Maps missing from "phone view"

I am using Nokia Suite to update the maps on my Nokia 5800. But when I click on the section which should list maps on the phone, only the voice guidance files show up. I have confirmed that the maps are on my phone (for example I just uploaded the map for Paris and I can find the Eiffel Tower) but neither the existing maps, nor the newly uploaded maps show up in Nokia Suite.

You may try deleting the 'Cities' folder and the 'qf' file from the phone. You may do that by connecting your phone to PC and then thru' Windows Explorer.. Now, disconnect the phone and then Open the Maps application on the phone and after about 15-20 seconds close it. This will recreate the Folder structure. Now connect the phone again to PC and thru' Nokia Suite re-download / re-install the Maps that you want ...

Similar Messages

Column name missing from a View

I tried to create a view based on another view but the column header is missing from the view.
The view was create with the following statement:
create view TEST.MDQ_VU_TEST2 (FXT_BANKCODE, FXT_FCY, FXT_FXINDICATOR, SUMFXT_FXFCYAMT, SUMFXT_FXLCYAMT, CASESTMT) as
SELECT MDQ_VU_POS.FXT_BANKCODE,
MDQ_VU_POS.FXT_FCY,
MDQ_VU_POS.FXT_FXINDICATOR,
MDQ_VU_POS.SUMFXT_FXFCYAMT,
MDQ_VU_POS.SUMFXT_FXLCYAMT,
ROUND( CASE WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY = '1')
            THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXFCYAMT = 0)
                      THEN MDQ_VU_POS.SUMFXT_FXFCYAMT
                      ELSE MDQ_VU_POS.SUMFXT_FXLCYAMT / MDQ_VU_POS.SUMFXT_FXFCYAMT
                 END
            WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY <> '1')
            THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXLCYAMT = 0)
                      THEN MDQ_VU_POS.SUMFXT_FXLCYAMT
                      ELSE MDQ_VU_POS.SUMFXT_FXFCYAMT / MDQ_VU_POS.SUMFXT_FXLCYAMT
                 END
            ELSE 0
       END, MDQ_VU_POS.CCY_FXDECIMAL_PLACES) CASESTMT
FROM TEST.MDQ_VU_POS;The view is created successfully, but the last column name does not appear as show below
View TEST.MDQ_VU_TEST2:
Columns:
    FXT_BANKCODE                    VARCHAR2 (12) INLINE NOT NULL
    FXT_FCY                         VARCHAR2 (3) INLINE NOT NULL
    FXT_FXINDICATOR                 VARCHAR2 (1) INLINE NOT NULL
    SUMFXT_FXFCYAMT                 NUMBER NOT NULL
    SUMFXT_FXLCYAMT                 NUMBER NOT NULL
                                    NUMBER NOT NULLAnyone knows why TimesTen unable to get the alias name for that particular column ?
Thanks is advance.
Regards,
Gary

Thanks Gary - I tried it on 11.2.2.2.0 64bit on Linux x86/64 but it again succeeded for me. That's probably due to my mocked up base table versus your real world definition.
Would you be able to open an SR so we can investigate this properly? We'd need:
ttCapture off the instance (so we get the correct DSN definition)
base table and indexes SQL definition - a ttSchema taken off the datastore would suffice.
Thanks.

Text missing from vertical view- Ibooks Author product

I made a book in ibooks author. In the horizontal view, it looks perfect. In the vertical view, large chunks of text are missing from the book semi at-random. If I attempt to insert the missing chunks of text into the vertical view, then when I switch back over to the horizontal view, I just get repetition where the text shows up twice. That means it is impossible to make the book look good both horizontally & vertically. Any idea how to solve?

Remember, layout in landscape and edit content in portrait.
Check in both.
If you like, you can disable Portrait in the Inspector.
For details on working w/iBA, see the built in Help and
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

Mapping node from UIcust &View throws dump in result

hello all,
Need ur urgent help!!
I hav already posted one thread bout dis but didnt got any response.... So doing it again
Not able to map UICust node to View.Till UICust the app works fine but as i map the node to View........ Error comes of contact administrator without any exception
Contact Administrator error is coming after mapping node from UICust with View.
Its not happpening in case of 1 single attribute but while mapping the node this error is encountered even if that node consists of single attribute.
Urgent help required....Kindly help
Thanks n regards
Mandeep

