Maps loader doesn't start from my PC Suite

I just updated the firmware on my 5800 and tried to start using the new navigation software.. it complained that I have old maps, so it deleted them. I updated my PC suite as well as the Map loader software. Now that I tried to start the Map loader from PC suite, it will only jump to a Nokia maps site and doesn't start. The previous version worked ok, but I guess it only gives my phone maps which are not supported. I've tried rebooting, reinstalling, checking updates...
Any suggestions how to get the Map loader working or the maps to my phone?

Hi. Go to http://europe.nokia.com/explore-services/ovi-maps/downloads-and-services ,  and download the Nokia map loader.
If this post was helpful, thank me by clicking the Kudos! star.
If you want to thank someone, just click on the blue star at the bottom of their post

Similar Messages

  • Local OC4J instance doesn't start  from oracle developer suite 10gR2

    Local OC4J instance doesn't start from oracle developer suite 10gR2

    You might also wish to consider posting your question here:
    <br>
    Forms
    <br>
    OC4J (maybe)

  • Map Loader doesn't start

    Tittle says it all.
    When I try to open Map Loader it gets stuck at the black loading screen. I tried to reinstall it but it still doesn't work.
    I use windows vista.
    So if somoene has a solutien for my problem, please post it.
    I own a nokia N82 but I don't think that has anything to do with the problem.
    Thx

    No "Private" file on my N95 either, and tried all the other tips, to no avail.
    I've lost count the number of times I've deleted & down-loaded & repaired this application, and it still doesn't work!! Just sits there, blankly staring at me, blinking "waiting for device"...
    One of the main reasons I purchased this phone was to be able to download maps onto my computer - AND IT DOES NOT WORK!!!
    What is going on Nokia? Forget all the fancy flash videos, showing us all the fantastic things we can do on our phones and make your damn software work! AAARGH!
    And BTW, Nokia you may have crammed a lot of tech into your phone; it may do a lot of things, but mostly, very badly.... rubbish camera, terrible mp3 player, etc.
    Right, I have now wasted about 8 hours of my life trying to make this pile of rubbish work, and if i don't throw it out the window first, it's going straight on ebay!
    Gets coat and heads for nearest iPhone shop.......
    SORT YOURSELVES OUT NOKIA - IT'S JUST NOT GOOD ENOUGH!

  • I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?

    I record some information to some slides but the presentation doesn't start from the 1st one but from the one I started the recording. What should I do?
    Also, can I use music as backround to some of the slides, not to all of them as I'd like to play videos on the others?

    I have reinstalled the drivers. I watched it install the realtec and cirrus drivers. Hovering the mouse over the speaker icon says 'speakers: HP'. They are actually 'Creative'. 'Properties' indicates 'IDT High Definition CODEC' and 'This device is working correctly'.
    Driver details gives 'c:\Windows\system32\drivers\dmk.sys'.
    There is still no sound, although the little level meter on the control shows a green bar rising and falling.
    Obviously, it thinks it's working, but there's no connection to the speakers. They're not muted, either. I checked that too.
    Any other ideas?
    Thanks.

  • Config Tool doesn't start from the application list

    Hi all,
    I have installed Planning, EAS, and Workforce on a server but when I go to configure the tools, the config tool doesn't start from the page where you select the applications to configure. Instead, it starts with all the apps listed with the message: "You have selected the above apps to configure" and it has a Back button but it doesn't work, and it has a Next button and when I press it, it says Done.
    I need to configure the database and deploy to the application server.
    The Shared services is on a different server and is up and running. Essbase is on a separate server and that's up and running.
    I am working with 11.1.1.3 32 bit applications on a 64 bit Windows OS.
    If you have run into this, please let me know what am I missing?
    Thanks

    Hi
    First of all I couldnt get your problem as in your query description you have written "sometimes the video doesn't skips a couple of seconds from the beginning even though the value of NetStream.time property is 0" which is contradictory with the query title "Video doesn't start from the beginning".
    But anyways I think you should check ns.time in Play.Start there you should get always 0 but in Buffer.Full there may be the case that ns.time is not 0 but has some value but that value is very small less than 1.
    If still you have issue please clarify your problem then probably I will be able to answer your query.
    Regards,
    Amit

  • Map Loader doesn't work at all!

