Maps shows incorrect postal code

The maps app shows an incorrect postal code for my address. It is showing the one for the block next to my house - maybe it's because I live on a corner lot. Is there any way this can be fixed? Google maps shows the correct postal code.

Yes, Google maps shows the correct postal code.
I am trying to use "remind me at a location" in the "Reminders" app. I have two choices for my home location: one with my correct street address and incorrect postal code, and one with another address in the neighbourhood that uses the same postal code (which is correct for that street address). I don't think there should be two addresses, but, nevertheless, I choose the one that has my street address and incorrect postal code. The reminder does not alert me.
I have contaced the map developers through "report a problem" in the app, but they must get many reports, so who knows how long it will take to correct the problem if they can even do it!

Similar Messages

IOS 6, drop the pin in the maps to your known locations and get the incorrect postal code. Thumbs up if I am right. :)

The maps gives me wrong information for the postal code all the time.
Please make sure the postal code twice before you use it for any legal purposes.

Could you be a little more specific? I took that section out of my CSS file but the problem persists.
Thank you.
Sincerely,
Michael Yannetta
Mio Web Designs
530-414-3313
[email protected]

Ovi Maps cannot read postal codes?

I have a big problem with the functionality of Ovi Maps. All my addresses in my address book have postal codes (zip codes). When I click on the address in my Nokia N8 address book Ovi Maps opens but cannot find the address. When I edit the address in Ovi Maps and remove the postal code, then it will find the address. Why can’t Ovi Maps handle (or ignore!) postal codes?

hmmm... do not know what is going on.....
in Germany, i did search with postalcode information on the weekend, but it failed. So i did not use the postalcode and search (offline) was fine.
Now that i found this thread, i did test it again... and the same search-string worked fine.
hmmmm...... do not know what is different now... except that i am now much more far away from the adress i am searching for....

Power Map Locations for Canadian Postal Codes showing incorrectly

I see great potential in the possibilities of using Power Map. However the location for one Canadian postal code is showing incorrectly on the resulting map. I have verified that the postal code itself is correct and my data has been entered correctly and
it is below:
N6K 0B3
It is showing nowhere near where it is supposed to be. Users of the application have to have confidence that the mapping behind it is correct. I need to create maps for each poll for volunteers to retrieve
the signs post-election and don't want to send them to the wrong locations.
By the way, why is my font size changing if I modify the text in my post?
Thanks,
Lila

Ahh Geolocations are fun, aren't they!
Bing maps is showing N6K 0B3 as just south west of London, ON. Google maps shows it north of there, West of London. If Bing is not correct, you'd need to request a fix from Bing/Microsoft.
While you wait for that, you'd have to create your own kludge to correct it:
CASE WHEN postcode = 'N6K 0B3' THEN geography::Point(-81.437296,43.0041629,4326) ELSE bingsGeospatial as geoPoint
I was in talks with Canada Post regarding acquiring their geo location data for post codes a while ago. You can get a product from them for about 7500 a year. I was rather disappointed to find they only provided points, and not bounding boxes (as google
maps does).

New Canadian Postal Code

There is a new postal code in Canada that is not yet showing up on Bing Maps. Can the new postal code for LEVIS, QC G6W 0M4 be added to Bing Maps geo-location
information, please? Thank you.

I have verified that this is a new postal code and have sent this to our data providers to have it added to Bing Maps.
http://rbrundritt.wordpress.com

How do I validate a postal code format?

I am trying to use actionscript check a string to see if it
is in a valid Canadian postal code format (ie.
M5R1X2).
The format is 6 characters and is always
Letter,Number,Letter,Number,Letter,Number.
Can anyone help me check each character in a string to see it
they are numbers or letters?
Any help would be appreciated.
Thanks,
Tim

checkPCode = function () {
var st:String = arguments[0];
if (arguments[0].length == 6) {
for (var i = 0; i<arguments[0].length; i++) {
t = st.charAt(i);
switchCheck = (i%2 != 0) ? "Even" : "Odd";
if ("Odd" == switchCheck) {
detect = isNaN(t);
} else {
detect = (isNaN(t) == false);
if (!detect) {
break;
return detect;
} else {
return false;
trace(checkPCode("A3M5T3T"));//correct format and incorrect
length
trace(checkPCode("A3M5T3"));//correct format and correct
length
trace(checkPCode("A335T3"));//incorrect format and correct
length

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

# sign in postal code field.

Hi Experts,
In ADRC table entry for an addr number, there is # sign in postal code field (NG26BJ#).
And due to this incorrect # sign, there are issues occuring in the system.
Can you suggest where do I search for this # sign in the system?
I mean I searched for customer master, vendor master, etc but could not find out # sign in any partner data postal code field.
Please suggest.
-Chetan.

