Maps for mapquest & others will not load,"bocked mbecause of unresolved driver issues"
the graphics on some sites like mapquest don't seem to work. I get a blank area where the maps should. Started after last or previous update. mapquest does work fine with IE
Hello keith6969,
could you make sure that your drivers are up-to-date and that your plugins are as well? You can usually find your GPU's (Graphics Processing Unit) drivers on the official website of your brand and can check for your plugins at [[http://www.mozilla.org/en-US/plugincheck]]. Let me know how it goes.
Similar Messages
-
Mac for office 2011 will not load
Mac fo ruff ice 2011 will not load?
On an iPad (or any iOS device), not it won't. It is for Windows or Mac OS X only.
-
Install software for Deskjet 2540 will not load on Windows XP Home edition SP3 machine
I have successfully connected a new Deskjet 2540 printer to a Windows 7 machine, and IPAD Air, and an XP Pro laptop.
I cannot get the install software to load on and XP Home edition SP3 machine. I have tried all of the HP remedies that I can find, over period of two days, but the installation fails every time with the message "Installation failed. The software required for your printer could not be installed".
What can be done?Hi,
Thanks for your second installment of help suggestions.
I started check disk as you proposed and it ran happily for some hours with evidence of progress. However eventually I found the computer stopped with a number of suggestions for restarting. I tried all of these and some others, but got no further than the first Windows picture. At this point the machine restarts, and goes through the same process.
The printer problem, as you can see has unfortunately become secondary to trying to recover the system.
What I propose is to try to read the disc in question on another computer, and extract the important data files to a safe place. Then to return the disc to its own machine and use the recovery CD, to try to get the machine to recover with the minimum of loss. If this succeeds, I might even find that the printer software then loads without problem. There is a big IF there, and I won't hold my breath.
None of this relates to the printer problem, and fortunately i have three other devices running which are happily connected to the printer.
I just wnted to explain why there will be no further feedback for a while. I will take my time with the recovery process.
Thanks for all of your help. I have just been unlucky.
Regards -
"iTuneUp.dll" for tuneup add-on for 64-bit will not load
When I load up itunes with tuneup, I get the error "iTuneup.dll" could not load in 64-bit mode.
It goes on to say "Try contacting the plug-in vendor(s) to see if a 64-bit version is available.
Is there a 64-bit version out there or is there something else going on?This is iTunes version 12.1.0.71 and resolved the issue for me per TuneUpMedia:
This is their response :
TuneUp Support (TuneUp | Support)
Hello,
Thank you for contacting us.
We apologize for any inconvenience that this may have caused you.
If you are experiencing errors related to the new iTunes version for Windows machines 64bit, please install the fix from the iTunes support page below:
http://support.apple.com/kb/DL1784
If the issue still persists, do not hesitate to contact us.
Thank you,
TuneUp Support -
I bought itunes cards for my boys for christmas, cards will not load to their ipods
could they just be busy? This has never happened before on Christmas day. Anyone else?
I am having the sasme problem. I got two itunes gift cards and I cannot redeem them.
-
I sync 2.4 will not load
iSync for the ical and address book are working fine.
the iSync for the phone will not load. and it has a generic Icon. version 2.4.
I have:
reinstalled the isync. via update.
deleted it and reinstalled via update.
Tiger disk will not do a isync only install it wants me to archive and install a new 10.4 and then I would have to re-update back to 10.4.10. really do not want to do that.
I can not find 2.1.
I have repaired permissions and Disk Warrior and every combo you can think of.Because i had killed my iSync app by deleting it and I was not able to extract the iSync from the tiger installer disks, The 10.4.10 combo did not fully in stall the iSync app.
The isync from the system Pref. work fine, iCal, Address book ..ect. the problem was the iSync in the Application Folder would not load and had a generic Icon and was only 12Mb in size. So I need to get a base copy of iSync app on to my Mac. So i drage the iSync app (21Mb ) form my wives Mac onto my desktop. both mac are 10.4.10 Right or wrong it worked. -
K7N2G will not load windows xp with any type of dvd/cd drive installed?
This is on my old computer, the specs are as follows
k7n2g
athlon 2600+
radeon 9700 pro
Caviar SE wd800
1gb samsung ddr333
It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
Thanks
Chris
PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
two Opteron 250 90nm
2gb 2-3-2-6 Corsair Reg/ECC DDR 400
Tyan Thunder K8WE
1x BFG 7800GTX OC (one for now)
Audigy 4 Pro
Seagate Cheetah U160 10k 73.4 gb
Atlas V U160 18.3 gb
Lite on Dual Layer burnerYour Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
So let us get this straight.