    I have read on the forum that you can load down maps to your N95 with Map Loader to avoid traffic costs.
    I failed to do it regards many try.
    I have a HP PC with Vista Business. I begin with upgrade of PC Suit on it (6.84) and I updated Maps software on N95. I downloaded Map Loader from Nokia Site (1.2) and started it. I get a message that I should use GPS once before I use Map Loader. So I did it and drive a bit of road with it. It worked pretty well, I didn’t try voice guides yet.
    Thereafter I connect N95 by USB cable in memory mode to my PC and started Map Loader. I get the warnings screen as usual and after I choose OK I get error message, something like that: Unexpected error occurred, sorry for inconvenience, try again later!
    I tried all I could without success, please help before I’ll get creasy :-)
    Piko

    01-Oct-200709:21 PM
    selintra wrote:
    Read the maploader error message more carefully!
    You simply have to put your phone into the correct mode.
    Connect your phone and select mass storage (NOT PC Suite). Start map loader and it will download direct to your card.Message Edited by selintra on 01-Oct-200709:22 PM
    Thank You for your concern!
    I have read very carefully the error message, be sure of it. The problem was that when I connected my N95 via USB I get the choice: PC Suite mode or Mass storage mode and I choose Mass storage mode, precisely as you have suggested it. But it did not work! I was frustrated as I said before.
    But it says DATA TRANSFER MODE, not Mass storage mode, doesn’t it?
    I red the other post in this forum which describe how you put your USB connection port on your phone in to this mode.
    Go to Tools > Settings > Connection > USB > USB mode = Data transfer
    I did it and EUREKA! It works  And more! Now when I connect my N95 to USB port it ask me if I want connect it in DATA TRANSFER mode or not!
    I do not know why it didn’t do it before, but that was my problem!
    Piko

  • Power Mac 7600 doesn't start from Mac OS 9.1 CD

    I'm trying to boot from a Mac OS 9.1 CD on a Power Mac 7600 I'm trying to bring back to life
    but it appears the blinking question mark. I've tried using the "C" command but it simply doesn't boot.
    Any ideas?
    Thanks for any help

    One of my favorite pre-G3 Macs! I have one that runs great.
    ---First, has anyone pulled/replaced/moved RAM modules? My experiences with several 7600's at work back in the 1990s was that the RAM needed to be matched in order in the slots and by size regardless of what the specs and several third-party tech reviews say.
    There are eight RAM slots in two groups (of three and five slots) separated by an offset slot for a cache module You should see ID codes on the logic board by each slot: A1, A2, A3, A4; and B1, B2, B3, and B4. You want to load the slots in this order: A1, B1, A2, B2, etc, and match the module size so modules of the same size are paired. My 7600 has this pattern:
    A1: 128MB        B1: 128MB
    A2: 32MB          B2: 32MB
    A3: 16MB          B3: 16MB
    A4: 16MB          B3: 16MB
    So, if modules don't match, match them and try again
    Pairing RAM in this model gives a significant performance boost; the data path goes from 64-bit to 128-bit.
    ---Is the OS9 disk a full retail install disk or a gray one that came with a newer Mac? That could affect startup, Some disks for much newer Macs may not start a pre-G3 Mac.
    ---If the commuter has been off wall power for a long time the PRAM battery is likely deader than Yorick. That could affect startup from the hard drive but should not be at play when starting from a CD.
    ---Another issue  that affects old computers that have been stored and moved around is loose cards. Make sure all card and modules are fully seated, especially the processor card.
    Anyway, those are some things to consider. Keep us posted!

  • Map Loader doesn't see my phone

    Hello.
    When I connect my N95 to the PC via USB (in PC Suite mode) and start Nokia Maps Loader program, it just keeps popping "Waiting for device"... Obviously it doesn't recognize my device...
    Why?
    Thank you.

