Maps problem after PR 1.2

Hi all after update to PR1.2 I have problem with maps loader, when I connect to maps loader said maps is out of date and when I try to update I get error

download the new ovi suite 2.2 from nokia, and use the built in maps loader from there.

Similar Messages

C7 map problem after update

I just updated my map on c7 with the latest map( enhanced drive navigation) and new icons were created but on clicking the map icon it tells me feature not supported. Can anyone offer me a solution

To everyone who had a problem after installing the optional "Maps update with Enhanced drive" of "Feature not supported" and Maps no longer working like I had on Simian Anna, this is what you need to do:
1) A soft/hard reset,backup restore or even reinstalling current firmware will not work.
2) Uninstall the following from Application Manager/Installed apps :
a) Nokia Maps
b) Nokia Maps ODML
c) ODML Commons Repository
d) Nokia Maps suite installer.
You may have all or just 1-2 of these, delete all which you have. You can leave optional like Check-in or Weather/places intact.
3) Reboot your phone
4) Download the 3.06 version of maps available through OVI store or the 3.08 version for Anna (ONLY the Anna version if ur running Anna, the Belle one will mess it up, so be careful) from Nokia Beta Labs (either is ok, I did 3.06 and THEN 3.08 beta)
5) After installing, it will open up automatically
6) your old maps should be intact (mine were), or do a fresh download
Tell me how it works guys, was really worried when my Maps got messed up and spent 3 hours doing all sorts of restore before figuring out how to do it..Now everything is OK!!
Moderator note: You can't disclose personal info on any public sections of the forum

N8 Maps problem after hard reset

There have been some cases where users have used the 3-fingered hard-reset method on their N8 devices and lost Ovi Maps in the process. If you find yourself in this situation, you can now resintall Maps via the software update feature in Ovi Suite. For other apps, you may need to refer to your nearest Nokia Care point.
Please note that it is not wise in general to use the 'three-fingered suicide' as a method of troubleshooting issues with your phone, this procedure is intended to attempt to revive a device that will not boot, in which circumstances you already know that everything is going to be lost before starting.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

The following is an official statement from Nokia concerning this matter:
You
should not use the "three finger" reset (pressing volume down + camera key +
menu key and pressing power button) to hard reset the Nokia N8-00 device. Doing
this will delete some applications (Ovi Store, Ovi Maps, some preinstalled
widgets) which cannot be restored.
If the device needs to be reset, try the following methods
instead of the "three finger" reset:
Press down the power button for 8
seconds.
Restore the factory settings by selecting Menu
> Settings > Phone > Phone management > Factory settings >
Restore.
The "three finger" reset should be used only
as a last resort if the device cannot be booted up in any other way.
If
successful, the device can be used after the reset but some of the applications
are missing. The device needs to be taken to a Nokia Care point for reflashing
to get the original applications back in the
device.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

Nokia N8 maps problems after hard reset.

I quote the sticky with the same title
quote
There have been some cases where users have used the 3-fingered hard-reset method on their N8 devices and lost Ovi Maps in the process. It is not yet possible for N8 users to redownload the application from nokia.com/maps, a situation that will be fixed in the near future with a new release of the Maps application.
In the meantime, if you find yourself in this situation, please contact the Nokia Care line for your country, copies of the necessary SIS installation file have been distributed to contact centres to pass on to N8 users until the Maps web page is updated.
Please note that it is not wise in general to use the 'three-fingered suicide' as a method of troubleshooting issues with your phone, this procedure is intended to attempt to revive a device that will not boot, in which circumstances you already know that everything is going to be lost before starting.
unquote
So I went to the local Nokia care line center nearby. The technician told me in order to re install Ovi Maps on the phone I had to leave it for a few days under repair. When I mentioned that it was purely software installation (and I only needed the SIS file) and not a technical repair and I could not leave my phone behind for several days the manager mentioned this was Nokia policy. Obtaining the SIS file was not possible.
The manager himself mentioned "that is why I use an Iphone" and me as unpleased customer left this Nokia "we do not" care line center.
So be aware the if you want to have the ovi maps app reinstalled on the phone, it could well take a few days.
Nomic.

