MapPoint Control 11 in Labview Container = Control could not be loaded

I am working with Labview 6.1 to create an application using a "Microsoft MapPoint Control 11.0" ActiveX component. When I first create a container for it, I can insert the component and it will load and operate correctly. However, after closing the vi and reopening it, the container says "Control could not be loaded", and I need to re-insert the object to get it to work each time. I will need to compile and run this at some point, so I need to fix this problem or ditch Labview now. I have tried reinstalling Labview runtime and the MapPoint Application, but this does not fix the problem. Working with MapPoint as an automation object (without a container) seems to work ok, but I need interactive control through the container. Any suggestions?

Ankita--
Yup. Tried that one, as a search of the NI site comes up with reinstall and register as the only solutions for "control could not be loaded" errors ... but it didn't make a difference for me...
Odd to think that it can run fine right after the control is loaded, but after save/close/reopen, it's not working... hmmm.
--Brent

Similar Messages

Website browser control could not be loaded in LabVIEW 8.5.1

Hi Everyone,
I am using LabVIEW 8.5.1......Recently i started facing problem with ActivX controls...When i place a web browser or month calender on the front panel..there is a message displayed in th middle of the control saying that "Control could not be loaded"....This even affecting the builds am making on this PC....
what could be going wrong!!!!!!! plz help me out.........
Regards
Anil
Anil Punnam
CLD
LV 2012, TestStand 4.2..........
Solved!
Go to Solution.

Hiiii....Naqqash
I mean to say that there wont be any physical equipment. I want to simulate that physical equipment in the labview i.e. virtually. In detail.... i have one
equipment for temperature process control with heat exchanger i have studied its characteristics and all........now i want to simulate r design that equipment
in labview. Which is nothing but like virtual instrument. I want to design virtual instrument r equipment............
Thank you........

ActiveX control "could not be loaded"

G'Day everyone,
I'm having a problem with my activeX controls (SHDocVw.IWebBrowser2 for example) - when I load and run a LabVIEW 6i VI with an ActiveX container on the front panel, I get an error 97 (Unknown System Error in Untitled.vi) out of its method node. If I load the same VI into LabVIEW 6.1, I get the same error, and the container has "Control could not be loaded" written in it. This isn't just limited to the web browser control, but others too. (they used to work a week or so ago, and I can't think of anything I've done to the system since then...) If anyone has any ideas on how to fix this, I'd really appreciate it!
cheers,
Christopher
Christopher G. Relf
[email protected]
Int'l Voicemail & F
ax: +61 2 8080 8132
Aust Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
thanks,
Christopher
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

[Axtive X in a panel] "control could not be loaded"

Hi I do an experiment in robot control. The setup is shown in the attached file.
The problem occurs at the client site, the panel is loaded through the web page except the two ActiveX objects."control could not be loaded" was appeared rather than the objects.
I searched the previous posts but I still unable to solve the problem at the client side.??
Should I download the SDK for the activeX object at the ???
Attachments:
ask labVIEW.docx ‏105 KB

Thank you for your reply
on the server side: the operating system is windows vista, while the client side use windows7.
Also i need to notify you that when I load the html on the server site the 2 activex are loaded in the panel ( but the axtivex responsible for transfere the camera video is still black, and no any images are displayed in this activex box.

Alarm & Event (AlertView.dll) control report Control could not be loaded error on LV Runtime

Hello, when I try to execute my application that use Alarm & Event control, the window show in red color the text: Control could not be loaded.
I have tried to manually copy the AlertView.dll on C:\Program Files\National Instruments\Shared and then register the control with:
regsvr32 C:\Program Files\National Instruments\Shared\AlertView.dll
but still the control is never on the screen.
When the window is invoked and the ActiveX is loading the system show several error message (unable to initialize ComponetWorks control ...) and then exit the the red color error message Control could not be loaded.
If I install the DSC everything works fine ...
Any idea?
Regards.
Marco Savegnago

