Maps 3.0 with E75 (new SW 125) A-GPS Problem

Hello,
I have yesterday updatet my E75 with nokia maps 3.0. It works fine but allways it takes a long time to fix GPS.
So I think A-GPS doesn´t work.
With maps 2.0 it takes 2-3 sec. to fix the GPS.
My E75 has the new firmware 110.48.125
Has anybody a idea?
Thanks
Scoty81

Well, not only that the Ovi Maps is slow. Here is a complete symptom list which I could think this far with latest updates.
First mistake was to click update maps downloader link.
1. Maps loader 3.0 seems to be incompatible with Maps 2.0 app on the phone.
2. Downloading Ovi Maps to phone should help, but now you either will get error that not enough memory on memory card (even that there is actually 7 gigabytes in my case)
3. or if you use bluetooth you will probably see error about connection been lost.
4. Downloading a new firmware does not help. Now however with latest firmware on phone you have gained a new "feature" with USB cable that it will crash your computer (in Vista or in XP. No difference). If you take USB connection as mass memory, your pc will start to recognize the phone over and over again. In one point it may stop. Somewhere between 20th and 120th accept click. But usually slower computers have crashed totally before this happens.
So, at the moment I have latest Maps downloader, latest Firmware, Latest Ovi Maps on my phone and yet still I cannot actually download any maps because of the list of symptons above. So using your mobile as gps abroad is now extremely expensive because all map data must be downloaded through GPRS.
Good thing about Maps 3.0 is that it is actually faster to load than the old Maps 2.0 app, but the connection time with satellites and positioning seems to be still extremely long. Usually I manage to find my way to a needed place before I actually get a positioning working.

Similar Messages

Exchange the iPhone with the new one because of hardware problem.

How can I complain for the problematic iPhone shape. I mean the shape of the iPhone is not fine. I asked the apple store in my country but they said they did not provide for exchanging new device. Please help, where can I exchange it with the new one?

Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

Problems with installing new itune, different from the problems described.

Ok, so this morning when I was trying to access itunes, it said "error, send error report" or something like that. I retried it several times, but it would not work. So I uninstalled it and installed the new version. Then, I when I was trying to download it, it said something is wrong with my "Windows Installer Package"...and it just skips installing itunes... Please help me, thank you.

Then, I when I was trying to download it, it said something is wrong with my "Windows Installer Package"...and it just skips installing itunes
instead of running the install on line, download and save a copy of the iTunes installer to your hard drive, and run the install from there.
if you still get the message then, could you post back with the precise text of the message?

My Atv2 is very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

I'm having the same issue. Ay fixes? Bought ATV today, music streams but videos don't and mirroring doesn't work either. Start mirror and severe lag then just drops. Been trying for couple hours. About ready to return it.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

What's with the new maps ???

Is it just me or is anyone else who has downloaded the latest OS6 for iPhone 4S massively disappointed with the new apple maps. Google maps had far better quality images. Will they improve to google maps quality. If not, I want google maps back ASAP !!! Is it just me ???

Bing Maps offers a very good maps service with Bird's Eye, a feature similar to Flyover. It's arguably better than Google Maps.
http://itunes.apple.com/us/app/bing/id345323231?mt=8
You can use Google Maps by creating a shortcut to the Home Screen with help from the article below.
http://www.ign.com/articles/2012/09/20/how-to-get-google-maps-on-ios-6
MapQuest also has a very nice app available.
http://itunes.apple.com/us/app/mapquest/id316126557?mt=8
Nokia Maps is another great service that you can add to your Home Screen via a web shortcut.
http://m.maps.nokia.com
If you would like to send a suggestion to Apple, please go to http://www.apple.com/feedback or you can Report a Problem via the Maps app by tapping the bottom right.

What is going on with the new update? It's a nightmare, poor wifi, facetime disconnects, maps are horrendous..are we guinea pigs and not product users anymore?

What is going on with the new update? It's a nightmare, poor wifi, facetime disconnects, maps are horrendous..are we guinea pigs and not product users anymore?

lll wrote: I think that this iOS was release a little bit to soon..
Yes, but they had to get the iPhone 5 into the channel, and iOS 6.notReadyYet was all they had.

