Mapping with backend

Hi,
Can any one send me the details on tcode "BBP_UPDATE_MAPPING".
So can u explain , what inputs we have to gve to different scenarios.
Regards,
RAghu.

Hi Raghu,
Let me explain to you the transaction precisely:
The Transaction has two screens, one on the top and the other at the bottom:
<b>Top Screen: Adjust Backend Reference:</b>
In multiple back-end scenarios, transaction BBP_UPDATE_MAPPING can be very useful because vendors that once have been replicated do not need to be replicated again from other back ends if their numbers are equal (top area). This transaction essentially will adjust those different numbers as one single number in the SRM system.
Example: You have 4 backends A, B, C and D and Vendor "Circuit City" has numbers as follows:
A- 100
B - 200
C - 300
D - 400
Now that you have already replicated circuit city from A (100) -> SRM, you dont want to overlap the same vendor with different vendor numbers. So, this transaction in the top area gives the ability to adjust the mapping of the local (SRM) vendor number to other vendor numbers in other backends.
The input parameter on the top area will be the logical system of the corresponsing backedn system for which you wish to perform an adjustment. Once you do this, SRM vendor number will have one to many mapping created. (i.e. Vendor Number 100 in SRM is same as Vendor Number 100, 200, 300 and 400 in backend A, B, C and D)
<b>Add/Delete/Change Backend (Bottom Area)</b>
The Bottom Area assists if a back-end has been replaced (for example, from test to productive), this can be switched very easily from this transaction (bottom area). In this area you can add, delete and change backends.
Hope this info helps !!
Pls assign points for usefull answers !!
Sundeep

Similar Messages

Issue in Color Theme on the map with ADF geographic components

I am facing an issue in bringing up a map using color theme .I can able to bring up a map with color themes using geographic components feature in ADF.
The problem here is 'Edit Color Map Theme' dialog which lists Map Theme in five categories like continents,counties,countries,states_abbrev,states_names.
we had implemented map using Color Theme based on the states_abbrev and found it was working properly.
But after some days we found that the settings we made to work for the map no longer works and resulted in no color theme on the map being displayed on the page.
It was found that the states_names works properly instead of states_abbrev by that time.
But again after some days it didnt work with state_names and we revert back our code to follow state_abbrev so as to get the desired result.
Does somebody know where is the problem and how to approach this issue?

Quick Install is gone.
Database repair doesn't work.
Color coded categories is gone, and as you've discovered Theme colors are gone.
Print to Excel is gone.
Many desktop clients that worked with 4.2 do not work.
It won't work with legacy devces.
and others.... There are lots of complaints about 6.2 scattered around the forums. Personally, the HotSync manager keeps forgetting the connections I've set, and goes to default views.
You aren't missing much of anything, IMHO.
WyreNut
Post relates to: Centro (AT&T)
Message Edited by WyreNut on 02-20-2009 12:18 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Guide ep7.0 with backend R/3 4.7?

Hi, gurus:
where can i find ess configuration on ep7.0 with backend R/3 4.7?
in nw04 and nw04s, ep use JCo connects backend.
what connection type is used by r/34.7?
Thanks
Br,
Chrina

Hi Chrina,
If you look at the link below it states what SAP recomends your release should be for each business package:
https://www.sdn.sap.com/irj/sdn/contentportfolio
ESS 50.4 -> EP 5/6, R3 4.6C/4.7
ESS 60.2 -> EP 7, ERP 2004
ESS 1.0 -> EP 7, ERP 2005
I have implemented ESS 50.4 with EP7 and both R3 4.7 and ERP 2005. It can be done, but when I spoke to a contact from SAP they stated the landscape I was using was not recommend and there was no documentation availbale for the specific landscape. You have to use bits of documents from various guides.
Thanks,
Nick.

