Mapping with out bpm
hi...guys
how we will do 1:n multi mapping with out using bpm , pls explain..
with regards,
Prasad.
Hi Prasad
Go thru the forums given below.. which will discuss the same...
1:N mapping without using BPM
Re: 1:N mapping without using BPM --> IDOC to multiple files
Cheers..
Vasu
<i>** Reward Points if found useful **</i>
Similar Messages
-
HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique. -
Multi Mapping with out BPM and Receiver Determination Condition
Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks. -
File to Web service (SOAP) to File scenario with out BPM in PI 7.1
Hi All,
I have scenario File to Web service (SOAP) to File scenario with out BPM.i am getting the below error:
1) Error MP: unexpected exception caught com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId
2) Error ROB: error during processing: com.sap.aii.af.lib.mp.processor.ModuleProcessorException: Processing Error
PI server is 7.1 with SP:8
I have configured the scenario like this
1) 2 File channels - Sender & Receiver ,1 RFC channel - Receiver. We need to note that, the additional Module parameters need to be added only for sender File channel
2) Created Sender Agreement
3)Created Receiver Determination
4)Created Interface Determination
5)Created Receiver Agreement
Regards,
RameshHi,
Thanks for your reply!!
My Scenario is File to SOAP to File.
Configred modules in Sender channal below:
Prcessing sequence:
Number Module Name Module Key
1.......... AF_Modules/RequestResponseBean.......1
2.......... CallSapAdapter..........................................2
3.......... AF_Modules/ResponseOnewayBean.......3
Module Configuration:
Module Key Parameter Name ParameterValue
1 passThrough true
3 receiverChannel receiverChannel name
3 receiverService receiverService name
please tell any more confiration requered.
Regards,
Ramesh -
Error in Sysn-Async with out bpm
Hi folks,
I have a scnario JDBC-PROXY-file..with out BPM.
File - RFC - File without a BPM - Possible from SP 19.
by using this blog
Now for this i used sync JDBC sender here it is repetely taking data from jdbc and it is not updating in the tables
when i see in the CC monitoring error is
Error occurred while sending message (GUID 2cc288ac-a012-44f8-018a-d5c3d7983e4e): com.sap.aii.af.service.cpa.impl.exception.CPAObjectKeyException: Value of key must not be null: ObjectId.
Now For this scnario i need to add any more modules in the Adapter configuration..
As i am not receiving any responce...in a file...
Thanks and Regards
VijayHello everyone!
I do not know if you already solved this issue.
I was facing the same problem and I've figured out that my CC (in Module screen) was set up with the wrong Parameter Value for the Parameter Name "receiverService".
That occured because I had changed my Service name when I moved my scenario to production.
Hope I could help!
Regards!! -
XI ALERTS with out BPM Are not working.
Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan -
IDOC Number from payload in Alerts with out BPM
Hi Everybody,
I need to send the IDOC Number as Alert for the user.
Is it possible to do with out BPM either by Alert Frame Work or CCMS?
Is there any alternative way to capture the Idoc number and display for the erroneous messages?
Helpful Answers will be rewarded points.
Thanks,
ZabiYes,
You can also do it via alerts.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly. or from UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
Br,
Madan Agrawal -
Jdbc to file synchronous with out bpm
hi masters,
can u explain me the step by step of jdbc to file scenireo...... with out bpm ... but it is synchronous...
thanks in advance,
jp.Hi,
very useful one's
try them
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Regards,
Vishal
Message was edited by:
vishal kharat -
IDoc Split with out BPM using SplitByValue at the LineItem Level
I have an Invoice idoc contains line item and identifier changes into groups, let's say A & B
Using Message Mapping, Will i be able to Split into 2 IDOCs and combine A into one IDOC and B into Another IDOC and send it across to ECC with out using BPM?
Btw the header is commom for both the IDOCs
Source
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>B</item2>
<item3>A</item3>
<item3>B</item4>
</item>
</lineitem>
</header>
Target
IDOC 1
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>A</item2>
</item>
</lineitem>
</header>
IDOC 2
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>B</item1>
<item2>B</item2>
</item>
</lineitem>
</header>
Any inputs are appreciatedI actually gave wrong information on the source structure, I am trying to execute scenario with the given examples, meanwhile any help is appreciated
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<No>20</No>
</Header>
<InvoiceItem>
<Line1>10</Line1>
<Line2>10</Line2>
<Amount>10</Amount>
<ActionIndicator>I</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>20</Line1>
<Line2>20</Line2>
<Amount>20</Amount>
<ActionIndicator>C</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>30</Line1>
<Line2>30</Line2>
<Amount>30</Amount>
<ActionIndicator>I</ActionIndicator>
</InvoiceItem>
<InvoiceItem>
<Line1>40</Line1>
<Line2>40</Line2>
<Amount>40</Amount>
<ActionIndicator>C</ActionIndicator>
</InvoiceItem>
Target 1
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<tNo>20</No>
<ActionIndicator>I</ActionIndicator>
</Header>
<InvoiceItem>
<Line1>10</Line1>
<Line2>10</Line2>
<Amount>10</Amount>
</InvoiceItem>
<InvoiceItem>
<Line1>30</Line1>
<Line2>30</Line2>
<Amount>30</Amount>
</InvoiceItem>
Target 2
<Header>
<Date>20100112</Date>
<Amount>10</Amount>
<tNo>20</No>
<ActionIndicator>I</ActionIndicator>
</Header>
<InvoiceItem>
<Line1>20</Line1>
<Line2>20</Line2>
<Amount>20</Amount>
</InvoiceItem>
<InvoiceItem>
<Line1>40</Line1>
<Line2>40</Line2>
<Amount>40</Amount>
</InvoiceItem>
I know the part of Splitting IDOC, which was executing correctly, with the external data type changes. Please advice -
Acknowledgement from receiver file Adapter with out BPM
Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevinfrom sap note 821267
6. Acknowledgements
* Q: Does the File Adapter support acknowledgements?