Perhaps if you go over to Nokia Beta Labs: http://betalabs.nokia.com/apps/ovi-maps-306
and ask nicely in the correct thread, you might find that kee takes pity on you. However since release of .sis file to Nokia Care Points whom can't be bothered with N8 woes as they consider carrying out a "hard reset" an own goal, they (Nokia Beta Labs) might now expect resolution via this method.
Happy to have helped forum with a Support Ratio = 42.5

Message mapping problem after RFC import in SP14

This never happened in earlier versions. If I make minor changes to RFC structures (ex: add new field) and than reimport, my mapping (in the past) needed adjustments only for the new fields. Now, all fields need to be remapped.
Anyone facing similar issues? Is there any patch for this?
Thank you.

Hi Parimala,
Even it should not happen . But even I have faced this once. But I just added some spaces and activated. It worked for me.
But if you are changing your source structure, then it usally happens. But if it is target then it is not happening.
It is just my views,
Regards,
Moorthy

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

Mapping problem in file to multiple file scenario

Hi all,
 i am doing a file to file scenario in which the occurence of target is 0 to 1 .I changed the occurence of the tatrget as 0 to 1 in message mapping.But after this change i am not getting my xml output .previously i was getting it but now in moni its showing message suceesfull but xml output is not generating its genrating only <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1 />
</ns0:Messages>.....In moni before message mapping i am getting all my xml input but after message mapping its not generating xml output .All other mapping is one to one...just i have to check if one structure occurs in input file then it has to generate the output file(even if i copy the input from moni to IR then its work there) .it was working when i had not changed the occurence as 0 to1...Please guide me to crack this problem.
Regards,
Saurabh

Hi Raj/Swarup,
 my input str is MT_ANALYSIS
 Recordset
 Rsetxt
 field1
 field2
 Rseche
 field1
 field2
output str is:MT_HEADER
 Header
 field1
 field2
MT_HEADER file(o/p) is created if Rsetxt occurs in inbound str
i used creatif & exist standard function to achieve it. It was creating the xml output when Rsetxt occurs ,but the problem was when it does not occurs it was throwing error as the occurence of MT_HEADER was bydefault 1,when i changed the occurence in message mapping to 0 to 1 then two extra structre messages
 message1 occured in my mapping and it was not genrating any output xml,that i checked in moni.I message mapping(test) it is working and creating the xml with the same input.I am totally confused with this strange problem.
Regards
Saurabh

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Mapping problems

Hi,
I posted this thread in Designer section but I think this place is more appropriate.
I have a mapping problem. In my process I have two forms with the same xml schema binding to this forms.
The first form is prefill with his informations (name, division, email etc ...), his superior informations and he can choose and fill a new superior.
Once the form is fill and send, the new superior received the form with the completed informations.
I use a setValue to extract the name of the superior and to associate it with an Assign Task and map the data of the first form into the second form and it works.
After the second form is approved, I need to exctract some other informations but whatever I can do, all the values are null. However when I extract data from the form with the function xfa.host.exportData(); the data xml is fill with the correct information.
In my first setValues I map the field login of my form with this xpath :
location expression
/process_data/@nplusun /process_data/FormInit/object/data/xdp/datasets/data/FormulaireA/Nouveau/login
and the data
/process_data/FormEtape2/object/data/xdp/datasets/data /process_data/FormInit/object/data/xdp/datasets/data
It works.
In my second setValues I do :
location
/process_data/@name /process_data/FormEtape2/object/data/xdp/datasets/data/FormulaireA/Ancien/NomPrenom
I try with serializable, with an xml variable associated to the same schema than my form.
Thank You for helping me

Ok I find the answer to my problem. It seems that I need to map the field one by one because if I map like this /process_data/FormInit/object/data/xdp/datasets/data to /process_data/Form2/object/data/xdp/datasets/data when I export data from the form2 I have this : /><FSFORMQUERY_ >/Jeudi26/Formulaires/FAWSv2.pdf</FSFORMQUERY_ (form A) and this /><FSFORMQUERY_ >/Jeudi26/Formulaires/FAWSv2Etape2.pdf</FSFORMQUERY_ (form B) I don't understand why. Mapping field one by one works. If someone can explain it to me, I thank you.

