Maps - Is Close Good Enough?

I've been using Apple Maps and the turn-by-turn feature.   I really don't care about how pretty things look.  I care about how well they work.
Don't turn in your Tom-Tom or Garmin Nuvi's yet unless being close is good enough.
I used it last satureday to locate the closest Home Depot Hardware store.  Great job.  It found a lot of locations and allowed me to choose which I wanted directions to.
The turn-by-turn took got me in the correct direction and since I know the area I agreed with the directions.  HOWEVER, as I followed the directions I got to my destination a full .6 miles BEFORE the turn-by-turn instructions indicated that I had arrived.  That's 6 tenths of a mile offf ! ! !
In another situation, the directions took me through a major road closure.   Fortunately I knew the road had been closed for nearly a year (yes a year) and avoided the direction.
Depending on different situations this could be very dangerious.   I'm going to keep testing but I'm not going to give up my dedicated GPS for loooog time!   My GPS got me from North Texas to the El Paso, to Lareado, and back again.
I hope Apple is paying attention to these problems and will TEST the mapping app better.

Nokia should update the maps locally and timely. Nokia China team should take care of China maps to give a better user experience.
Contact Nokia this is a users forum we cannot help .
Contact Us button top of the page .
 jje

Similar Messages

  • New 8800GTX OC, Power supply good enough?

    I bought this   http://www.antec.com/us/productDetails.php?ProdID=28550
    It has 3, 12V rails all at 18A each..  2 6 pin connectors, SLI ready, 550 Watts....    I was told having 2 or more Rails at 18A each would be sufficient enough, or 1 30A rail..
    Is 3, 12V rails at 18A each good enough for the 8800GTX OC?

    504 watts divided by 12 volts = 42 amps.  That 42 amps is spread over three 12 volt rails that have a limit of 18 amps apiece.  If you have two 12v rails drawing close to their maximun of 18 amps then the third rail only has 6 amps available for anything that is connected to it.
    That is why I suggested that you do some trial and error in order to spread the load more evenly over the three rails.  Normally the motherboard's power is provided by one rail leaving the other two rails on a three rails power supply to feed hard drives, optical drives, fans, video cards and anything else that needs 12v power.
    You should have plenty of power to run your system but being careful about how things get their power leads to a more stable system that will last longer.

  • I am trying to download lion with the thumb drive how do i back up my files is time machine good enough or must i transfer everything to my hard drive

    I am trying to download lion with the thumb drive how do i back up my files is time machine good enough or must i transfer everything to my hard drive

    A erase of the drive or boot partition is not always necessary.
    Flashing question mark at boot could be a easy fix, sometimes it's the firmware that simply forgot what bootable volume to boot from.
    Try holding the Option key down while booting the machine, a choice of bootable options appears, select your OS X and boot up.
    When you get in, head to System Preferences > Startup disk and set it again new. This will tell the firmware what to boot from. Test it to see.
    Now if you don't have a selection of bootable options, it could be that the drive is dead, or OS X is erased or corrupted so it can't boot.
    You'll have to run through this list of fixes to see what's going on, if you need a hardware fix or what, I've also included links if you can't fix it and need to recover your data etc.
    (If it's not remmebering your boot selection then also run through the list to reset things.)
    Step by Step to fix your Mac

  • Looking for help in making my computer good enough to play games

    I bought a computer from Best Buy right after Christmas. It's a HPE-410y. I'm pretty happy with it in terms of speed and ease of use. I'm glad to be finally done with freaking Vista and blue screens of death.
    Anyho, a buddy of mine wants me to play Bad Company 2 with him. I don't know much about the game other than its a shooter. However, I did read in the editoral review that the ATI 5570 my computer came with is weak. Also, 300Watt power supply needs to be upgraded as well? Do you think a graphics card/power supply upgrade is all I need? hmmm
    I have glanced at the graphics cards at Best Buy when I've been up there, but not exactly sure what will work, what is good. Looking for any advice and help on what I should possible buy to get this computer good enough to play games.  I wanna do this maybe the end of next month. My budget is 450 bucks. I don't need to pay to have any upgrades I decide to get installed, my brother can help me do that. I just need help in what to buy.
    Thanks for any feedback.

