Maps not working when connected to local-only WiFi network

Just FYI, while I had my iPhone connected via WiFi to the network my Time Capsule created but with the TC not connected to the internet (cable modem down), Maps (on the iPhone) refused to load any new content. Switched off WiFi, everything worked again.
It could be that any app (not just Maps) that required internet connectivity would not work in such a situation. I'll test that tonight.

trimandjen2
Sorry to hear about any trouble with your picture messages! Let's get everything back up and running for you. Is mobile data still turned on when you're connected to WiFi? If so, can you try using the Google Hangouts application for your messaging instead? I'd like to test if this will allow you to receive picture messages even when on WiFi. Keep us posted!
RuthW_VZW
Follow us on twitter @VZWSupport

Similar Messages

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

My iphone 4S is not able to connect to my home wifi network although it easily connects to others. Infact, i have tried connecting another iphone with my home network without any difficulty. So its just my new iphone 4S that is not connecting.

My iphone 4S is not able to connect to my home wifi network (BSNL). It does detect it and even tries to connect to it but in vain. However, it connects to all other available networks easily. Another interesting thing is that all other devices including an iphone 4 easily connects to this home network. So what is the problem with iphone 4S???

There are two ends to a wireless network. Try rebooting your router. Just pull the power for a few seconds and replug. No settings are lost.
(The fact that all your other devices connect to the internet is irrelevant)

Auto Lock not working when connected to Macbook

Ive had my ipod for about a week and I thought auto-lock was working even when the ipod is connected to my computer.
But I just realized that the auto-lock is not working when it is connected to the computer.
Is this normal?
Also when I set the brightness to the lowest setting, the screen slightly flickers intermittently.
Is this normal too?
Thanks

Do you have more than one IDM Server running in your environment? When you are debugging a WF on server A and the scheduler decides (usually after an approval step) to continue running the WF on server B, your debugger connecting to server A wouldnt stop at the breakpoint.
Can you make the debugger stop on e.g. the "start" or very first Activity in your wf? Right after launching it from the form.

Mail not working when connected to a new network

Whenever I connect to the network at work I can't send mail. I can receive mail though. I can't use my airport at work. Could this be the problem?
Thank You
Tamara

Unless your employer has a wireless router and wireless network, you can't use Airport when at work.
Assuming you have a business email account provided by your employer, you can't send mail with your business email account either when connected to your employer's network and internet access at work?

Audio not working when connected to HDTV

I connected my MacBook Pro to my Samsung HDTV LN40D503F6F and also connected an HDMI cable to the TV using Apple mini DVI cable. I tried connecting to both HDMI/DVI 1 and HDMI 2. Video works fine when connected to both the HDMI ports, but the audio didnt work. I also purchased an a 3.5 mm audio to RCA cable and tried switichin between both the HDMI ports but still it is not working. Any solution would be great. Thanks !!!

Hi:
While trying to help you, I was looking along the same lines as you were (I assume).
I did a search by the IDT 92HD73E audio codec and all I could find were drivers for system boards with Intel processors such as the driver you tried unsuccessfully.
I have finally found a W8.1 driver for that codec from a desktop PC with an AMD processor and chipset.
See if this one works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134120-1&cc=us&dlc=en&lc=en...

Find My Phone not working when connected to international service provider

I recently moved from the US to Switzerland and changed my SIM card from one of Verizon's to one of Orange's (Orange is a popular provider in Switzerland). Unfortunately, the Find My Phone feature is now not working, whether I'm connected to WiFi or using data. Does anyone know if the feature only works in the States?

Find My Phone only requires an Internet connection, either WiFi or 3G. Have you tried turning Find My Phone off, wait about 30 seconds or so, then turning it back on?
Also, read here:
http://support.apple.com/kb/TS4006

IChat AV not working when connecting wirelessly thru Netgear router

Ok, I have read nearly EVERY forum out there about this issue, and I have tried nearly everything. I even called Apple. Noone can seem to figure out what the deal is.
I have a Netgear WGR614 v5, and it is connected to a modem that I got from RoadRunner (Time Warner Cable).
My cousin, who has a Mac identical to mine, is set up in the same fashion with a Netgear router.
Neither of us can get a video connection using iChat. When we click the Accept button, it says "Connecting to ...." and then we both get an error that basically says there was a "communication error".
I was informed of an Apple test address that I could test it with. AIM username is appleu3test03. I added it to my iChat buddy list, and clicked on the camera icon, and voila! It connected and I get an iPhone video (which is what is supposed to happen)
So, what EXACTLY is that supposed to tell me???? The Apple test site says that means there is no problem with my connection, but that the issue is on my end somewhere....but I don't understand how that can be.
Anyway, I don't have ANY firewalls on, and it works when I am connected directly with an Ethernet cable.
PLEASE!!! HELP!!
Thanks
Cynthia