WRV200 port mapping problems.

I did the port mapping to enable direct IP dialing from Linksys PAP2 VoIP adapter. It worked fine, untill I replaced the old router with a new WRV200.
The funny thing is the mapping works for some time, then it stops to work. To bring it back to work I have to restart the WRV200 router.
Everything worked fine with old Digitus DN-11005 router. I did not changed the settings in the PAP2 adapter. And, I used the same port mapping settings with WRV200 router. The PAP2 is set to DHCP and static IP is set through static DHCP client list in WRV200.
The only change from the old Digitus LAN settings is a different subnet IP. The old one was 192.168.123.0 the new one is 192.168.122.0
The direct IP dialing is done through WAN of the local Internet service provider. Both locations had the same Digitus router and PAP2 adapters installed with the same port mapping and PAP2 adapter settings. Now with one router changed to WRV200 the system does not work correctly. It looks like the port mapping in WRV200 stops working in about an hour after last usage of this feature.
Static CP Client Lis

I've been busy playing with the issue. Looks, like it is not the port mapping issue, after all.
The LAN is constructed from the WRV200 router and a Surecom EP-805SX 5 port switch connected to one of the router ports. The PAP2 adapter is connected through the switch.
When the PAP 2 appears to be locked it does not make outside calls, and it does not receive them. SIP registering does not work, as well. So, the communication with Internet does not work. In the same time, I can access the web config page of the PAP adapter. To bring everything back to normal I need to pull out and back in one of the WRV200 LAN port plugs. So, reseting of the whole router is not necesary, because disconnecting one of the LAN ports does the trick. What is bugging me is, it works with any of the 4 LAN ports. It does not have to be the LAN port the PAP2 is connected with.
I've noticed, also, a computer connected to the same switch the PAP is connected with has some problem to communicate with the DHCP server of the WRV200 router, from time to time.

ACE Problem after restarting Application

Hi,
we have an ACE20 and have set it up to balance 4 Containers on a Oracle Application Server. Every time we stop all Containers at the same time for longer than an hour it takes forever (hours) until the Load Balancer starts balancing the Containers again. I can see that the ACE Module is checking the Containers in the Apache Logfiles on the Application Server and gets a 200, but still we can't access the Application for a few hours. If I connect direct to the Container it also works fine... just the ACE does not work. Like it has a timeout and is waiting.
Any idea how to give it a kick?
While accessing the Application I can see that it connects, but nothing happens...
sh conn detail
total current connections : 2
conn-id    np dir proto vlan source                destination           state
----------+--+---+-----+----+---------------------+---------------------+------+
68155      2 in TCP   191 10.200.101.73:35777   10.200.101.64:80      ESTAB
          [ idle time   : 00:00:18,   byte count : 888        ]
          [ elapsed time: 00:00:18,   packet count: 3          ]
68156      2 out TCP   195 10.200.105.33:80      10.200.101.73:35777   INIT
          [ conn in reuse pool : FALSE]
          [ idle time   : 00:00:18,   byte count : 0          ]
          [ elapsed time: 00:00:18,   packet count: 0          ]
Thanks for any help!
Jason