Hi msave,
I'm not sure I've understood correctly your problem, but reading your post it seems that you want to execute your application that loads an ActiveX control without installing the DSC module.
I did some researches for you and what I found is that copying the alertview.dll (in your case) into the path: <drive:>\Program Files\National Instruments\Shared and register it into regsrv32, may not be sufficient.
National Instruments, suggests to install the DSC (and from your post it seems you can do it) in order to have correctly installed all the parts you need effectively (in fact, in your case when you install the DSC all seems to work properly).
I hope I've been of some help
carlo>

Transfer to new PC: The project could not be loaded, it may be damaged or contain outdated elements

The Problem
I have transferred a large and functioning Premiere Pro project to a more powerful PC but am unable to run it, stopped by the error message "The project could not be loaded, it may be damaged or contain outdated elements".
Facts
The new PC has a 6-core processor and a different hard drive configuration but the operating system on both is Windows 7 and both PCs host up-to-date Premiere Pro CS6 (as part of Adobe Production Premium). The PCs are networked and Premiere Pro on the old PC can successfully load and run the project file located on the new PC, proving that the transferred file is not damaged. Also, preceding versions of the same project generate the same error message when run on the new PC except, very oddly, for earlier versions saved on or before 28 June 2011, when the project was only a fifth of its current size; those versions load correctly. Contemporary notes show that the editing carried out that day was simple timeline editing, ie no After Effects etc (that came later), and the project has worked fine then and since.
So I don't have a damaged project file and don't know what "outdated elements" means.
Help
Any help solving this problem would be much appreciated.

Hi Vinay
As suggested I renamed the additional folder, created a new project, set 'Custom' editing mode, 'Microsoft AVI' as the preview format with 'Uncompressed' codec.
Unfortunately the results were similar to before: On importing the original project into the new project I was sequentially asked for the locations of various files, including After Effects .aep files. The final file location request, for an mp3 audio file, was followed by lots of conforming and indexing. During this process the 'Where is the file XXX.mp3? window stayed locked open. Eventually, with all conforming etc finished, this window was still open and locked. Clicking anywhere on the screen caused a 'ding' and another, smaller, box opened, listing three .aep files. This box asked no questions and gave no options for selecting a file location so, with the topmost file highlighted, I just clicked 'ok' and the box disappeared, leaving the 'Where is the file XXX.mp3?' box still open.
The importing process took about 30 minutes. I waited another 10 minutes, in case something was happening in the background, but with the Task Manager CPU usage value sitting on 0 or 1%, I used it to shut down the project.
For what it is worth, I created a simple new project on the old PC – just a few video clips and transitions in a single sequence (no After Effects etc). This project was then transferred to the new PC and it opened successfully.
Again I remain grateful to you for this and any more advice.
Best regards
Dave

Container for alert category could not be loaded

Hi All,
I am having very strange issue with container(Variables).
I defined Alert category, created container elements and I was using them in long and short text. They were working fine, but now if I open Alert category and click on container tab, its says: Container for alert category could not be loaded and I dont see container elements that I created before. Same thing happened before and I re-created those container variables. But now I have many Alert categories. Is this an existing issue? or does any body having similar situaltion? Can anybody please provide information on this.
Thank you,
Indrasena

Hi Moorthy,
Thanks for your quick reply . We are on WAS 6.40,SP16, but SAP note 656488 is released on 01.09.2003 for 620, it should have been implemented alreay. Do you think we still need to implement that???
Thank you,
Indrasena

THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS

I am trying to open a .prprj worked yesterday but I get this msg: THE PROJECT COULD NOT BE LOADED, IT MAY BE DAMAGE OR CONTAIN OUTDATED ELEMENTS
I tried to import it in a new project, import it in AE, open an aotosaved project (there are so old, not usefull)
I know that it can be edited in XML, but I don't understand anythig of that...
HOW DO I REPAR IT???
Any help???

Hi,
thanks for for the comment! In fact I did try this and I also tried to import a sequence only. I haven´t changed anything but I guess the automatic update of windows 8.1. has.
And then I noticed that I´m not at all alone with my problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
So the final solution seems not to be in my hands ;~)
Cheers,
Petri

LabVIEW error code3: Could not load front panel.

Hi
I am getting second time the "LabVIEW error code3: Could not load front panel." when working with the development environment of LabVIEW 2009 SP1.
It is really annoying as I loose time as I have to revert to saved previously code.
Does anybody know where it may be coming from and how to avoid it?
Thanks
Pawel
Solved!
Go to Solution.