How to add a bing map with pins to a Siena Project

Hi
I just want to add a bing map with the current location and a few nice pins of some nice locations around me. Comming out of a Excel file. Potentially also draw some routing lines into the bing maps.
Any ideas how I can accomplish that goal?
Thank you in advance
wbr.
Joerg

yes you can (there is actaully one on the map, blue square)
The syntax is listed on
http://msdn.microsoft.com/en-us/library/ff701724.aspx
You will however have to build the correct string to included in the image source (which you can do in the source excel or in runtime in siena)
Concatenate is suitable to do that.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?pp=47.638197,-122.131378;;1&ms=350,500&key=KEYHERE
the PP indicates the pin actually and the bing map autocenters on that. You have several options listed on the webpage listed above. It's a question of the one fitting you best.
Please note that your bing key is yours so you need to hide it well enough.
Regards
StonyArc

Can i use WebApps to build a Google map with polygon territories instead of points (pins)?

I built a map with Google Maps Engine Pro - http://www.jmbcompanies.com/Services/Mitigation/map.
It showcases territories using a Google map polygon shape. I wrote custom KML to create it. However, with Google Maps Engine pro you cannot create custom hyperlinks. It will link a URL that you put in the data, but you cannot name it or target the parent window, so therefore it opens a new tab for each click to more details. I really want it to open the WebApp detail page for that item within the same window.
So, is there a way to use the BC integrated Google maps technology and show polygons instead of points on the map? I've used {module_webappsmap,20754,a} to place individual locations on a map, but what about territories or polygon areas?
I'm sure that I can create a WebApp to generate the KML for each placeholder. But how do I turn that into a map?
THANKS!!

You can not create a kml file in BC through webapps. Modules do not work in other file types and you do not have server code access to generate a file type of results.
You need to use the google API and do this yourself or you can just use this:
And embed it into a custom field. My Maps

How to lock a specific map with a password in FINDER?

I don't use a password on my mac because you have to fill it out the whole time for ridiculous reasons. But I have one map, with all my financial numbers and invoices, that I want to secure with a password.
How to do that?
I already tried some things but can't figure it out.
Thanks in advance!

not sure what you mean by a map here. if you use a blank admin password (a mistake IMO), pretty much your only option is to create an encrypted disk image using disk utility and put whatever you want protected inside. when the image is unmounted, the only way to mount it is by entering the password you set at the image creation time.

Error in scheduling a mapping with sqlloader ctl file

Hi everyone,
I have been trying to schedule a single mapping which generates sqlloader ctl file. but i get the error
ORA-20001: Begin. initialize complete. workspace set. l_job_audit_execution_id= 20545. ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found ORA-06512: at "USER7.PMAP_TLOG_JOB", line 180 ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found
but when i attach this mapping with a process flow it works fine. There is no error.
so my question is in OWB is it a must that we should attach the mapping which generates sqlloader ctl file to a process flow and then schedule it or can we schedule a single mapping which generates sqlloader ctl file and what should be the process to schedule a single mapping which generates sqlloader ctl file?
can anyone please help?
Thanks & Regards
Subhasree

Hi Nawneet,
Any suggestions?
can anybody else also help me in this error???
Regards
Subhasree

Runtime-Error after deploying a mapping with the generated script

For example a very easy scenario:
1. Create a table and a view in a DB-schema, witch ist registered as WB-target-schema with the following scripts:
create view v1(c1) as select 'a' c1 from dual;
create table t1(c1 varchar2(1));
2. Import the table and the view into a OWB-module
3. Create a mapping ‘m1’
4. Drag and drop view and table into the mapping
5. Draw an arrow from the view-column to the table-column
6. Save and close the mapping
7. Mark the mapping in the ‘Design Center’ and klick the ‘Generate’-Button
8. Save the generated script ‘M1.pls’ to file
9. Run the script in SQL*Plus, connected with the target-schema (without using the Control Center Manager)
=> very easy right now ;-)
10. Start the mapping with the following script will produce the following error
SQL> declare
2 v_status varchar2(100);
3 begin
4 m1.main(v_status);
5 end;
6 /
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OWB_OWN.WB_RT_MAPAUDIT_UTIL", line 1027
ORA-06512: at "SCOTT.M1", line 2048
ORA-06512: at line 4
If i delete or comment the four WB_RT_MAPAUDIT_UTIL-calls - it work´s fine!
But is this a good advise?
What exactly does the wrapped package ‘WB_RT_MAPAUDIT_UTIL do?
Thanks
jwehner