Check all the tables that are on 'where used' list for ADRNR data element in dictionary (SE11).
If it is an "orphaned" record, BW interface should not be actually pulling it in. I would recommend to base the interface on the main table (e.g. KNA1) and only pull ADRC records that are referenced.
The easiest solution would be to write an ABAP report to update the record directly in the database. I wouldn't delete it though, just removed the # sign. Also check the OSS notes or send a message to SAP and they might provide such report for you.

When I click on my address in my contact entry Google maps show diferent point at the map

Please,
On iPhone 4, iOS 5, When I click on my address in my contact entry Google maps show diferent point at the map

Do you have a WiFi only iPad?
If yes, go to another site, like say a Starbucks, connect to their internet and click on the arrow to show your location. If it is correct then your router is reporting incorrect information. Wait and the database will eventually be updated.

Functions for mapping Latin-1 character codes to and from WinLatin-1 character codes

HI ALL
I will like to know how could i write own functions for mapping Latin-1 character codes to and from WinLatin-1
character codes.
Can show me some source code or how to mapping it. Because i just begineer.
Hope you able to help me..

I see your issue. I tried to reproduce this issue using sqlplus.
Setup NLS_LANG as you mentioned using WE8ISO8859P1 and connect to a UTF8 db.
[oracle@server ~]$ locale -a | grep en_US
en_US
en_US.iso88591
en_US.iso885915
en_US.utf8
[oracle@server ~]$ export LC_ALL=en_US.iso88591
[oracle@server ~]$ locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.iso88591"
LC_NUMERIC="en_US.iso88591"
LC_TIME="en_US.iso88591"
LC_MEASUREMENT="en_US.iso88591"
LC_IDENTIFICATION="en_US.iso88591"
LC_ALL=en_US.iso88591
[oracle@server ~]$ echo $NLS_LANG
AMERICAN_AMERICA.WE8ISO8859P1
SQL> select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
AL32UTF8
SQL> select nchr(223) from dual;
NCHR
ß
SQL> select chr(223) from dual;
ERROR:
ORA-29275: partial multibyte character
SQL> SELECT CHR (223 USING NCHAR_CS) from dual;
C
ß
SQL> select CONVERT('ß', 'WE8ISO8859P1','UTF8') FROM DUAL;
CO
SQL> select CONVERT(CHR(223 USING NCHAR_CS), 'WE8ISO8859P1','UTF8') FROM DUAL;
select CONVERT(CHR (223 USING NCHAR_CS), 'WE8ISO8859P1','UTF8') FROM DUAL
ERROR at line 1:
ORA-12703: this character set conversion is not supportedI found that beta is in WE8ISO8859P1 character set
here[url http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch2charset.htm#NLSPG164]What Characters Does a Character Set Support?
But I don't really understand whats the problem in the conversion.

0weekday1 is showing incorrect values

Hi,
After the upgrade it has been noticed that the Time characteristic 0weekday1 is showing incorrect text mapping in Bex Reports reports.
After analysis and Investigation I found that
In master data it is maintained as follows which is correct
1 - Sunday
2 - Monday
3 - Tuesday
4 - Wednesday
5 - Thursday
6 - Friday
7 - Saturday
But In the multiprovider, when I do F4 on the filed 0weekday1 it is showing the following values
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday.
In RSRV it is showing inconsistencies but when I tried to do the correction it is failing.
I have done the info Object repair for 0weekday1 in RSD1. but still the values have not changed.
Please suggest resolutions to this !!!
Thanks,
Shantanu.

Hi,
When I see the master data it is maintained properly as stated above.
But, when I checked the Master Data Read class, it is found that the data is coming from T246 table which is SAP maintained table. And the entries made in T246 table are the one which are incorrectly mapped.
So, my questions are:
1. Can we change the values directly in T246 table.
2. What other programs/objects, etc will be impacted.
3. Do we have something as "Where used list" for the Tables.
Thanks,
Shantanu.

Display address omitted postal code for all countries in sapscript

Hi everyone
Does anyone know how to omit the postal code for all countries(eg. US ) when displaying address in sapscript form?
I want to avoid to display postal code even the country is US.
coz my firm doesn't want to show postal code.....
Also, how to use combination keys of PRIORITY parameter?
For example, if i want PRIORITY '1' 'S' 'L' 'N' 'C'
I cannot write like this as following....
/: ADDRESS DELIVERY PARAGRAPH AS PRIORITY 1 S L N C LINES 5
/: ADDRESSNUMBER &VBDKR-ADRNR_WE(K)&
/: FROMCOUNTRY &VBDKR-SLAND&
/: ENDADDRESS