Review of the iPhone 3G: Finding Bliss with my new iPhone 3G

☻☻☻☻☻☻☻☻☻☻
10/10 happy faces
I bought the new iPhone 3G a couple of weeks ago (the first Apple product I have owned), and I have to tell you--I LOVE IT! It is sheer "bliss". The phone is sleek and easy to hold. More importantly, it is super easy to use. Everything is activated by touch or a quick flick of your finger. And it's FUN! I've never had a "fun phone" before this.
I would recommend this phone to anyone, especially to those who have problems using the regular phone-style keypad to text. It is also the perfect phone to give to someone who may be "technically challenged" because once you comprehend how it works, it is easy to use.
Here are some of the things I like about the iPhone 3G:
Usefulness & User Friendly
In the past, my other cell phones have been used for the calendar, once in a blue moon for the game on it, but mostly as a phone--that's it. With my iPhone, I can:
-download my email contact list in Outlook (or others) so that I have all my contacts on my phone
-call friends just by touching their name in my contact list
-activate the speaker by one touch during any call
-access the internet and enlarge parts of any website or turn the iPhone horizontally for easier reading
-send out a Twitter post in seconds
-plan my schedule in the calendar (I actually use this more now)
-use Google Maps to help me navigate and GPS to see exactly where I am and what's around me (makes ordering pizza a breeze)
-download numerous applications, music, videos etc from iTunes, plus from my computer (did that all on day 1)
-take great pictures; it's a camera too--I can view them separately or as a slideshow
-download photos from my laptop or PC to my phone
-get a TV guide app that will show me what's on TV--great for when I'm traveling (only US for now but they promise Canadian compatibility is on the way)
-get a movie app that shows me what movies are on, where and when (even in Canada!)
-gives me a direct link to YouTube so I can watch clips (get the 6G or higher data package!)
-check the weather forecast for the week--anywhere (great for when traveling!)
-check our stocks (not a pretty picture right now!)
-set world clocks (great for traveling!)
-play numerous games that I can download from iTunes (many simulate the Wii experience)
-use as an iPod, complete with headphones and speaker so I can take calls while listening to music (much like having a bluetooth)
-send and receive email (easy to read and to type)
-easily send text messages*
-type notes and email them to myself so I can save on my PC**
*Texting
I could text on my last phone, but I hated using the tiny numerical keypad. I'm not a teenager that can rapidly fire off a whole paragraph in mere seconds. It took me forever to type a text message. So I rarely used that function.
With my new iPhone, texting is a breeze--and fun. It is made easy by the use of a simulated keyboard that pops up. Since I'm a writer, using a keyboard is second nature to me. The letters on the iPhone keyboard are quite large and easy to tap. When you tap a letter and hold for a second, the letter pops up enlarged, making it easier to read for those of us who have vision issues. I don't even need my reading glasses for this.
All text conversations are stored so you can flick back over a conversation that may have taken place over weeks. You can read both sides of the conversation in colored balloons. Or you can erase the conversation and start fresh.
**Notes
The notes application opens to a legal pad (yellow pad with lines). All you have to do is tap on a line to drop the cursor, then use the keyboard to type. With all typing on this phone, you can touch and hold and a magnifying bubble comes up, helping you to see the text more easily. This way you can move the cursor if you need to correct something. With the iPhone's smart technology, it'll offer you suggestions for words that you accept by tapping the space bar.
Finding Bliss
Two nights ago, I discovered just how much this note app will help me. I write novels--suspense mainly. Because my imagination is so active and is always "on", I am often blasted with an idea for a novel at the least convenient time. Sometimes while I'm driving, sometimes while I'm watching TV. In these cases, I scramble around for paper, write down my thoughts, then end up losing or misplacing the paper if I haven't entered the info on my computer.
Two nights ago this happened. I was watching TV and a commercial came on. It was for Bliss chocolates. First, it made me want chocolate (lol). But the more I looked at the word "Bliss" in its pretty scrolling font, the more I started to picture a young girl--named Bliss.
Then...BAM!
I was blasted with a story that made me sit up in my chair and reach for my iPhone. I couldn't let this idea or Bliss escape. I had to capture her story right away. So I made some notes. When I was done I had a very brief plot outline. I was extremely happy to see that I could email it to myself, which I did. Then I went on my PC, opened the email and copied the text into a new folder with the title of this new YA novel--Finding Bliss.
The following day I told my husband about my new novel idea and about Bliss and my iPhone note feature. While we sat in the mall, another piece of her story showed itself to me. So out came my iPhone, type-type-type send.
As my husband and I talked, he gave me a terrific idea. *I am going to write Finding Bliss on my iPhone!* A complete novel, using the notes feature. The iPhone will also be featured in my novel; someone will be using it. Marc suggested I contact Apple and let them know what I'm doing and how I'm using the new iPhone 3G. I think that's a great idea. They might get a kick out of the fact that a bestselling Canadian author is using her iPhone to write a novel.
I have already started Chapter 1 of Finding Bliss. My plan is to write it on the iPhone, then edit it on my PC.
As for Bliss chocolates, I bought a bag to celebrate. They're heavenly.
And my new novel? It will be a project of love.
Finding Bliss will be an emotional, heartwarming story of a teenager who must fight to survive a world of abuse, lies and loss. As she struggles to find herself, Bliss will discover exactly where she belongs and she'll learn that she is worthy of love after all.
~Cheryl Kaye Tardif,
bestselling author of Whale Song

