Maps changes the route?

A friend emailed me a Google Maps link for directions to his cottage. When I opened his email on my iPhone and followed the link, the Maps application launched, good, BUT it altered the directions and gave me a new route. Any ideas why this would happen? Is there a way to "lock" these direction so Maps doesn't make any changes?
Cheers,
Logan

Route
Routes are determined depending on the following criteria:
Country and departure zone (departure zone of the shipping point) - Please check shipping pt Definition
Shipping conditions agreed in the sales order                               - check at VOV8 (document type)
The shipping condition is defined in shipping point determination.
Transportation group of the material                                             - check at material master in MM02
Country and transportation zone (receiving zone) of the ship-to party - check at XD02 (general data)
Storage location
It is determined from shipping pt +delivering plant + storage conditions.
Please goto OVL3 and check u have assigned all the entries properly.
hope it is useful
Reward points if it is useful..

Similar Messages

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Change the routing assigned to a job by program

Is there an API, or any procedure which allow to change by program the routing of a WIP job (validate the changes and replace the primary routing which imply replace the old operations and resources by the alternate routing resources and operation, and reschedule the job) ?
The purpose is to Mass change the routings on jobs (for example: change the routing of all the unreleased jo of an item category).
Thanks in advance.

You have to:
- eliminate the stock of that material/batch
- mark the batch master with deletion flag
- archive the batch master
http://help.sap.com/erp2005_ehp_04/helpdata/EN/eb/650362e5a511d285ed0000e82013e8/frameset.htm
After archiving you should be alble to do a GR with same batch number for another material...hopefully...
Edited by: Csaba Szommer on Jul 19, 2010 8:31 AM

Can I change the route of an animated map in iMovie?

I am making a video of a recent cruise our family took, and the map animation just makes a straight line from place to place. However we went from Key West to Grand Cayman and the route goes right over Cuba, which is difficult to do on a boat . Is there anyway to make the route swing around Cuba? It will just make the animation of our route look a lot more authentic. Thx.

RiverShark wrote:
Is there a way to put in 3rd & 4th intermediate destinations via coordinates? So then maybe I could input coordinates in the ocean and the line would go through those. But even if that's possible (which I cannot find that it is) I assume it would make a "dot stop" at them which I don't wnat to do.
Sorry, I don't think I'm going to be much help. If you're pulling photos from iPhoto, then you can adjust the Place and Time/Date the photo was taken using those iPhoto tools. The changes should be reflected in iMovie either automatically or by reimporting the photo to iMovie. This would make a "dot stop," but I don't think there's a way around that.
Hopefully someone else has a better idea.

HP deskjet 3050 no longer connects to wireless since changing the router

The printer no longer prints to wireles or when connected via USB for that matter. Recently changed routers and now it doesn't pick up the printer. I have tried to reinstall the software and that hasn't made a difference. Help please!!

Hi nikki879,
Here is a way you can connect the printer to your router:
-Restore network defaults inside the wireless menu on the printer front panel.
-From your computer, connect wireless to the printer's network (it should be a name similar to HP-Setup-xx-Deskjet 3050A J611).
-After successfully connecting to the printer, open your web browser and type in 192.168.223.1 in the addressbar and press enter.
-Click on Wireless Setup Wizard
-Select your router and enter the password to connect the printer to the router.
Rerun the printer software from your computer to rediscover the printer over the network.
Show support by clicking the Thumbs Up in the post that resolved your problem. Doing so will help other forum members find their solutions too.

How do we change the router password??

Does anyone know how to change the password for the router so it's not just the password on the bottom of the router??

Let's look further into this ALS08JDS87! Are you referring to the Verizon Wireless 4G LTE Broadband Router? If so, you can access Configuration Tool to make security changes. View visuals here http://vz.to/1e7QijP Please feel free to reach out or visit us here http://bit.ly/yN1P80 anytime. Thank you.
TominqueBo_VZW
Follow us on Twitter @VZWSupport

