"Maps" not working properly after 10.3.2.440 update.
I rec'd my 10.3.2.440 update Sunday night. Everything seems to be working except Maps. Maps will open, but I get a message on screen like, "Content Unavailable. My Places content is currently unavailable." The map opens, and finds my present position, but I can't search for addresses, stores, or anything else. If I manually type in an address, it may find it, but it won't calculate directions. Any help would be appreciated! D Wells
Hi there! @Dwells2009
Thanks for posting your concerns. I’m sorry to hear you’ve had issues with the Maps app.
I’d recommend trying a soft reset by pulling the battery from the phone for 2-3 minutes.
If this does not clear the issue, you will want to back up your data and factory reset the phone.
For steps to factory reset your phone, please go to http://www.att.com/devicehowto/ and select the make and model of your phone. Once you have done this, locate Troubleshooting in the left column and select the + symbol then click on Reset Device for full back up and reset instructions.
Hope this helps!
Charise
Similar Messages
-
Aluminum Wireless Keyboard not working properly after Firmware update 1.1
Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve -
ITunes / iPhone not working properly after newest update...
iTunes is not working properly after the newest update... It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store. Anyone have a solution or an explanation? I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works. Everything was working fine until iTunes and the new ios were installed. After that it all went to crap. Thanks, Randy...
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
My Iphoto does not work properly after downloading Maverick. How can I fix it ?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
Camera not working properly after ios7 upgrade in iphone 4s
Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problemHave you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music! -
Asha 501 : Whatsapp not working properly after 14....
Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India. -
ESS is not working properly after upgrade from 4.7 to ECC6.0
ESS Scenario in 4.7
4.7 Scenario:
The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
List of Services used to set up ESS:
Sl.No Functionality Service/EWT/URL Name Standard/ Customized Type
1 Home Page PZM3 Standard Service
2 Inbox BWSP Standard Service
3 Calendar BWCA Standard Service
4 Whou2019s Who PZ01 Standard Service
5 CPF Display http://192.168.0.2:7070/omcpf NA URL
6 Payslip Display ZPAYSLIP_USER Customized Service
7 Section 80C PZ88 Standard EWT
8 Section 80 PZ80 Standard EWT
9 Form 16 HRESSIN_F16 Standard EWT
10 Address PZ02 Standard EWT
11 Bank Information PZ03 Standard Service
12 Open Appraisals Not Available NA Service
13 Emergency Address PZ05 Standard EWT
14 Family/Dependents PZ12 Standard EWT
15 Personal Data PZ13 Standard EWT
16 Previous Employers PZ28 Standard EWT
17 Apply Leave WS20000081 Standard Service
18 Leave Overview WS01000109 Standard Service
19 Leave Balance PZ09 Standard Service
20 Loan Application ZLOAN Customized Service
ECC6.0 Scenario:
In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
List of Services would be used to set up ESS:
Sl.No Functionality Service/EWT/URL Name Standard/ Customized Type
1 Home Page PZM3 Standard service
1)this service is not available
2)SAP does not provide any replacement.
3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
4)Given reference of few notes.
5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified to access the services via URL or by OKCODE.
Screenshot attached below.
2 Whou2019s Who PZ01 Standard Service
1)this service Available
2)Not Working properly.
3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
7 Section 80C PZ88 Standard EWT Available
8 Section 80 PZ80 Standard EWT Available
9 Form 16 HRESSIN_F16 Standard EWT Available
10 Address PZ02 Standard EWT Available Only EWT Available. Service needs to be created to access the EWT.
11 Bank Information PZ03 Standard Service Available EWT Available. Service needs to be created to access the EWT.
12 Open Appraisals Not Available NA Service EWT Available. Service needs to be created to access the EWT.
13 Emergency Address PZ05 Standard EWT Available EWT Available. Service needs to be created to access the EWT.
14 Family/Dependents PZ12 Standard EWT EWT Available. Service needs to be created to access the EWT.
15 Personal Data PZ13 Standard EWT EWT Available. Service needs to be created to access the EWT.
16 Previous Employers PZ28 Standard EWT Service Available
17 Apply Leave WS20000081 Standard Service Available, but not working No solution is proposed yet.
18 Leave Overview WS01000109 Standard Service Available, but not working No solution is proposed yet.
19 Leave Balance PZ09 Standard Service Available, but not working No solution is proposed yet.Ya ramakrishna,
Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
Please do the needfull,
Julius -
Smart Actions not working properly after software update
My Razr updated 2 days ago and since then my Smart Actions are not working properly.
I have my Work action set to turn the volume down when I'm at a certain GPS. It shows that "Work" is active, but doesn't turn the volume down.