Hi arvideo,
OK IS the UPnP on in this device ?
And no Port Forwarding or Services set ?
IS it the only device connected to the internet ? (is there another router or a modem ?)
1:18 PM Sunday; August 12, 2007

HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer. The sound still comes from the speakers. Any solutions?

The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds. The sound still comes from the speakers and is not redirected to the head phone. The port has never worked. Any solutions?

okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
JB

PL/SQL program not working when connect database via SqlNet

Hi,
This is a segment of a PL/SQL program before opening a cursor using input descriptor. It is working fine ( to get the value of unOutputCount ) without connect to a database via SqlNet, can anyone tell me why it is not working ( unOutputCount return 0)while connecting to a database via SqlNet and how to make it work without opening a cursor before DESCRIBE OUTPUT ...?
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'input_111'
WITH MAX 100;
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'output_111'
WITH MAX 100;
EXEC SQL PREPARE STMT1 FROM :psSqlStatement;
EXEC SQL DECLARE CURSOR1 CURSOR FOR STMT1;
EXEC SQL DESCRIBE INPUT STMT1
USING DESCRIPTOR GLOBAL 'input_111';
/* Get count of input parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'input_111' :unInputCount = COUNT;
EXEC SQL DESCRIBE OUTPUT STMT1
USING DESCRIPTOR GLOBAL 'output_111';
/* Get count of output parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'output_111'
:unOutputCount = COUNT;

Hi,
Welcome to Oracle OTN Forums!
I changed your code a little. I think this help you
CREATE OR REPLACE
PROCEDURE xx_test
IS
v_pid VARCHAR2(100);
v_cn VARCHAR2(100);
v_id VARCHAR2(1000);
v_val VARCHAR2(1000);
CURSOR C1
IS
    (SELECT product_id, 'PRODUCT_ID' cn
        FROM product1 );
BEGIN
    FOR V1 IN C1
    LOOP
      FETCH C1 INTO v_pid, v_cn;
      dbms_output.put_line('==== '||v_pid||'==== '||v_cn);
      EXECUTE IMMEDIATE
      'SELECT product_id, DECODE(COUNT (product_id),1,MAX (product_id))||'''||V_CN||''' as val
        FROM product1
       WHERE product_id =:a
       GROUP BY product_id)' INTO v_id, v_val USING v_pid;
      dbms_output.put_line('==== '||v_id||'==== '||v_val);
      EXECUTE IMMEDIATE 'UPDATE product2 SET '||v_cn||' = ' ||''''|| v_val ||''''|| ' WHERE product_id = :b' USING v_pid;
      dbms_output.put_line('++++ '||v_cn||'++++ '||v_val||'++++ '||v_pid);
    END LOOP;
END xx_test;

MMS not working when connected to wifi

My problem is similar to this recent post about the S5:
MMS Problems with Samsung S5
It started this morning (Wednesday, 6/11/14). I have sent and received MMS messages seamlessly until about 8:00 this morning. Now, if I am connected to a wifi network, but do also have data enabled, I cannot send or receive MMS messages. When sending, it just hangs and doesn't send until I disable wifi. When receiving, I get a message wanting me to click "download", but when I do, nothing happens. Turning off wifi makes both messages go through immediately.
I understand that MMS messages do not go through wifi, but, as I said, until this morning they could go over the data network as needed even when I was connected to a wifi network. The change was sudden, and I'm not aware of anything that changed with my wifi connection or my phone, though my apps do typically auto-update, and I don't know which, if any, may have auto-updated this morning.

trimandjen2
Sorry to hear about any trouble with your picture messages! Let's get everything back up and running for you. Is mobile data still turned on when you're connected to WiFi? If so, can you try using the Google Hangouts application for your messaging instead? I'd like to test if this will allow you to receive picture messages even when on WiFi. Keep us posted!
RuthW_VZW
Follow us on twitter @VZWSupport

Nano6th-Speakers not working when connecting to Nano

My new Ipod Nano(6th Gen) does not work with the speakers i have that i had used with my Ipod Nano (1st gen). Speakers are in working condition-Anyone know why? Does the my new nano(6thGen) require different speakers?