    Agreed that it's an above average computer. If you still want to do the upgrade:
    http://www.bestbuy.com/site/Corsair+-+Gaming+Series+700-Watt+ATX+CPU+Power+Supply/1073697.p?id=12182...
    http://www.bestbuy.com/site/PNY+-+NVIDIA+GeForce+GTX+570+1.25GB+GDDR5+PCI+Express+2.0+Graphics+Card/...
    Coming right at your budgeted $450.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • How to close goods receipt PO

    Hi All,
    We are using SAP 8.8
    how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
    i.e.
    Our GRPO has freight 5000.
    On pressing COPY FROM button in A/P invoice we selected that GRPO
    On Pressing Customize button
    Items in the GRPO appear
    We selected all items and press next
    Freight appears
    We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
    After this OUR GRPO and freight remains
    Guidance in this is really needed as we want to tally stock
    Thanks
    Malhaar

    Hi Malhaar......
    Does it happen all the time like this reversal of entry?
    Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
    So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
    All the Best
    Regards,
    Rahul

  • Like so many others I have not been able to access or send emails with iCloud now loosing business. Not good enough and lack of info from Apple is also not good enough!

    Like so many others I have not been able to access or send emails on iCloud.  This is now loosing me business! Not Good enough Apple and your lack of information is poor customer service.

    Unfortunately, Apple does not yet allow merging of Apple ID's. if you were once using [email protected] as your Apple ID then there is no way to link that ID with the new one to avoid losing the previous data under that old ID. You will have to either go back to using the old ID to save the old data or just keep both, which you arfe allowed to do.

  • Unable to close Goods Receipt PO with foreign currency

    hi all,
    When we tried to close Goods receipt PO done in June-08 using Euro currency(Data-->Close)
    System is throwing error message
    "No matching records found  'G/L Accounts' (OACT) (ODBC -2028)  [Message 131-183]"
    What might be reason for error message ?
    As we already did manual JE to reverse Goods receipt PO.
    Expecting you all valuable replies.
    Jeyakanthan

    Hi,
    Define the Goods clearing account.
    When closing a Goods Receipt PO manually B1 will post to Goods Clearing.
    Hope it helps.
    Jesper

  • HT201250 I have thousands of pictures on my Mac.  If something happens to my Mac I don't want them lost.  I do time machine back ups to an external hard drive once a week.  Is this good enough for making sure my pictures don't ever get lost?

    I have thousands of photos on my Mac.  If something happens to my Mac obviously, I don't want to lose the photos.  I do Time Machine back ups to an external hard drive once a week.  Is this good enough to make sure my pictures don't get lost?

    tgs6164 wrote:
    I have thousands of photos on my Mac.  If something happens to my Mac obviously, I don't want to lose the photos.  I do Time Machine back ups to an external hard drive once a week.  Is this good enough to make sure my pictures don't get lost?
    Purchase a couple of these when they go on sale.
    Start burning all the photos onto DVDs. 
    At least you'll have all your photos if your computer, time machine or any other backup you use goes bonkers.

  • IBook G4...Video Card good enough?

    On the 14" iBook, is the ATI Mobility Radeon 9550 with 32MB of dedicated DDR SDRAM good enough to be handle Photoshop CS2, and other high-end graphics software? I'm looking at getting an iBook for Graphics creation and other Media, but I'm not sure if the 32MB will be able to handle it. Can anyone help me out here?
    Also, Can I get the Video Card upgraded at a later date? Incase I buy it, realize I need a better card, can I go out and buy one or would I have to get a whole new system?

    As long as you are talking about 2D graphics which photoshop, illustrator, etc. are designed to handle, 32 MB of Vram is plenty. Even 8 MB of Vram would do the job. I have been working for years with photoshop on a power Mac 7600 with 6 MB of Vram.
    3D graphics call for a lot of Vram, especially in up to date games. The latest iBook graphics card also supports core image technology.
    Peter

  • Why maps are not good in ios 6?

    im using iphone 4s and it was previosly having operation system ios 5 and maps was too good in that but now in ios 6 im very much disopointed bcoz there is showing no location but only the street names thats it... And nothing... Whenever i search any location near my place to find direction there are always two error msges that "direction cant find out between these locations" and "no location found" . This problems was not with ios 5.1 .