RAP and MAPs change the channel and Radio Role

I have a WLC 2504 with version AIR-CT2500-K9-7-5-102-0, LAPs are AIR-CAP2602E-A-K9
I set serveral LAPs for working in mesh mode, I set three Bridge Group Name, the first group has one Root AP and three MAPS working in channel 157, every MAP has a switch connected to its ethernet port.
the second group has 2 LAPs one Root and one MAP, all working in channel 48. The MAP is connected to a switch.
the third group has 2 LAPs, one root and one MAP, all working in channel 149. The MAP is connected to a switch.
The issue is the next:
At the beginnig every LAPs were associated to its bridge group and in the channel defined but suddenly all LAPs of group 1 move to channel 48 (second group) includind the ROOT AP. This happend after the switch that connect to the RAP was disconnect from LAN.
In order the associate once again LAPs of the first group to the channel I defined previously I connected RAP to the switch once again I notice the channel shown was 48 and in downlink role mode.I change to channel 157 reset the LAP and wait several minutes; after the first reset the RAP remains in channel
48 (it must be 157), I reset once again and wait severeal minutes. Finally the RAP was up and working in channel 157.
After this I reset the MAPs that corresponde to BGN 1 , after severasl minutes finally just one MAPs for BGN 1 was show in the correct channel and in the correct Radio role, I have to reset several times the other MAPs until they were shown in the channel I set previously and in the correct radio role.
I would like to know the reason the RAP and MAP move to a differente channel eventhough I define de Bridge Group Name in every one and the specific channel.
regards

Hi scott ,
Thanks for your explanation, very clear.
In my scenario every RAP connet to a switch where I define VLANs and specific VLANs are allow to pass. If RAP and MAP join to a different RAP (different BGN)
it will allow to pass traffic or maybe don't allow traffic I needs to . That's why I worry about the keep the MAPs join to the correct RAP and the RAP keep in the BGN and channel set previously.
is there any option to this avoid this issue?
Thanks a lot for your time
regards

Changing the router (BT2700HGV) with a NETGEAR DGN...

We had a lot of issues with our router (BT2700HGV) and we decided to change it to a third party router. And somebody brought a NETGEAR DGN2200. What I would like to know, if anyone else has installed and configured a DGN2200, is if I can use it to do the followings (which were available on the initial BT router):
1. allocate static IP addresses to LAN computers (we have 5 static addresses, within a specific range);
2. forward only certain ports from certain PC's (example: 7070 for 192.168.0.1 - which should be 63.25.21.3 due to static IP allocation, 6060 for 192.168.0.2 - which should be 63.25.21.4, again because of the static IP addresses, etc.);
Thank you!

Maybe all modems are coming with routers but most routers do not include modems.
If Apple included a modem, why would it be an ADSL modem? Why not a cable modem? Why not a dial-up modem? Why not a cellular modem?
When manufacturers offer modems they have to ensure that they match the individual requirements of internet providers since there is often settings that make modems incompatible or at least less than optimal with one service or another. Why go through all that hassle?
Instead offer a device which connects to Ethernet (which is a global standard) and provides standards based networks. That will ensure compatibility and large customer base.

In FX 8 (WinXP and Linux) I'm not able to change a route of the Google Maps routeplanner via drag&drop, the markers of start and destination don't appear and therefore cannot be moved, either.

Usually (IE, Firefox 7 and below) if you go along the blue line of a route planned by Google Maps, a small circle appears which can be dragged and dropped to other roads so that the routeplanner changes the route. This is impossible with Fx 8, the circle doesn't appear and when trying to drag&drop I only move the map. The same applies to the markers which mark the start and destination of the route, they are not visible and cannot be moved. Disabling Adblock and Firegestures didn't solve the problem.
When the page is loading for a moment you can see the symbol for an image which is not yet loaded both where the markers should be and if you go along the line with the mouse. As soon as the page is completely loaded you don't see this anymore.

There is opened a bug in Bugzilla:
https://bugzilla.mozilla.org/show_bug.cgi?id=715124

How do I change the settings in Maps from miles to kilometers?

How do I change the settings in Maps from miles to kilometers?

I've had an entirely different experience with Map units. Maps on my iPad (iOS 8) will only deliver units in kilometers, no matter how I adjust the settings for Maps or Region/Language. I am trying to calculate distances between two locations in the United States where all road distances are measured in miles. My iPad region is set to United States. When I open the settings for Maps, change the units from kilometers to miles, and close the window, IOS-8 changes the setting back to kilometers every time.
Slick interfaces and device designs aside, at times these little annoying bugs just make the folks at Apple look like rank amateurs.

Can I use Cisco Connect if I change the default router IP address?

I am adding my E3000 into an existing network behind a SonicWall firewall. I am using an address scheme of 192.168.168.xxx When I change the router address to 192.168.168.10 and disable DHCP in Cisco Connect, I am left with only being able to access the router through the web interface. This seems pretty lame; I've read other threads on Web vs. Cisco Connect. Is there a quick fix that will allow Cisco Connect to still find the router after I've made (just) these two changes?
--David C

Yes you still will be able to use the Cisco Connect software if you have changed the Routers IP address, But if you change the Router password of Wireless Security then you wont be able to use Cisco Connect software.