Hi,
I'm still having problems with the ACE Laodbalancer. At the moment it doesn't seem to recover after having restarted the Application the last time.
Can someone look at the Config and tell me if they see a mistake in it?
I have three instances accesst, accesst2 and accesst3. Each instance has 4 Oracle Application Server Containers Deployed on 2 different Apllication Servers. The Site is split between 2 DMZ which are seperated by a Firewall. The Cisco Ace has one leg in each vlan (191 and 195). We always had a problem after taking the Applcation Servers down Updates that it takes forever untill the ACE Server starts blancing agian. For the last 4 Days it hasn't started reblancing yet. As far as I know nothing has changed in the Configuration of the Server or of the ACE. The Firewall Admin said he tried t find a problem, but didn't change anything.
Do I maybe have a mistake in the ACE Config? Am I missing something here?
MS4_ACE_PU/MY-APP# sh running-config
Generating configuration....
logging buffered 7
access-list anyone line 8 extended permit ip any any
probe http HEAD_1
port 7791
interval 10
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_2
port 7792
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_3
port 7793
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_4
port 7794
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_5
port 7795
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_6
port 7796
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_7
port 7797
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_8
port 7798
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
parameter-map type http PERSIST-REBALANCE
persistence-rebalance
action-list type modify http LOCATION-RW-VIP-2
header rewrite response location header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP-1
header rewrite response content-lokation header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
header rewrite response location header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP
header rewrite response location header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
rserver host server103
description KS ApplicationServer
ip address 10.200.105.33
inservice
rserver host server104
description KS ApplicationServer
ip address 10.200.105.34
inservice
serverfarm host HTTP-APPL
rserver server103 7791
      probe HEAD_1
    inservice
rserver server103 7792
    probe HEAD_2
    inservice
rserver server104 7791
    probe HEAD_1
    inservice
rserver server104 7792
    probe HEAD_2
    inservice
serverfarm host HTTP-APPL-1
rserver server103 7795
    probe HEAD_5
    inservice
rserver server103 7796
    probe HEAD_6
    inservice
rserver server104 7795
    probe HEAD_5
    inservice
rserver server104 7796
    probe HEAD_6
    inservice
serverfarm host HTTP-APPL-2
rserver server103 7797
    probe HEAD_7
    inservice
rserver server103 7798
    probe HEAD_8
    inservice
rserver server104 7797
    probe HEAD_7
    inservice
rserver server104 7798
    probe HEAD_8
    inservice
sticky http-header TranSON_Cert_Subject group1
replicate sticky
serverfarm HTTP-APPL
sticky http-header TranSON_Cert_Subject group2
replicate sticky
serverfarm HTTP-APPL-1
sticky http-header TranSON_Cert_Subject group3
replicate sticky
serverfarm HTTP-APPL-2
class-map type http inspect match-any HTTP-INS-VIP
2 match header Host header-value "accesst.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-1
2 match header Host header-value "accesst2.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-2
2 match header Host header-value "accesst3.my-site.de"
class-map match-all HTTP-VIP
2 match virtual-address 10.200.101.64 tcp eq www
class-map match-all HTTP-VIP-1
2 match virtual-address 10.200.101.68 tcp eq www
class-map match-all HTTP-VIP-2
2 match virtual-address 10.200.101.69 tcp eq www
policy-map type loadbalance first-match HTTP-SF
class class-default
    sticky-serverfarm group1
    action LOCATION-RW-VIP
policy-map type loadbalance first-match HTTP-SF-1
class class-default
    sticky-serverfarm group2
    action LOCATION-RW-VIP-1
policy-map type loadbalance first-match HTTP-SF-2
class class-default
    sticky-serverfarm group3
    action LOCATION-RW-VIP-2
policy-map type inspect http all-match INS-PM-VIP
class HTTP-INS-VIP
    permit
policy-map type inspect http all-match INS-PM-VIP-1
class HTTP-INS-VIP-1
    permit
policy-map type inspect http all-match INS-PM-VIP-2
class HTTP-INS-VIP-2
    permit
policy-map multi-match SLB-logic
class HTTP-VIP
    loadbalance vip inservice
    loadbalance policy HTTP-SF
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-1
    loadbalance vip inservice
    loadbalance policy HTTP-SF-1
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-2
    loadbalance vip inservice
    loadbalance policy HTTP-SF-2
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
    appl-parameter http advanced-options PERSIST-REBALANCE
interface vlan 191
ip address 10.200.101.65 255.255.255.0
alias 10.200.101.67 255.255.255.0
peer ip address 10.200.101.66 255.255.255.0
access-group input anyone
service-policy input SLB-logic
no shutdown
interface vlan 195
ip address 10.200.105.65 255.255.255.0
alias 10.200.105.63 255.255.255.0
peer ip address 10.200.105.66 255.255.255.0
access-group input anyone
no shutdown
Destination         Gateway          Interface         Flags
10.200.101.0/24     0.0.0.0          vlan191           IA [0x30]
10.200.105.0/24     0.0.0.0          vlan195           IA [0x30]

Maps problem after PR 1.2

Similar Messages

Maybe you are looking for