Pawel,
the panel has an origin which you can see in your VI:
Every element will be placed in a position in regard to this origin:
The position has a limit in regard to the bound. I am not sure about the value, but it should be around -35k...35k (or the double of it)....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

CVS NI1454 Labview RT 8.2, NI-VISA probleme : "NI-VISA loads modules... At Least one passport on your system could not be loaded"

Bonjour,
Je cale sur un problème avec le système de vision NI-CVS 1454.
J'ai installé la version Labview 8.2 RT dessus car je n'avais les licences que pour cette version.
Dans mon programme, la caméra doit réagir sur des signaux digitaux pour effectuer une analyse 1 ou une autre (analyse 2).
Comme il me fallait connecter des I/O j'ai utilisé les fonction de NI-Imaq I/O > Open I/O.
La caméra ne sait rien faire avec cela car je dois installer des softwares sur le système.
J'ai donc été via Ni-MAX installer le soft NI-RIO FCF et cela demande automatiquement pour installer NI-VISA et NI-VISA SERVER
Mais lorsque cela est fait j'ai un message à chaque démarrage du CVS :
"NI-VISA loads modules(Passports) ro access GPIB, Serial, VXI, etc.... At Least one passport on your system could not be loaded. You should run the Measurement & Automation Explorer"
Je ne fais que cela depuis 2 h mais je ne trouve pas le problème..
est-ce la compatibilité des versions? Dois-je travailler autrement pour les I/O surle CVS?
Merci pour votre aide.
Seb

Bonjour,
Avez-vous essayé les tests proposés par Sami Fatallah ci-dessus ? Si oui quels en sont les résultats ?
En effet je pense qu'une réinstallation du CVS (en safe mode) serait judicieuse.
En ce qui concerne la configuration logiciel, tout semble correct.Vous n'avez donc en effet pas besoin du lien que je vous ai envoyé dans mon précédent message. Toutefois une réparation comme suggérée ci-dessus pourrait-être utile.
Pour ce qui est du fonctionnement de IMAQ I/O, il vous permet d'accéder aux entrées/sorties via le FPGA. Cependant cela est transparent pour vous car un bitfile est généré à l'installation. Vous n'avez donc pas besoin de LabVIEW FPGA ni de programmer le FPGA. Plus de détails ci-dessous :
http://digital.ni.com/public.nsf/allkb/98EE3EF87B2058F2862575BC005EDBC6
Quel type de caméra connectez-vous à votre CVS par ailleurs ?
http://forums.ni.com/t5/Machine-Vision/CVS-1456-Connection-Problems-VISA-error/m-p/1041051?requireLo...
Voici un lien utile pour le diagnostic et la résolution de problèmes sur les CVS en général. Il ne vous sera d'aucun utilité dans le cas précis, cependant je vous conseille de l'ajouter à vos favoris.
http://digital.ni.com/public.nsf/allkb/35D5C8DB4F1A66F5862571EA005D2FE3
N'hésitez pas à nous tenir informés de l'évolution de la situation.
Bien cordialement,
Yannick D.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

"PDE bundle could not be loaded," HP 7510 All-in-One, Mac OS X 10.9.5

The selection "PDE" in the print dialogue box is listed with a strikethrough.
Choosing PDE displays the message "This bundle could not be loaded because the required components could not be found. Contact the bundle's creator ... for the newest version. HP PDE 4.6.0."
Haven't been able to find HP PDE download.
Any help appreciated.

You need to download the full Mavericks installer from the AppStore. You need an Apple ID and you must claim the OS in your account. If you are already running 10.9.5 it will tell you so. Opt to download anyway. Inside the installer is the InstallESD.dmg.
However, this is an installer, not a "clone-able" image. If you are looking to make a clone, then boot from the Recovery partition and opt to reinstall the OS fresh. Or better yet, get an external drive and install Mavericks to the drive. Then add all your software and customizations that are not user or device specific. Once done, you can then capture a DMG can can be used to image other systems.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

0x80230729 (The extension could not be loaded.)