Hi Siva,
4 attr under 1 node in modal node and same i craeted in value node in uicust. but even if i try to map the replicated value node in uicust and map dat to value node of view. still its showin dump (Contact administrator wid no exception)
I hav reopnened the project....... rebuild. it doesnt show any error.... as soon as i go for mapping in view and uicust . it starts throwin dump
Thanks n Regards
Mandeep

Camera lens missing from phone

I've got iphone 5. And the problem is that the camera lens is missing from back. My phone is under warranty. Will it be replaced or what..plz tell me

I guess it would depend upon why it's missing and if your AppleCare is still active.
If it is missing due to acciddental damage (drops, etc), then that would be considered an "Out Of Warranty" repair, and it would cost you about $269 USD (unless you have an active AppleCare+ where there are 2 "incidents" where you can get your phone replaced for $49).
If it is due to manufacturing defect, then it would be covered under the 1 year Mfr Warranty, so if you have proof of purchase, or have it registered with Apple, then it should be covered for a free replacement as long as you are within 1 year of the device's purchase.

Group Chat missing from Phone/OK on PC

Hello, I have lost one of my group chats from my Android phone which works fine on my Desktop and Surface PCs. Nothing I have done seems to recover my access to it. I uninstalled Skype on my phone, powered the phone off, powered it on, reinstalled Skype. That didn't work. Uninstalled Skype again, checked to make sure there were no Skype files left behind. Didn't find any. Rebooted the phone again. Reinstalled Skype a second time. That did not resolve the problem either. When someone types something in the Group Chat it shows as a notification on my phone. If I select the notification it will show me what they said, but the group chat name does not show up and instead it shows as "Person Name, ..." and while the text entry box shows up along with the arrow, I can't select it. Attempting to type anything in the box doesn't work since it won't even pop up the keyboard so I can type. I can favorite it, but then it will still not show the chat name, will not allow me to send messages, will only show one participant in the chat (not me), and will not retain a history of any of the messages that come in (once they are viewed from the notification they are lost). So there's no effective way to interact with it. Since it is my chat of which I am the administrator, I can't add/remove myself from the chat either. Chat starts with a name=19 which I am told means it is a cloud based chat. I started it roughly 8 months ago maybe? Phone: Samsung Galaxy Note 3Model Number: SM-N900VAndroid Version: 5.0Network: Verizon Wireless (also use it on my Home WiFi)Skype Version: 5.7.0.13054 Additional Note: I am missing all group chats. I had one that I hadn't created so I asked the moderator to re-add me after I left it using my PC. They could re-add me and I could see the chat on my PC but it still doesn't show up on my phone. My Skype IMs to certain people are also very delayed. I just sent a couple of IMs to the admin of that chat and they are just sitting there dim grey and pending. I can communicate fine with other individuals. Yet the same person, I can communicate without delay from my PC.

Hi, I've had this exact same problem myself. Skype 5.8 on Android 5, Lolipop. No amount of resetting or uninstalling will help. Symptoyms include, but are not limited to: - Messages always dimmed, even though people can see and respond to them- Get notifications that show up in the system and show real messages, but cannot be seen at all inside Skype- Complete loss of all Skype history; everything becomes completely invisible, as though you never had those conversations- Complete inability to use group chats whatsoever; only one person will show should you join them, and you won't see any messagea from anybody at all (whether posted before or posted while looking at it)- Occasionally, some pictures (whether profile photos, emoticons, or images to the Skype app itself, including the logo) don't load at all. This was a _huge_ break, it's literally bricked Skype. The application is completely worthless now; what kind of a chat platform can't even deliver messeges? It's an alpha quality release, and I hope the Skype team gets to work on fixing this as soon as possible. I hope in the future it's tested more robustly; these are not subtle bugs, anyone who installs the cersion currently up will find they are no longer able to use te service. Feeling helpless, confused, and very frusterated there's nothing I can do to fix it (and that in all likelyhood, the earliest a patch will come will probably be _weeks_ away, if ever).

Image missing from design view

Hi. In DW CS4 on XP.
I have an image that is missing in my design view from DW. It shows up in the live view, but when I select it I cannot get the option to change the image.
I do not want to change the image in the code. It is not loading my new picture under the same filename for some reason.
I have all the visual aids shown except the first 2 listed: CSS layout backgrounds & box models.
I tired selecting all over the table this page is designed in. I cannot seem to select that picture missing. Right now it is a missing link & usually I am able to click the missing link box. I even tried opening it up in DW 8, but I am not even able to select the box, but at least I see it.
Please help if you can.
Thanks.