    Thanks everyone for the tips. There are a few gaps in the advice however for novices like myself. To fill these in :
    1) You must have a microSD card for the maps loader to work, minimum 2Giga (Nokia maps are by continent and heavy files : 1.3G for Europe or America). You may even find that the Mapsloader application says there's not enough space on your 2Giga card, in which case you have to increase the memory allocation within the maps application on your phone - Maploader will tell you where to find this.
    2) The "data transfer" mode everyone talks about is in the message which pops up in the phone when you connect it to a computer with PC Suite installed, not on the computer itself or in the PC Suite application.
    3) You must have the Maps application activated in the phone before you connect to the computer for MapLoader to recognise the phone.
    4) Upload overnight. The connection is slow, a couple of hours for Europe or America.
    Good luck !

  • Load plan not starting from point of failure in obia 11

    hi,
    I am using obia 11..1.1.7 & once load plan is started. few session are failed due to duplicates. After removal of duplicates, once i start load plan from configuration manager. It is starting again from start not from point of failure. I tried restarting load plan from ODI studio also from load plan & scanarios too but it again started from start not from point of failure.
    Can someone explain how to use ODI start from point of failure feature in OBIA.
    Thanks,
    Paresh

    JamesW wrote:
    That's exactly that. Shutdown the database. make the correction in the PFILE, started the DB using the PFILE and then created a new SPFILE .. Restarted the DB (using the SPFILE), restated the upgraded assist.. its not at 9% and running
    Pesky Oracle Thanks guys for your help
    FWIW, and for your future understanding, you didn't actually have to *start* the database with the pfile in order to create the spfile.
    In this example, I don't even have a database named fubar ...
    oracle:fubar$ pwd
    /u01/app/oracle/product/11.2.0/db_1/dbs
    2013-08-15 10:52:29
    oracle:fubar$ ls -l init*
    -rw-r--r-- 1 oracle oinstall 2851 May 15  2009 init.ora
    -rw-r----- 1 oracle oinstall   35 Jan 31  2013 initorcl.ora
    2013-08-15 10:52:36
    oracle:fubar$ ls -l spfile*
    -rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
    2013-08-15 10:52:39
    oracle:fubar$ export ORACLE_SID=fubar
    2013-08-15 10:52:48
    oracle:fubar$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Thu Aug 15 10:52:53 2013
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Connected to an idle instance.
    SQL> create spfile from pfile='init.ora';
    File created.
    SQL> exit
    Disconnected
    2013-08-15 10:53:05
    oracle:fubar$ ls -l spfile*
    -rw-r----- 1 oracle asmadmin 1536 Aug 15 10:53 spfilefubar.ora
    -rw-r----- 1 oracle asmadmin 2560 Aug 15 10:47 spfilekilroy.ora
    2013-08-15 10:53:07
    oracle:fubar$

  • Macbook Pro doesn't start from internal disk. How to?

    Hi.
    My Macbook doesn't startup. I tried to repair it but it isn't possible and now I need to do one last backup copy before format it. But it doesn't pass from the grey apple screen.
    I've checked the S.M.A.R.T. and it is OK. What else can I do to start from the internal disk on last time?
    Thanks.
    Best regards,
    Telmo

    Hi. Yes, I did. It goes on and on with the grey apple screen.
    I just need it to boot one last time to save one Word document that I didn't had the chance to backup.
    The internal disk appears on the disk utility when I star from the install disk and I select it to boot but when restart nothing happens.

  • SQLplus doesn't start from batch when using host comand

    Hello.
    We have a form to export some data from old (7) database. For that we use batch file that runs sql script.
    There is button in form. The code on trigger looks like:
    declare
         HostString Varchar2(50);
    Begin
         HostString := 'C:\Path\File.bat';
         Host(HostString);
    end;
    That batch file calls another batch file:
    c:
    cd c:\Path
    call NewFile.bat >> Data.log
    And in NewFile batch we call sql script like:
    c:
    cd "c:\Path"
    set ORACLE_HOME=c:\Oracle\Path
    C:\Oracle\Path\BIN\SQLPLUS.EXE user/pass@db @C:\Path\Script.sql
    @echo End
    exit
    In that script the code looks like:
    spool c:\Path\File.txt
    desc table;
    spool off;
    exit
    If we run first batch in cmd everything works. When we use forms, form is working forever, freezes.
    And Data.log file looks like:
    (14:53:48,14) >c:
    (14:53:48,14) >cd "c:\Path"
    (14:53:48,14) >set ORACLE_HOME=c:\Oracle\Path
    (14:53:48,14) >C:\Oracle\Path\BIN\SQLPLUS.EXE user/pass@db @C:\Path\Script.sql
    Here it freezes, log file is locked.
    We are using forms 10 on AS 10. But we must use SQLPlus 8 to connect to old database (7) in that case.
    Maybe this is the problem?
    Any idea why this doesn't work from forms, but works when run manually from cmd?
    Thanks.
    Message was edited by:
    DejanH