Hi,
Bold text describes the usage of Priority.
ADDRESS: Formatting of addresses
The command ADDRESS - ENDADDRESS formats an address according to the postal standards of the
destination country defined in the parameter COUNTRY. The reference fields are described in the
structure ADRS. Both constants and symbols can be assigned to the parameters.
Syntax:
/: ADDRESS [DELIVERY] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: STREET street
/: POBOX PO box [CODE zip code]
/: POSTCODE zip code
/: CITY town1[,town2]
/: REGION region
/: COUNTRY country
/: FROMCOUNTRY from country
/: ENDADDRESS
Both formatting data and address data are given as parameters. Address data is formatted for output in accordance with the parameters COUNTRY, PRIORITY and LINES. If available, the P.O. box is used instead of the street as the default.
DELIVERY: Defines the street address. If this parameter is selected, the system prints the street address on the layout output instead of the P.O. box.
PARAGRAPH: Defines in which paragraph format the address is output. If the parameter is not defined, the address is output in the default paragraph format.
PRIORITY: Defines which address lines can be omitted if necessary. You can enter a combination of the following values:
A form of address
P mandatory blank line 1
Q mandatory blank line 2
2 name2
3 name3
4 name4
L name of country
S line for the street
O line for the city

LINES: Defines how many lines are available for formatting the address. If all the address data cannot be formatted due to an insufficient number of lines, the data entered in the parameter PRIORITY is omitted. If the LINES specification is missing and this command is in a layout set window whose type is not MAIN, the lines available for the address layout are then calculated automatically by means of the current output line item and window size.
TITLE: Required form of address.
NAME: Up to four separate names, separated by commas, can be defined.
STREET: Street specification including address number.
POBOX: Post Office box number.
CODE: P.O. box Postal or ZIP code if it is different from the postal code of the city.
POSTCODE: Postal or ZIP code of the city.
CITY: Up to two place names can be defined.
REGION: Determines the administrative area.
COUNTRY: Specifies the country according to whose specific postal standards the address is formatted.
FROMCOUNTRY: Defines in which language the name of the destination country is formatted. In EC countries, only the international country identification letter is put before the postal code with a hyphen.
Example:
/: ADDRESS
/: TITLE Company
/: NAME Widget Technology, Inc., All Kind of Widgets
/: STREET 1005 Lido Lane
/: POBOX 2935 CODE 94400
/: POSTCODE 94404
/: CITY Foster City
/: REGION CA
/: COUNTRY USA
/: FROMCOUNTRY USA
/: ENDADDRESS
Generates the following address:
Company
Widget Technology, Inc.
All Kind of Widgets
PO box 2935
Foster City, CA 94400
If the supplement DELIVERY is specified for the command ADDRESS, then the street is entered instead of
the PO box.
Company
Widget Technology, Inc.
All Kind of Widgets
1005 Lido Lane
Foster City, CA 94404
Regards,
Sailaja.
Reward points if answer helps you.

Populating postal code field

Tried inputting first 3 characters of my postal code as requested but keep getting a '8-2' error code. The site's web master says I needed to download a current Mac security update. I did that, but am still having the same problem

HI,
Empty the Safari Cache from the Safari Menu Bar, Safari/Empty Cache... then relaunch Safari. Try that site. If you still have problems, go to Safari/Preferences then select the Security tab. Click the Show Cookies button. Delete the website url, then click Done. Now click the Autofill tab. Click the Edit button next to: Other forms. Delete that website .name.com and click Done.
Relaunch Safari.. try that website.
Carolyn

Customer no moving into GTS due to Postal code error.

Hi
I need your help. While pushing customer form R/3 in to GTS it's showing ZERO partner process. Then I checked in GTS in the BP logs it showed me that postal code has to contain 7 digits.
But in R/3 customer master record it's taking only 6 digits it has set up accordingly. So it's not accepting 7 digits. So what could be the setting so that I can look into it ?
Thanks in Advance.
Best Regards
Sits

Hello Sits,
check in GTS customizing
IMG --> SAP NetWeaver --> General Settings --> Set Countries --> Set Country-Specific Checks.
In here are country specific checks. One of them is also length of postal code.
Check whether for the country of your customer is 7 digit required for the postal code. Then change it to 6.
Best regards,
Gabriel.
PS: To be sure your countries in GTS are aligned with the Feeder use simple "adjustment" in the Utilities to compare/change via RFC to ERP..

Resource map is incorrect

I have a file showing a quicktime icon in a Final Cut Pro 5 folder. When I try to open it in Quicktime I get a resource map is incorrect error. Trying to open it in FCP5 give a general error.
What is a resource map is incorrect error and what would cause it?
Any to correct it?
Thanks

The "Google" in my post above contains the search parameters that I put into Safari.
I entered "resource map quicktime" -without the quotes. Maybe it only works properly if you use Safari as that is also part of the URL:
http://www.google.com/search?client=safari&rls=en-us&q=resourcemapquicktime&ie=UTF-8&oe=UTF-8
The link to the thread here on AD was: http://discussions.apple.com/thread.jspa?messageID=6141662
Depending on the browser, you might have to right click, choose copy link and paste it in the address bar.

Maps shows incorrect postal code

Similar Messages

Maybe you are looking for