    You may find plenty of answers here :https://discussions.apple.com/thread/4311003?start=0&tstart=0
    Apple maps is a poor replacement for google maps - but we are hopeful google will release an app soon

  • Is (4770 3.5 i7 qouad core 8 mb cach) good enough for premier and after effect?

    Hi guys,
    am buying the new imac 27" with its maximum features: 32 GB, 1 TB ssd, NVidia gtx 780 with 4GB, but I am worried about the cpu (4770 3.5 i7 qouad core 8 mb cach) is it good enough for premier and after effect?

    Thanks John, but I've already read that page. I have just a simple question about the performance of "4 core" and "6core" if anyone had already tried both of them.

  • Is the iPod touch camera good enough to use Scanner Pro?

    I'm thinking of downloading this app but I believe it's designed for the iPhone. Is the camera on the iPod touch good enough to scan documents? I mean, I don't expect a perfect scan but if I scan a regular sized page is it readable?

    I do not recommend this. While the camera is perfectly capable to film HD movies, it strangely is crappy when it comes to Pictures.
    The iPhone 4 has 5Megapixels , the iphone 4s has 8MP and the iPod touch ( current version is still the 4g model ) has 0,7MP.
    For snapshots ok, but not for OCR/Scanner purposes.

  • Is the new macbook's performance good enough for me?

    Hi,
    I didn't see any topic for the new MacBook, so I just put this question here, hope you people don't really mind, sorry for that.
    My plan for next couple years on was to build a PC by myself, and buy a new laptop that have a nice design but can deliver enough performance for my need.  Here is what I was thinking about.
    Sometimes I need to do something hard and intensive, also need playing video games for fun, which these are not quiet often.  Which is exactly why I want to build a desktop PC for.  Other times I need to use GIMP and I want to learn programming, knowing to use commands, or creating something new just for fun, also playing games that is not very intensive on performance (Minecraft, Left 4 Dead 2, GMOD(which could be intensive sometimes)).  But most of the times, I am just taking to my friends on internet, watching videos, or making a document maybe checking e-mails.
    Consider about that, my laptop will be the primary platform, and only uses Desktop PC for heavy works.  It might also save some money for electricity :-)
    My current Dell Inspiron 3000 was good, but sometimes I thought the N3530 was under-power, that does not benefits me on performance.  I have a mid-2012 MacBook Air from school which is faster, and is more than enough to do schoolwork and web broswing. The new MacBook I checked was pretty impressive and I like that design, but a lot of people have argued that performance, afraid that performance could only do light tasks.
    These days I see the report that New MacBook was on par with mid-2011 MacBook Air on performance, so I guess it could benefits me.  If the performance is good enough, I will go with this one, regardless about price-performance thing.

    Think of the new Macbook as a powerful iPad that can run OS X.....is that powerful enough for you? Sexy as they are, and I want one too, they're just an entry level computer.

  • Is my laptop good enough for adobe premiere cs6?

    I wish to learn video editing, especially adobe premiere. I have copy of cs6 and noticed that my graphic card does not appear in the Adobe list so wanted to know what you think about my laptop before considering if I have to buy another one. My dell laptop is a core i7, 8gb ram. 2.5ghz with Intel hd 4000 graphic card.
    Does this suffice for pro stuff? Is this good enough to learn to professional level or should I deep in to my savings and spend cash to buy a new lap top.
    Thanks