Hi,
I've been working on this most of the day without any luck. I'm wondering if anyone has seen something like this.
PCNS can successfully deliver the password change to an AD target, so PCNS should be OK.
The failure occurs when we add the Oracle EBS Web Service management agent to the password sync targets.
The error message indicates that the Microsoft.IdentityManagement.WebService.MA.dll cannot be loaded due to an incorrect .NET framework version.
An unexpected error has occurred during a password set operation.
"BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(322): 0x80230729 (The extension could not be loaded.)
ERR_: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(804): Please verify that the password extension dll can be located in the Extensions directory.
If the extension is present, confirm that the version of the .NET framework that can run the extension is installed on the server and that a supportedRuntimes entry in the configuration files specifies that version. The synchronization engine will not be able
to load an extension that is built with a newer version of the .NET framework than the version of the .NET runtime it is hosting.BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\core\passwordext.cpp(806): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2821): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\ma\extensible\export.cpp(2866): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\exportpassword.cpp(474): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(7961): 0x80230729 (The extension could not be loaded.)
BAIL: MMS(5080): d:\bt\9394412\private\source\miis\server\server\ma.cpp(8410): 0x80230729 (The extension could not be loaded.)
Forefront Identity Manager 4.1.2273.0"
I ran an Environment.Version command and it returns that we are using 4.0.30319.296.
In the dllhost.exe.config file, we have the settings:
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
<section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0.30319"></supportedRuntime>
<supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
<bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
So, I think it looks like it should be trying to run the dll under the 4.0.30319 framework. The documentation says that framework is required and we are running it.
The dll is in the Extensions folder.
Has anyone seen this before or something like it? Any ideas on where else I could check?
Thanks,
Sami

Thank you for your reply. I've tried running in and out of proc with the same error showing up.
I tried a few different modifications to the miiserver.exe.config (as well as Mmsscrpt.exe.config and the Dllhost.exe.config files). I tried changing 4.0.30319 to 4.0 as per this article:
http://msdn.microsoft.com/en-us/library/w4atty68.aspx
Even though we are only on FIM R2 (not on SP1), I tried a variation on the config file changes recommended here:
http://support.microsoft.com/kb/2772429 but I referenced the newVersion as 4.0.1.0.
Still no luck.
Here's the miiserver.exe.config file. Maybe you'll see something glaringly wrong? Thank you for your help!
<?xml version="1.0" encoding="UTF-16"?>
<configuration>
<configSections>
    <section name="resourceManagementClient" type="Microsoft.ResourceManagement.WebServices.Client.ResourceManagementClientSection, Microsoft.ResourceManagement"/>
    <section name="resourceManagementService" type="Microsoft.ResourceManagement.WebServices.ResourceManagementServiceSection, Microsoft.ResourceManagement.Service"/>
    <section name="resourceSynchronizationClient" type="MIIS.ManagementAgent.ResourceSynchronizationClientSection, mmsmafim"/>
</configSections>

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>

<resourceSynchronizationClient/>

    <system.diagnostics>
        <sources>
            <source name="ForefrontIdentityManager.ManagementAgent" switchValue="Warning">
                <listeners>
                    <add initializeData="ForefrontIdentityManager.ManagementAgent" type="System.Diagnostics.EventLogTraceListener, System, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089"
                         name="MAExceptionEventLogListener" traceOutputOptions="LogicalOperationStack, DateTime, Timestamp, Callstack">
                    <filter type="" />
                    </add>
                </listeners>
            </source>
            <source name="ForefrontIdentityManager.ManagementAgent.EventTracingForWindowsTraceSource" switchValue="Verbose">
                <listeners>
                    <add name="MAEventTracingForWindowsListener"
                         type="System.Diagnostics.Eventing.EventProviderTraceListener, System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
                         initializeData="{C4D0C1D4-909D-481b-B011-10E682A6009C}" />
                </listeners>
            </source>
        </sources>
    </system.diagnostics>
    
    
    

