Maps 3 and city explorer

can someone please explain what city explorer is. It says it adds walk guidence but i can already pick a location and press walk to and ive never bought a walk licence just drive licence. Please explain the difference. Also where have city guides gone? In maps 2 i could purchase city guides and i cant find an option now? Finally i saw on maps 3 "locate via coordinates" or something similar and now i cant find it. Is there a way of picking a location to go to using coordinates? Thanks for your help.

have you tried scrolling right? i'm a bit lazy to post a screenshot (would have to dig out my cable as i don't have a card reader or bluetooth on my old laptop) but what you should do is enter your coordinate numbers one by one, then press right on the directional key. on my N78 it scrolls across to the next screen where 00'00.00"E is displayed. for example using that coordinate you have displayed on the top of your screenshot:
just enter the numbers directly, like the 55 then press the right key to go to the next one, enter the number and so on. unless after the first one it scrolls across automatically. after you get to the N, 00 just scroll across using the right direction on the main key and it'll show the E coordinate. when you get to the E key press the up key and it will change to W. funny thing is that you cannot use the C key to delete any extra numbers you have entered in the coordinates, bit stupid if you ask me
if you need any more help, i'm happy to help
thanks for the kudos mate, you are my main beneficiary this week , keep them coming heh
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Similar Messages

Non-navigation parts of "City Explorer" in Maps 3....

So, City Explorer is supposed to provide travel guide information in addition to navigation. (Weather has always been available.) However I can't find any way of getting this. A perusal online suggests it gives me an "enhanced" index, but I can't find any extra info in my search results.
Also, I'm not sure if this was always the case or is a result of getting City Explorer, but I have a lot of duplicate search results! Some of them are obsolete or incorrect (e.g. entries for both Cineworld and its previous name, UGC) and usually only one has comprehensive information (web site, weather). Should I delete my old maps and index file and reinstall or something?
Thanks all.
Help I'm trapped in a sig factory.

Oh, also I'm supposed to be able to access "Here and Now" via a bookmark in the browser. There's no such bookmark and a quick Google only gets me the beta labs application which apparently doesn't work on the N79. So I think this service might've been nixed. What's the URL of the bookmark if it's still there?
Help I'm trapped in a sig factory.

Few questions about "city explorer"

- I noticed it can tell me where the metro is, but could nokia maps + city explorer tell me what line should i take in the metro and which station i should go out?
- Does it all require data transfering while i'm walking, or can i donwload it all before, where i have wifi? (like nokia map-loader)
- same question about the guides...
Thank's!

You can find most of the answers here - or to links to the answers -
http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp_acc_admin_en.pdf
I haven't used the Explorer accelerated for a long time, but as far as I remember in rsddstat i think you can identify the explorer usage from the user id, but not sure - try and see.
You can also run all your BIA indexes at the same time if you want to, the algorithm takes care of the table locks and switch to other index
Querysnap shot index is a SNAPSHOT of the data at the time of the index - it will never change unless you re-run the query and index it. Regular BWA indexes gets updated when you load data to underlying cubes and run BWA rollups/change runs. The querysnap shot data will not change. I like them if my query output miliions of lines - such as ZCUSTOMER. With query snapshot, you can put all of them to explorer for customer segmentation etc purposes
Cheers
Tansu

City Explorer on 3720C

Cant buy licence for city explorer... option does not exist. maps and map loader uninstalled and reinstalled... still cant purchase. Menu option Options > Shop & licences > My licences > Update is not on the 3720.... any clues???

Hi Atul,
Yes, unfortunately that is the whole error message. I did see in the "Error Messages Explained" document where it says to check to make sure the servers and web application are not incompatible. I'm not exactly sure what I should be looking for to make sure they're compatible. Any hints?
Thanks,
Jeff

According to nokia maps , half my city is on water

i'm using a 6110 navigator with the latest nokia maps for navigation around Alexandria, Egypt. according to nokia maps a great part of the city, although showing streets and names is on water. in other words the map design shows blue water underneath a great part of the city's costal line with streets and complete blocks of buildings shown to exist on water.
this disturbing visual problem exist in the newest egypt map "8.1 Mb". has anyone else noticed this???
Fear not those who argue but those who dodge

I sent my N97 (RM-507) off to the NokiaUSA care center a few weeks ago for the GPS antenna shielding fix.
This past week I updated to v20 firmware, did a hard reset and reinstalled all applications from scratch, including the Maps for the USA.
I'm running Nokia Maps 3.01 09wk30 b02
and Maps data version 0.1.22.103
Testing the GPS this morning....outside, no obstructions, clear blue sky....I get 5-9 green bars on the satellite fix, but my position keeps jumping around (including the altitude per Locations) and is 30-40 yards EAST of my actual position relative to the map background.
Using the Search function to locate my actual numeric address, the Maps application puts that about 30-40 yards WEST of the background indication based on the map background.
Thus the total map accuracy is 60-80 yards off EAST/WEST in terms of displayed position versus numerical address!!!
For comparison, I ran a test using Google Maps and allowed it to use the N97's GPS. Not surprising, it located my position quickly and accurately within about 8-10 yards, though it did continuing moving a bit but never more than about 2-3 yards at a time.
I am running out of patience with Nokia. The N97 has been out since July 2009 and their Maps software and GPS drivers are probably the worst that I've ever seen in terms of accuracy and stability.
I hear of others using Garmin software on their N97, but until I'm certain beyond a shadow-of-a-doubt that the N97's GPS hardware is stable, accurate and dependable I really don't want to spend the extra money for a 3rd party program and I definitely won't be spending any money on Nokia Map navigation license.