2 days ago, we have added 4th node to the existing 3node RAC. Is that given any issues.
below are the things i checked.
$->srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node qysqalccoredb01
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node qysqalccoredb03
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node qysqalccoredb02
$->srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node qysqalccoredb01
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node qysqalccoredb03
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node qysqalccoredb02
why it is not running on 4th node. Please let give some ideas.

ITunes doesn't find Airtunes when connected with cable, only WiFi

I have an Apple TV with Airtunes enabled. But apparantly, it's not possible to connect to it from PC's who are connected to LAN with cable instead of WiFI? Does anyone know why?
More details:
I have 3 PC's:
PC 1: , Windows 7 64-bit with iTunes 9.1.1.12 (latest)
Stationary, connected to LAN using cable in a Gigabit switch
PC 2: 100% fresh install of Windows 7 32-bit and iTunes 9.1.1.12
Stationary, connected to LAN using cable in a Gigabit switch
PC 3: Win 7 32-bit with iTunes 9.1.1.12
Netbook - connected through WiFi
Apple TV device (latest firmware) is connected to same LAN using cable as well. *All PC's can ping the Apple TV without problems.*
So the problem is that iTunes doesn't find the Airtunes device (the output dropdown selector doesn't show up). I first tried on my main PC (PC1). It didn't work, so i tested on PC2 (wich is a fresh install of both OS and iTunes!), but same problem there.
But then the weird thing happened. I tried to install on my netbook, and it worked! Only difference is that the netbook was connected through WiFi. I don't see why that would matter, but just for fun i tested to disconnect WiFi, and connect with cable and boom - airtunes selection dissappeared! As soon as I disconnected the cable and reconnected WiFi, it appeared again.
Why on earth would Airtunes only work on WiFi? As you can see on this screenshot, network configuration is equal on Wifi and cabled connection. (Apple TV has IP 10.0.1.30)

It's supposed to be able to cope with slightly different file & folder structures, missing track numbers, all tracks in just an artist folder, everything in Unknown Artist\Unknown Album etc. Details here. Can you give me an idea of how things are set out? Maybe it needs a little tweak to cope with the way you've done things, or we could use something like MediaMonkey to reorganize what you have into something the script can work with.
I'm going to be out for much of the day but I'll look in on this thread later.
tt2

Why cant send or receive imessage when connected my my home wifi network?

i can receive or send an imessage whn connectd to my home wifi network... it works when using other wifi networks..

same here, @ other network it works, then at home it works fore a limmited time, but then it has the same problem again. it stops working

Hyper-V vSwitch external connection not working when connected to 100mb switchport

I added 2 new servers to my existing Hyper-v 2012 server core failover cluster and there are many physical network connections on these servers. One of the network connections on the new servers goes to a switch that doesn't have any additional 1gb
connections and only has 100mb ports available. The existing servers are connected to 1gb ports and they work fine. The new servers are connected to the 100mb ports and when the host is setup with an IP on that network, I can ping other devices
just fine but when I setup a vswitch connected to this external network adapter and share it with the host, I can ping between a Guest VM and the host but I can't ping on the external network. So it appears that a Hyper-v vswitch doesn't autonegotiate
with an external network connection that is set for autonegotiate on the switch but limited to 100mb. I switch the cables between a server that ha 1gb connection put it into the new server and it communicates just fine but the old server won't communicate
on 100mb port.
Does anyone know how to setup the vswitch external network connection so that it will communicate on a 100mb external network?

Hi Sir,
>>The new servers are connected to the 100mb ports and when the host is setup with an IP on that network, I can ping other devices just fine but when I setup a vswitch connected to this external network adapter and share it with the host, I can ping
between a Guest VM and the host but I can't ping on the external network.
First , please try to test (I assume that there is no vlan settings in your LAN):
1. create an external virtual switch and click "Allow management operating system to share ... " without Vlan setting
2. do not connect any VM to this external virtual switch just Host's virtual NIC
3. try to access other computer in the LAN
Any further information please feel free to let us know .
In addition , please check if there is any configuration on that 100Mb switch port .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Maps not working when connected to local-only WiFi network

Similar Messages

Maybe you are looking for