Wow, what a great review. But that's expected from a writer. I had an HTC Touch but it had to be rebooted after 20 to 30 minutes of play. It got kinda boring. I cant put this iphone down.
You forgot to add you can do full sentences without abbreviating when texting or emailing. It's that easy!

My iMessage no longer works with the new is07 update how do I fix this

My iMessage and some of my applications no longer work with the new software update. How do I fix this?

I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
http://support.apple.com/kb/TS4268?viewlocale=en_US
I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
Hope this helps.

Port mapping not working with 7.5.1

I am having trouble getting Port mapping working with the new 7.5.1 firmware. Port mapping is not working. Port mapping was working fine before update, now all attempts to connect from WAN on ports are rejected. Tested with: telnet <wan-ip> <port>
I have removed and re-added all port mapping entries - no luck. Power cycled several times - no luck.
Other info:
I have an: Airport Extreme (Simultaneous Dual-Band II) running Version: 7.5.1.
It is setup to "Allow this network to be extended"
Network is being extended with an Airport Express with 802.11n running 7.4.2

yeah. I noticed the same thing. now the splash screen comes on without the flashing green squares and just hangs. i tried unintalling and then reinstalling and still no go. kind of annoying but they will probably come out with an update pretty soon

E75 110.48.125 + BH 703 = cannot establish bluetoo...

Hello. My E75 110.48.125 does not want to work with my beloved BH-703 headset. I had no problem with E65.
I can authorize both E75 and the headset but after a while my handy shows only "cannot establish bluetooth connection". I find it annoying, and at the same time I do not understand why BH-703 is a "dedicated accessory" to E75 (in line with nokia.com).
Any ideas?
PS. E75 bluetooth connection with my hp pavilion works fine.
Regards
barti
Message Edited by barti_g on 11-Nov-2009 06:58 PM

Hi barti_g,
it looks like you are sharing my experience very closely: same previous phone (E65), same problems with an explicitly declared compatible accessory. It's only that I am experiencing the problem with a 5730 XpressMusic which, however, has pretty the same specs as the E75.
There is a (really) weird solution posted in this thread. I hope it works for you just as it did for me as well as many other users.

