were assigned to the specific team for the time period along with the top 10 (most common alerts) assigned to the team for the time period.
Choose as the objects (group) all servers, but Imay need to adjust the report to just look at all alerts without having to provide objects or a group
The struggle I'm having is: I know SQL. I know how to create an RDL file.
But Where are the RDL files for the canned reports so I can modify the canned RDL and modify its SQL and forms?
What is the SQL/ where can I find the SQL used for the Generic Report Library -> Alerts

Easy but you need to extract it from Microsoft Generic Report Pack.
So.. the procedure is as follows:
1) You export and unseal Management Pack from your SCOM using
Boris's OpsgMgr tools (MPViewer
2.3.3)
2) Ok you've got unsealed xml, now the tricky part, use
MpElementsExtract tool, example of usage:
MPElementsExtract.exe <MP.xml> /ex /destination:<destination>
That you way you get several folders out of mp:
DWScripts, DWSubScripts, LinkedReports, ReportResources, Reports
Take a look into content of first 2, there will be pure sql scripts, and rdl's are in Reports folder :)
Other way is to just use SQL profiler and catch SQL query while generating report.
--- Jeff (Netwrix)

HT201514 Trying to back up Time Machine to My Passport Air external hard drive, which is supposed to be compatible with my iMac and Mountain Lion, but get the message: Unable to complete backup. An error occurred while creating the backup folder. Help!

Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

TS5376 itunes 11.1.4 for Windows Vista - I've uninstalled prior version and associated applications, but get message"cannot download" the exe file. Why?

Followed instructions to uninstall iTunes and related components and files, but still get error that the "exe" file cannot be downloaded. Any suggestions on what to do next? This all started because I wanted to sync my iphone to the computer.

I was able to successfully download iTunes after repeated attempts to remove Apple Mobile Device Support finally worked. Had to repair, re-install, then uninstall it. Found useful tips on how to do that in topic "Troubleshooting issues with iTunes for Windows Updates" by turingtest2. After that, my browsers (IE or Firefox) would only partially download the iTunes install file. So paused virus scanner and Windows Defender. and uninstalled iCloud. Eventually IE downloaded the "exe" file and I was able to run it (albeit with several false starts).
Now trying to reinstall iCloud.
thanks for your help.

I was promised not to bother about typography and html coding but get strange htmlcodes instead of ñ

I tried to plug in in another conversation about my problem with Muse and strange htmlcodes instead of special types. (such as ñ, •, '', etc)
I tried different ways to upload the website to my server.
I asked my provider, but as he said: your other websites looked fine, it aint us
I have no clue how to handle it with html programation, as for this reason I bought, legally, paid and all, Muse CC.
Now I have to upload my website to the server of the cliënt, since it all looked fine on the preview site of Adobe, and now it looks awfull.
I do not get any new reactions on the thread I plugged in, so I made a new one because I am really desperate.
Please, what do I do?
I have uploaded with FireFTP, Fedge, directly from the muse page
It is all the same.
Thank you,
addi

I was told to put this in the header
<META HTTP-EQUIV="content-type" CONTENT="text/html; charset=ISO-8859-1">
so I openend the file in dreamweaver, to put it on top of the page
it did change the bullet into something else, but stil not a bullet.
Is there maybe another code I should paste in top of the header? although I think its pretty weird havingto do so..
kind regards
addi

I have a new computer, and downloaded iTunes but get an error message (Error 2) that Apple Application Support was not found. I have Windows 7

It tells me to uninstall, then reinstall iTunes, but I got the same result after I did that. What do I do now?

I tried to install the iTunes64 for Windows, but got an error message that iTunes64Setup.exe is not a valid Win32 application.
That usually indicates the installer has gotten damaged during the download.
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
If you can't get a working installer via the standard download links, try the following download links instead:
iTunes 11.1.4 for Windows (32-bit) - iTunesSetup.exe
iTunes 11.1.4 for Windows (64-bit) - iTunes64Setup.exe

Trying to reformat and reinstall windows but get black screen with cursor

Im trying to reformat my computer after a blue screen error and when i pop in my disk to reformat and install it goes through the first stuff...opening files then it says starting windows and then black screen with cursor..nothing else..i can move the
cursor but i cant click anything..nothing happens.

Hi Marrik,
Is there any error code or error message displayed in the installation process ? because just based on your description in the post, it is difficult to find the root cause for a black screen even after a clean install, this might be caused by a corrupt installation
media or a hardware issue, so, I give two potential suggestion:
1.Try another Windows installation media and perform a clean install again to see the result.
2.Go to the computer vendor for hardware support, this also can be caused by a memory or hard disk issue.
Regards
Wade Liu
TechNet Community Support

Battery shows 100% after charge but get the 20% warnning after a few mins

i got the new white ipod touch 64gb after charging for its 4hrs the battery was full and at 100%
after taking it off its charge and starting a game/app after about 2 mins it showed the battery is below 20% so i quit the game and opened my battery pro app and it shows the battery is 96% but when i start the game again the battery shows th 20% but when looking at the battery at the top its showing its full white

Apple recommends the you periodically fully (almost fully) discharge and fullycharge the battery to calibrate the battery meter. I would try that.

Converting BAPI to webservice and generating WSDL

Hi All
We are using ECC 6.0 and ECC 5.0.
We want to Convert BAPI to webservice and generate WSDL but we are not getting an option for to create webservice in BAPI=> Tools(after selecting any one of BAPI) tcode in ECC 5.0/6.0.
We have followed the link:http://wiki.open-esb.java.net/Wiki.jsp?page=BAPIWEBSERVICE
1. Do we need to perform any config change to get the Create webservice option in BAPI=> Tools(after selecting any one of BAPI) ?
2. What are the ways to Convert BAPI to webservice and generate WSDL ? Please provide us.
Your help is appricated.
Thanks
Ramesh

go to SE37 to generate web service

Create trigger and use "nextval" to get next sequence nbr

Hi i created a table and a primary key for that table as follows:
create table PROD_TRNSLTN
PROD_PK VARCHAR2(16),
CNTRC_CD VARCHAR2(10),
PROD VARCHAR2(10),
PLN VARCHAR2(10)
alter table PROD_TRNSLTN
add constraint PROD_TRNSLN_PK primary key (PROD_PK);
i then created a trigger to automatically populate the primary key
create trigger PROD_TRNSLTN_TRGR
before insert on PROD_TRNSLTN
for each row
begin
Select PROD_PK.nextval into :new.PROD_PK from dual;
end;
i get no syntax error, but when i use SQLLoader to insert rows into this table i get:
"ORA-04098: trigger 'IAVE.PROD_TRNSLTN_TRGR' is invalid and failed re-validation"
Why??
Edited by: aft5425 on Oct 30, 2008 11:37 AM

Hi,
So you can compile via your editor? It sounds handy, but if it doesn't show error messages, and it doesn't allow you to indent your code, it's not worth it.
Save your code (as prod_trnsltn_trgr.sql):
create trigger    PROD_TRNSLTN_TRGR
before insert on PROD_TRNSLTN
for each row
begin
    Select PROD_PK.nextval
    into    :new.PROD_PK
    from    dual;
end;
SHOW ERRORSThe open SQL*Plus in a separate window and say
SQL> @full_path\prod_trnsltn_trgrIf you can't fix the problem, post your code and all messages you get in SQL*Plus.

Mapping validates and generates ok but get pl/sql warn in deploy

Similar Messages

Maybe you are looking for