Data missing for Region and City in PSA

Dear Experts,
I have a generic datasource, which shows data for Region and City when i extract the data through RSA3 (Extractor Checker).
When I extract the data to BW, in PSA i dont see data for Region and City. I have no idea what went wrong.
The data for Region and City are not available in the datatarget also.
Please through some lighte on this if you have come accross this.
Thanks in advance... Hoping to see some solutions.
Saravanan Payani.

Hi Amit,
Nice to see your reply. The objects to which data was not available in PSA are 0COUNTRY and 0REGION. These two are mapped with fileds CITY and REGION respectively in the transfer structure.
I am not loading it as an attribute of some other. I believe that if these fields (CITY and REGION ) are hiden in datasource then during replication we will not be having it in transfer structure for mapping. As these fields are available in transfer structure, so these are not hidden at datasource.
Please suggest me if something else i can check.
Thanks for your time.
Saravanan Payani

County Code and City Code in CRM

Hi Guru,
We are having big issue now. Our CRM is fully integrated with ERP, our user want to have the county code and city code in CRM customer master creation. Seems these two fields are not available in CRM, please advice.
Rgs, Michelle

Hello Michelle,
IN BP Transaction code if you expand the Addess Tab you will find "City/State/ZIP Code"
Here you will get City code.
You can use ZIP Code to map the Country code.
Regards,
Rajendra Sonawane

Remote Panel and Internet Explorer

Hello. I have a problem with a Remote Panel and Internet Explorer. I create a measurement system in LabVIEW. It�s composed of a main front panel and a few subVIs with independent front panels opened from main Front Panel when I press appropriate button. As a local system everything works ok but I try to create a web version of this system. I decide that I can use a Remote Panel. In Web Publishing Tool I was creating a web page for each of Front Panel. I try to have the same functionality as in local system, so when in Front Panel (opened in Internet Explorer window) I press appropriate button I want to open secondary Internet Explorer window with a subVI inside. And now I�m stuck because I can�t open this secondary window in a network w
orkstation. Has anyone have an idea how can I do it?

> Hello. I have a problem with a Remote Panel and Internet Explorer. I
> create a measurement system in LabVIEW. It?s composed of a main front
> panel and a few subVIs with independent front panels opened from main
> Front Panel when I press appropriate button.
I think you have two options. You can open most modal subVI panels
directly on a remote machine. The popup panels won't be in a web page,
but it will work with few changes.
A second approach would be to change the app slightly. The buttons that
launch the subVIs will turn into URL links. The links will open a web
page with a different embedded panel.
Greg McKaskle

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

zapgrap wrote:
there is no information of locations.
Then no information exists. Use the Report a Problem button within the app to report it.

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

Problem with ACE and Internet Explorer 8

I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.

Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel

Problem with ExternalInterface.call and Internet Explorer

Hi, I´m developing a site, (
www.gen-studio.com/avelart2
), and I´m using a swf to display a set of thumbs that when
clicked show an item and its description on the browser, those
items might be images or video, everything works fine with the
images.
And actually it works fine with the videos too, when using
Firefox, but when I test the page on Internet explorer it just
doesn’t work!
On principle let me describe how it´s supposed to work,
a thumbnail when clicked sends an id number to javaScript using
ExternalInterface.call(“myFunction”,myId); -I´m
using AS3 for the swf´s-
the javaScript file has already loaded (ever since$(
document).ready) a XML file which uses to match the id with a file
and the description, if the item to show it´s a video, then it
creates a variable which holds a string with the proper html to
embed a swf (a swf movie player that resides just next to the HTML
file), when loaded, the swf movie player uses
ExternalInterface.call() to ask for the source of the video that
has to play, and that function is as follows:
setVideo: function(){
alert("hola");
return comun.miVideo;
(The alert(“hola”); is just to test that the
function is being called), which it is, but it returns null as a
value instead of the proper string, and this happens only on
internet Explorer, but works correctly on Firefox.
I´ve been reading all day about the subject and found a
few interesting things, which though have made me narrow my
problem, they haven´t just provided me with a solution, what I
found so far:
-I must have in account flash security issues: Checked (my
actionScript follows:)
import fl.video.*;
import flash.external.ExternalInterface;
flash.system.Security.allowDomain("*");
var vid:FLVPlayback = this.miPlayer;
vid.source =
flash.external.ExternalInterface.call("comun.setVideo");
-ExternalInterface and Internet explorer don´t work
properly when tested locally: Checked (I have a server on my PC and
I´m testing the site as well in the above direction).
-The object tag holding the swf must have a proper id
attribute: Checked.
-It´s super important the way the object tag is formed:
Checked, and I also tested the tag separately (I put it directly in
the HTML instead of adding it via javaScript) and it worked as
expected in both Firefox and Internet Explorer, which leads me to
believe:
-I read somewhere that if you add the object tag by using
innerHTML or appendChild, returning values from javaScript to swf
won´t work, but I couldn´t find an explanation nor a
solution.
Well, as I said now I´ve been looking all day for an
answer, so I really hope you can help me or give me some advice on
the subject, thank you so much for your time!