* A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM -
can we do File---> BAPI with out BPM
Which version of XI you are using??
XI 3.0 or PI 7.0?? and SP for it?
Reffer this File to RFC Scenario without BPM
FOr solution reffer this : File - RFC - File without a BPM - Possible from SP 19.
Thanks
Farooq. -
Hi All,
I have a HTTP to webservice scenario currently running in production , i.e .,
From the HTTP Application user sends a request to XI . XI makes a SOAP call and sends the request back to HTTP Application .
now I have a new requirement to write the SOAP request message to a JMS channel also.
Let me know how is it achievable with out using BPM .
Thanks and Regards,
KLKThanks for the replies , I have to clarify my question
Yes my requirement is to send the soap - response to JMS .
The above blog is File - RFC - File ( Asyn/sync) but my requirement is
HTTP - SOAP -- JMS (Syn/Asynch) .
The current scenario in production my o/b and i/b message interface are synchronus .
I need a i/b asynch interface reciepent for the SOAP response .
Let me know your thoughts
Thanks
KLK -
SOAP to IDOC with or with out BPM
Hello All,
I am doing a SOAP to IDOC scenario for which I want to know if I need to create anything in SLD(like products, software components etc). Also can any one brief me on what all steps I need to do in SLD, IR, & ID.
For this scenario do I need to use BPM or not. And do I need to use 'with party' or 'with out party' to create a business service.
I need this urgently so can anyone throw some light on this.
Regards,
NeelimaHi ,
Posting IDOCS in SAP application system follwing are the steps you have to take.
Steps (for idoc reciever part)
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
In Transaction SALE
Define and Assign the logical system name.
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
For SOAP sender part :
You have to import ...WSDL as external defintion ...in repository ..
you have to select appropriate actions for ...request and response. -
File-RFC Syncronous interface with out BPM
Hi experts,
i have a scenario syncrhonous: file to rfc and get back response rfc to other file. I have 3 communication channel: 1 sender file, 1 receiver file, 1 receiver RFC, sender aggrement, receiver aggrement, interface determination and receiver determination.
I also placed module parameters in the sender file CC as:
Processing sequence:
Module name Module type Module key
AF_Modules/RequestResponseBean Local Enterprise Bean 1
CallSapAdapter Local Enterprise Bean 2
AF_Modules/ResponseOnewayBean Local Enterprise Bean 3
Module configuration:
Modulekey parameter name parametervalue
1 passThrough true
3 receiverChannel <File receiver CC>
3 receiverService <Receiver service name>
File is processed and got response from RFC but I dont see any file in the required folder. I successful message in SXMB_MONI.
both FCCs in RWB is in green status.
Where would be the issue, any inputs.
Thanks
Rajeev.HI All,
For response back from RFC to File in SXMB_MONI i see the successful message and the pipe line steps are as follows:
Inbound Message (Central)
XML Validation inbound channel respose
Request Message Mapping
XML Validation outbound channel response
Thats it.. I can see request and respose message successful but I dont see the file on the file server.
I created
Service Interface wtih request and respose message types
RFC is imported it contains request and respose
Created two Message mapping
created one Operation mapping with request and response
Created File sender Communicaton channel, receiver communication channel, RFC receiver Communication channel
Sender Communciation channel(Best effort) is updated with receiver communciaiton channel paramters
Receiver determination
sender aggrement
receiver aggrement
inerface determination
AM I missing some thing?
I can see the payload as required in response message of RFC but unable to see the file on the file server.
Any inputs are appreciated.
Thanks
Rajeev -
Exception Handling (in Mapping) with out using BPM
Hello All,
We are on SP17. I have a simple flow involving XI
JMS -> XI (Message Mapping -> XSL Mapping) -> Mail
I would like to send an email if there is an exception in any of the mapping. But I <b>don't want to use a BPM</b> for this exception handling. How can I do it?
Thanks
AbinashHi Abinash,
yes you can! See these..
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
All the best!
cheers,
Prashanth
P.S Please mark helpful answers
Maybe you are looking for
-
How can i upgrade my mac os x 10.6.8 to snow leopard ?
How can i upgrade my mac os x 10.6.8 to snow leopard ?
-
Looking for quicker way to change duration of file
Hello! I work in a broadcast environment and we have just upgraded to Audition from CoolEdit. It was a much needed change and is much better, but there is one problem. When we are doing production, we are getting ads that come out to 29.2 or 28.3 sec
-
New songs and playlists won't sync to iPod since 8.0.2
I have an 80gb iPod classic. I have made numerous failed attempts to sync new songs and playlists since downloading this latest 8.0.2 version of iTunes. When I plug in my iPod it shows up in iTunes, when I sync it iTunes shows a progress bar, then it
-
PowerBuilder 12.5.2 EBF
Is there a location for the current EBF files? I'm running PM 12.5.2 Build 5583
-
Locking/Concurrency Options
The options described in the recent messages are pretty well-known.. The way I look at it, unless you use some sort of active locking/notification, you end up with one of two types of update: Last Write Wins - No last-minute checking at all for times