    Premier Pro is a professional level program with serious ability to handle pro levels of work, including handling many advanced video codecs.   As Bill has mentioned, simpler codecs like AVCHD at 1080P CAN be handled on a newer I7 laptop with a few upgrades...OTHER , more demanding codecs at higher resolutions may require more "horsepower" and hardware, usually found in a desktop computer. So, much depends on the TYPE of material you are planning to edit and the COMPLEXITY of your timelines and workflow...how many layers, how many effects , etc. There is much to learn, before buying any hardware, right here on this forum and over at the PPBM7 website. Other sites can confuse newbies with bad and erroneous information.  Contributors here like Eric Bowen and Bill Gehrke have provided very valuable and correct information regarding appropriate hardware for PPro. You can learn a LOT by reading the results they have posted in testing various hardware configurations with PPro.
        Bill and I both have had success using a newer gaming laptop from Asus for editing 1080p material....the G750JW. That model is a little older now,but, well worth it at the time I bought it last summer refurbished for $850, ( normally $1,300). I had to add system memory...the original 8GB was FAR too little....up to 24GB, which works well. The laptop has 2 internal hard drive bays....which is important. I placed a Crucial M500 SATA III SSD in each bay to provide good performance. The original single drive that was supplied was USELESS....it was a slow 5400rpm HDD not capable of use for video editing...you MUST have at least two separate drives at a minimum to run PPro....OS,programs and Windows page file on one drive only....all the rest, ( video files ,media, previews , and cache files), on the second drive. Even 7200rpm HDDs have trouble keeping up with the demand of multi-track editing....SSDs provide WAY better performance and are worth the price difference., if you can afford it.
         If you MUST use a laptop and cannot consider a desktop, consider the following :
    1. The current version of Adobe CC 2014 PPro is FAR better in performance while editing...MANY important updates have been made....CS 6 is getting a little old, and out of date...better to use the current version for MANY reasons.
    2. The laptop will ALWAYS need to be plugged in while editing...PPro will be throttled if you try and use it on battery, no matter HOW you set the power options.
    3. A good starting point for a laptop would be to get at LEAST what Bill and I have,or, BETTER.   That means a Windows machine, running Windows 8.1, having an Intel 4700HQ i7 CPU, or, better.  System memory, ( including your own upgrade , if necessary) of at least 24 GB....preferably 32GB. An NVidia discreet graphics card, ( NO AMD ), the 765M, or, better. Drive system....this is IMPORTANT....this is the one area where many users have a "bottleneck". Your "C" drive should be a fast SATA III SSD with the correct controller and type of flash memory for handling video.  Only the Crucial M550,or, the Samsung Pro series are recommended....the Crucial is cheaper and only slightly behind in performance. Either one BLOWS AWAY a conventional HDD.....transferring data read and write at almost 600MB/sec. vs. 130MB/sec. using the best HDD. Your second internal drive should be ANOTHER of the recommended SSDs. You COULD use a larger capacity 7200rpm HDD,but, its slow performance can slow things way down. This means having a high speed external port is also valuable...Thunderbolt is better than USB 3, in that regard. External drives can be used to backup your "D" drive and other tasks. Finally, a 1080p screen is a MUST to see the whole user interface of PPro....17.3" is better than the smaller displays, which are hard to see. You can ALWAYS hook up an external display, like I do, to GREATLY improve the editing experience .
    I hope all this helps !!!...good luck !!!

  • Is 96 kbps good enough for iTunes Match?

    I have a pretty large music collection (20,000) but in order to save space I converted it all to 96 kbps. My question is whether or not that is good enough for iTunes Match? I've seen some people who haven't had any problems with 96 kbps but Apple says that it has to be above 96 kbps. I just want to know which one it is.
    Thanks

    No. 96 Kbps songs are not supported by iTunes Match.

Maybe you are looking for

  • Iphone 5 won't sync to Itunes.

    I have the most recent Itunes, OSX and Iphone 5 software. When I try to conntect my phone to Itunes I can hear the audio tone and the phone vibrates but when I look in itunes the phone portion in the top right continues to spin and doesnt sync. It's

  • Reg: Using F4 in OO ALV

    Hi Friends, I have a doubt using F4 in OO ALV. I have searched this problem in the forum but unable to find a solution. The scenario is i have implemented two ALV grid using OO. From the first ALV when i double click a second ALV is shown. After i ha

  • Export/import of an  ABAP query

    hi i wana export a query from one client to another. then change it and again import the new one. Please guide me 4 that. As i wil b exporting from production, matter is sensitive. so please provide me the detailed description. thx in advance. will a

  • LCD Screen (not working)

    Hi, I have blackberry curve 9300. i purchased it 4 months ago (sep 2011) after 3 months i am having problem in screen (it goes all white).  as it is in warranty so blackberry service center replaced it, now after one month again i am having same prob

  • Importing Keynote slides into Pages

    I'm new to a Mac. I'm doing a copy and paste of Keynote slides into a Pages document. The quality of the slide image is very poor when printed. I've done this many times before in Windows (with PPT and Word) and the quality is very high. I thought it