    U didnt mention version of forms and whether running in client server or web.
    Incase of web note that host will execute on application server and hence u need to use webutil_host.
    If u are on forms 6i/client server forms try invoking calc using host. If it works fine then u may have to use the code host('cmd /start c:\orant\bin\sqlplus.exe')
    Best Regards
    Rajesh ALex

  • Nokia Map Loader doesn't recognize the 5800XM

    Hello, I have a 5800 Xpress Music and I have downloaded some maps to it from Nokia Map Loader.
    Now it is not working and in Nokia Map Loader it waits for the phone (it does not recognize it) when I connect it through USB.
    In Nokia Ovi Suite it says that the phone does not work with Nokia Maps or that the maps and voice guidance and corrupted.
    I went to make a trip with my car and the voice guidance worked properly.
    I tried to download again the Map Loader and it installed the “maps_installer_3.03_1”. And Nokia Map Loader 3.0.28.0.
    I have the firmware 50.0.005 downloaded too.
    What can I do to download some more maps to my 5800?
    I have looked for solutions in the forum but I did not find them.
    Thanks

    It seems that there is something wrong with the files in your phone. Run a disk check of your card on your PC. It may fix the problem.
    If it doesnt, you will have to manually delete the voice and maps on your phone and recreate the folder structure.
    Delete the cities folder and qf file on your memory card. Turn off phone and remove battery for 5min. Reboot phone then open maps application. Wait for it to recreate folder structure. Then reconnect to Ovi Suite and redownload the maps.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • My harddrive is put in other computer which doesn't start from my org harddrive, but from its own harddrive. No addons, bookmarks or passwords are showing up

    My original harddisk is now called "G" (with partitions H&I). System not able to start from "G". Starts from "C". All original settings and programs still on G. How I get my addons, bookmarks or passwords again in Firefox?
    Message sent from different comp, so FFversion and pluginsnot right

    See this: - http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

  • The WF doesn't start from FV50

    Hi all,
    I need to link a custom WF to FV50 tx when a G/L document (type Cost Adjustment) is saved as completed and I was sure the right B.O. was FIPP, but this WF doesn't start even if the start event is FIPP.completed (active) and there's a start condition in SWB_COND tx about document type = CA.
    Do you know there's another B.O. to use?
    Thanks.
    Angelo

    Thanks Ute,
    in fact the BO is right and the workflow now starts, but there's a problem about the start event: if I create a new document via FV50 and I save as completed directly the triggered event is FIPP.created (I expected "completed") while if I park it before and then I save as completed I obtain the 2 events FIPP.created and completed. That's why my WF didn't start.
    I'm using R3 4.7ext2 and I didn't find an OSS note about this issue.
    Any idea?
    Thanks.
    Kind regards.
    Angelo

  • Video doesn't start from the beginning

    Please tell me there is a setting on the iPod classic to always start a video from the beginning of the video??!?!?! I am using the iPod classic for video projection.
    E.g.: I play video #1 until, say, 3:00. I select menu and go to another video or a song, a photo, whatever. I go back to video #1 and it starts at 3:00! WHY?
    I want iPod Classic videos to ALWAYS start from the beginning.
    Please tell me there is a setting for this.
    thank you

    I have good news for you, (compared to your other post!).
    Select the video in iTunes and click on *File/Get Info* and look on the Options tab. Turn off the tick in *Remember playback position.* You can bulk select some or all your videos to do this.
    Phil

Maybe you are looking for