I just ran into the same problem myself. I used the same technique of saving the generated OWB script to file and then compiling it through sqlplus. When I used the "Deploy" option for the mapping, then the problem went away. So when OWB is deploying the code it seems to be setting something internally that doesn't get set when you simple compile the PL/SQL. I don't know of any workaround to this. I will need it eventually, since I don't want to use the UI to deploy to various test environments and production. Maybe the built-in scripting language is the way to go.

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

XSLT Mapping with Java Enhancement

Hi All
I am working on XSLT Mapping with Java Enhancement.
To do this scenario i have followed the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/frameset.htm
As per the above link I have created Source and Target Data Types , Message Types , Mesage Interfaces, XSLT Mapping (using the transaction XSLT_TOOL) and Interface Mapping part and configred a simple file to file scenario in the ID part.
Apart from this I have wirte the java code, compile the java code, create the jar file using .java and .class file and after creating the jar file import the .jar file in the imported archive of the IR..
when I am trying to execute the scenario I am getting the successful message in SXMB_MONI but the target file is having the payload as given below.
<?xml version ="1.0" encoding="UTF-8"?>
<name xmlns:javamap="java:com.company.group.MappingClass"/>
And as per the XSLT mapping the payload should be as below
<?xml version ="1.0" encoding="UTF-8"?>
<person>
<name>Rinku Gangwani</name>
</person>
I have also followed the following blog link but still i am getting the same issue
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
could you please tell me what can be the reason that i am getting the blank targt field values in the payload.
Thanks
Rinku Gangwani

Hi,
The Transaction code XSLT_TOOL for ABAP xslt mapping.But the Java Enhancement is used for normal xslt mapping which we created using Stylus Studio.You can not access the Java Enhancement in ABAP xslt mapping.
If you want to use Java Enhancement in xslt mapping then create a xslt mapping using Stylus Studio and save the file as .xsl and zip the .xsl and import to import archive.
Regards,
Prakasu.M
Edited by: prakasu on May 28, 2009 1:46 PM

XSLT Maps with Java enhancements - JCO_SYSTEM_FAILURE

Hi,
I have reviewed several postings regarding XSLT Maps with Java enhancements. I followed instructions and build a jar file and the XSLT document. I built one imported archive with the .jar and .xsl. For the class, The path get loaded properly.
However, I still have a problem when and execute the interface.
My xslt has the following information
<xsl:transform version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:ns="http://xyz.abc.sap.def.com"
    xmlns:javamap="java:xyz.Date_Time">
<xsl:param name="inputparam" />
    <xsl:template match="/">
        <test><xsl:value-of select="javamap:getDateValue($inputparam)"/></test>
    </xsl:template>
</xsl:transform>
In SXMB_Moni I get the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>Exception in method processFunction.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"SYSTEM FAILURE" during JCo call. Exception in method processFunction.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
If i remove the line
<test><xsl:value-of select="javamap:getDateValue($inputparam)"/></test>
The map ends successfuly.
Comments would be appreciated.
Regards,
Sergio

Stefan,
Find the class and method definition below. The method is static and it returns the string.
==========
package xyz;
import java.util.Map;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import java.util.*;
import java.text.*;
public class Date_Time {
    private static AbstractTrace trace = null;
    public static String getDateValue(Map inputparam)
            trace = (AbstractTrace)inputparam.get(
                     StreamTransformationConstants.MAPPING_TRACE );
            Date now1 = new Date();
            SimpleDateFormat formatter = new SimpleDateFormat ("yyyyMMd");
            String dateString = formatter.format(now1);
            return dateString;

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

How to use tile map with AS3?

