Mapping windows 7 to the Xserve

I have an quad core 2.26GHZ xserve and my issue is this:
When Windows 7 Pro machines map to a share on the server any folder they try to access times out for about 15sec to 1min but will eventually open the folder and let the user access the files within. I think part of the reason is that both the machine and the server are on different networks. The server is in 192.168.x and all the PC's are on the 10.0.0.x network. I do have a listing on our DNS server that points to the apple server. but other then having that listing in the DNS I am not sure where to start troubleshooting.. This does affect all machines, BTW. If I put the xserve on the 10.0.0.x network everything connect fine..
Thanks all
The server is running 10.6.8

You can sync contacts via the Info tab when connected to your computer's iTunes. From the iPad manual :
You can sync contacts with applications such as Mac OS X Address Book, Yahoo! Address Book, and Google Contacts on a Mac, or with Yahoo! Address Book, Google Contacts, Windows Address Book (Microsoft Outlook Express), Windows Vista Contacts, or Microsoft Outlook 2003, 2007, or 2010 on a PC. (On a Mac, you can sync contacts with multiple applications. On a PC, you can sync contacts with only one application at a time.)

Similar Messages

Way to allow students to connect to their infomation on the Xserve from a windows machine

My previous experience working with servers was a win2000 server. I have changed schools and they are running a 10.5.8 xserve to control the user accounts. I would like to know if there is a method to allow the students to use the Windows XP machines in our library, so if they log in to those machines they can access their accounts on the Xserve. We have an old Windows server, but the accounts have been limited since it is filled. The reason I ask, because our school is 1:1 in the HS, but in the Jr. High teachers can check out carts, and a lot of work gets done there, but if a student is in our Library and using one of the XP machines, they can't save back to their main profile. I did notice a Windows tab on the workgroup manager where it shows the profile and the path. Didn't know if this was where could be set up. Any help would be appreciated.

You will need to allow both GRE and TCP 1723, most probably TCP would work if you are already inspecting all TCP Traffic, however, for GRE you will need to creat a seperate class and ACL (permit gre destination>) and set action for that as pass in both driections (in out and out in) make sure that this class is the top most class in the policy map applied under each zone pair.
Here is an example you may find usefull:
http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080ab7073.shtml

Some '???' appeared in the LOV Column Mapping window ...only

Hi,
I installed the Forms6i with the patch 12 on Windows XP platform. The installation language is Greek. The only problem i have faced up with the installation is the appearance of some question marks in LOV Column Mapping window ... instead of the Greek translation of the phrases:
Column Names ,
Return Item ,
Display Width ,
Column Title
Is there a specific Windows font that should be installed ....or something else...????
Thanks,,,,
Sim

You have to do it from the source code. Click on source, you will find "<xsl:if test="">".
Define your condition in test="/tns:input1=/tns:input2" or check if you source string contains "abcd", i.e. xsl:if test="contain(/tns:source_column1,'abcd')"
hope this will help

Can't map network drive (1204) The specified network provider name is invalid, Windows 8.1 Webdrive 10.2

I have just 'upgraded' from windows 8 to 8.1.
I use Webdrive 10.2 to map a drive to a secure ftp server.
Worked fine in Windows 8, does not work now I have upgraded.
When I try to initiate the connection from Webdrive I get a really helpful message...
"Can't map network drive (1204) The specified network provider name is invalid"
I cannot see where I can downgrade back to Windows 8 from 8.1.
Any solutions anyone?
Thanks.

Thanks for your efforts.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Firefox menus and text have disappeared. Also, can I map Windows key?