Setting Up Time Capsule as a DHCP server in the router portion

Hello
I have converted my existing wireless router and network hard drive to a single time capsule. My old router was setup as a DHCP server and I had the IP range set to 10.0.0.1 to 10.0.0.50 and had a IMac, Windows PC and Copier connected to the EtherNet ports and my home network ran perfectly but only at 100MPS.
I bought the time capsule to eliminate the old router and network hard rive to a single unit to free up space, but I can't figure out how to set up the time capsule router as a DHCP server? Every time I try and change the router address range and tell the software to configure the time capsule, I get errors saying my DNS range is not valid and the IP range is conflicting to the Internet settings?
My old linksys router was so easy to setup, I just selected DHCP, gave it a range and the router took care of the IP address for the Internet. I consider myself a smart guy but apple has made this a little difficult.
I would also like to setup the time capsule so it show up as an external drive in my mobileme account so I can access my files when I am on the road. HELP!!!
Ron

ronbak wrote:
I have converted my existing wireless router and network hard drive to a single time capsule. My old router was setup as a DHCP server and I had the IP range set to 10.0.0.1 to 10.0.0.50 and had a IMac, Windows PC and Copier connected to the EtherNet ports and my home network ran perfectly but only at 100MPS.
I bought the time capsule to eliminate the old router and network hard rive to a single unit to free up space, but I can't figure out how to set up the time capsule router as a DHCP server? Every time I try and change the router address range and tell the software to configure the time capsule, I get errors saying my DNS range is not valid and the IP range is conflicting to the Internet settings?
In the Internet panel and Internet Connection tab of AirPort Utility, do you have "Configure IPv4" set to "Using DHCP" and "Connection Sharing" set to "Share a public IP address"?
I would also like to setup the time capsule so it show up as an external drive in my mobileme account so I can access my files when I am on the road. HELP!!!
You can set that in the Advanced panel, MobileMe tab.

Need Help on How to Change The Encryption Key and or Change security settings

Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
Message Edited by DARK_MARIO on 01-06-200706:10 PM

Hi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

Problems connecting second pc to the router

Hi everyone,
My first PC is connected to my FIOS router and everything is fine with that. I know the router admin login and the router password. But I am having a hard time connecting my second PC to my FIOS router and to the internet.
I have been using the FIOS Connection Wizard, and I have been getting the following message:
"Connectivity between your computer and your Verizon FIOS router is working fine, however we are unable to login to the router to collect the SSID and WEP Key"
It seems as though the connection wizard does not even acknowledge the router password I enter. I will type in the password, then press enter and the wizard does not seem to do much with the password. I rebooted the router, changed the router login and password, and entered those new details into the wizard, but the wizard wont connect. When I try again, the wizard prompts me for the password of the old admin!
Any ideas regarding how to solve this problem? I appreciate your help.

If you are using the FIOS connection wizard and it is asking for your SSID and WEP you are trying to set up a wirless connection.   Make sure to choose the correct option, it should be something like, set up new router or internet connection. ie. Don't choose, setup new wireless connection.
If you still have problems then,
On your computer that successfully connects to the internet, right click your local area connection under network connections and go to properties. Scroll down to Internet Protocol (TCP/IP) , highlight it and click the properties button. Use the same settings you find here on your second computer. If your router has DHCP turned off and under these properties your IP and DNS settings are visable then on your second computer input all the same settings except change the last number of your IP address.
Ex.       1st computer settings : IP - 192.168.10.15   then
               Set 2nd computer to : IP - 192.168.10.16
Hope this helps.

Automatic determination of the route

Hello experts.
Is there any way to determine the automatic route for stock transfer between storage locations, using the shipping point of origin and destination?
The automatic determination of the route is transport zone and country, being the center does not assign correct. Or I can use some user exit to change the route before the creation of delivery (shipping)?
Thanks

Dominique,
Route determination uses the country code and transportation zone from the address records as some of the inputs into the route determination. Dependent on the IS solution you are using and SAP version the configeration determines how the route is determined.
If you are on a standard EEC 6.0 system try the configuration path (transaction SPRO)
Materials Management -> Purchasing Purchase Order-> Set up Stock Transport Order -> Set Up Stock Transfer Between Storage Locations -> Set Up Storage-Location-Dependent Shipping Point Determination ->
Define Rule for Determination of Shipping Point
Assign Shipping Points According to Storage Location
Logistics Execution -> Shipping -> Basic Shipping Functions -> Routes -> Route Determination
For an STO the from address record is take "from" the shipping point (determined from plant or storage location see configuration options above) and the "to" this the receiving plant.
James

Maps changes the route?

Similar Messages

Maybe you are looking for