Problems with my New N9

Hello,
I have identified the following problem with my new N9
Map and drive icons are not opening
I can not download from nokia store
When it is not in use, the screen turns to green and drains the battery very fast.
I need anti virus, Virus has attached the phone.
Urgent attention is needed.

that certainly sounds odd...it is the first i have heard of this.
can you go to settings/about product and post EXACTLY what it has under "Version"
it should look something like:
PR1.1
(20.2011.40-5_PR_001)

A mapped elements relationship with other elements cannot be preserved

Hi,
I am trying to create an XML file from an XSD using excel macros and data from excel worksheet. The mapping takes place fine. However, when I try to save the mapped items into an XML file using SaveAsXML function, it gives me the following reason why the
XML is not exportable:
A mapped elements relationship with other elements cannot be preserved
Could someone please help is resolving this issue?
Thanks

Preamble: I am not a specialist, on the contrary. I discovered xml a few days ago trying to submit returns based on two quite different compulsory xsd schemas established by local authorities. So this note has no other pretention than
to try to help others starting from same level.
The plus: I discovered I could do it (with limitations) from Excel 2010 by attaching the provided xsd and mapping the relevant fields to excel data cells. This is reasonably described on MS sites & elsewhere, although the MS tutorials
do not focus on this particular objective, which is important as authorities are using more and more XML to expect returns.
The minus: I stumbled across stupid issues (in fact pulling my hair...), which could be better highlighted in MS doc for the newbies like me, because at that stage of knowledge and on your own, all seems unsurmountable. When Excel gives
the error messages, there is little indication on why and where the error occurs. My two common errors difficult to debug:
1. Denormalized data error
2. Relationship cannot be preserved error
What I was doing wrong for the first xsd then even for the second by accident:
1. In error, I was mapping an element occurring max once in the XSD schema to an element in an "Excel Table" (the “new” table formatting available in Excel 2010). I solved this by de-mapping the culprit element, converting the "Excel Table"
to ordinary ranges using the button provided in the ribbon for this, and re-mapping. From there, (nearly) each time I was mapping a new element / attribute to a cell in the worksheet, I used the button "Verify map for Export" giving me debugging message soon
enough before mapping the whole data set and finding it was wrong a bit late and not knowing exactly where it started to go wrong. Also, for the repeating component, I had set manually the Excel table for the whole recursive element beforehand as I found out
that when using the dragging process, the results could be random (some attributes in the table, others in other tables resulting in errors type 2 relationship).
2. Relationship error is a more nagging issue as it seems to relate to a structural limitation of this Excel 2010 export mechanism. Flattening a database with several depth levels (list of lists) is not trivial, so Microsoft stipulates
a bit buried in notes while it should be in bold at the top that Excel (which version? also 2013?) "does not support recursive structures that are more than one level deep". Happily, while the xml schemas I had to follow where providing for several levels
deep (3 in my case), I needed only one for both xml files. So, I copied the “too complex” xsd schema, updated it manually to suppress 2 levels. I remapped and tested. The error messages had gone. I exported. Then, I had to simply add the
previously deleted opening & closing tags manually using a free editor (Vim with thanks to that author).
But unless my understanding is wrong, which is quite possible, readers should understand that this documented limitation can become a structural stumbling block if they need absolutely recursivity with more than one level depth (list of lists). So, if
I can do it in Access from a DB (I still need to find out how & forum guidance is more than welcomed), this will be my future way to explore.
To finish, I validated the exported xml against the compulsory xsd schema using the online tool provided free by CoreFiling to ensure basic formatting mistakes had not been committed before submitting the returns for online validation
by Authorities application. I have MS Visual Studio Express installed which may help as well but I don’t know how to use it for this.
NB: I found also easier to copy (dragging top of the xsd tree) all the xsd elements /attributes in bulk from the xsd schema from the box on the right to a worksheet. While results would not be useable “as is” to map (it would most probably
give errors), at least, it provides a good initial template with the right headings for all the elements / attributes facilitating restructuring (occurring once, elements part of a recursive table) then map properly and reasonably fast. Before doing this,
I was copying manually the xml headings from the Word documentation provided by Authorities, which worked but was more cumbersome and risky.
Conclusion
I had never read about xml before (just heard often about it). It took me around 6-7 hours to learn some critical basics about it and about these specific xsd schemas. With a few trials & errors, I could use Excel 2010 to produce the
xml files required for the two schemas I needed. The great advantage compared to an online submission of data to Authorities is that it a process easy to repeat quietly at work (or at home) and enabling to check peacefully and thoroughly the xml data files
before submitting them. If wrong submissions have been made, it enables automated corrections much easier as well. It is within reach for users with reasonable but not outstanding Excel / Xml knowledge but it requires some initial time investment.
Hope this saves time for others.
acontrario
Brussels

How to initialize the index with "at new" command ??