Also, there are times (since I've owned the phone) that it will not connect to the network after coming off a Wifi Connection without rebooting the phone. I took it into a Verizon store and they did a hard reset, and that fixed it for a time, but it started doing it again.
Any help appreciated.Hi mcclainkb, Let's make sure your phone works as you expect it to! Have you tried removing the Smart Action and setting it back up again? Are your other GPS services working as normal? After the hard reset performed in the store did you install all of the same application that you had before?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport -
Value mapping not working properly
Hi All,
I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
Value mapping 1 -
Context - http://sap.com/xi/XI
SenderParty- SenderSchema
ReceiverParty- ReceiverSchema
Value Mapping table in ID -
Value mapping at field 2 -
Context - http://sap.com/xi/XI
SenderParty1- SenderSchema1
ReceiverParty2- ReceiverSchema2
Value Mapping table in ID -
Source payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Name>rash</Name>
<Surname>sumit</Surname>
<Gender>Male</Gender>
<Grade>E2</Grade>
</Record>
</ns0:MT_VM_Send>
Target Payload -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
<Record>
<Emp_ID>123</Emp_ID>
<Full_Name>rash sumit</Full_Name>
<Designation>E2</Designation>
<Gender>M</Gender>
<Travel_Mode>Train</Travel_Mode>
</Record>
</ns0:MT_VM_Receiver>
Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
Thanks & regards,
Rashmi JoshiHi Rashmi,
The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
regards,
Harish -
Ipad2, safari does not work properly after ios6 update. How do I fix it?
I need help in fixing safari problems after ios6
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7
After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing gamesThis board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help. -
Touchpad not working properly after changing LCD and invertor
Product - HP Pavilion DV4 1318TU
I was having display problems, went through repairer. He changed the LCD, invertor and fixed some issues of motherboard(related display output). After fixing these issues i am facing touchpad issues. Touch is not working properly, and when I use USB mouse its working but after 1-2hr mouse is also not working properly. I connected to external monitor then touchpad is working fine without any issues. Kindly help me and tell me the root cause.
ThanksHey @ashfaque91 ,
Welcome to the HP Forums!
I understand the touchpad and mouse are not working on your notebook after having your display serviced.
It seems quite odd that they would work fine on an external monitor, and to be totally blunt this is something I cant even attempt to explain.
Was this service provided by an HP service provider or was it done by an independent provider?
Try using the notebook in safe mode to see if there is an issue with the display driver causing some kind of wonky issue. Without knowing which version of Windows you are running I cannot tell you exactly how to boot safe mode on your notebook, but you can find this information easily by searching "Safe Mode Windows #" in Google.
Other than this I would suggest getting back in touch with the service provider if the issue started immediately after they provided service to the notebook.
Alternately, you can call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
Applications not working properly after updating t...
After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down.
Has anyone any suggestions or solutions to the problem?
Thanksi updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
Somebody do something!!
I use other devices, and havent faced this problem with any of them after an upgrade! -
Camera led is not working properly after update
After updating to IOS 6.0.1 led is not working properly.
When filming , the led is burning very weak, and when lightsetting is turned to
automatic not at all.Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.
-
Plug and play speakers not working properly after upgrading to Windows 8.1
After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.
@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP
Maybe you are looking for
-
Install FMW11g.. and Configuring ODSM..error unable to create Instance
I am doing installation of Oracle identity management - fusion middle ware 11g ... on OEL 5.4 64 bit I have installed WLS 10.3.2... 32 bit I am now trying install identity management stack.. (OID, OVD, OIF and ODSM).. but i am only configuring ODSM..
-
Best Practices: iPad/MacBookPro synching for video production in education
My organization just bought 14 Macbook Pros and 14 iPads Minis. Our goal is to have students in single-day classes use the iPads to film something, then synch/export the video to a MacBook Pro where they can then edit that video in iMovies. Once that
-
Input Methods changing without permission
Hi everybody. I use a personalized keyboard mapping. I've created it with Ukelele, put it into ~/Library/Keyboard Layouts and selected it in the System Preferences (so only my account can use this layout). Perfect. Now, the issues: If I use the "fast
-
How to connect Forms 5.0.6.0.8 to Oracle 8i?
Please somebody let me know the step by step procedure to create the connection of Developer 2000 Forms 5.0.6.0.8 with the local database(Client & Server both same machine)' I managed to connect to the database using 'SQL Net 8 Easy Config'. My probl
-
Apps not showing since update on 8-26-08
I synced my phone and i lost good programs i paid for. What can i do to get them back? HELP