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My mail subfolders are missing from the viewing pane, but available from inbox drop down menu. How do I get them back in the viewpane?

After a restart, all of my mail subfolders are gone from the side view pane. I can pull them down individually from the 'inbox' drop down menu. How do I get them back into the sidebar so I can sort mail out of the inbox?

No anti virus software running as far as I am aware, as in I didn't launch any before reinstating the search email function.
I was running a folder repair function on my inbox (which seemed to complete successfully for the emails in the inbox) when I noticed the majority of the mail folders had disappeared.

Topics missing from link view and topic references

I am using RoboHelp X5 and have come across situations where
I have a URL, and all of the topics that link to it do not display
in link view, in the Show Topics References option, or in the
External Topics report. I want to know if there is an easy way to
correct this so I can see every topic that links to a particular
URL.
For example, I have a link to www.adobe.com that is
referenced in the TOC and 5 different RoboHelp topics. After I
initially set up all the links, all 5 topics show in link view from
www.adobe.com. In topic references, the TOC also appears. Then a
few days or weeks later, I try to view the links again, and some or
all of them no longer appear. If I display the link in link view or
right click and select Topic References, it may only show me the
reference to the TOC. If I remove it from the TOC, it no longer
appears as a URL at all. But it is still actually used in 5 topics.
Also, if I know it is linked from topic A, I could go in and edit
topic A and save. Then www.adobe.com will show up as a link in the
URL list again, and topic A will appear again in link
view/references. But I don't necessary know all of the topics that
link to it, and if I am trying to remove it from the entire
project, or change the URL, that becomes a problem.
I hope this makes sense and if anyone can help, I would
appreciate it!
Chris

Repair the broken links, create a zipped backup of the project, then delete the CPD file before reopening.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Export and Print icons missing from report viewer

I'm currently embedding crystal within a wicket application in which I'm making use of the getHtmlContent() method to retrieve the report's HTML. For whatever reason, I'm not able to get either the export or print icons (on the top left side of the viewer). Is this because I'm using the getHtmlContent() method or do I have something misconfigured somewhere? Setting the setHasExportButton(true) and setHasPrintButton(true) on the report viewer object has no effect.
If I run the same report using the generated JSP outside of my application (within tomcat), I see the export/print buttons. I notice the JSP makes use of the processHttpRequest() method. Any help will be greatly appreciated.
Thanks!
Louis

Hi Louis
- The getHtmlContent() method handles the user's request to generate the HTML for the report and returns the HTML as a String.
Note: Either the getHtmlContent method or the processHttpRequest method can be used to handle the user's request to generate the HTML for the report, depending on how you write your JSP. If the viewer's content is displayed more than once, then the getHtmlContent method is more efficient, because the request is processed once and the resulting HTML string can be used multiple times. In this case, you must set the content type of the HTML, as recommended in the table. Additionally, using getHtmlContent sets setOwnPage to false and disables exporting and printing.
- The setOwnPage(true) and processHttpRequest() method should be used if you want the export and print button to appear in the report viewed through Crystal Report Viewer.
Following is the snippet of code which shows you how to use these 2 methods.
//Get the IReportSource object from sesion and pass it to the viewer
     IReportSource reportSource = (IReportSource)session.getAttribute("reportSource");
Create the viewer and render the report -
     //create the CrystalReportViewer object
     CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
     //set the reportsource property of the viewer
     oCrystalReportViewer.setReportSource(reportSource);
     //set viewer attributes
     oCrystalReportViewer.setOwnPage(true);
     oCrystalReportViewer.setOwnForm(true);
     //set the CrystalReportViewer print mode
     //oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
     oCrystalReportViewer.setPrintMode(CrPrintMode.PDF);
     //process the report
     oCrystalReportViewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
Hope this helps you .
Thanks
Soni

"This window only" option missing from Show View Options

Hi,
When trying to create a background image for a disk image for distribution, the radio button for "This window only" is missing. I read instructions on the web on how to set the background image, make the file invisible in the Terminal. It will work on the 10.6 system that created it, but will not show on another computer. (Mac OS does not matter)
I eventually had to do this on an old system with Tiger 10.4 . There when looking at View Options, the radio button is there labeled 'This window only' . I created the disk image and voila' it will keep the background image for any other computer.
So my question is - Is there a keyboard combination to set this? This option is missing in 10.5 and 10.6 . This is really frustrating.
TIA