I was using openbox for a while (couple of days) and then decided to switch to KDE. The switch went well and was pretty effortless. I opened Firefox and it still had that ugly "Raleigh" theme to it. Wanting it to look more like the rest of KDE, I checked out the wiki and found this: https://wiki.archlinux.org/index.php/KD … plications
Upon following the following instructions to install and change themes to oxygen-gtk, my Firefox has no more text on it, basically (screencap below):
pacman -S oxygen-gtk
pacman -S gtk-kde4
gtk-kde4 ("System Settings > Lost and Found > GTK style")
Here's what firefox looks like: http://i52.tinypic.com/2r6cxdw.jpg
Interestingly enough, Konquerer wouldn't upload my pic for me (it crashed each time I tried), so I installed Chromium to upload it instead. It won't even start, but maybe the terminal output from running the "chromium" command may have something useful in it? It's missing some gtk-related items, but I don't know what they are nor how to fix the problem.
chromium
/usr/share/themes/qt4/gtk-2.0/gtkrc:335: Unable to locate image file in pixmap_path: "Expander/expander-normal-c.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:337: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:344: Unable to locate image file in pixmap_path: "Expander/expander-prelight-c.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:346: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:353: Unable to locate image file in pixmap_path: "Expander/expander-active-c.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:355: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:362: Unable to locate image file in pixmap_path: "Expander/expander-insens-c.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:364: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:372: Unable to locate image file in pixmap_path: "Expander/expander-normal-sc.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:374: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:381: Unable to locate image file in pixmap_path: "Expander/expander-prelight-sc.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:383: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:390: Unable to locate image file in pixmap_path: "Expander/expander-active-sc.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:392: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:409: Unable to locate image file in pixmap_path: "Expander/expander-normal-se.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:411: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:418: Unable to locate image file in pixmap_path: "Expander/expander-prelight-se.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:420: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:427: Unable to locate image file in pixmap_path: "Expander/expander-active-se.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:429: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:446: Unable to locate image file in pixmap_path: "Expander/expander-normal-e.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:448: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:455: Unable to locate image file in pixmap_path: "Expander/expander-prelight-e.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:457: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:464: Unable to locate image file in pixmap_path: "Expander/expander-active-e.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:466: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:473: Unable to locate image file in pixmap_path: "Expander/expander-insens-e.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:475: Background image options specified without filename
/usr/share/themes/qt4/gtk-2.0/gtkrc:935: Unable to locate image file in pixmap_path: "Shadows/text-entry-focused.png"
/usr/share/themes/qt4/gtk-2.0/gtkrc:938: Background image options specified without filename
[2895:2895:3655934306:ERROR:browser_main.cc(970)] Gtk: Default font does not have a family set
[2895:2895:3655934421:ERROR:browser_main.cc(970)] Gtk: Default font does not have a positive size
[2895:2895:3655941441:ERROR:browser_main.cc(970)] Gtk: Default font does not have a family set
[2895:2895:3655941497:ERROR:browser_main.cc(970)] Gtk: Default font does not have a positive size
[2895:2895:3655941528:ERROR:browser_main.cc(970)] Gtk: Default font does not have a family set
[2895:2895:3655941564:ERROR:browser_main.cc(970)] Gtk: Default font does not have a positive size
[2895:2895:3655944151:ERROR:browser_main.cc(970)] Gtk: Default font does not have a family set
[2895:2895:3655944200:ERROR:browser_main.cc(970)] Gtk: Default font does not have a positive size
[2895:2895:3655944229:ERROR:browser_main.cc(970)] Gtk: Default font does not have a family set
[2895:2895:3655944251:ERROR:browser_main.cc(970)] Gtk: Default font does not have a positive size
Segmentation fault
As for the other part of my topic, can I map my windows key to the start menu? If so, how? Thanks.

blackplague1347 wrote:As for the other part of my topic, can I map my windows key to the start menu? If so, how? Thanks.
As far as I know, KDE only allows the logo/mod4 key as a modifier in its keybindings. So you could do something like Mod4+Space, but not just Mod4.

After adding seperate performance collections to MAP 9.1 database, the database has become corrupted