I have a file that contains a bunch of isometric tiles that I need to make a map with, much like a sprite sheet but not for making animations. So using AS3, how can I divide that file into the different tiles, knowing the coordinates of each of them. Or can it be done automatically in Flash itself, so I can access each tile from AS3?
Furthermore I've been a programmer for a couple of decades but I am new to Flash. I know there are a ton of DisplayObjects like Bitmap, Sprite, Shape, MovieClip, Symbol etc. But which one would be better to use for that file? I need to access it from AS3 as described above, but I don't need it to react to mouse events, stretch or have children, just extract each tile and move it onto the stage with AS3.
It seems to be down to a choice between Bitmap and Shape, since they're both lightweight, but I couldn't find out what the advantages and disadvantages of them are, as there was no comparison between those two on Google, though between a lot of the other objects. And Symbol seems like an idea too, since when I googled this, I found a lot of pages saying that you should convert a Bitmap to a Symbol, but I never found out why.
Oh, and since I'm building an isometric map, all the tiles and all other graphics I'll be using, will be Bitmap and not Vector since I'm drawing the graphics in pixelart.

create one tile symbol (movieclip or sprite so you can use actionscript to reference tile properties - like its x and y) and arrange them (using code or by hand) into your map.
enable the cacheAsBitmap property of your map (that has some number of tile children).
assign the mouseEnabled property of the map to false and its mouseChildren property to false.

0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but value comes

HI All
I have problem with 0GR_VAL_PD kf in 0PUR_C01 cube. 0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but in report level, value is coming for purchase organisation,material group .
But GR value as at posting date (0GR_VAL_PD)value not coming for particular material group or purch. org. but some days before, values were coming for particular material group or purch. org..
so need your help.
Thanks n Regards,
Gaurav Sekhri
Edited by: gaurav sekhri on Aug 18, 2010 11:41 AM
Edited by: gaurav sekhri on Aug 18, 2010 11:43 AM

Hi Susan
Which datasource you are using at present. Normally 0PUR_C01 gets loaded from 2LIS_02_ITM and 2LIS_02_SCL. The keyfigure that you have mentioned will come from 2LIS_02_SCL with the code that you have written.
The code that you have written should work. Please check if the code is in the transformation from 2LIS_02_SCL.
Share the details on why do you think the solution didn't work.
Regards
Karthik

XSL mapping with Java enhancment PI 7.1 - Dynamic configuration

Scenario - IDOC -> File
XSL Mapping using dynamic configuration to set file name.
1. Ive included
xmlns:javamap="java:packageName.DynamicFunctionClass">
in the XSL header
2.Ive call this method javamap:transform($input, $output)
In the Java code.
1. Package = packageName
2. Class Name = DynamicFunctionClass
3. Class Compiles and I have uploaded into the ESR for a particular scenario. (source and class)
4. extends AbstractTransformation and implements the transform method.
public class DynamicFunctionClass extends AbstractTransformation{ .....
public void transform(TransformationInput arg0, TransformationOutput arg1) throws StreamTransformationException {
ISSUE -
Essentially it looks as though PI cannot see the class file or is not able to reference it. I have created a static method in the class as well to access and this does not work.
TRACE -
Resource not found META-INF/Services/javax.xml.parsers.SAXParserFactory Thrown:
com.sap.aii.ib.server.mapping.execution.MappingClassNotFoundException:

Ive stumbled across the fact that JDK 1.5 does not allow for Mapping with Java enchanment it is a feature only in SAPXMLTOOL kit, I shall tick the little box in the Operational mapping ...

Mapping with backend

Similar Messages

Maybe you are looking for