This system used to work fine? Yes? Then what prompted you to reload the OS?
You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
A little more history might prove useful in helping us to give you better suggestions.
Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
+3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
Is this correct?
Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
Did you try clearing the CMOS and then initialize the default settings?
Do you have a cheap AGP card to try instead of the 9700? -
ITunes will not load missing MSI network drive message.
ITunes will not load missing msi on network drive message.
tried to reinstall but still looks for install files that are missing.The precise error message would aid a diagnosis, but this article might help:
https://discussions.apple.com/thread/2450004?threadID=2450004&tstart=0
tt2 -
I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?
Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
My iCloud Contacts will not load in Microsoft Office. error is MAP[ was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll. How do I correc t this problem?
Hey PCSISTAH,
Thanks for the question. I understand that you are experiencing issues with iCloud Contacts and Microsoft Outlook. The following resource may provide a solution:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks,
Matt M. -
I have a handfull of songs in my library that are not showing up bold like the other songs. When I click the icon to download from the cloud nothing happens and they will not load onto my ipod. When I look for them in the purchased area they show up as purchased and downloaded.
Welcome to the Apple Community.
So far as I am aware, books haven't been available for 6 years, so I'm wondering if you mean audiobooks.
Audiobooks are not currently part of the content that can be re-downloaded. -
I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual. -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
Safari and mail will not load but i am connected to internet and can download form itunes and other sourses is that HD failure? any suggestions ? verify disk says its OK
iOS 4: Updating your device to iOS 5 or later - Support - Apple
iOS: Unable to update or restore - Support - Apple
iTunes for Windows: iTunes Store connection troubleshooting
See if any of these three may help. -
iPad minis donated to a classroom. Teachers are trying to set up several iPads using the same apple id, but the apps will not load on any but the first iPad set up. What to do?
Can you assign existing devices to a DEP account? When DEP came out, you could not.
"This document offers guidance on some important considerations for getting the most out of your iOS deployment." Covers: Prepare your infrastructure. Set up devices. Configure and manage devices. Deploy apps and content. Plan for support.
https://www.apple.com/ipad/business/docs/iOS_Enterprise_Deployment_Overview_EN_F eb14.pdf
Quick overview of zero-touch MDM enrollment, DEP
http://www.apple.com/education/it/dep/
Consider DEP, Device Enrollment Program. Use VPP, Volume Purchase Program. Select an MDM, Mobile Device Management. Read the Google doc below and nsdjoey write up.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
Education
http://www.apple.com/education/ipad/resources/
scroll down after all the pretty picture. Click on the words "For It".
business site is:
http://www.apple.com/lae/ipad/business/#browse-it-resources
If necessary, scroll down until you see the Browse IT Resources button. Click on button.
MDM -- Mobile Device Management
For a comparison see this page:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
VPP -- Volume Purchase Program
http://www.apple.com/education/it/vpp/
Joe Rowe's Excellent guides
IT managers who are new to configurator and managing a cart of ios devices:
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
[ original announcement -- https://discussions.apple.com/thread/4256735?tstart=0 ]
Quick help presentation for students:
https://docs.google.com/presentation/d/18937JdleX2gymtSb8zfbDczV-76BdR2DIfCV9eJi yOE/edit#slide=id.g1b776944_0_224
Maybe you are looking for
-
Removing cookies does not work, either one at a time, or remove all. I tried from history and from the options screen. They appear to go away but when I go back in they are all back again. This is happening in the latest version that was automaticall
-
Gnome3.2 crash while surfing internet
Gnome3.2 crashed while i use chromium to surf the Internet, then it turned to the login screen. This happens several times. Here is my .xsession-error file: /etc/gdm/Xsession: Beginning session setup... /etc/gdm/Xsession: Setup done, will execute: /u
-
How to increase sound quality of GarageBand 1.3 exports from iPhone
I'm a new iPhone user. I bought the iPhone over Android specifically to use garageBand. So, I've created this song in GarageBand 1.3 on my iPhone. It's got a a couple vocal tracks (from apogee MiC) and one guitar track (from apogee JAM). I don't own
-
Logging sql queries without any changes in existing apps
Hi! Is it possible to log all SQL queries send from application to database via JDBC without any (or really small) changes in code of existing applications? I'm new to JDBC so any suggestions/ideas/best practices are welcome ;) Best regards. Edited b
-
Hello Developers, I normally use the stage colour as the background, but I want to change the colour of the background for one scene in a new IOS app I am coding. This scene will have some objects that are animated. I just want to use a solid colou