Hi,
I have installed MAP 9.1(9.1.265.0) on my notebook, with Windows 7 Enterprise. The inventory of our environment was successfull and I have successfully added some performance collections to the database.
First I ran the performance collection for one hour, then added a performance collection of one week. this was okay.
Then I waited one week and added another collection of about five days. That collection would not stop: It was scheduled to run between 2014-07-28 12:49:31 until 2014-08-01 05:00:04. But it was still running at 2014-08-01 05:30:25. I waited for a little
bit longer, but the collection kept on running according to the status screen.
So I cancelled out of the collection at 2014-08-01 05:45. In the performance data it said that the colection ran from Jul 14 2014 08:04 AM until Aug 1 2014 4:57AM. So that looked okay.
But now, when I try to Get the performance metrics data from MAP, it states that I have to do a "Refressh Assessment", because I problably have cancelled out of a collection. This "Refresh Assessment" wil run for about an hour and than
completes with a message "Failed"
I get these errors in the MapToolkit.log
<2014-08-05 05:14:51.09
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[ClearPerfdata]] : 125 ms
<2014-08-05 05:14:56.13
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateTimeIntervals]] : 5039 ms
<2014-08-05 05:22:47.76
AssessInventoryWorker@StoredProcAssessment,I> RunAssessment() - [Perf] [[Perf_Assessment].[CreateMetricsPerTimeInterval]] : 471591 ms
<2014-08-05 05:52:54.66
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught InvalidOperationException trying to roll back the transaction: This SqlTransaction has completed; it is no longer usable.
<2014-08-05 05:52:54.79
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:15.86
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 3 more time(s). Retrying in 5000 milliseconds.
<2014-08-05 05:53:20.99
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 05:53:45.00
AssessInventoryWorker@DataAccessCore,W> OpenConnection() - Caught a SqlException trying to connect to the database. Will retry connection 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 06:24:03.69
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 2 more time(s). Retrying in 10000 milliseconds.
<2014-08-05 06:54:13.91
AssessInventoryWorker@DataAccessCore,W> DoWorkInTransaction<T>() - Caught a SQL transaction timeout exception. Will retry 1 more time(s). Retrying in 15000 milliseconds.
<2014-08-05 07:24:28.99 AssessInventoryWorker@Analyzer,E> RunAssessments() - Assessment threw an exception:
<2014-08-05 07:24:29.03
AssessInventoryWorker@AssessInventoryWorker,I> AssessmentCompletedEventHandler: Assessment completed event.
<2014-08-05 07:24:29.09
AssessInventoryWorker@TaskProcessor,I> WorkerCompleted: Worker: 'AssessInventoryWorker'
<2014-08-05 07:24:29.15 TID-16@TaskProcessor,I> Run: Completed. Status: Failed
Is there maybe a restriction to the intervalls of adding performance collection data, or is there something else I am doing wrong?
(I made a backup of the database after the first week of performance data, that database is still usable, so I can try to add more performance collections to that version of the database)
I hope someone has an idea what is going on.
Thanks!

Time between isn't the problem. If you look in the log file, SQL is timing out. I think the problem is machine resources and time related. After the performance data collection has run for the predefined amount of time, MAP has SQL execute various assessments
on the data to aggregate the raw data into something MAP can use. The more raw data that exists, the longer SQL will take and the more CPU and memory resources SQL will need.
I would recommend that you have at least 4 cores or vCPU's and 6-8 GB of memory dedicated to the machine on which MAP is running. I would also follow the directions in this Wiki article to increase the timeout in MAP so that MAP will give SQL the time it
needs to complete the job.
http://social.technet.microsoft.com/wiki/contents/articles/10397.map-toolkit-increasing-the-sql-database-timeout-value.aspx
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003

I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.

I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks.

Running Windows 2003 Server on Xserve Intel with BootCamp?

Well...
This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

Schuckert-
Greetings.
Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
Although I will say that I suppose a client will eventually pose the question to me (:>)
Luck-
-DaddyPaycheck

Native WIndows or Linux on XServer Hardware

Does anyone know if I can run Windows or Linux on the XServe natively without Leopard?
-Thanks

Hello Test Bed Fred, and welcome to the AppleBoards,
Assuming you are asking about Intel based current or recent Xserves you can run Windows using virtualization like Parallels Server BME, but you can't simply install it on the machine. You can also install and run a number of *nix flavors virtualized if you want to do that.
I'm sure there are *nix installs that can be run directly on the metal - the EFI boot is the only real technical hurdle that needs to be overcome. All that being said unless the machines are free I wouldn't generally choose to do this because you're paying Apple for software you won't use to get the hardware, but you can do whatever you want.
HTH,
=Tod

Mapping Windows API to Java - JNA

I am trying to use JNA to implement the functions in the Win32 USB API (http://www2.hawaii.edu/~hermany/api.htm)
I am trying to figure out how to map the following "HDEVINFO" which is defined as "typedef PVOID", which in turn is defined as typedef void* PVOID; (http://msdn2.microsoft.com/en-us/library/bb401729.aspx)
===================================================================================
     * From the API provided by Microsoft (http://msdn2.microsoft.com/en-us/library/ms792959.aspx)
     * HDEVINFO
     * SetupDiGetClassDevs(
     * IN LPGUID ClassGuid, OPTIONAL
     * IN PCTSTR Enumerator, OPTIONAL
     * IN HWND hwndParent, OPTIONAL
     * IN DWORD Flags
http://www.alanmacek.com/usb/DDKFiles/setupapi.h
typedef PVOID HDEVINFO;
====================================================================================
HDEVINFO is supposed to be an array of structures for the device information set. How do I map HDEVINFO on to the Java class that mirrors the SetupDiGetClassDevs function in the API?