Hi! it solved itself !! (nahh, I wish), but it indeed had a
solution, it was something quite simple, and I don´t really
understand why it was not working in the first place, but here is
the thing:
I´m learning jquery and this is the first proyect
I´m officially using it, so I was using
$('#myDIV').append("string"); to embed the swf, (and it was working
perfectly on Firefox), so since I had narrowed my problem to those
lines, I decided to try some good-old-fashioned-javaScript and
changed it for: var myDiv =
document.getElementById('thatParticularDiv'); myDiv.innerHTML =
('string'); and it worked both in Firefox and IE !!!!!! :)
I´m quite happy about it, and if someone knows
what´s the issue with my jquery approach I would love to hear
it. THANKS !!

Swf link not working in Firefox, Opera and Internet Explorer but works in Safari

Hi,
I'm sorry but Im a real newbie and really need help!!!
On the homepage of my website I have put a swf file that I linked to another page in my website through the div a href link and it displays great on safari and links, however in other browsers, when i try to click on it, it comes up with the link at the bottom of the browser (where it sometimes says Done), however it doesnt actually link, it jsut stays on the homepage.
Here is the coding i put in:
<div id="products2">
          <p>
          <a href="Our_brands/index.html">
            <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','449','height','449','title','Products','src','Productions/boxes3','quality','high','p luginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwav eFlash','movie','Productions/boxes3' ); //end AC code
          </script>
            <noscript>
            <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="449" height="449" title="Products">
              <param name="movie" value="Our_brands/boxesnew.swf" />
              <param name="quality" value="high" /><param name="SCALE" value="noborder" />
              <param name="allowScriptAccess" value="always"/>
              <embed src="Our_brands/boxesnew.swf" width="449" height="449" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" allowScriptAccess="always" scale="noborder"></embed>
              <br />
              <br />
            </object>
            </noscript>
          </a>
          </p>
        </div>
Could someone please tell me where I am going wrong?
I would REALLY appreciate it.
Thank you in advance!!

I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
Does that make any sense?
Sorry if it doesn't.
Thanks for the quick reply as well!!!

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps.

How Do RoboHelp 9 WebHelp Generated Files Handle Map IDs and Aliases?

The text below was written by our team's developer/architect. I am the help author who uses RoboHelp to write content and generate the help files, but I am clueless how it all gets generated and is deployed. Please help. We use RoboHelp 9. I use it in Windows XP and our app and help run on IE 7, 9, and Firefox (multiple versions).
"Our application uses the numeric identifiers associated with the Map ID. For example, to get to the <appname>_home_page.htm file, we use the number 1053. <appname> = pecs, in this example.
All of this is used in a call to a RoboHelp method defined in the RoboHelp_CSH.js file. The mehtod we are calling is the RH_ShowHelp() JavaScript method and the code to perform the call, when you click on Page Help, is this:
RH_ShowHelp(0, ''/pecsHelp/index.htm>pecsHelp',HH_HELP_CONTEXT,topic);
Topic is translated to the Map ID number for the page help. HH_HELP_CONTEXT is defined in the RoboHelp_CSH.js file. This method translates into a URL and from what I have seen, the URL that gets generated is this:
http://{server}[:port]/pecsHelp/index.htm/{server}[:port]/pecsHelp/index.htm#<id=1053>>pecsHelp
Server and port get replaced with the appropriate values. I have no clue how id=1053 is supposed to get translated to mean "pecs_home_page.htm". If you check the PECS_help.h file, you will see the following entry:
#define PECS_Home_Page1 1053
Then in the RoboHelp alias file (PECS 3.0.ali), the following line is in the file:
<alias name="PECS_Home_Page1" link="pecs_home_page.htm"> </alias>
But both of these files are used during the WebHelp generation process and I don't know how the WebHelp generated files handle the Map ID and aliases."

You need to assign the numbers you find in the pecs_help.h file to topics in your help. You do this in Context Sensitive Help > Map Files > All Map IDs. (From RH7, but I assume the location is similar in RH9.) This creates the entries in the .ali file.
Peter Grainge suggests a couple of sites to read for a greater understanding here:
http://www.grainge.org/pages/authoring/calling_webhelp/using_map_ids.htm
(Although the second site is based on RH X5, the basic concepts and procedures should be very similar. )
HTH,
Amber

Maps 3 and city explorer

Similar Messages

Maybe you are looking for