Hi All,
I am facing a problem of Initializing the index .
I want to Initialize the Index with the " at new "
command within a loop but its not working.
Otherwise,please tell me the way to put a flag on the first record with " at new " command.
Please provide a solution ASAP.

loop at itab.
if sy-index = 1.
set ur flag.
endloop.
check the code below..
LOOP AT lt_citm_b INTO wa_citm_b.
    AT NEW vbeln .
      CLEAR: wa_temp_output , lt_temp_output[].
    ENDAT.
    AT LAST.
      lv_t = 'X'.
    ENDAT.
    LOOP AT lt_char INTO wa_char WHERE instance = wa_citm_b-instance.
      MOVE: c_d TO wa_temp_output-type,
      wa_citm_b-vbeln TO wa_temp_output-vbeln,
      wa_citm_b-posnr TO wa_temp_output-posnr,
      wa_citm_b-matnr TO wa_temp_output-matnr.
      MOVE-CORRESPONDING wa_char TO wa_temp_output.
Special requirement
     IF wa_temp_output-atnam = c_itr AND wa_temp_output-atwrt = c_itr03
                                                    OR
       wa_temp_output-atnam = c_cosr AND wa_temp_output-atwrt = c_osr03.
        CLEAR: wa_temp_output-atnam, wa_temp_output-atwrt.
        MOVE: c_iorp TO wa_temp_output-atnam,
              c_in2-os_nd TO wa_temp_output-atwrt,
              'X' TO wa_temp_output-flag.
      ENDIF.
*If the characteristic value for PMFREQUENCIE is initial need to pull
*the floating value.
      PERFORM fr_get_float TABLES lt_char USING wa_char-atwrt
                                                wa_char-instance
                                                wa_char-atnam
                                       CHANGING wa_temp_output-atwrt.
*To recognize if contract item have extended and standard
*characteristics.
      PERFORM fr_ext_std USING wa_temp_output-atnam
                      CHANGING wa_temp_output-ext
                               wa_temp_output-std.
      APPEND wa_temp_output TO lt_temp_output.
      CLEAR: wa_temp_output, wa_char.
    ENDLOOP.
    SORT lt_temp_output BY vbeln posnr std ext.
    AT END OF vbeln.
To translate the data according to the mapping rules
      PERFORM fr_translate.
      IF lv_t = 'X'.
        DESCRIBE TABLE lt_output LINES gv_count.
        READ TABLE lt_output INTO wa_output INDEX gv_count.
        IF sy-subrc EQ 0.
          CLEAR wa_output.
          MOVE: c_t TO wa_output-type.
          APPEND wa_output TO lt_output.
        ENDIF.
      ENDIF.

With the new version of numbers, 3.0, how can I stop the spread sheet from scrolling horizontally without reducing the size?

With the new version of numbers, 3.0, how can I stop the document from moving horizontally? When I scroll up or down I find it annoying that the document might shift to the left, and then I have to scroll it back to the right. The only way I've found to stop it from moving horizontally is by reducing the document down to about 50%, but then I can't read the document. I prefer having the document set at 125%, but then the bottom horizontal scroll bar shows up, and then the document can shift to the left if I'm not exact with my scrolling up or down.

Hi Nels,
Please update your profile. Numbers 3.0 will not run on Mountain Lion (10.8.x)
With the new version of numbers, 3.0
imac, Mac OS X (10.6.3)
iMac, OS X Mountain Lion (10.8.4)
Regards ,
Ian.

Maps 3.0 with E75 (new SW 125) A-GPS Problem

Similar Messages

Maybe you are looking for