Well I am using JNA (jna.jar) to make the call to the function available in the setupapi.dll. In the following code: Setupapi INSTANCE = (Setupapi) Native.loadLibrary("setupapi", Setupapi.class);*, this is what is being done. I am new to using JNA. Also, It would be great to have a resource that lists all the available functions for a Windows DLL. MSDN, of course is a good resource but it does not provide search results for a dll. One has to know the function to be called.
public interface Setupapi extends StdCallLibrary {
      * Allocating an instance of the native library using the Native.loadLibrary(Class) method,
      * providing the native library interface
      * This instance is for convenient reuse. Alternatively, we can load the library into a
      * local variable so that it will be available for garbage collection when it goes out of scope
     Setupapi INSTANCE = (Setupapi) Native.loadLibrary("setupapi", Setupapi.class);
      * Declaring native structures to pass to native functions.
      * To do this, create a class that extends Structure (https://jna.dev.java.net/javadoc/com/sun/jna/Structure.html)
      * and add public fields
      * (which may include arrays or nested structures).
      * Declaring methods that mirror the functions in the target library by defining Java methods with
      * the same name and argument types as the native function
      * (refer to the basic mappings (https://jna.dev.java.net/#mapping) or the
      * detailed table of type mappings (https://jna.dev.java.net/javadoc/overview-summary.html#marshalling) ).
      * From the API provided by Microsoft (http://msdn2.microsoft.com/en-us/library/ms792959.aspx)
      * HDEVINFO
      * SetupDiGetClassDevs(
      * IN LPGUID ClassGuid, OPTIONAL
      * IN PCTSTR Enumerator, OPTIONAL
      * IN HWND hwndParent, OPTIONAL
      * IN DWORD Flags
      // TODO: public HDEVINFO SetupDiGetClassDevs(
}

Java Code to List All Active Windows Process in the System

hi
i need to help to resolve the below given points:
1. Mapping Windows Process with their application names.
2. Owner of the Process
3. Process Start time and end time.
Thanks
Pruthvi.

This is actually not a java question but:
the windows command to get the processes:
WMIC PROCESSWhen you invoke the process store the details in a collection along with the system time.
Do the above a number of times per second and when a process disapears you know it has ended.
to calculate an aprox duration of process life cycle:
Duration = endTime - startTimeDetail List:
Caption
CommandLine
CreationClassName
CreationDate
CSCreationClassName
CSName
Description
ExecutablePath
ExecutionState
Handle
HandleCount
InstallDate
KernelModeTime
MaximumWorkingSetSize
MinimumWorkingSetSize
Name
OSCreationClassName
OSName
OtherOperationCount
OtherTransferCount
PageFaults
PageFileUsage
ParentProcessId
PeakPageFileUsage
PeakVirtualSize
PeakWorkingSetSize
Priority
PrivatePageCount
ProcessId
QuotaNonPagedPoolUsage
QuotaPagedPoolUsage
QuotaPeakNonPagedPoolUsage
QuotaPeakPagedPoolUsage
ReadOperationCount
ReadTransferCount
SessionId
Status
TerminationDate
ThreadCount
UserModeTime
VirtualSize
WindowsVersion
WorkingSetSize
WriteOperationCount
WriteTransferCount

10.4.7 networking problem - corrupt files when we save on the Xserve

I have upgrade 15 macs on my network from 10.3.9/10.4.4 to 10.4.7 - the Xserve was upgraded in 10.4.7 before. Now I have a lot of networks problems. When we save big files (quark Xpress 7, adobe illustrator CS, adobe photoshop), sometimes we lost our job, and we can't open the files (incorrect file format, postcript error in the illustrator file, lines in picture files...)
Sometimes, we can't import PDF in quark files, but, if we copy pdf files from the server to the desktop, xpress accept to import the pdf.
We also noted problems of refresh of the windows in the finder.
The Quark technical support is certain that the problem comes from the update 10.4.7 on the desktop computers, and suggest to wait until the 10.4.8 or to downgrad to 10.4.6.
Have you some infos about theses problems?
Thanks for you infos