<startup useLegacyV2RuntimeActivationPolicy="true">
    <supportedRuntime version="v4.0.30319"></supportedRuntime>
    <supportedRuntime version="v2.0.50727"></supportedRuntime>
</startup>
<runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
      <dependentAssembly>
        <assemblyIdentity name="Microsoft.MetadirectoryServicesEx" publicKeyToken="31bf3856ad364e35" />
        <bindingRedirect oldVersion="3.3.0.0" newVersion="4.0.1.0" />
        <bindingRedirect oldVersion="4.0.0.0" newVersion="4.0.1.0" />
      </dependentAssembly>
    </assemblyBinding>
</runtime>
</configuration>

C:\SC\crviewer.dll could not be loaded

Moved application source code from laptop to new desktop. Crystal Reports XI SP2 is installed on new desktop. When I open VB6 project, I get message "c:\sc\crviewer.dll could not be loaded -- Continue loading projects?" This application worked on my laptop. I no longer have the laptop. Need help to resolve references. Other messages I get are: "Errors during load. Refer to c:\SC\frmViewReport.log for details." and "Errors occured during load." When I run the application, I get "Compiler error: Method or data member not found"
In frmViewReport.log I have the following line:
Line 66: Class CRVIEWERLibCtl.CRViewer of control crvReport was not a loaded control class.
Steps for Reconstruction
1. Open VB6
2. Select project to open
3. See error "c:\sc\crviewer.dll could not be loaded -- Continue
loading projects?"
Operating System: Windows XP

First will executables I create run on the end users computers?
- yes they will. But we need to be clear on what version of the runtime is the app using. CR 8.5, or CR XI? (more on that later)
Second, in Crystal Reports XI, do I even need to have crviewer.dll?
- absolutely - if you are using the RDC. There are two core components to the RDC; the craxdrt.dll and the crviewer.dll
Is there a different activeX control in Crystal Reports XI that replaces the need for crviewer.dll?
- no there is not
Third, why does the crviewer from Crystal Reports 8.5 solve the problem?
- most likely because there is a reference to that version of the viewer in the project. Go to Project menu, references and see what the projects is referencing.
Are the VB6 project references really the root cause.
- absolutely
Forth, is there some sort of problem that causes my application not to find the crviewer.dll in C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\ActiveXControls?
- yup. the CR XI components are not being referenced in the app. Again, go to Project, references. The two references for CR XI are; crystal ActiveX Report Viewer Library 11.0 and Crystal Reports ActiveX Designer Runtime Library 11.0. I'll bet my bottom dollar that these are not the referenced dlls...
Is the DLL not correctly registered?
- nothing to do with registering. I'm quite sure you'd be getting different errors.
Now, back to question 1. To determine the runtime your app is actually using, I recommend you use the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
Run, your app, then start modules, get a log created. Expand the "by process" node, select your app exe. Then go to the View menu and select Details. See what CR dlls are loading. I'm sure it will all be version 8.5
Ludek

The driver: sun.jdbc.odbc.JdbcOdbcDriver could not be loaded with jws

Hi,
When I execute my executable jar file, there is no problem but when I open my .jnlp with web start, I obtain my main frame but the queries don't work.
I have the error message below :
Java Web Start 1.2 Console, d�marr�e Fri Apr 25 14:55:59 CEST 2003
Environnement d'ex�cution Java 2 : version 1.3.1 par Sun Microsystems Inc.
See com.borland.dx.dataset.DataSetException error code: BASE+83
com.borland.dx.dataset.DataSetException: The driver: sun.jdbc.odbc.JdbcOdbcDriver could not be loaded. This could be a problem with the driver itself, or that the driver is not found on the classpath.
at com.borland.dx.dataset.DataSetException.a(Unknown Source)
at com.borland.dx.dataset.DataSetException.driverNotLoadedAtRuntime(Unknown Source)
Anyone can help me please?

Almost certainly, you need to include the JAR file that contains the class in question as a resource in your JNLP. My personal preference for this kind of thing is to have an entry that actually points to another JNLP for the driver (database, e-mail, whatever you need).
In general, the whole application has to be packaged so that JWS is aware of all the pieces (other than the JRE)--one other thing I've done in some cases is put the driver JAR's into the jre/lib/ext directory.
HTH,
J M Craig

MapPoint Control 11 in Labview Container = Control could not be loaded

Similar Messages

Maybe you are looking for