I'm experiencing the same problem. However, I don't think it's defaulting to an arbitrary colour. Rather, it seems to be defaulting to the exact opposite colour (than whatever colour was selected) in the spectrum.
For example, if I set the background colour of a folder to red, it instead defaults to green (and vice versa). This is consistent for all opposing colours.
I hadn't clued into Crayons being different — thanks!
BlackBook Mac OS X (10.4.9) 2GB memory. 120GB hard drive.

OBIEE Line Missing from Line View

Hi:
OBIEE 11.1.1.6
When creating a line view from two rows of data points, OBIEE will not draw lines between data points when the data points are unbalanced. Here is an example. Let's say product 1 has sales for Jan, Feb, March, April, May and June. And product 2 has sales for only Jan, March, and May. When I create a line view, OBIEE will plot the data points for product 1 and draw a line connecting the data points. But for product 2, OBIEE will show the data points but will not draw a line connecting the data points.
Has anyone seen this before? Any solutions?
Thanks.

Hi Steve,
Please run get-oabvirtualdirectory |fl to ensure the URL (Internal URL and External URL) for OAB has been configured. If the URL is not configured, you can use Set-OABVirtualDirectory command to set the URL for them
Set-OABVirtualDirectory
http://technet.microsoft.com/en-us/library/bb124707.aspx
After that, please restart the computer which has Outlook client installed and test the issue again.
Mike

After Effects Text missing from project view (yet renders)

I am new to the CC but have played with Adobe in earlier versions (mostly CS3). I have purchased some project files from videoden to give me a starting point (I learn best when playing with something that already works, picking it apart and rebuilding). Only problem is, the text is never visible when I work.
When I open the project it says: "the project must be converted from version 9.0 (windows). The original file will remain unchanged" There are no font dependency issues reported. When I open a text layer I can see a rectangle, but not the letters. I read on the forum that the cache can cause problems. I emptied it, rebooted and started over, still same problem.
So it is the project that is corrupt, right? Wrong. Even when I make my own, add Arial (or some generic font like that all systems have) it wont show up on screen either. And even the project I was having problems with, when I render it the fonts appear properly.
Is there some view that does not show fonts in text areas?
I am running 8gm ram, win 7, Lenovo, with After Effects CC

Show us screenshots of your Timeline panel, Character panel, and Composition panel.

Random dates missing from phone after isync

Hi,
I have recently found that some of the dates I add to my iCal do not sync to my phone (K800i). It seems to be a random pattern and I cannot see any difference between the dates that appear and the ones that don't.
Has anybody else had this, or know of a solution?
Thanks
iMac 24" 2.16GHz Intel Core 2 Duo Mac OS X (10.4.9)

Are the dates that are not syncing all in the same Calendar in iCal?
Are the dates that are not syncing before the last clocks change (March) or after the next clocks change (October)?
Backup your Address Book and iCal data by choosing the relevant Backup command on the apps File menu, Then...
Try clicking "Reset sync history..." in iSync prefs
Try clicking on your phones icon in the iSync window, then choose "Reset device" from the "Devices" menu.

Map node from different View Container

hi all,
i have a question about WDA. In case i have 3 view controllers: V_MAIN, V_A, and V_B. This program lets the user to fill out the form on V_A and V_B. V_MAIN has view containers embedded by V_A and V_B.
If i want an application to submit the form by click the Submit button on V_MAIN. The button has an action to send the parameters which fetch from V_A and V_B to do something further.
I've tried to declare the variable by
data: lr_v_a type if_v_a=>element_node.
the system shows an error "The type if_v_a=>element_node. is unknown"
Do you guys have any ideas about this? Please share me then.
Hope you can figure out what I'm saying. Thanks in advance.
Peerasit

Hi...
Use Global Component controller for all the view your using.... so that any time if you want data.... you can access it from the component controller...... try to use always global........
so if you click submit and want to do something further..... you can get the values from component controller and pass it to the next process..... its simple.....
Hope this will help you.....
Thanks & regards
Raja

Maps missing from "phone view"

Similar Messages

Maybe you are looking for