Chatted with Apple re above. The guy was very patient and as helpful as he could be. Here's what he suggested:
At Terminal type:
sudo mdutil -s (drag the volume to here which enters the path)
You will be asked for your administrator password; enter this and press enter.
This commands returns the status of Indexing - namely my machine returned the following message-
Status: Indexing Disabled
Next I typed in:
sudo mdutil -i on (drag the volume to here which enters the path)
Press Enter
The following message is displayed:
Indexing enabled for volume.
Since then the machine has been very active (fans and disk lights) which I hope is it indexing the volume.
Spotlight works when the specific folder is selected but not across the whole volume. Sherlock still does not find any files. I remain positive, knowing that indexing takes plenty of time.
Thanks Apple Support for help

Mapped windows drive - Java performance problem

I have a mapped windows drive to which I am writing files sized from few kbs to GBs, Now I am facing performance problem.
Time for writing to local drive file with 4 MB - 1.6 seconds.
Time for writing to mapped drive : 31 seconds.
Please give me the ways to improve the mapped drive file access.
Note I am using buffered streams and all , I am primarly expecting some thing from windows side.
Renjith.

I am copying the file from local drive to a mapped drive.
ovxFileName = filename.substring(attachmentsFolder.length() + 1);
               BufferedInputStream reader = new BufferedInputStream(
                         new FileInputStream(filename));
               BufferedOutputStream writer = new BufferedOutputStream(
                         new FileOutputStream(commonLocationForOVX + File.separator
                                   + ovxFileName));
               String str = "";
               TimerUtility timer = new TimerUtility();
               timer.startTimer();
               int val = 0;
               while ((val = reader.read()) != -1) {
                    writer.write(val);
               writer.close();
               reader.close();
               timer.stopTimer();

'MAPI Session Handle' of the NGW 'Object Request Broker' could not be accessed (0x80004005) on attempt to get an address book

Hi!
When I try to access GW address book by calling
DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or even
DIGWMessage::Send, I'm getting messagebox with title "Address Book Error"
and message: "The 'MAPI Session Handle' of the Novell GroupWise 'Object
Request Broker' could not be accesses. The address book cannot run (error:
status: 0x80004005)."
I'm using .NET and I only get this error when I create a console
application. With windows application everything goes fine.
I've tried reinstalling GW client, running fixmapi utility, installing
different versions of MAPI CDO, but still got this problem.
Any ideas?

In the Application object.
>>> On Monday, July 26, 2010 at 4:16 PM,
shutchinson<[email protected]> wrote:
> Where would we set this?
>
> Thanks!
>
> Scott
>
> Preston Stephenson;1755943 Wrote:
>> Do you need to use the MAPI address book providers?
>> Can you use MultiLogin and set MultiLoginAddressBookSupport = TRUE?
>>
>> Preston
>>
>> >>> On Tuesday, November 11, 2008 at 4:22 AM, Vladimir
>> Iofik<[email protected]>
>> wrote:
>> > Hi!
>> > When I try to access GW address book by calling
>> > DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or
>> even
>>
>> > DIGWMessage::Send, I'm getting messagebox with title "Address Book
>> Error"
>>
>> > and message: "The 'MAPI Session Handle' of the Novell GroupWise
>> 'Object
>> > Request Broker' could not be accesses. The address book cannot run
>> (error:
>>
>> > status: 0x80004005)."
>> > I'm using .NET and I only get this error when I create a console
>> > application. With windows application everything goes fine.
>> > I've tried reinstalling GW client, running fixmapi utility,
>> installing
>> > different versions of MAPI CDO, but still got this problem.
>> >
>> > Any ideas?

Sending TOO many jobs to the Xserve

I am writing an algorithm to for a Monte Carlo simulation that will be run on Xgrid. We bought an Xserve for this reason. We are contracted with the government, so i need to document a list of possible errors or crashes that could occur.
My main question is , what happens if you overload the xserve with too many jobs, and what is the ramifications? For example, does it crash/restart losing the jobs, and/or will it do physical harm to the Xserve. Also if anyone has any relatively normal errors they run into, can you please respond describing them to me and any known fixes.
Thanks!
Keenan

It will act pretty much the same way any other *nix system will when you start loading it heavily. It will slowdown and start to swap furiously once the ram/cpu resources get exhausted by the jobs -it could exhaust the available free disk space for the swap file if you had a small HD, not likely though. It could become unresponsive at the console -can't login or it won't get to the Finder once the login window disappears. It could KP with bad code that might scribble in the OS address space or the address space of other jobs. It may become unresponsive on the network -that would be a sign that it's overloaded job-wise. You probably won't do any physical harm to the hardware unless it starts to run the cpu temps way up for a long, long, time -then you'd have to have the fans die.

Mapping windows 7 to the Xserve

Similar Messages

Maybe you are looking for